Locomotives
Prototype Express steam locomotive 18 314 with main coal firing and a coal tender 2´2´T34 of the Deutsche Reichsbahn of the GDR (DR/DDR). Rebuild version as a test locomotive of the VES-M Halle (Saale). Version with a Reko boiler and partial cladding, based on the steam locomotive 18 314 (former Baden IV h). With Witte smoke deflectors and an Indusi magnet on one side. The locomotive looks as it did around 1962/1963. Model Largely made of metal. The chassis, the locomotive body with the boiler, and the cab are made of die-cast zinc. The other add-on parts are also mostly made of metal (brass). Elaborate model with many separately applied details and a highly detailed cab. The smoke box door can be opened. Movable cab doors, and much more. It has an mfx digital decoder with 32 functions, a regulated high-performance motor, and a sound generator with wheel-synchronised running sound as well as extensive sound functions. Operation with AC power, DC power, Märklin Digital, and DCC is possible. Built-in buffer capacitor. All driving axles powered. Built-in smoke generator with wheel-synchronised steam exhaust, multi-stage cylinder steam, and a steam whistle. Running gear lighting, triple headlights with era-appropriate light colour, changing over with the direction of travel. The headlights will work in conventional operation and can be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. Red tail signal can be turned on and off, and cab lighting. Digitally controlled special function: the locomotive driver operates the regulator (a servo-actuated sequence of movements just as the driver operates the regulator on the prototype). Equipped with sprung buffers, the locomotive model has a screw coupler at the front and a remote-controlled Telex coupler at the rear (the rear one can be exchanged for a screw coupler). Valve gear changeover (forward, reverse, continuous operation) in 3 steps. Built-in locomotive driver and fireman figures. An accessory pack with a screw coupler, steam oil, and gloves is included with the model. Mounted on a black painted aluminium base for display in a cabinet. The minimum radius for operation is 1,020 mm. Length over the buffers approx. 73.8 cm. Weight approx. 9.2 kg. Highlights Completely new development Highly detailed all-metal construction Running gear, superstructure, boiler, etc. made of die-cast zinc, add-on parts made of brass Newly developed decoder generation with a power buffer and up to 32 functions Smoke generator with wheel-synchronised steam exhaust, cylinder steam front/rear, and a steam whistle Special function: the locomotive driver operates the regulator (servo-actuated) Load-controlled wheel-synchronised running sound Smoke box door and dome cover can be opened, with many original details Headlights with era-appropriate light colour and warm white LEDs Red tail light can be turned on and off Cab lighting. mfx decoder for operation with AC power, DC power, Märklin Digital, and DCC. Valve gear changeover (forward, reverse, continuous operation) in 3 steps with a servomotor Telex coupler at the rear, screw coupler at the front (1 additional one for exchanging at the rear is included)
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Diesel railcar Cvt-34 "Wismarer Schienenbus" (type "Hannover A"), no. 73 of the Saar-Bahnen (SAAR). Colour wine red/ivory, Era II (1934/1935 condition). Model Completely new tooling, chassis with the main frame and the body made of metal. Many separately applied brass parts and applied metal parts such as handrails, metal signs, windscreen wipers, etc. It has a DCC digital decoder and extensive sound functions such as speed-dependent running sound, a Typhon horn, a conductor's whistle, the history of the prototype vehicle, and much more. Operation with AC power, DC power, Märklin Digital, and MFX is possible. One high-efficiency motor per vehicle half with power to both axles. Built-in parameterisable buffer capacitor. Warm white/red LED headlights changing over with the direction of travel, will work in conventional operation, can be controlled digitally. Instrument lighting can be turned on and off. Multiple stop announcements depending on the version with a prototypical line. The doors can be opened by motor. Interior lighting can be turned on and off. Highly detailed prototypical interior details, cab 1 with a built-in locomotive driver figure. The minimum radius for operation is 1,020 mm. Length over the buffers 36.5 cm. Weight approx. 2.4 kg. Highlights Completely new development made of metal with separately applied brass parts Highly detailed professional model Drive with 2 motors on both axles Doors can be opened by servomotor Full sound equipment Instrument lighting can be turned on and off Interior lighting Built-in buffer capacitor
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Diesel railcar Cvt-34 "Wismarer Schienenbus" (type "Hannover A") T6, the so-called "Igel", of the Wittlager Kreisbahn (WKB). Colour purple red/pure white, Era III (condition in the mid-1950s). Model Completely new tooling, chassis with the main frame and the body made of metal. Many separately applied brass parts and applied metal parts such as handrails, metal signs, windscreen wipers, etc. It has a DCC digital decoder and extensive sound functions such as speed-dependent running sound, a Typhon horn, a conductor's whistle, the history of the prototype vehicle, and much more. Operation with AC power, DC power, Märklin Digital, and MFX is possible. One high-efficiency motor per vehicle half with power to both axles. Built-in parameterisable buffer capacitor. Warm white/red LED headlights changing over with the direction of travel, will work in conventional operation, can be controlled digitally. Instrument lighting can be turned on and off. The doors can be opened by motor. Multiple stop announcements depending on the version with a prototypical line. Interior lighting can be turned on and off. Highly detailed prototypical interior details, cab 1 with a built-in locomotive driver figure. The minimum radius for operation is 1,020 mm. Length over the buffers 36.5 cm. Weight approx. 2.4 kg. Highlights Completely new development made of metal with separately applied brass parts Highly detailed professional model Drive with 2 motors on both axles Doors can be opened by servomotor Full sound equipment Instrument lighting can be turned on and off Interior lighting Built-in buffer capacitor
