Sets & Extensions
Between 1973 and 1975, NS put a large number of sliding-wall vans into service in three batches. The Hbis vans with wagon code 1940 were built in 1974 to 1975 and are characterised by 3 ribs on the doors. Some of the vans featured a very large NS logo on the side, making them striking sights on the layout. All these vans were built by Talbot in Aachen. This type of wagon is also in service with CD. The Exact-Train Hbis with wagon code 1940 has the following features: NS Hbis in very fine execution Accurately reproduced remounting and execution of the underside of the wagon. Underside entirely in metal, guaranteeing very good running characteristics. All parts are very finely made in metal. This makes the parts less vulnerable. Many parts are finely etched. 8 AC wheelsets are also available for these wagons.
On order, lead time to be confirmed
Exact-Train presents a highly detailed wooden UIC Gs wagon from various railways. This will be the most detailed wagon in the Exact-Train range. The wagons were used throughout Europe. Some of the wagons were operated in the Europapark. Exact-Train reproduces these wagons with many details. The main features of these wagons are: Opening doors. With many types of roofs (Eastern European wagons can therefore be reproduced exactly). Sprung buffers, High self-weight so that wagons run stably on the track. Very detailed underframe. Steel handrails and many etched parts. All fragile parts are made in metal, so that breakage or loss of parts is prevented. Very accurate conversion to H0 scale. Wagons will appear in the version of many railways. AC and RP25 wheels will be available for this wagon. The design takes into account all the wishes of Märklin modellers. A few parts are still missing on the hand sample shown.
On order, lead time to be confirmed
Exact-Train is launching a highly detailed wooden UIC Gs wagon from various railway companies. This will be the most detailed wagon in the Exact-Train range. The wagons were used throughout Europe. Some of the wagons were operated in the Europapark. Exact-Train is reproducing these wagons with a great deal of detail. The main features of these wagons are: Doors that can be opened. A wide variety of roof types (allowing East European wagons to be reproduced exactly). Sprung buffers, High tare weight ensuring stable running on the track. Very detailed underframe. Steel handrails and many etched parts. All fragile parts are made in metal, preventing breakage or loss of parts. Very accurate H0 scale reproduction. Wagons will be available in the liveries of many railway companies. Both AC and RP25 wheelsets will be available for this wagon. The design takes into account all the requirements of Märklin modellers. A few parts are still missing from the hand sample shown.
On order, lead time to be confirmed
Exact-Train is launching a highly detailed wooden UIC Gs wagon from various railways. This will be the most detailed wagon in the Exact-Train range. The wagons were used throughout Europe. Some of the wagons were operated in the Europapark. Exact-Train reproduces these wagons with a great deal of detail. The main features of these wagons are: Doors that can be opened. A wide variety of roof types (allowing Eastern European wagons to be reproduced exactly). Sprung buffers, High tare weight ensuring stable running on the track. Very detailed underframe. Steel handrails and many etched parts. All fragile parts are made in metal, preventing breakage or loss of parts. Very accurate H0 scale reproduction. Wagons will be available in the liveries of many railways. Both AC and RP25 wheelsets will be available for this wagon. The design takes into account all the requirements of Märklin modellers. A few parts are still missing from the hand sample shown.
On order, lead time to be confirmed
Exact-Train presents a highly detailed wooden UIC Gs wagon from various railway companies. This will be the most detailed wagon in the Exact-Train range. The wagons operated throughout Europe. Some of the wagons were used in the Europapark. Exact-Train reproduces these wagons with a wealth of details. The main features of these wagons are: Doors that can be opened. With many types of roof (allowing East European wagons to be reproduced exactly). Sprung buffers, High tare weight so that the wagons run stably on the track. Very detailed underframe. Steel handrails and many etched parts. All fragile parts are made in metal, so as to prevent breakage or loss of parts. Very accurate scale conversion to H0. Wagons will appear in the livery of many railway companies. AC and RP25 wheelsets will be available for this wagon. The design takes into account all the requirements of Märklin modellers. A few parts are still missing from the hand sample shown.
On order, lead time to be confirmed
Exact-Train is launching a highly detailed wooden UIC Gs wagon from various railways. This will be the most detailed wagon in the Exact-Train range. The wagons operated throughout Europe. Some of the wagons were used in the Europapark. Exact-Train is reproducing these wagons with many details. The main features of these wagons are: Doors that can be opened. With many types of roofs (Eastern European wagons can therefore be reproduced exactly). Sprung buffers, High self-weight so that wagons run stably on the track. Very detailed underframe. Steel handrails and many etched parts. All breakable parts are made in metal, so that breaking or detaching of parts is prevented. Very accurate conversion to H0 scale. Wagons will appear in the version of many railways. AC and RP25 wheels will be available for this wagon. The design has taken into account all the wishes of Märklin modellers. A few parts are still missing on the hand sample shown.
