Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Locomotives

Filter products
H0 Express Train Locomotive BR S2/6 K.Bay.Sts.B.
Brawa 70144 Scale H0
H0 Express Train Locomotive BR S2/6 K.Bay.Sts.B.

Prototype Even on the inaugural runs, it was evident that the new locomotive not only fulfilled, but also surpassed all expectations. Even when operating at high speeds, it demonstrated low-noise running properties and the boiler always delivered plenty of steam to the balanced fourcylinder engine. In July 1907, the locomotive set a new speed record of 154.4 km/h on a test run between Munich and Augsburg. It was the fastest steam locomotive of its era on the entire European continent. When it was commissioned and completed its sensational record runs in 1906, the S 2/6 wore an elegant grey coat of paint. The boiler was clad with a “polished Russian iron jacket”. Model With energy storage (Digital EXTRA Version) Tender body, chassis and boiler in die-cast zinc Fully mobile tender bogie Reproduction of the model-specific tender bogie Short coupling between locomotive and tender 5-pole skew-wound motor with 2 flywheel drives True-to-scale reproduction of the underframe Fine metal spoke wheels True-to-scale lenght over buffer True-to-original reproduction of the boiler back wall Driver´s cab lighting (possibility to switch on and off with digital system) Numerous metal add-on parts Replicated rivets and hatches Filigree reversing gear

Regular price: CHF 451.15

On order, shipped within 10-15 days

H0 Express Train Locomotive BR S2/6 K.Bay.Sts.B.
Brawa 70146 Scale H0
H0 Express Train Locomotive BR S2/6 K.Bay.Sts.B.

Prototype Even on the inaugural runs, it was evident that the new locomotive not only fulfilled, but also surpassed all expectations. Even when operating at high speeds, it demonstrated low-noise running properties and the boiler always delivered plenty of steam to the balanced fourcylinder engine. In July 1907, the locomotive set a new speed record of 154.4 km/h on a test run between Munich and Augsburg. It was the fastest steam locomotive of its era on the entire European continent. When it was commissioned and completed its sensational record runs in 1906, the S 2/6 wore an elegant grey coat of paint. The boiler was clad with a “polished Russian iron jacket”. Model With energy storage (Digital EXTRA Version) Tender body, chassis and boiler in die-cast zinc Fully mobile tender bogie Reproduction of the model-specific tender bogie Short coupling between locomotive and tender 5-pole skew-wound motor with 2 flywheel drives True-to-scale reproduction of the underframe Fine metal spoke wheels True-to-scale lenght over buffer True-to-original reproduction of the boiler back wall Driver´s cab lighting (possibility to switch on and off with digital system) Numerous metal add-on parts Replicated rivets and hatches Filigree reversing gear

Regular price: CHF 559.45

On order, shipped within 10-15 days

H0 Express Train Locomotive BR S2/6 K.Bay.Sts.B.
Brawa 70147 Scale H0
H0 Express Train Locomotive BR S2/6 K.Bay.Sts.B.

Prototype Even on the inaugural runs, it was evident that the new locomotive not only fulfilled, but also surpassed all expectations. Even when operating at high speeds, it demonstrated low-noise running properties and the boiler always delivered plenty of steam to the balanced fourcylinder engine. In July 1907, the locomotive set a new speed record of 154.4 km/h on a test run between Munich and Augsburg. It was the fastest steam locomotive of its era on the entire European continent. When it was commissioned and completed its sensational record runs in 1906, the S 2/6 wore an elegant grey coat of paint. The boiler was clad with a “polished Russian iron jacket”. Model With energy storage (Digital EXTRA Version) Tender body, chassis and boiler in die-cast zinc Fully mobile tender bogie Reproduction of the model-specific tender bogie Short coupling between locomotive and tender 5-pole skew-wound motor with 2 flywheel drives True-to-scale reproduction of the underframe Fine metal spoke wheels True-to-scale lenght over buffer True-to-original reproduction of the boiler back wall Driver´s cab lighting (possibility to switch on and off with digital system) Numerous metal add-on parts Replicated rivets and hatches Filigree reversing gear

Regular price: CHF 559.45

On order, shipped within 10-15 days

H0 Diesel Locomotive BR V100 UEF
Brawa 70172 Scale H0
H0 Diesel Locomotive BR V100 UEF