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Diesel railcar Cvt-34 "Wismarer Schienenbus" (type "Hannover A") T5, the so-called "Igel", of the Wittlager Kreisbahn (WKB). Ruby red/pure white, Era III/IV (condition at the end of the 1960s). Model Completely new tooling, chassis with the main frame and the body made of metal. Many separately applied brass parts and applied metal parts such as handrails, metal signs, windscreen wipers, etc. It has a DCC digital decoder and extensive sound functions such as speed-dependent running sound, a Typhon horn, a conductor's whistle, the history of the prototype vehicle, and much more. Operation with AC power, DC power, Märklin Digital, and MFX is possible. One high-efficiency motor per vehicle half with power to both axles. Built-in parameterisable buffer capacitor. Warm white/red LED headlights changing over with the direction of travel, will work in conventional operation, can be controlled digitally. Instrument lighting can be turned on and off. The doors can be opened by motor. Multiple stop announcements depending on the version with a prototypical line. Interior lighting can be turned on and off. Highly detailed prototypical interior details, cab 1 with a built-in locomotive driver figure. The minimum radius for operation is 1,020 mm. Length over the buffers 36.5 cm. Weight approx. 2.4 kg. A kit for a "railcar shelter", which is a prototypical reproduction of the former milk loading facility at Bohmte, is included. The kit is laser-cut from architectural card. Building dimensions (LxWxH) 355x120x193mm Highlights Completely new development made of metal with separately applied brass parts Highly detailed professional model Drive with 2 motors on both axles Doors can be opened by servomotor Full sound equipment Instrument lighting can be turned on and off Interior lighting Built-in buffer capacitor Architectural kit of the Bohmte milk loading facility included
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Diesel railcar Cvt-34 "Wismarer Schienenbus" (type "Hannover A") of the Chemin de Fer à Vapeur des Trois Vallées (CFV3V), Mariembourg, Belgium. Colour purple red/pure white, Era V/VI (condition from 1978 to 2014). Model Completely new tooling, chassis with the main frame and the body made of metal. Many separately applied brass parts and applied metal parts such as handrails, metal signs, windscreen wipers, etc. It has a DCC digital decoder and extensive sound functions such as speed-dependent running sound, a Typhon horn, a conductor's whistle, the history of the prototype vehicle, and much more. Operation with AC power, DC power, Märklin Digital, and MFX is possible. One high-efficiency motor per vehicle half with power to both axles. Built-in parameterisable buffer capacitor. Warm white/red LED headlights changing over with the direction of travel, will work in conventional operation, can be controlled digitally. Multiple stop announcements depending on the version with a prototypical line. Instrument lighting can be turned on and off. The doors can be opened by motor. Interior lighting as well as cab lighting can be turned on and off. Highly detailed prototypical interior details, cab 1 with a built-in locomotive driver figure. The minimum radius for operation is 1,020 mm. Length over the buffers 36.5 cm. Weight approx. 2.4 kg. Highlights Completely new development made of metal with separately applied brass parts Highly detailed professional model Drive with 2 motors on both axles Doors can be opened by servomotor Full sound equipment Instrument lighting can be turned on and off Interior lighting Cab lighting Built-in buffer capacitor
- Digital
- Sound
On order, shipped within 10-15 days
Prototype: S 2/6 steam express locomotive. Designed by the K.Bay.St.B. as a locomotive for high-speed trials. Locomotive number 3201. Reproduction of the condition around 2017. The engine is preserved and is on display in the Transportation Museum in Nuremberg. Highlights Completely new tooling. Highly detailed all-metal construction with a clear protective coat. Running gear, body, boiler etc. made of die-cast zinc, applied parts made of brass. New decoder generation with a power buffer and up to 32 functions. Smoke generator with steam chuffs synchronized with the wheels, cylinder steam front/rear and steam whistle. Load-controlled operating sound synchronized with the wheels. Smokebox door and dome cover can be opened, with many prototype details. Headlights with era-appropriate light color and warm white LEDs. Red marker light can be controlled. Two-color firebox flickering combined with a firebox door that opens automatically in sequence with a motorized fireman figure that turns and imitates shoveling coal. Imitation tender coal load that can be lowered by a motor. Cab lighting. mfx decoder for operation with AC, DC, Märklin Digital and DCC. Valve gear reversing (forward, reverse, continuous operation) in 3 stages with a servo motor. Telex coupler at the rear, prototype screw coupler at the front (1 additional one included for replacing the rear coupler). Product description Model: Completely new tooling made of metal, with a clear protective coat. Frame, locomotive body with boiler and cab made of die-cast zinc. Other applied parts made largely of metal (brass). Elaborate model with many applied elements and an extremely detailed cab. Smokebox door can be opened. Cab doors can be moved, and much more. With an mfx digital decoder with 32 functions, controlled high-performance motor and sound generator with operating sound synchronized with the wheels as well as extensive sound functions. Can be run with AC, DC, Märklin Digital and DCC. Built-in buffer capacitor. All driving axles powered. Built-in smoke generator with steam chuffs synchronized with the wheels, multi-stage cylinder steam and steam whistle. Running gear lights, triple headlights with era-appropriate light color that change over with the direction of travel. Headlights in operation in conventional mode, can be controlled digitally. Maintenance-free warm white LEDs for the lighting. Red marker light can be turned on/off and cab lighting. Digitally controlled multi-color firebox lighting (flickering) with a motorized firebox door and a turning fireman figure for a prototypical reproduction of firing the firebox. Imitation tender coal load that can be lowered by a motor and controlled. Equipped with sprung buffers, locomotive model with a prototype screw coupler at the front and a remote controlled Telex coupler at the rear (can be replaced at the rear by a screw coupler). Valve gear reversing (forward, reverse, continuous operation) in 3 stages. Built-in engineer figure. The model comes with an accessory package with a prototype screw coupler, steam oil and gloves. Mounted on a black painted aluminum base for display in a showcase. Minimum radius for operation 1.020 mm. Length over buffers approx. 66,2 cm. Weight approx. 6,8 kg.
