Railcars & Multiple Units
Electric luggage railcar De 4/4 1669 of the Swiss Federal Railways. For the first time, available with PluX22 Interface and LED lighting Window in the luggage compartment with replicated grille bars A total of 11 Fe 4/4 units were equipped with an electric brake in 1930/31 and again in 1938 for operation on the Seetalbahn and the steep Vallorbe–Le Pont line. As part of a decision to modernise this sub-series, the Yverdon workshop rebuilt unit De 4/4 1669 in 1965/66. At the time, it was intended to serve as a prototype, was allocated to the Lausanne depot, and was already due for a major overhaul. The rebuilt railcar featured several upgrades, including: a driver's cab adapted for seated operation, new pneumatic equipment, a compressed-air main switch, a new contactor bank, and a closed driver's cab. The only feature that retained its traditional appearance was the classic dark green livery with a light grey underframe.
- 2-rail, direct current
In stock: 1 on the shelf, shipped within 1-3 days
8-piece long-distance double-deck train RABe 502 of the Swiss Federal Railways. New design! Finely detailed model to a scale of 1:87 Prototypical interior fittings in all coaches Features power distribution couplings between all coaches Elaborate design with many separately attached details With illuminated train destination displays at the front ends and on all coach bodies With switchable high beam and driver’s cab lighting in digital mode The new long-distance double-deck trains (FV-Dosto) belonging to the SBB connect all the different regions within Switzerland. Since summer 2022, a total of 30 IR200 (RABe 502) trains, 23 IC200 (RABDe 502) trains and nine IR100 (RABe 502) trains have been in service. This service covers large parts of Switzerland, with stations such as Geneva, Zurich, St. Gallen and Basel on the daily timetables.
- 2-rail, direct current
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Class RAe 4/8 electric double railcar "Churchill-Pfeil" of the Swiss Federal Railways (SBB). Used as a charter train for excursions and group trips. Fiery red basic paint scheme. Railcar running number RAe 4/8 1021. Current operating condition. Model The railcar has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a flywheel. The two axles in the outer bogie on vehicle section 1 are powered using cardan shafts. Traction tyres. Swiss lighting changeover, triple headlights, and 1 white tail lamp will work in conventional operation and can be controlled digitally. The headlights can be switched over to 1 red tail lamp. In addition, a red right-of-way signal (wrong-line signal) at the front in the direction of travel can be controlled digitally and changes over with the direction of travel. Interior lighting fitted as standard will work in conventional operation and can be controlled digitally. The cab lighting can each be controlled separately digitally. The table lamps can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. Four bogie fairings are included for exchanging for use on large radii or for display in a cabinet. Total length over the buffers approximately 53 cm. Highlights Completely new tooling Interior lighting fitted as standard. Can be switched over to a red tail lamp Cab lighting can be controlled digitally Table lamps can be controlled digitally Right-of-way signal can be controlled digitally Digital decoder with a wide variety of light and sound functions Note 75 years ago, in 1946, the Red Double Arrow was used to carry Winston Churchill as a state guest through Switzerland, which thereby gave the Double Arrow the nickname "Churchill-Pfeil".
- 2-rail, direct current
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Electric multiple unit of the type Siemens Desiro HC as the class 1462/1862 of the Deutsche Bahn AG (DB AG). One end car of the class 1462.0, 2nd class, one intermediate car of the class 1862.0, 2nd class, one intermediate car of the class 1862.5, 2nd class and one end car of the class 1462.5, 1st/2nd class. Vehicle of the Rheintal network. Livery in the Baden-Württemberg state design (bwegt). The train looks as it did starting in 2020. Model The train has a digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted in end car A. All four axles in both bogies powered using cardan shafts. Traction tyres. Power is supplied by the leading end car depending on the direction of travel. Special close couplers with a guide mechanism. The triple headlights change over with the direction of travel and, together with two red tail lamps, will work in conventional operation and can be controlled digitally. Double "A" light function. The prototypical long-distance headlight in two intensities, the cab and driver's desk lighting as well as the lighting for the destination displays on the ends and sides can be controlled digitally. LED interior lighting fitted as standard. A buffer capacitor is installed in each car to bridge brief sections without power. The interior lighting is supplied through the continuous electrical connection running the length of the train. Maintenance-free warm white and red LEDs are used for all of the lighting. Multi-coloured interior details. The pantographs can be raised and lowered digitally. Many separately applied details. The minimum radius for operation is 360 mm. Length of the train approximately 112.6 cm. Highlights Completely new tooling in a highly detailed version LED interior lighting with buffer capacitors fitted as standard Multi-coloured interior details Pantographs can be raised and lowered digitally Lighting for the destination displays can be controlled digitally Long-distance headlight in two intensity levels can be controlled digitally Cab and driver's desk lighting can be controlled digitally Many separately applied details Digital decoder with extensive light and sound functions DCC, mfx and RailCom capable
- 2-rail, direct current
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype EC 250 electric high-speed multiple unit as the RABe 501 "Giruno" of the Swiss Federal Railways (SBB). 1 end car A (Bt1), 2nd class. 1 intermediate car F (B7), 2nd class, with entrances for the handicapped and a pantograph. 1 intermediate car G (WR6), with a restaurant area. 1 intermediate car H (A5), 1st class, with entrances for the handicapped and a pantograph. 1 end car L (At2), 1st class. In use as a multi-system multiple unit between Zurich Airport and Basel as well as across the Alps through the Gotthard Base Tunnel as far as Milan. Approval also planned for Germany and Austria. Train number RABe 501 003, with the "San Gottardo" coat of arms. Current operating condition 2022. Model 5-part base set. The restaurant car G and the two intermediate cars F and H arranged to the left and right of it are permanently coupled to one another by means of the Jacobs bogies. The unit has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a flywheel, centrally mounted in the restaurant car. All 4 axles in both Jacobs bogies to the left and right of the restaurant car powered using cardan shafts. Traction tyres. The cabs in the end cars have interior details. Power supply by way of the leading end car, depending on the direction of travel. Guide mechanism in the Jacobs bogies. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. They can be changed over to a single white tail lamp (Swiss lighting changeover). Additional separately controllable light functions. Interior lighting fitted as standard. The interior lighting is supplied by way of the continuous electrical connection running through the whole train. In addition, the cab lighting and the driver's desk lighting can each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for all of the lighting. The pantographs on the intermediate cars F and H can each be raised and lowered separately as a digital function. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the base set approximately 112 cm. Highlights Completely new tooling True-to-scale reproduction 1:87. LED interior lighting fitted as standard Cab lighting and driver's desk lighting can be controlled digitally Pantographs on the intermediate cars F and H can be raised and lowered by means of a digital function Digital decoder with extensive light and sound functions Train number RABe 501 003, with the "San Gottardo" coat of arms Note The 5-part base set 25810 can be expanded with the 2-part add-on car sets 23281, 23282, and 23283 to make a prototypical 11-part multiple unit.