Prototype With the adoption of the 1955 diesel locomotive type program, the foundation for a success story was laid at the Deutsche Bundesbahn (DB) [German Federal Railway] that, to some extent, continues to the present day. The decision was made to develop a diesel locomotive for the secondary railway service with an engine output of between 1,000 and 1,200 HP, the V100 series. Based upon the slightly older V 80, the Bundesbahn Central Office in Munich issued concrete change requests to the MaK Company in order to significantly reduce the costs for the new locomotives. By 1957, this resulting catalogue of requirements thus lead to a largely completed construction of which the Deutsche Bundesbahn ordered six trial locomotives. MaK manufactured a further locomotive at ist own cost in order to also be able to address customers other than DB. With the V100 000, the first of 744 manufactured locomotives of the V100 series left the MaK factory halls in Kiel in March 1958. Like no other locomotive series, it embodied the structural change on the railway that was inevitibly coming. In the middle of Germany's economic miracle, the crimson locomotives shaped the image of the young, modern Deutsche Bundesbahn and sent numerous old steam locomotives to the blast furnaces. The diverse applicability of all three sub-types ensured that the V100 was widely distributed throughout Germany and kept many less frequented secondary railways alive. Approximately a third of all V100 locomotives were equipped with a push-pull train control and multitraction control ex works in order to do away with the time-intensive shunting in train stations where it was necessary to turn the train around. At the beginning of the 1970s, individual locomotives started to be equipped with front-mounted snow ploughs. The first large quantities of the V100.10 (211) were only withdrawn from service at the end of the 1980s. This process only started approximately 10 years later for the V100.20 (212). A reasonably large amount were sold on to other railway companies abroad. Thanks to their reliability and robustness in particular, there are still a few locomotives in operation today after approximately 50 years of operation and are largely being used by private railway companies in Germany. For reasons of differentiation and as the V100 006 was already equipped with a 1,350 HP engine at the point of the first volume production order, all other trial locomotives as well as the recently ordered 1,100 HP locomotives were operated as the V100.10 series. At first glance, it is difficult to notice the differences between the V100.10 series and the trial locomotives. For instance, simple rods were now used in place of the bow-shaped manoeuvring handles and the lower lights were implemented as dual lights. Model Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: Sound Automatic decoupling Driver's cabin lighting Driven fans Shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.

Regular price: CHF 234.55

On order, shipped within 10-15 days

H0 Diesel Locomotive BR V100 UEF
Brawa 70174 Scale H0
H0 Diesel Locomotive BR V100 UEF

Prototype With the adoption of the 1955 diesel locomotive type program, the foundation for a success story was laid at the Deutsche Bundesbahn (DB) [German Federal Railway] that, to some extent, continues to the present day. The decision was made to develop a diesel locomotive for the secondary railway service with an engine output of between 1,000 and 1,200 HP, the V100 series. Based upon the slightly older V 80, the Bundesbahn Central Office in Munich issued concrete change requests to the MaK Company in order to significantly reduce the costs for the new locomotives. By 1957, this resulting catalogue of requirements thus lead to a largely completed construction of which the Deutsche Bundesbahn ordered six trial locomotives. MaK manufactured a further locomotive at ist own cost in order to also be able to address customers other than DB. With the V100 000, the first of 744 manufactured locomotives of the V100 series left the MaK factory halls in Kiel in March 1958. Like no other locomotive series, it embodied the structural change on the railway that was inevitibly coming. In the middle of Germany's economic miracle, the crimson locomotives shaped the image of the young, modern Deutsche Bundesbahn and sent numerous old steam locomotives to the blast furnaces. The diverse applicability of all three sub-types ensured that the V100 was widely distributed throughout Germany and kept many less frequented secondary railways alive. Approximately a third of all V100 locomotives were equipped with a push-pull train control and multitraction control ex works in order to do away with the time-intensive shunting in train stations where it was necessary to turn the train around. At the beginning of the 1970s, individual locomotives started to be equipped with front-mounted snow ploughs. The first large quantities of the V100.10 (211) were only withdrawn from service at the end of the 1980s. This process only started approximately 10 years later for the V100.20 (212). A reasonably large amount were sold on to other railway companies abroad. Thanks to their reliability and robustness in particular, there are still a few locomotives in operation today after approximately 50 years of operation and are largely being used by private railway companies in Germany. For reasons of differentiation and as the V100 006 was already equipped with a 1,350 HP engine at the point of the first volume production order, all other trial locomotives as well as the recently ordered 1,100 HP locomotives were operated as the V100.10 series. At first glance, it is difficult to notice the differences between the V100.10 series and the trial locomotives. For instance, simple rods were now used in place of the bow-shaped manoeuvring handles and the lower lights were implemented as dual lights. Model Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: Sound Automatic decoupling Driver's cabin lighting Driven fans Shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.