On order, lead time to be confirmed
Prototype Express steam locomotive class 15 of the Deutsche Reichsbahn in a basic black colour with red running gear. Designed by the K.Bay. St.B. as a locomotive for high-speed trials. Locomotive number 15 001. The locomotive looks as it did around 1928. Model Completely new tooling made of metal. The chassis, the locomotive body with the boiler, and the cab are made of die-cast zinc. The other add-on parts are largely made of metal (brass). Elaborate model with many separately applied elements and a highly detailed cab. The smoke box door can be opened. Movable cab doors, and much more. It has an mfx digital decoder with 32 functions, a regulated high-performance motor, and a sound generator with wheel-synchronised running sound as well as extensive sound functions. Operation with AC power, DC power, Märklin Digital, and DCC is possible. Built-in buffer capacitor. All driving axles powered. Built-in smoke generator with wheel-synchronised steam exhaust, multi-stage cylinder steam, and a steam whistle. Running gear lighting, triple headlights with era-appropriate light colour, changing over with the direction of travel. The headlights will work in conventional operation and can be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. Red tail signal can be turned on and off, and cab lighting. Digitally controlled, multi-colour firebox lighting (flickering) with a motor-driven firebox door and a rotating fireman figure for a prototypical reproduction of the firing of the firebox. The imitation tender coal load can be lowered by motor and is controllable. Equipped with sprung buffers, the locomotive model has a screw coupler at the front and a remote-controlled Telex coupler at the rear (the rear one can be exchanged for a screw coupler). Valve gear changeover (forward, reverse, continuous operation) in 3 steps. Built-in locomotive driver figure. An accessory pack with a screw coupler, steam oil, and gloves is included with the model. Mounted on a black painted aluminium base for display in a cabinet. The minimum radius for operation is 1,020 mm. Length over the buffers approx. 66.2 cm. Weight approx. 6.8 kg. Highlights Completely new development Highly detailed all-metal construction Running gear, superstructure, boiler, etc. made of die-cast zinc, add-on parts made of brass Newly developed decoder generation with a power buffer and up to 32 functions Smoke generator with wheel-synchronised steam exhaust, cylinder steam front/rear, and a steam whistle Load-controlled wheel-synchronised running sound Smoke box door and dome cover can be opened, with many original details Headlights with era-appropriate light colour and warm white LEDs Red tail light can be turned on and off Two-colour firebox flickering in conjunction with an automatically opening firebox door, in sequence with a motor-driven rotating fireman figure imitating the shovelling of coal Imitation of the tender coal reproduction can be lowered by motor Cab lighting. mfx decoder for operation with AC power, DC power, Märklin Digital, and DCC. Valve gear changeover (forward, reverse, continuous operation) in 3 steps with a servomotor Telex coupler at the rear, screw coupler at the front (1 additional one for exchanging at the rear is included)
- Digital
- Sound
On order, shipped within 10-15 days
Prototype: Austrian Federal Railways (ÖBB) class 1018.101 in fir green/reseda green paint scheme for Era IIIa. Express locomotive with HISE 2 pantographs and flat lamps at the bottom (old design). Running number 1018.101, BBD Linz, Zgf Salzburg. Highlights Completely new tooling made of metal. Highly detailed professional model. Motorized scissors pantographs that can be raised and lowered in digital operation. Digitally remote controlled Telex coupler at the front and rear. Prototype screw couplers included. Doors can be opened. Product description Model: Completely new tooling, frame with main frame and locomotive body made of metal. Many applied metal parts. With an mfx digital decoder, controlled high-performance motor and extensive sound functions such as operating sounds, locomotive whistle and much more. Can be run with AC, DC, Märklin Digital and DCC. Centrally mounted high-performance motor with drive on all axles. Motorized HISE 2 scissors pantographs that can be raised and lowered in digital operation. White LED headlights that change over with the direction of travel, in operation in conventional mode, can be controlled digitally. White LED lighting in the cabs, depending on the direction of travel. Engine room lighting. Cab doors can be opened, interior details, cab with an engineer figure. Metal grab irons and many other applied details: signs, windshield wipers, whistle and others. Buffer beams with sprung buffers and applied brake hoses. Factory-installed claw couplers can be replaced by the 2 prototype screw couplers included. Built-in remote controlled Telex coupler at the front and rear. Minimum radius for operation 1.020 mm. Length over buffers 52,9 cm. Weight 6,2 kg.
