Locomotives
Kit without drive.
On order, lead time to be confirmed
Double-bay locomotive shed with timber framing and gates in real wood. Based on an existing prototype of the Schönborn-Dreiwerden mining railway in the middle Zschopau valley (Saxony). Specifically designed for mining railways in H0i/H0f. Gates that open. Clearance height approx. 33 mm, clearance width 22 mm. Distance from centre of rail to centre of rail approx. 32 mm. Length of the vehicle hall inside approx. 90 mm. Kit.
On order, lead time to be confirmed
Era 3, DR, Rbd Dresden, Bw Riesa As “Frankfurt 5903”, this locomotive came into the world in 1920 at Henschel & Sohn in Kassel. After many assignments in northern Germany, it was transferred in 1947 to the Reichsbahn directorate (Rbd) Dresden. After 12 years in service it was stored in 1959 and stripped as a source of spare parts. Information on the model: Completely new developments Love of detail Precise construction Flawless technical execution Newly developed Lenz decoder for analogue and digital operation without conversion Sound and loudspeaker included Minimum locomotive-to-tender distance of 1.7 mm Extremely fine wheel tyres, only 0.7 mm high Cab and motion lighting Integrated smoke generator Free-standing pipework, handrails and shunting steps Information on the prototype: Origin and design The locomotives of classes 56.1 and 56.20 were originally developed from the Prussian G12 (later class 58). The three-cylinder motion was first used for the development of the BR 56.1 (Prussian G8.3). With only just over 80 locomotives, this was not yet the best variant. After the changeover to a two-cylinder motion, the newly developed BR 56.20 (Prussian G8.2) proved convincing. It had a 1'D wheel arrangement, meaning one leading axle at the front and four coupled wheels. Technical data The locomotives of these classes reached a top speed of 65 km/h and had a driving wheel diameter of 1400 mm. Later modifications allowed speeds of up to 75 km/h, so that they could also be used on lighter passenger services. Service and stationing The locomotives of classes 56.1 and 56.20 were not only found throughout Germany. In the turmoil of the war, some of them went as far as Latvia and were partly stationed there. The division into two German states also took both classes to the respective railways. However, the Deutsche Bundesbahn took over considerably fewer locomotives than the Deutsche Reichsbahn in the East. After long years of service, the first locomotives of class 56.1 were withdrawn as early as the 1950s. The last elderly ladies of class 56.20 managed to hold out until shortly before the new computer numbers were allocated in 1970. On paper, a handful of locomotives were even renumbered.
On order, lead time to be confirmed
Era 3, DR, Rbd Erfurt, Bw Vacha The 56 2001 was the first locomotive of this class to go into series production and one of the last two to be withdrawn. From 1961 the locomotive belonged to the Reichsbahn directorate (Rbd) Erfurt, locomotive depot (Bw) Vacha. Information on the model: Completely new developments Love of detail Precise construction Flawless technical execution Newly developed Lenz decoder for analogue and digital operation without conversion Sound and loudspeaker included Minimum locomotive-to-tender distance of 1.7 mm Extremely fine wheel tyres, only 0.7 mm high Cab and motion lighting Integrated smoke generator Free-standing pipework, handrails and shunting steps Information on the prototype: Origin and design The locomotives of classes 56.1 and 56.20 were originally developed from the Prussian G12 (later class 58). The three-cylinder motion was first used for the development of the BR 56.1 (Prussian G8.3). With only just over 80 locomotives, this was not yet the best variant. After the changeover to a two-cylinder motion, the newly developed BR 56.20 (Prussian G8.2) proved convincing. It had a 1'D wheel arrangement, meaning one leading axle at the front and four coupled wheels. Technical data The locomotives of these classes reached a top speed of 65 km/h and had a driving wheel diameter of 1400 mm. Later modifications allowed speeds of up to 75 km/h, so that they could also be used on lighter passenger services. Service and stationing The locomotives of classes 56.1 and 56.20 were not only found throughout Germany. In the turmoil of the war, some of them went as far as Latvia and were partly stationed there. The division into two German states also took both classes to the respective railways. However, the Deutsche Bundesbahn took over considerably fewer locomotives than the Deutsche Reichsbahn in the East. After long years of service, the first locomotives of class 56.1 were withdrawn as early as the 1950s. The last elderly ladies of class 56.20 managed to hold out until shortly before the new computer numbers were allocated in 1970. On paper, a handful of locomotives were even renumbered.