Regular price: CHF 451.15

On order, shipped within 10-15 days

H0 Diesel Locomotive BR V100 UEF
Brawa 70175 Scale H0
H0 Diesel Locomotive BR V100 UEF

Prototype With the adoption of the 1955 diesel locomotive type program, the foundation for a success story was laid at the Deutsche Bundesbahn (DB) [German Federal Railway] that, to some extent, continues to the present day. The decision was made to develop a diesel locomotive for the secondary railway service with an engine output of between 1,000 and 1,200 HP, the V100 series. Based upon the slightly older V 80, the Bundesbahn Central Office in Munich issued concrete change requests to the MaK Company in order to significantly reduce the costs for the new locomotives. By 1957, this resulting catalogue of requirements thus lead to a largely completed construction of which the Deutsche Bundesbahn ordered six trial locomotives. MaK manufactured a further locomotive at ist own cost in order to also be able to address customers other than DB. With the V100 000, the first of 744 manufactured locomotives of the V100 series left the MaK factory halls in Kiel in March 1958. Like no other locomotive series, it embodied the structural change on the railway that was inevitibly coming. In the middle of Germany's economic miracle, the crimson locomotives shaped the image of the young, modern Deutsche Bundesbahn and sent numerous old steam locomotives to the blast furnaces. The diverse applicability of all three sub-types ensured that the V100 was widely distributed throughout Germany and kept many less frequented secondary railways alive. Approximately a third of all V100 locomotives were equipped with a push-pull train control and multitraction control ex works in order to do away with the time-intensive shunting in train stations where it was necessary to turn the train around. At the beginning of the 1970s, individual locomotives started to be equipped with front-mounted snow ploughs. The first large quantities of the V100.10 (211) were only withdrawn from service at the end of the 1980s. This process only started approximately 10 years later for the V100.20 (212). A reasonably large amount were sold on to other railway companies abroad. Thanks to their reliability and robustness in particular, there are still a few locomotives in operation today after approximately 50 years of operation and are largely being used by private railway companies in Germany. For reasons of differentiation and as the V100 006 was already equipped with a 1,350 HP engine at the point of the first volume production order, all other trial locomotives as well as the recently ordered 1,100 HP locomotives were operated as the V100.10 series. At first glance, it is difficult to notice the differences between the V100.10 series and the trial locomotives. For instance, simple rods were now used in place of the bow-shaped manoeuvring handles and the lower lights were implemented as dual lights. Model Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: Sound Automatic decoupling Driver's cabin lighting Driven fans Shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.

Regular price: CHF 451.15

On order, shipped within 10-15 days

H0 Electric Locomotive BR EG4 K.Bay.Sts.B.
Brawa 70176 Scale H0
H0 Electric Locomotive BR EG4 K.Bay.Sts.B.

Prototype In 1912 the Königlich Bayerische Staats-Eisenbahnen started to electrify the first tracks. Out of the first 17 electric locomotives, there were two which technically speaking distinguished themselves from the conventional ones and then proved to be extremely innovative. Whilst in those days electric locomotives usually had the well known side rod drive from the steam locomotive, these two machines already had a single axle drive, as is standard practice nowadays with all modern electric locomotives. Single axle drive means that every driver axle has its own electric motor. Both locomotives were ordered in 1912 and supplied in 1914 and 1915 by Krauss (technical vehicular components) and Bergmanns Elektrische Werke (electric components). They were stationed in Freilassing and put into service on the hilly route between Freilassing and Berchtesgaden. Both locomotives were originally designated as EG4 X 1/1 in accordance with Bavarian customs. With an overall weight of 56 t they were able to produce a maximum tractive force of 9.300 kg, whilst the maximum speed was set at 50 km/h. They proved to be outstanding, a replica build of this locomotive or development of the drive concept however didn't happen initially, it was only 20 years later that the single axle drive made its breakthrough. The locomotives were obviously ahead of their time. The two Bavarian EG4 X 1/1 still existed after the First World War and had been taken over by the Deutsche Reichsbahn district management of Bavaria. After 1923 the complex designation was replaced by a simple EG 1 and after 1926 they were then allocated the E73 series for the DRG. Both locomotives were always based in Freilassing, in addition to their regular route they were also used for shunting purposes in Salzburg. At the DRG they were obviously very satisfied as well, as the locomotives were only removed from service in 1937 and 1941. One of the two locomotives was converted to a snowplough and it remained in service for many, many years. Model Technically refined and enhanced with new sound Free-standing steps and handrails Extra mounted sandfall pipes Engraved ventilator grill Finely detailed chassis Extra mounted sandbox Spring buffers Multi-part laterns Precise paintwork and painting True to original roof fittings and isolators

Regular price: CHF 207.50

On order, shipped within 10-15 days

H0 Electric Locomotive BR EG4 K.Bay.Sts.B.
Brawa 70178 Scale H0
H0 Electric Locomotive BR EG4 K.Bay.Sts.B.