On order, shipped within 10-15 days
Prototype Heavy goods train locomotive class 151 of the German Federal Railway (DB). Chrome oxide green paint scheme. Running number 151 034-6. The locomotive looks as it did in Era IV around 1975/1976. Model Completely new tooling, chassis with the main frame and the locomotive body made of die-cast zinc. Many separately applied centrifugally cast brass parts. It has an mfx digital decoder with up to 32 functions, a built-in parameterisable buffer capacitor, a regulated high-performance motor, and extensive sound functions such as running sound, blowers, a locomotive whistle, additional announcements, and warning messages. Operation with AC power, DC power, Märklin Digital, and DCC is possible. High-efficiency motors with power to all axles. Parameterisable power buffer. The roof pantographs can be raised and lowered by motor in digital operation. White/red LED headlights changing over with the direction of travel, will work in conventional operation, can be controlled digitally. Engine room lighting can be turned on and off, LED lighting in the cabs as well as the starting lamp depending on the direction of travel. The cab doors can be opened, interior details, cab with a locomotive driver figure. Driver's desk lighting. Metal handrails and many other separately applied details such as signs, windscreen wipers, a whistle, and much more. Buffer beams with sprung buffers and separately applied brake lines. A remote-controlled Telex coupler mounted as standard at the rear, a screw coupler at the front. Each can be exchanged for the other type of coupler (included). The minimum radius for operation is 1,020 mm. Length over the buffers 60.9 cm. Weight approx. 6.9 kg. Highlights Completely new, highly detailed development made of die-cast zinc with separately applied centrifugally cast brass parts Highly detailed professional model The roof pantographs can be raised and lowered by motor in digital operation Telex couplers at the front and rear can be controlled digitally Extremely extensive sound equipment Driver's desk lighting Power buffer Screw couplers for the front and rear included
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Heavy goods train locomotive class 162 of Hectorrail, running number 162.007 (151 134-4). Operating condition of Era VI around 2019. Model Completely new tooling, chassis with main frame and locomotive body of die-cast zinc. Many separately applied centrifugally cast brass parts. The locomotive has an mfx digital decoder with up to 32 functions, a built-in buffer capacitor that can be parameterised, a regulated high-performance motor and extensive sound functions such as operating sounds, blowers, a locomotive whistle, further announcements and warning messages. It can be operated with AC power, DC power, Märklin Digital and DCC. High-efficiency motors with all axles powered. The power buffer can be parameterised. The roof pantographs can be raised and lowered by motor in digital operation. White/red LED headlights change over with the direction of travel, will work in conventional operation and can be controlled digitally. The engine room lighting can be controlled; the LED lighting in the cabs as well as the starting lamp are dependent on the direction of travel. Cab doors that open, interior details, cab with a locomotive driver figure. Driver's desk lighting. Metal handrails and many other separately applied details such as: plates, windscreen wipers, a whistle and much more. Buffer beams with sprung buffers and separately applied brake lines. A remote-controlled Telex coupler fitted as standard at the rear, a screw coupler at the front. Each can be exchanged for the other coupler type (included in the contents supplied). The minimum radius for operation is 1,020 mm. Length over the buffers 60.9 cm. Weight approximately 6.9 kg. Highlights Completely new, highly detailed development in die-cast zinc with separately applied centrifugally cast brass parts Highly detailed professional model Roof pantographs that can be raised and lowered by motor in digital operation Telex coupler at the front and rear that can be controlled digitally Extremely extensive sound equipment Driver's desk lighting Power buffer Screw couplers for the front and rear included in the contents supplied
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Electric express railcar class RCe 2/4 "Roter Pfeil", 3rd class, maintained as a heritage vehicle for special trips by the Oensingen-Balsthal-Bahn AG (OeBB). Refurbished, the railcar externally reproduces its condition in the mid-1950s in the purple red basic paint scheme of the SBB. Railcar running number 607. Operating condition 2023. Model Chassis with main frame and locomotive body of die-cast zinc. Many separately applied centrifugally cast brass parts. Metal buffers. The railcar has an mfx digital decoder with up to 32 functions, a built-in power buffer that can be parameterised, a regulated high-performance motor and extensive sound functions such as operating sounds, blowers, a locomotive whistle, multiple station stop announcements, station announcements, background sounds at the station and much more. It can be operated with AC power, DC power, Märklin Digital and DCC. High-efficiency motor with two axles powered. The scissors-type pantographs can be raised and lowered by motor in digital operation. White LED headlights change over with the direction of travel, will work in conventional operation and can be controlled digitally. Warm white LED lighting in the cabs, dependent on the direction of travel. The interior lighting and the driver's desk lighting can be controlled. Swiss lighting changeover in red and white, doors that open, interior details, cab with a built-in locomotive driver figure. The minimum radius for operation is 1,020 mm. Length over the buffers 70 cm. Weight approximately 5.6 kg. Highlights Completely new tooling in metal Reproduction of the operational heritage vehicle of the Oe BB. Built-in power buffer Many light and sound functions Pantograph operated by motor Detailed reproduction of the interior One-time series One-time series.