On order, lead time to be confirmed
Era 2, DRG, Rbd Halle, Bw Halle In 1930 this locomotive was fitted, as one of four machines, with pulverised-coal firing according to the Stug system (Studiengesellschaft für Kohlenstaubfeuerung auf Lokomotiven). In 1958 the Reichsbahn repair works (RAW) Cottbus transplanted the boiler of the 56 2130 onto the frame of the 56 2644, giving it a second life as a coal-fired locomotive until the 1960s. Information on the model: Completely new developments Love of detail Precise construction Flawless technical execution Newly developed Lenz decoder for analogue and digital operation without conversion Sound and loudspeaker included Minimum locomotive-to-tender distance of 1.7 mm Extremely fine wheel tyres, only 0.7 mm high Cab and motion lighting Integrated smoke generator Free-standing pipework, handrails and shunting steps Information on the prototype: Origin and design The locomotives of classes 56.1 and 56.20 were originally developed from the Prussian G12 (later class 58). The three-cylinder motion was first used for the development of the BR 56.1 (Prussian G8.3). With only just over 80 locomotives, this was not yet the best variant. After the changeover to a two-cylinder motion, the newly developed BR 56.20 (Prussian G8.2) proved convincing. It had a 1'D wheel arrangement, meaning one leading axle at the front and four coupled wheels. Technical data The locomotives of these classes reached a top speed of 65 km/h and had a driving wheel diameter of 1400 mm. Later modifications allowed speeds of up to 75 km/h, so that they could also be used on lighter passenger services. Service and stationing The locomotives of classes 56.1 and 56.20 were not only found throughout Germany. In the turmoil of the war, some of them went as far as Latvia and were partly stationed there. The division into two German states also took both classes to the respective railways. However, the Deutsche Bundesbahn took over considerably fewer locomotives than the Deutsche Reichsbahn in the East. After long years of service, the first locomotives of class 56.1 were withdrawn as early as the 1950s. The last elderly ladies of class 56.20 managed to hold out until shortly before the new computer numbers were allocated in 1970. On paper, a handful of locomotives were even renumbered.
On order, lead time to be confirmed
Era 3, DR, Rbd Dresden, Bw Riesa As “Frankfurt 5903”, this locomotive came into the world in 1920 at Henschel & Sohn in Kassel. After many assignments in northern Germany, it was transferred in 1947 to the Reichsbahn directorate (Rbd) Dresden. After 12 years in service it was stored in 1959 and stripped as a source of spare parts. Information on the model: Completely new developments Love of detail Precise construction Flawless technical execution Digital interface E24 Minimum locomotive-to-tender distance of 1.7 mm Extremely fine wheel tyres, only 0.7 mm high Cab lighting Free-standing pipework, handrails and shunting steps Information on the prototype: Origin and design The locomotives of classes 56.1 and 56.20 were originally developed from the Prussian G12 (later class 58). The three-cylinder motion was first used for the development of the BR 56.1 (Prussian G8.3). With only just over 80 locomotives, this was not yet the best variant. After the changeover to a two-cylinder motion, the newly developed BR 56.20 (Prussian G8.2) proved convincing. It had a 1'D wheel arrangement, meaning one leading axle at the front and four coupled wheels. Technical data The locomotives of these classes reached a top speed of 65 km/h and had a driving wheel diameter of 1400 mm. Later modifications allowed speeds of up to 75 km/h, so that they could also be used on lighter passenger services. Service and stationing The locomotives of classes 56.1 and 56.20 were not only found throughout Germany. In the turmoil of the war, some of them went as far as Latvia and were partly stationed there. The division into two German states also took both classes to the respective railways. However, the Deutsche Bundesbahn took over considerably fewer locomotives than the Deutsche Reichsbahn in the East. After long years of service, the first locomotives of class 56.1 were withdrawn as early as the 1950s. The last elderly ladies of class 56.20 managed to hold out until shortly before the new computer numbers were allocated in 1970. On paper, a handful of locomotives were even renumbered.