Prototype In 1912 the Königlich Bayerische Staats-Eisenbahnen started to electrify the first tracks. Out of the first 17 electric locomotives, there were two which technically speaking distinguished themselves from the conventional ones and then proved to be extremely innovative. Whilst in those days electric locomotives usually had the well known side rod drive from the steam locomotive, these two machines already had a single axle drive, as is standard practice nowadays with all modern electric locomotives. Single axle drive means that every driver axle has its own electric motor. Both locomotives were ordered in 1912 and supplied in 1914 and 1915 by Krauss (technical vehicular components) and Bergmanns Elektrische Werke (electric components). They were stationed in Freilassing and put into service on the hilly route between Freilassing and Berchtesgaden. Both locomotives were originally designated as EG4 X 1/1 in accordance with Bavarian customs. With an overall weight of 56 t they were able to produce a maximum tractive force of 9.300 kg, whilst the maximum speed was set at 50 km/h. They proved to be outstanding, a replica build of this locomotive or development of the drive concept however didn't happen initially, it was only 20 years later that the single axle drive made its breakthrough. The locomotives were obviously ahead of their time. The two Bavarian EG4 X 1/1 still existed after the First World War and had been taken over by the Deutsche Reichsbahn district management of Bavaria. After 1923 the complex designation was replaced by a simple EG 1 and after 1926 they were then allocated the E73 series for the DRG. Both locomotives were always based in Freilassing, in addition to their regular route they were also used for shunting purposes in Salzburg. At the DRG they were obviously very satisfied as well, as the locomotives were only removed from service in 1937 and 1941. One of the two locomotives was converted to a snowplough and it remained in service for many, many years. Model Technically refined and enhanced with new sound Free-standing steps and handrails Extra mounted sandfall pipes Engraved ventilator grill Finely detailed chassis Extra mounted sandbox Spring buffers Multi-part laterns Precise paintwork and painting True to original roof fittings and isolators

Regular price: CHF 324.80

On order, shipped within 10-15 days

H0 Electric Locomotive BR EG4 K.Bay.Sts.B.
Brawa 70179 Scale H0
H0 Electric Locomotive BR EG4 K.Bay.Sts.B.

Prototype In 1912 the Königlich Bayerische Staats-Eisenbahnen started to electrify the first tracks. Out of the first 17 electric locomotives, there were two which technically speaking distinguished themselves from the conventional ones and then proved to be extremely innovative. Whilst in those days electric locomotives usually had the well known side rod drive from the steam locomotive, these two machines already had a single axle drive, as is standard practice nowadays with all modern electric locomotives. Single axle drive means that every driver axle has its own electric motor. Both locomotives were ordered in 1912 and supplied in 1914 and 1915 by Krauss (technical vehicular components) and Bergmanns Elektrische Werke (electric components). They were stationed in Freilassing and put into service on the hilly route between Freilassing and Berchtesgaden. Both locomotives were originally designated as EG4 X 1/1 in accordance with Bavarian customs. With an overall weight of 56 t they were able to produce a maximum tractive force of 9.300 kg, whilst the maximum speed was set at 50 km/h. They proved to be outstanding, a replica build of this locomotive or development of the drive concept however didn't happen initially, it was only 20 years later that the single axle drive made its breakthrough. The locomotives were obviously ahead of their time. The two Bavarian EG4 X 1/1 still existed after the First World War and had been taken over by the Deutsche Reichsbahn district management of Bavaria. After 1923 the complex designation was replaced by a simple EG 1 and after 1926 they were then allocated the E73 series for the DRG. Both locomotives were always based in Freilassing, in addition to their regular route they were also used for shunting purposes in Salzburg. At the DRG they were obviously very satisfied as well, as the locomotives were only removed from service in 1937 and 1941. One of the two locomotives was converted to a snowplough and it remained in service for many, many years. Model Technically refined and enhanced with new sound Free-standing steps and handrails Extra mounted sandfall pipes Engraved ventilator grill Finely detailed chassis Extra mounted sandbox Spring buffers Multi-part laterns Precise paintwork and painting True to original roof fittings and isolators

Regular price: CHF 324.80

On order, shipped within 10-15 days

H0 Electric Locomotive BR E73 DRG
Brawa 70180 Scale H0
H0 Electric Locomotive BR E73 DRG