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Steam locomotive with a tub-style tender, class 38.10-40, of the German Federal Railway (DB) with Witte smoke deflectors and 2 boiler fittings. Former Prussian P8. Model The chassis, locomotive body, tender and applied parts are largely of metal. Highly detailed model with many separately applied details and a detailed cab. The locomotive has an mfx digital decoder, a regulated high-performance motor and a sound generator with wheel-synchronised operating sounds as well as extensive sound functions. It can be operated with AC power, DC power, Märklin Digital and DCC. 3 axles powered. Built-in smoke generator with wheel-synchronised steam output and cylinder steam. Triple headlights on the locomotive and tender with era-appropriate light colouring, changing over with the direction of travel. The headlights and the smoke unit will work in conventional operation and can be controlled digitally. Lighting with maintenance-free warm white LEDs. With cab lighting and firebox lighting. The locomotive has a screw coupler at the front and a screw coupler on the tender. The contents supplied with the locomotive include an equipment pack with a screw coupler and a claw coupler as well as a locomotive driver figure and a fireman figure and steam oil. The minimum radius for operation is 1,020 mm. Length over the buffers 64.5 cm. Highlights Completely new development of the tub-style tender Highly detailed metal construction Smoke generator with wheel-synchronised steam output, cylinder steam and a steam whistle Load-controlled wheel-synchronised operating sounds Smoke box door that opens, with many original details Firebox flickering in two colours Movable water tank lid, can be opened prototypically from the cab Randomly controlled steam output from the pressure relief valve Headlights with era-appropriate light colouring and warm white LEDs. Running gear and cab lighting. mfx decoder for operation with AC power, DC power, Märklin Digital and DCC. A good 7.5 kilos in weight (locomotive 4.6 kilos), length of the tub-style tender 28.9 cm
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Steam locomotive with a tub-style tender, class 038.10-40, of the German Federal Railway (DB) with Witte smoke deflectors and 3 boiler fittings (feed dome, sand box, steam dome). Former Prussian P8. Model The chassis, locomotive body, tender and applied parts are largely of metal. Highly detailed model with many separately applied details and a detailed cab. The locomotive has an mfx digital decoder, a regulated high-performance motor and a sound generator with wheel-synchronised operating sounds as well as extensive sound functions. It can be operated with AC power, DC power, Märklin Digital and DCC. 3 axles powered. Built-in smoke generator with wheel-synchronised steam output and cylinder steam. Triple headlights on the locomotive and tender with era-appropriate light colouring, changing over with the direction of travel. The headlights and the smoke unit will work in conventional operation and can be controlled digitally. Lighting with maintenance-free warm white LEDs. With cab lighting and firebox lighting, running gear lighting. The locomotive has a screw coupler at the front and a screw coupler on the tender. The contents supplied with the locomotive include an equipment pack with a screw coupler and a claw coupler as well as a locomotive driver figure and a fireman figure. The minimum radius for operation is 1,020 mm. Length over the buffers 64.5 cm. Highlights Completely new development of the tub-style tender Highly detailed metal construction Smoke generator with wheel-synchronised steam output, cylinder steam and a steam whistle Load-controlled wheel-synchronised operating sounds Smoke box door that opens, with many original details Firebox flickering in two colours. Movable water tank lid, can be opened prototypically from the cab Randomly controlled steam output from the pressure relief valve Headlights with era-appropriate light colouring and warm white LEDs. Running gear and cab lighting. mfx decoder for operation with AC power, DC power, Märklin Digital and DCC. A good 7.5 kilos in weight (locomotive 4.6 kilos), length of the tub-style tender 28.9 cm
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Henschel works locomotive no. 2, type DH 500. Condition around 1962, Era III. Model A completely newly designed model of the DH 500. The locomotive body, chassis with main frame, wheels, and coupling rods are made of die-cast zinc, with separately applied parts mostly made of metal. It features an mfx digital decoder with a built-in, configurable power buffer. All axles are powered. It offers extensive sound and light functions. It can be operated with AC, DC, Märklin Digital, and DCC. The locomotive has a high-performance motor. All axles are powered. It has white triple headlights with LEDs, alternating with a red tail lamp, which can be controlled digitally. Warm white switchable LED cab lighting is included. The cab doors can be opened, and the cab interior details are a prototypical reproduction. The cab includes a built-in engineer figure. Metal grab rails and many other separately applied details are present, such as windscreen wipers, a bell, and others. Buffer beams with sprung buffers and separately applied brake lines are fitted. A remotely operable Telex coupling is fitted as standard at the front and rear. The Telex coupling can be replaced with screw couplings (not included). The minimum radius for operation is 1,020 mm. The length over the buffers is 27.8 cm. The weight is approximately 3.5 kg. Highlights mfx digital decoder Parametrizable power buffer Cab lighting Doors that open Various sound functions Metal body
- Digital
- Sound
Pre-order, release expected in December 2026