- 2-rail, direct current
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
ETR 400 "Frecciarossa" high-speed train, in service between Milano C.le and Paris Gare de Lyon in the celebratory livery of the first journeys entitled: "The pleasure of a new journey". Electric multiple unit consisting of eight illuminated coaches and six pantographs, with current collection selection according to the direction of travel. AC79205 - sound version.
On order, lead time to be confirmed
RENFE, S-114, 4-unit high-speed EMU "75 anniversary", ep. VI. N scale (1:160). Minimum radius 192 mm. Close coupler mechanism.
On order, lead time to be confirmed
RENFE, S-114, 4-unit high-speed EMU "75 anniversary", ep. VI, with DCC sound decoder. N scale (1:160). Minimum radius 192 mm. Close coupler mechanism.
On order, lead time to be confirmed
DB AG, eight-unit high-speed train ICE 3 class 403 in the new redesign, ep. VI. Close coupler mechanism.
On order, shipped within 4-5 days
DB AG, eight-unit high-speed train ICE 3 class 403 in the new redesign, ep. VI, with DCC sound decoder. Close coupler mechanism.
On order, lead time to be confirmed
Tram Duewag GT6, one front light, beige/red livery "Düsseldorf". N scale (1:160). Minimum radius 192 mm.
On order, lead time to be confirmed
Tram Duewag GT6, one front light, beige/red livery "Düsseldorf", with Multiprotocol Dound Decoder. N scale (1:160). Minimum radius 192 mm.
On order, lead time to be confirmed
Tram Duewag GT6, two front lights, "VBK Karlsruhe – Moninger-Bier". N scale (1:160). Minimum radius 192 mm.
On order, lead time to be confirmed
Tram Duewag GT6, two front lights, "VBK Karlsruhe – Moninger-Bier", with Multiprotocol Sound Decoder. N scale (1:160). Minimum radius 192 mm.
On order, shipped within 4-5 days
FS Trenitalia, 4-unit base set of the high-speed train "Frecciarossa 1000", "Ducati" advertising, ep. VI. N scale (1:160). Minimum radius 192 mm.
On order, shipped within 4-5 days
FS Trenitalia, 4-unit base set of the high-speed train "Frecciarossa 1000", "Ducati" advertising, ep. VI, with DCC decoder. N scale (1:160). Minimum radius 192 mm.
On order, shipped within 4-5 days
FS Trenitalia, 4-unit base set of the high-speed train "Frecciarossa 1000", "Ducati" advertising, ep. VI, with sound decoder. N scale (1:160). Minimum radius 192 mm.
On order, shipped within 4-5 days
FS Trenitalia, 4-unit base set of the high-speed train "Frecciarossa 1000", " Le plaisir d'un voyage nouveau" advertising, ep. VI. N scale (1:160). Minimum radius 192 mm.
On order, shipped within 4-5 days
FS Trenitalia, 4-unit base set of the high-speed train "Frecciarossa 1000", " Le plaisir d'un voyage nouveau" advertising, ep. VI, with DCC decoder. N scale (1:160). Minimum radius 192 mm.
On order, lead time to be confirmed
FS Trenitalia, 4-unit base set of the high-speed train "Frecciarossa 1000", " Le plaisir d'un voyage nouveau" advertising, ep. VI, with sound decoder. N scale (1:160). Minimum radius 192 mm.
On order, shipped within 4-5 days
Iryo, 4-unit base set of the high-speed train "Frecciarossa 1000", ep. VI, with sound decoder. N scale (1:160). Minimum radius 192 mm.
On order, lead time to be confirmed
SNCF, diesel railcar RGP II, with motor unit + trailer in re-built version, green/beige livery, ep. IV. N scale (1:160). Minimum radius 192 mm. Close coupler mechanism.
On order, lead time to be confirmed
SNCF, diesel railcar RGP II, with motor unit + trailer in re-built version, green/beige livery, ep. IV, with sound decoder. N scale (1:160). Minimum radius 192 mm. Close coupler mechanism.
On order, lead time to be confirmed
SNCF, diesel railcar RGP II, with motor unit + trailer in re-built version, orange/silver livery, ep. IV. N scale (1:160). Minimum radius 192 mm. Close coupler mechanism.
On order, shipped within 4-5 days