Prototype In 1912 the Königlich Bayerische Staats-Eisenbahnen started to electrify the first tracks. Out of the first 17 electric locomotives, there were two which technically speaking distinguished themselves from the conventional ones and then proved to be extremely innovative. Whilst in those days electric locomotives usually had the well known side rod drive from the steam locomotive, these two machines already had a single axle drive, as is standard practice nowadays with all modern electric locomotives. Single axle drive means that every driver axle has its own electric motor. Both locomotives were ordered in 1912 and supplied in 1914 and 1915 by Krauss (technical vehicular components) and Bergmanns Elektrische Werke (electric components). They were stationed in Freilassing and put into service on the hilly route between Freilassing and Berchtesgaden. Both locomotives were originally designated as EG4 X 1/1 in accordance with Bavarian customs. With an overall weight of 56 t they were able to produce a maximum tractive force of 9.300 kg, whilst the maximum speed was set at 50 km/h. They proved to be outstanding, a replica build of this locomotive or development of the drive concept however didn't happen initially, it was only 20 years later that the single axle drive made its breakthrough. The locomotives were obviously ahead of their time. The two Bavarian EG4 X 1/1 still existed after the First World War and had been taken over by the Deutsche Reichsbahn district management of Bavaria. After 1923 the complex designation was replaced by a simple EG 1 and after 1926 they were then allocated the E73 series for the DRG. Both locomotives were always based in Freilassing, in addition to their regular route they were also used for shunting purposes in Salzburg. At the DRG they were obviously very satisfied as well, as the locomotives were only removed from service in 1937 and 1941. One of the two locomotives was converted to a snowplough and it remained in service for many, many years. Model Technically refined and enhanced with new sound Free-standing steps and handrails Extra mounted sandfall pipes Engraved ventilator grill Finely detailed chassis Extra mounted sandbox Spring buffers Multi-part laterns Precise paintwork and painting True to original roof fittings and isolators

Regular price: CHF 207.50

On order, shipped within 10-15 days

H0 Electric Locomotive BR E73 DRG
Brawa 70182 Scale H0
H0 Electric Locomotive BR E73 DRG

Prototype In 1912 the Königlich Bayerische Staats-Eisenbahnen started to electrify the first tracks. Out of the first 17 electric locomotives, there were two which technically speaking distinguished themselves from the conventional ones and then proved to be extremely innovative. Whilst in those days electric locomotives usually had the well known side rod drive from the steam locomotive, these two machines already had a single axle drive, as is standard practice nowadays with all modern electric locomotives. Single axle drive means that every driver axle has its own electric motor. Both locomotives were ordered in 1912 and supplied in 1914 and 1915 by Krauss (technical vehicular components) and Bergmanns Elektrische Werke (electric components). They were stationed in Freilassing and put into service on the hilly route between Freilassing and Berchtesgaden. Both locomotives were originally designated as EG4 X 1/1 in accordance with Bavarian customs. With an overall weight of 56 t they were able to produce a maximum tractive force of 9.300 kg, whilst the maximum speed was set at 50 km/h. They proved to be outstanding, a replica build of this locomotive or development of the drive concept however didn't happen initially, it was only 20 years later that the single axle drive made its breakthrough. The locomotives were obviously ahead of their time. The two Bavarian EG4 X 1/1 still existed after the First World War and had been taken over by the Deutsche Reichsbahn district management of Bavaria. After 1923 the complex designation was replaced by a simple EG 1 and after 1926 they were then allocated the E73 series for the DRG. Both locomotives were always based in Freilassing, in addition to their regular route they were also used for shunting purposes in Salzburg. At the DRG they were obviously very satisfied as well, as the locomotives were only removed from service in 1937 and 1941. One of the two locomotives was converted to a snowplough and it remained in service for many, many years. Model Technically refined and enhanced with new sound Free-standing steps and handrails Extra mounted sandfall pipes Engraved ventilator grill Finely detailed chassis Extra mounted sandbox Spring buffers Multi-part laterns Precise paintwork and painting True to original roof fittings and isolators

Regular price: CHF 324.80

On order, shipped within 10-15 days

H0 Electric Locomotive BR E73 DRG
Brawa 70183 Scale H0
H0 Electric Locomotive BR E73 DRG

Prototype In 1912 the Königlich Bayerische Staats-Eisenbahnen started to electrify the first tracks. Out of the first 17 electric locomotives, there were two which technically speaking distinguished themselves from the conventional ones and then proved to be extremely innovative. Whilst in those days electric locomotives usually had the well known side rod drive from the steam locomotive, these two machines already had a single axle drive, as is standard practice nowadays with all modern electric locomotives. Single axle drive means that every driver axle has its own electric motor. Both locomotives were ordered in 1912 and supplied in 1914 and 1915 by Krauss (technical vehicular components) and Bergmanns Elektrische Werke (electric components). They were stationed in Freilassing and put into service on the hilly route between Freilassing and Berchtesgaden. Both locomotives were originally designated as EG4 X 1/1 in accordance with Bavarian customs. With an overall weight of 56 t they were able to produce a maximum tractive force of 9.300 kg, whilst the maximum speed was set at 50 km/h. They proved to be outstanding, a replica build of this locomotive or development of the drive concept however didn't happen initially, it was only 20 years later that the single axle drive made its breakthrough. The locomotives were obviously ahead of their time. The two Bavarian EG4 X 1/1 still existed after the First World War and had been taken over by the Deutsche Reichsbahn district management of Bavaria. After 1923 the complex designation was replaced by a simple EG 1 and after 1926 they were then allocated the E73 series for the DRG. Both locomotives were always based in Freilassing, in addition to their regular route they were also used for shunting purposes in Salzburg. At the DRG they were obviously very satisfied as well, as the locomotives were only removed from service in 1937 and 1941. One of the two locomotives was converted to a snowplough and it remained in service for many, many years. Model Technically refined and enhanced with new sound Free-standing steps and handrails Extra mounted sandfall pipes Engraved ventilator grill Finely detailed chassis Extra mounted sandbox Spring buffers Multi-part laterns Precise paintwork and painting True to original roof fittings and isolators