Prototype DH 500 Ca diesel locomotive of RAG Ruhrkohle AG, colliery railway and port operations Central Ruhr. Locomotive number V 565. The locomotive looks as it did in Era IV around 1980. Model Completely new tooling of the DH 500 Ca. Locomotive body, chassis with main frame, wheels and side rod made of die-cast zinc, applied parts mostly metal. With an mfx digital decoder and a built-in power buffer that can be parameterized. All axles powered. Extensive sound and light functions. Operation possible with AC, DC, Märklin Digital and DCC. Built-in high-performance motor. All axles powered. White triple headlights with LEDs changing over to a red marker light, can be controlled digitally. Warm white LED cab lighting that can be turned on and off. Cab doors can be opened, prototypical rendering of the cab interior, cab with a built-in engineer figure. Metal grab irons and many other applied details such as windshield wipers, bell, etc. Buffer beams with sprung buffers and applied brake lines. Factory-installed remote controlled Telex couplers on the front and rear. Telex couplers can be replaced with prototype screw couplers (not included). Minimum radius for operation 1,020 mm. Length over the buffers 27.8 cm. Weight approx. 3.5 kg Highlights mfx decoder Power buffer can be parameterized Cab lighting Doors can be opened Various sound functions Metal body
- Digital
- Sound
Pre-order, release expected in December 2026
Prototype Diesel locomotive OHE number DH 63, leased to DB Braunschweig. (Type DH 500 approx.) Condition Era IV around 1972. Model A completely newly designed model of the DH 500. The locomotive body, chassis with main frame, wheels, and coupling rods are made of die-cast zinc, with separately applied parts mostly in metal. It features an mfx digital decoder with a built-in, configurable power buffer. All axles are powered. It offers extensive sound and light functions. It can be operated with AC, DC, Märklin Digital, and DCC. A high-performance motor is built in. All axles are powered. It has white triple headlights with LEDs, alternating with a red tail lamp, which can be controlled digitally. Warm white switchable LED cab lighting is included. The cab doors can be opened, and the cab interior is a prototypical reproduction, complete with a built-in engineer figure. Metal grab rails and many other separately applied details are present, such as windscreen wipers and a bell. Buffer beams feature sprung buffers and separately applied brake hoses. A remote-controlled Telex coupling is fitted as standard at both the front and rear. The Telex coupling can be replaced with screw couplings (not included). The minimum radius for operation is 1,020 mm. The length over the buffers is 27.8 cm. The weight is approximately 3.5 kg. Highlights mfx digital decoder Configurable power buffer Cab lighting Doors that open Various sound functions Metal body
- Digital
- Sound
Pre-order, release expected in December 2026
Prototype PTT Works locomotive (Post, Telephone and Telegraph Services, Post Station Zurich-Sihlpost, Switzerland) Type DH 500. Approximate condition of Era III. Model A completely newly designed model of the DH 500. The locomotive body, chassis with main frame, wheels, and coupling rods are made of die-cast zinc, with separately applied parts mostly made of metal. It features an mfx digital decoder with a built-in, configurable power buffer. All axles are powered. It offers extensive sound and light functions. It can be operated with AC, DC, Märklin Digital, and DCC. The locomotive has a high-performance motor. All axles are powered. It has white triple headlights with LEDs, alternating with a red tail lamp, which can be controlled digitally. The cab has warm white, switchable LED lighting. The cab doors can be opened, and the cab interior is a prototypical reproduction, complete with a built-in engineer figure. It features metal grab rails and many other separately applied details such as windscreen wipers, a bell, and more. The buffer beams have sprung buffers and separately applied brake lines. It comes with a remotely operable Telex coupling fitted at both the front and rear as standard. The Telex couplings can be replaced with screw couplings (not included). The minimum radius for operation is 1,020 mm. The length over the buffers is 27.8 cm. The weight is approximately 3.5 kg. Highlights mfx digital decoder Parametrically configurable power buffer Cab lighting Doors that open Various sound functions Metal body
- Digital
- Sound
Pre-order, release expected in December 2026
Prototype Local freight electric locomotive EG 507 in the photographic livery. Locomotive of the later Royal Prussian Railway Administration (KPEV), Era I. Model A completely newly designed model. The chassis features a main frame made of die-cast zinc, with a locomotive body constructed from sheet brass. Details are made from centrifugally cast brass. Equipped with an mfx digital decoder and 31 functions, with a configurable power buffer. Drive is provided to all axles. Extensive sound and light functions. Can be operated on AC, DC, Märklin Digital, and DCC systems. Features a centrally mounted high-performance motor driving all axles. The prototypical scissors-type pantograph can be raised and lowered by motor in digital operation. White dual headlights with LEDs, alternating with a red tail lamp, digitally switchable. Passing light is switchable. Warm white LED cab lighting. The driver's desk is illuminated. Tap changer flashes. Driver's cab doors open. The cab interior is a detailed replica, with a driver figure fitted inside. Metal grab rails and many other separately applied details, such as plates, whistle, etc. Buffer beams with sprung buffers and separately applied brake lines. A Telex coupler is fitted at the rear as standard and is remote-controlled; it can be replaced with the included screw couplers. A prototypical screw coupler is fitted at the front. A Telex coupler for the front is included. The minimum radius for operation is 1,020 mm. Length over the buffers 31.3 cm. Weight approx. 3 kg. Highlights mfx digital decoder with 31 functions Power buffer Can be raised and lowered under digital operation Scissors-type pantograph Cab lighting Illuminated fittings Doors that open Tap changer flashes