On order, lead time to be confirmed
Era 3, DR, Rbd Erfurt, Bw Vacha The 56 2001 was the first locomotive of this class to go into series production and one of the last two to be withdrawn. From 1961 the locomotive belonged to the Reichsbahn directorate (Rbd) Erfurt, locomotive depot (Bw) Vacha. Information on the model: Completely new developments Love of detail Precise construction Flawless technical execution Digital interface E24 Minimum locomotive-to-tender distance of 1.7 mm Extremely fine wheel tyres, only 0.7 mm high Cab lighting Free-standing pipework, handrails and shunting steps Information on the prototype: Origin and design The locomotives of classes 56.1 and 56.20 were originally developed from the Prussian G12 (later class 58). The three-cylinder motion was first used for the development of the BR 56.1 (Prussian G8.3). With only just over 80 locomotives, this was not yet the best variant. After the changeover to a two-cylinder motion, the newly developed BR 56.20 (Prussian G8.2) proved convincing. It had a 1'D wheel arrangement, meaning one leading axle at the front and four coupled wheels. Technical data The locomotives of these classes reached a top speed of 65 km/h and had a driving wheel diameter of 1400 mm. Later modifications allowed speeds of up to 75 km/h, so that they could also be used on lighter passenger services. Service and stationing The locomotives of classes 56.1 and 56.20 were not only found throughout Germany. In the turmoil of the war, some of them went as far as Latvia and were partly stationed there. The division into two German states also took both classes to the respective railways. However, the Deutsche Bundesbahn took over considerably fewer locomotives than the Deutsche Reichsbahn in the East. After long years of service, the first locomotives of class 56.1 were withdrawn as early as the 1950s. The last elderly ladies of class 56.20 managed to hold out until shortly before the new computer numbers were allocated in 1970. On paper, a handful of locomotives were even renumbered.
On order, lead time to be confirmed
Era 2, DRG, Rbd Halle, Bw Halle In 1930 this locomotive was fitted, as one of four machines, with pulverised-coal firing according to the Stug system (Studiengesellschaft für Kohlenstaubfeuerung auf Lokomotiven). In 1958 the Reichsbahn repair works (RAW) Cottbus transplanted the boiler of the 56 2130 onto the frame of the 56 2644, giving it a second life as a coal-fired locomotive until the 1960s. Information on the model: Completely new developments Love of detail Precise construction Flawless technical execution Digital interface E24 Minimum locomotive-to-tender distance of 1.7 mm Extremely fine wheel tyres, only 0.7 mm high Cab lighting Integrated smoke generator Free-standing pipework, handrails and shunting steps Information on the prototype: Origin and design The locomotives of classes 56.1 and 56.20 were originally developed from the Prussian G12 (later class 58). The three-cylinder motion was first used for the development of the BR 56.1 (Prussian G8.3). With only just over 80 locomotives, this was not yet the best variant. After the changeover to a two-cylinder motion, the newly developed BR 56.20 (Prussian G8.2) proved convincing. It had a 1'D wheel arrangement, meaning one leading axle at the front and four coupled wheels. Technical data The locomotives of these classes reached a top speed of 65 km/h and had a driving wheel diameter of 1400 mm. Later modifications allowed speeds of up to 75 km/h, so that they could also be used on lighter passenger services. Service and stationing The locomotives of classes 56.1 and 56.20 were not only found throughout Germany. In the turmoil of the war, some of them went as far as Latvia and were partly stationed there. The division into two German states also took both classes to the respective railways. However, the Deutsche Bundesbahn took over considerably fewer locomotives than the Deutsche Reichsbahn in the East. After long years of service, the first locomotives of class 56.1 were withdrawn as early as the 1950s. The last elderly ladies of class 56.20 managed to hold out until shortly before the new computer numbers were allocated in 1970. On paper, a handful of locomotives were even renumbered.
On order, lead time to be confirmed
A Gmeinder 15/18 diesel locomotive in open and closed versions with drivers. Locomotive length 19 mm each. Static models without drive and couplings.
On order, lead time to be confirmed
In Estrella livery, Era
On order, lead time to be confirmed
In Estrella Cargas RENFE livery, Era
On order, lead time to be confirmed
In Estrella Cargas RENFE livery, Era
On order, lead time to be confirmed
With NEM 660 digital interface
On order, lead time to be confirmed
With NEM 660 digital interface
On order, lead time to be confirmed
Digital interface E24
On order, lead time to be confirmed
E24 digital interface
On order, lead time to be confirmed
Digital interface E24
On order, lead time to be confirmed
E24 digital interface
On order, lead time to be confirmed
E24 digital interface
On order, lead time to be confirmed
Digital interface E24
On order, lead time to be confirmed
Digital interface E24
On order, lead time to be confirmed
Digital interface E24
On order, lead time to be confirmed
E24 digital interface
On order, lead time to be confirmed
RENFE, steam locomotive 5001 "Sante Fe" with original lamps and coal tender. H0 scale (1:87), era III. Minimum radius 420 mm. Close coupler mechanism. Sprung buffers.
Pre-order, release expected in May 2027