Regular price: CHF 324.80

On order, shipped within 10-15 days

10% off the recommended price
Feldbahn starter set with Deutz diesel locomotive
Busch 12019 Scale H0
Feldbahn starter set with Deutz diesel locomotive

Contents: Deutz OMZ 122 F diesel locomotive with two single stanchion wagons, one of which has a brake platform. Oval of track consisting of 8 curved track sections with a radius of 115 mm, 1 straight track section 133.2 mm long and 1 connecting track section 133.2 mm long. Battery box with switch (forward/reverse/stop) for 2 x 1.5 V batteries (LR6/AA, not included).

Selling price: CHF 224.00 RRP CHF 249.40

On order, lead time to be confirmed

10% off the recommended price New
Feldbahn starter set with Ns2 diesel locomotive
Busch 12022 Scale H0
Feldbahn starter set with Ns2 diesel locomotive

Feldbahn diesel locomotive LKM Ns2 in closed version with 2 tipper wagons based on an O&K prototype (built 1936, 1.5 cbm capacity). One wagon features a brake platform. The tips are tiltable. Length of the wagons: 29 and 34 mm. Includes track, battery box (for 2 LR6/AA batteries, not included) and switch (forward/reverse/stop).

Selling price: CHF 223.00 RRP CHF 248.20

On order, lead time to be confirmed

Diesel locomotive Gmeinder 15/18
Busch 12116 Scale H0
Diesel locomotive Gmeinder 15/18

With working headlight! Replica of a Gmeinder 15/18 hp field railway locomotive with open cab. Wheel arrangement B. Length: approx. 35 mm. Diesel locomotive Gmeinder 15/18 The field railway locomotive corresponds to a type built to this design principle from the mid-1920s by the Baden firm Gmeinder. The locomotive was produced in large numbers until the 1950s and, thanks to its robustness, some are still in use today. The prototype of the field railway locomotive is designated "Gmeinder 15/18" according to its hp output (15 hp continuous / 18 hp short-term) and is powered by a diesel engine with three-speed gearbox and chain drive, with a maximum speed of 12 km/h. The gauge is 600 mm. As with the prototype, the locomotive models are available in versions with an open and a closed cab. The small locomotives are driven by a 3 volt micro precision motor with reduction gearing for slow running true to the prototype and strong pulling power. A built-in magnet increases the contact pressure of the locomotive on the metal-backed narrow-gauge tracks, thus ensuring reliable current pick-up from the rails and jerk-free slow running. At the rear of the cab the locomotives have a coupling pin for realistic train formation and a magnetic coupling for operation with tubs and wagons from the Busch mine railway range. As on the original, the field railway locomotive can negotiate the tightest track radii (down to 100 mm). Thanks to its compact construction and small space requirement, it can also be used very well for diorama design and to supplement existing model railway layouts.

Selling price: CHF 109.00 RRP CHF 120.90

On order, lead time to be confirmed

Diesel locomotive "LKM Ns 2f"
Busch 12122 Scale H0
Diesel locomotive "LKM Ns 2f"

Field railway locomotive in closed version. After a prototype originally from the Gernrode lime works. It is still in service today on the Stumpfwaldbahn in Ramsen. Wheel arrangement B. Length: 36 mm. The Ns2f field railway locomotive The Ns2f field railway locomotive from Lokomotivbau Karl Marx was one of the most widely built field railway locomotives in the GDR. With works number 48318, it was first presented at the Leipzig Fair in 1952. It is driven by a 30 hp engine, which transmits its power to the locomotive's two axles via coupling rods. For the first two gears the gearbox received wet multi-plate clutches, and a third gear with a dry multi-plate clutch for speeds up to 14 km/h. The locomotive has an electrical system and is designed for gauges from 485 to 630 mm. From 1952 to 1959, 550 examples of this popular field railway locomotive were built. Thanks to its robustness, it is still in frequent use today on park railways and heritage railways, including in western regions. The model As with the prototype, the locomotive models are available in versions with an open and a closed cab. The small locomotives are driven by a 3 volt micro precision motor with reduction gearing for slow running true to the prototype and strong pulling power. A built-in magnet increases the contact pressure of the locomotive on the metal-backed narrow-gauge tracks, thus ensuring reliable current pick-up from the rails and jerk-free slow running. At the rear of the cab the locomotives have a coupling pin for realistic train formation and a magnetic coupling for operation with tubs and wagons from the Busch mine railway range. As on the original, the field railway locomotive can negotiate the tightest track radii (down to 100 mm). Thanks to its compact construction and small space requirement, it can also be used very well for diorama design and to supplement existing model railway layouts. Lokomotivbau Karl Marx in Babelsberg The VEB Lokomotivbau Karl Marx Babelsberg (LKM) was the most important manufacturer of diesel-powered field railway locomotives in the GDR and emerged from the works of Maschinenbau und Bahnbedarf Aktiengesellschaft, formerly Orenstein & Koppel in Berlin. In 1948 it was incorporated into the VVB LOWA (the abbreviation LOWA designated the Association of People's Own Enterprises of Locomotive and Wagon Construction of the GDR, founded in 1945). The diesel locomotive type programme started in 1950 included numerous narrow-gauge variants. The VEB LKM existed until the end of the GDR in 1990 and was closed in 1992 after conversion into a GmbH and the subsequent "winding-up". Today there is a business park on the former LKM works site in Potsdam.