- Digital
On order, shipped within 10-15 days
Prototype Regional freight electric locomotive EG 507 of the Royal Prussian Railway Administration (KPEV) Era I. Model A completely newly designed model. The chassis features a main frame made of die-cast zinc, with a locomotive body constructed from sheet brass. Details are made from centrifugally cast brass. Equipped with an mfx digital decoder and 31 functions, with a configurable power buffer. Drive is provided to all axles. Extensive sound and light functions. Can be operated with AC, DC, Märklin Digital, and DCC. A centrally mounted high-performance motor drives all axles. In digital operation, the prototypical scissors-type pantograph can be raised and lowered. White dual headlights with LEDs alternate with the red tail lamp, digitally switchable. Passing light is switchable. Warm white LED lighting in the cab. The driver's desks are illuminated. The engineer's cab doors open, and the cab interior is finely detailed, complete with a fitted engineer figure. Metal grab rails and many other separately applied details are present, such as plates, windscreen wipers, a whistle, and more. Buffer beams feature sprung buffers and fitted brake lines. A Telex coupling is fitted at the rear and is remotely operable; it can be replaced with the included prototype screw couplings. A prototypical screw coupling is fitted at the front. A Telex coupling for the front is included in the delivery. The minimum radius for operation is 1,020 mm. Length over the buffers is 31.3 cm. Weight approx. 3 kg. Highlights mfx digital decoder with 31 functions Power buffer Can be raised and lowered under digital operation Scissors-type pantograph Cab lighting Illuminated fittings Doors that open Tap changer flashes
- Digital
On order, shipped within 10-15 days
Prototype Deutsche Reichsbahn Gesellschaft (DRG) Ep. II. E 70 08 suburban goods train electric locomotive. Model A completely newly designed model. The chassis features a main frame made of die-cast zinc, with a locomotive body constructed from sheet brass. Details are made from centrifugally cast brass. Equipped with an mfx digital decoder and 32 functions, with a configurable power buffer. Drive is provided to all axles. Extensive sound and light functions. Can be operated with AC, DC, Märklin Digital, and DCC. Centrally mounted high-performance motor with drive to all axles. The prototypical scissors-type pantograph can be raised and lowered motorised in digital operation. White dual headlights with LEDs alternating with a red tail lamp, digitally switchable. Switchable passing light. Warm white LED cab lighting. The driver's desks are illuminated. The engineer's cab doors open. The cab interior is a detailed replica, complete with a fitted engineer figure. Metal grab rails and many other separately applied details are present, such as plates, a whistle, and more. Buffer beams feature sprung buffers and fitted brake lines. A Telex coupling is fitted at the rear and is remotely operable; it can be exchanged for the included screw couplings. A prototypical screw coupling is fitted at the front. A Telex coupling for the front is included in the delivery. The minimum radius for operation is 1,020 mm. Length over the buffers is 31.3 cm. Weight is approx. 3 kg. Highlights mfx digital decoder with 32 functions power buffer electrically raised and lowered in digital operation scissors-type pantograph cab lighting illuminated fittings opening doors tap changer flashes
- Digital
On order, shipped within 10-15 days
Prototype Narrow-gauge freight electric locomotive EG 507 of the Royal Prussian Railway Administration (KPEV) EP. I. Model A completely newly designed model, finished with a transparent protective lacquer. The chassis features a main frame made of die-cast zinc, while the locomotive body is constructed from sheet brass. Details are made from centrifugally cast brass. Equipped with an mfx digital decoder and 31 functions, with a configurable power buffer. Drive on all axles. Extensive sound and light functions. Operation with AC, DC, Märklin Digital and DCC is possible. Centrally mounted high-performance motor with drive on all axles. In digital operation, the prototypical scissors-type pantograph can be raised and lowered. White dual headlights with LEDs alternating with a red tail lamp, digitally switchable. Passing light switchable. Warm white LED lighting in the cab. The driver's desk is illuminated. The cab doors open. The interior details are finely modelled. The cab includes a fitted engineer figure. Metal grab rails and many other separately applied details such as plates, whistle, etc. Buffer beams with sprung buffers and separately applied brake lines. A Telex coupling is fitted at the rear and can be operated remotely; it is replaceable with the included prototype screw couplings. A prototypical screw coupling is fitted at the front. A Telex coupling for the front is included in the delivery. The minimum radius for operation is 1,020 mm. Length over the buffers 31.3 cm. Weight approx. 3 kg. Highlights Highly detailed all-metal construction, transparently lacquered. mfx digital decoder with 31 functions Power buffer Can be raised and lowered under digital operation Scissors-type pantograph Cab lighting Illuminated fittings Doors that open
- Digital
On order, shipped within 10-15 days
Prototype DH 500 Ca diesel locomotive of the E+H railway and port company, Duisburg-Hamborn. No. 780. The locomotive looks as it did in Era V around 1995. Model Completely new tooling of the DH 500 Ca. Locomotive body, chassis with main frame, wheels and side rod made of die-cast zinc, applied parts mostly metal. With an mfx digital decoder and a built-in power buffer that can be parameterized. All axles powered. Extensive sound and light functions. Operation possible with AC, DC, Märklin Digital and DCC. Built-in high-performance motor. All axles powered. White triple headlights with LEDs changing over to a red marker light, can be controlled digitally. Warm white LED cab lighting that can be turned on and off. Cab doors can be opened, prototypical rendering of the cab interior, cab with a built-in engineer figure. Metal grab irons and many other applied details such as windshield wipers, bell, etc. Buffer beams with sprung buffers and applied brake lines. Factory-installed remote controlled Telex couplers on the front and rear. Telex couplers can be replaced with prototype screw couplers (not included). Minimum radius for operation 1,020 mm. Length over the buffers 27.8 cm. Weight approx. 3.5 kg Highlights mfx decoder Power buffer can be parameterized Cab lighting Doors can be opened Various sound functions Metal body
- Digital
- Sound
Pre-order, release expected in December 2026
Prototype Electric locomotive Ce 6/8 I "Köfferli" in a fir green colour scheme in the operating condition of Era III, at the beginning of the 1950s. Running number 14201. Model Chassis with main frame and locomotive body of die-cast zinc. Many separately applied centrifugally cast brass parts. The locomotive has an mfx digital decoder with up to 32 functions, a built-in power buffer, a regulated high-performance motor and extensive sound functions such as operating sounds, blowers, a locomotive whistle, multiple station stop announcements, station announcements, background sounds at the station and much more. It can be operated with AC power, DC power, Märklin Digital and DCC. High-efficiency motors with all axles powered. The scissors-type pantographs can be raised and lowered by motor in digital operation. White LED headlights change over with the direction of travel, will work in conventional operation and can be controlled digitally. White LED lighting in the cabs, dependent on the direction of travel. The engine room lighting can be controlled. Swiss lighting changeover in red and white, the wrong-line signal at the front can be controlled separately. Cab doors that open, interior details, cab with a locomotive driver figure. Metal handrails and many other separately applied details such as: plates, windscreen wipers, a whistle and much more. Buffer beams with sprung buffers and separately applied brake lines. A remote-controlled Telex coupler fitted as standard at the rear, a screw coupler at the front. Each can be exchanged for the other coupler type (included in the contents supplied). The minimum radius for operation is 1,020 mm. Length over the buffers 60.3 cm. Weight approximately 6.3 kg. Highlights Made of die-cast zinc with separately applied centrifugally cast brass parts Highly detailed professional model Scissors-type pantographs that can be raised and lowered by motor in digital operation Telex coupler at the front and rear that can be controlled digitally Extremely extensive sound equipment Power buffer Screw couplers for the front and rear included in the contents supplied
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Snow-covered electric locomotive Ce 6/8 I "Köfferli" in a fir green colour scheme in the operating condition of Era III, at the beginning of the 1950s. Running number 14201. Model Exclusive one-time series of a snow-covered Köfferli. Chassis with main frame and locomotive body of die-cast zinc. Many separately applied centrifugally cast brass parts. The locomotive has an mfx digital decoder with up to 32 functions, a built-in power buffer, a regulated high-performance motor and extensive sound functions such as operating sounds, blowers, a locomotive whistle, multiple station stop announcements, station announcements, background sounds at the station and much more. It can be operated with AC power, DC power, Märklin Digital and DCC. High-efficiency motors with all axles powered. The scissors-type pantographs can be raised and lowered by motor in digital operation. White LED headlights change over with the direction of travel, will work in conventional operation and can be controlled digitally. White LED lighting in the cabs, dependent on the direction of travel. The engine room lighting can be controlled. Swiss lighting changeover in red and white, the wrong-line signal at the front can be controlled separately. Cab doors that open, interior details, cab with a locomotive driver figure. Metal handrails and many other separately applied details such as: plates, windscreen wipers, a whistle and much more. Buffer beams with sprung buffers and separately applied brake lines. A remote-controlled Telex coupler fitted as standard at the rear, a screw coupler at the front. Each can be exchanged for the other coupler type (included in the contents supplied). Certificate of authenticity included in the contents supplied. The minimum radius for operation is 1,020 mm. Length over the buffers 60.3 cm. Weight approximately 6.3 kg. Highlights Exclusive model given a snow covering by hand Certificate of authenticity Made of die-cast zinc with separately applied centrifugally cast brass parts Highly detailed professional model Scissors-type pantographs that can be raised and lowered by motor in digital operation Telex coupler at the front and rear that can be controlled digitally Extremely extensive sound equipment Power buffer Screw couplers for the front and rear included in the contents supplied
- Digital
- Sound
On order, shipped within 10-15 days