Selling price: CHF 109.00 RRP CHF 120.90

On order, lead time to be confirmed

Diesel locomotive LKM NS 2f
Busch 12123 Scale H0
Diesel locomotive LKM NS 2f

With working headlight! Field railway locomotive in closed version. Wheel arrangement B. Length: 36 mm. The Ns2f field railway locomotive The Ns2f field railway locomotive from Lokomotivbau Karl Marx was one of the most widely built field railway locomotives in the GDR. With works number 48318, it was first presented at the Leipzig Fair in 1952. It is driven by a 30 hp engine, which transmits its power to the locomotive's two axles via coupling rods. For the first two gears the gearbox received wet multi-plate clutches, and a third gear with a dry multi-plate clutch for speeds up to 14 km/h. The locomotive has an electrical system and is designed for gauges from 485 to 630 mm. From 1952 to 1959, 550 examples of this popular field railway locomotive were built. Thanks to its robustness, it is still in frequent use today on park railways and heritage railways, including in western regions. The model As with the prototype, the locomotive models are available in versions with an open and a closed cab. The small locomotives are driven by a 3 volt micro precision motor with reduction gearing for slow running true to the prototype and strong pulling power. A built-in magnet increases the contact pressure of the locomotive on the metal-backed narrow-gauge tracks, thus ensuring reliable current pick-up from the rails and jerk-free slow running. At the rear of the cab the locomotives have a coupling pin for realistic train formation and a magnetic coupling for operation with tubs and wagons from the Busch mine railway range. As on the original, the field railway locomotive can negotiate the tightest track radii (down to 100 mm). Thanks to its compact construction and small space requirement, it can also be used very well for diorama design and to supplement existing model railway layouts. Lokomotivbau Karl Marx in Babelsberg The VEB Lokomotivbau Karl Marx Babelsberg (LKM) was the most important manufacturer of diesel-powered field railway locomotives in the GDR and emerged from the works of Maschinenbau und Bahnbedarf Aktiengesellschaft, formerly Orenstein & Koppel in Berlin. In 1948 it was incorporated into the VVB LOWA (the abbreviation LOWA designated the Association of People's Own Enterprises of Locomotive and Wagon Construction of the GDR, founded in 1945). The diesel locomotive type programme started in 1950 included numerous narrow-gauge variants. The VEB LKM existed until the end of the GDR in 1990 and was closed in 1992 after conversion into a GmbH and the subsequent "winding-up". Today there is a business park on the former LKM works site in Potsdam.

Selling price: CHF 109.00 RRP CHF 120.90

On order, lead time to be confirmed

Diesel locomotive LKM Ns 2f
Busch 12126 Scale H0
Diesel locomotive LKM Ns 2f

With working headlight! Diesel locomotive in open version. Colour scheme: black with red running gear. Wheel arrangement B. Length: 36 mm. The Ns2f field railway locomotive The Ns2f field railway locomotive from Lokomotivbau Karl Marx was one of the most widely built field railway locomotives in the GDR. With works number 48318, it was first presented at the Leipzig Fair in 1952. It is driven by a 30 hp engine, which transmits its power to the locomotive's two axles via coupling rods. For the first two gears the gearbox received wet multi-plate clutches, and a third gear with a dry multi-plate clutch for speeds up to 14 km/h. The locomotive has an electrical system and is designed for gauges from 485 to 630 mm. From 1952 to 1959, 550 examples of this popular field railway locomotive were built. Thanks to its robustness, it is still in frequent use today on park railways and heritage railways, including in western regions. The model As with the prototype, the locomotive models are available in versions with an open and a closed cab. The small locomotives are driven by a 3 volt micro precision motor with reduction gearing for slow running true to the prototype and strong pulling power. A built-in magnet increases the contact pressure of the locomotive on the metal-backed narrow-gauge tracks, thus ensuring reliable current pick-up from the rails and jerk-free slow running. At the rear of the cab the locomotives have a coupling pin for realistic train formation and a magnetic coupling for operation with tubs and wagons from the Busch mine railway range. As on the original, the field railway locomotive can negotiate the tightest track radii (down to 100 mm). Thanks to its compact construction and small space requirement, it can also be used very well for diorama design and to supplement existing model railway layouts. Lokomotivbau Karl Marx in Babelsberg The VEB Lokomotivbau Karl Marx Babelsberg (LKM) was the most important manufacturer of diesel-powered field railway locomotives in the GDR and emerged from the works of Maschinenbau und Bahnbedarf Aktiengesellschaft, formerly Orenstein & Koppel in Berlin. In 1948 it was incorporated into the VVB LOWA (the abbreviation LOWA designated the Association of People's Own Enterprises of Locomotive and Wagon Construction of the GDR, founded in 1945). The diesel locomotive type programme started in 1950 included numerous narrow-gauge variants. The VEB LKM existed until the end of the GDR in 1990 and was closed in 1992 after conversion into a GmbH and the subsequent "winding-up". Today there is a business park on the former LKM works site in Potsdam.

Selling price: CHF 109.00 RRP CHF 120.90

On order, lead time to be confirmed

10% off the recommended price
Diesel locomotive Deutz OMZ 122 F
Busch 12136 Scale H0
Diesel locomotive Deutz OMZ 122 F

With working headlight. Closed version. Wheel arrangement B. Length: 43 mm. The Deutz OMZ 122 F field railway locomotive With the Deutz OMZ 122 field railway locomotive, Busch has realised a popular traction vehicle. The locomotive was built between 1932 and 1942 by Humboldt-Deutz in Cologne and used primarily for shunting. The design is limited to the essentials: the locomotives are fitted only with a simple manual gearbox and do not even have a compressed-air brake. One wheelset is driven directly, the second is carried along by a coupling rod. The version with 600 mm gauge has an output of 40 hp and a top speed of 17.5 km/h. The engine is started with compressed air. On the model, details such as connecting rods, exhaust, type plate, etc. are reproduced delicately. Incidentally, Deutz did not have independent type designations for its locomotives but used the engine designation for the locomotives as well. So that the locomotives can be distinguished by name, it has become customary to append an "F" for field railway locomotive, an "R" for shunting locomotive and an "F" for mine locomotive to the engine designation.

Selling price: CHF 115.00 RRP CHF 128.10

On order, lead time to be confirmed

10% off the recommended price
Mine locomotive B 360
Busch 12150 Scale H0
Mine locomotive B 360

With working headlight. Wheel arrangement B. Length: 33 mm. The original of this locomotive can still be seen in operation today on the historic Schönborn-Dreiwerden ore railway, among others ("Alte Hoffnung Erbstolln" visitor mine near Schönborn/Saxony). The small battery locomotive was built in the mining equipment company in Aue in the GDR and was widely used in mines in various regions. The H0i/H0f model, true to the prototype, with micro motor (3 V=) has excellent slow-running characteristics. With yellow-glowing front lamp (LED), magnetic couplings for forming trains with the tubs and a bar coupling for connection to the personnel wagons. Technical data: Height: 19.8 mm (from top of rail) Width: 11.3 mm Length: 34.9 mm Axle spacing: 13.6 mm Power supply: DC, max. 3 V, approx. 70 mA

Selling price: CHF 103.00 RRP CHF 114.90

On order, lead time to be confirmed

10% off the recommended price
Diesel locomotive Gmeinder 15/18
Busch 12182 Scale H0
Diesel locomotive Gmeinder 15/18

Closed version.

Selling price: CHF 105.00 RRP CHF 117.20

On order, lead time to be confirmed

10% off the recommended price
Diesel locomotive Gmeinder 15/18
Busch 12183 Scale H0
Diesel locomotive Gmeinder 15/18

Open version.

Selling price: CHF 105.00 RRP CHF 117.20

On order, lead time to be confirmed

11% off the recommended price
Static model Gmeinder 15/18 diesel locomotive
Busch 12400 Scale H0
Static model Gmeinder 15/18 diesel locomotive

Kit without drive. Available as an open and closed (with roof) version.

Selling price: CHF 13.90 RRP CHF 15.70

On order, lead time to be confirmed

11% off the recommended price
Static model diesel locomotive LKM Ns 2f
Busch 12401 Scale H0
Static model diesel locomotive LKM Ns 2f

Kit without drive. Available as an open and closed (with roof) version.

Selling price: CHF 13.90 RRP CHF 15.70

On order, lead time to be confirmed