On order, lead time to be confirmed
Exact-Train presents a highly detailed wooden UIC Gs wagon from various railway companies. This will be the most detailed wagon in the Exact-Train range. The wagons operated throughout Europe. Some of the wagons were used in the Europapark. Exact-Train reproduces these wagons with many details. The main features of these wagons are: Opening doors. With many types of roofs (Eastern European wagons can therefore be reproduced exactly). Spring buffers, High tare weight so that wagons run stably on the track. Very detailed underframe. Steel handrails and many etched parts. All fragile parts are made in metal, so that breaking or detaching of parts is prevented. Very accurate conversion to H0 scale. Wagons will appear in the version of many railway companies. AC and RP25 wheels will be available for this wagon. The design has taken into account all the wishes of Märklin modellers. A few parts are still missing on the hand sample shown.
On order, lead time to be confirmed
Type: Tbs 571, Era III, 1961/1962, Number: 1135 wagons in the Tbs series, Usage: Operated throughout Europe in Era III to V, Description: Finely detailed model with numerous separately applied metal parts, Couplings are short and conform to NEM standards, Base: Made of metal with a low centre of gravity (derailment-free), Full braking system, Windows: Etched metal lever with air flaps, Roof: Sliding roofs, Handles and levers: Metal, Buffers: Spring-loaded.
On order, lead time to be confirmed
Type: Tbs 571, Era III, 1961/1962, 1135 wagons in the Tbs series, used throughout Europe in Era III to V. Description: Finely detailed model with numerous separately applied metal parts. The couplings are short and conform to NEM standards. Base: Made of metal with a low centre of gravity (derailment-free). Complete braking system. Windows: Etched metal lever with air flaps. Roof: Sliding roofs. Handles and levers: Metal. Buffers: Spring-loaded.
On order, lead time to be confirmed
Type: Tbs 571, Era III, Year of construction: 1961/1962, Number: The Tbs series has 1135 vehicles, Deployment: Throughout Europe in Era III to V, Description: Finely detailed model with numerous separately applied metal parts. The couplings are short and conform to NEM standards. Base: Made of metal with a low centre of gravity (derailment-free). Complete braking system. Windows: Etched metal lever with air flaps. Roof: Sliding roofs. Handles and levers: Metal. Buffers: Sprung.
On order, lead time to be confirmed
Type: Tbs 571, Era III, 1961/1962, Number: 1135 wagons in the Tbs series, Usage: Throughout Europe in Era III to V, Description: Finely detailed model with numerous separately mounted metal parts. The couplings are short according to NEN standards. Base: Made of metal with a low centre of gravity (derailment-free). Complete braking system. Windows: Etched metal lever with air flaps. Roof: Sliding roofs. Handles and levers: Metal. Buffers: Spring-loaded.
On order, lead time to be confirmed
Type: Tbs 571 Era: III Year of manufacture: 1961/1962 Quantity: Geese Tbs series is 1135 wagons Deployment: Throughout Europe in Era III to V. Description: Finely detailed model with numerous separately mounted metal parts. The couplings are short according to the NEN standards. Underside: Made of metal with a low centre of gravity. (Derailment-free) Complete braking system. Windows: Etched metal lever with air flaps. Roof: Sliding roofs. Handles and levers: Metal. Buffers: Spring-loaded.
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
Set of 7 Nightjet coaches of the Austrian Federal Railways. The set contains a rear sleeping coach, type WLAmz, one sleeping coach, type WLAmz, three couchette coaches, type Bcmz, one multifunction coach, type ABbmpvz and one cab control coach, type Bfmpz. New design! Sophisticated control cab coach with separately applied plug-in parts Model fully equipped ex works Multi-part interior design Differently designed mini cabins for more variety (e.g.: open and closed doors) All coaches equipped with magnetic couplings End coach fitted with NEM shaft on the locomotive side Licensed ÖBB model The train, as an environmentally friendly alternative to the aeroplane, is a pioneer when it comes to sustainable means of transport. Since the end of 2016, ÖBB, one of the largest transport companies in Europe, has been operating a dense and attractive night train service with popular destinations in large parts of Europe. ÖBB and "Siemens Mobility", the manufacturer of rail vehicles, will be putting a total of thirty seven-part sets of the new "Nightjet" into operation over the next few years. They will each consist of two seating coaches, three couchette coaches and two sleeper coaches, which will offer maximum comfort and a high-quality interior design. Attention: When operating on digital systems, the control coach must be equipped with an appropriate decoder. Please refer to the operating instructions!
On order, shipped within 10-15 days
Set of three Eurofima passenger coaches, type Bmz, of the Austrian Federal Railways. Version as a seating coach with an attractive "Nightjet" design Two coaches in the new "Nightjet" livery With the timetable change in December 2016, ÖBB launched its Europe-wide night train service under the brand name Nightjet. Since December 2017, Nightjet (NJ) has also been designated as a train category. The initial redesign of the coaches was carried out using adhesive films. The striking design featured a dark night blue colour with elements reminiscent of a starry sky. Coaches previously styled in the original Nightjet design were later given a makeover. Instead of adhesive films, a painted finish in the colours of the latest Nightjet design was preferred. The once-prominent starry sky motif is now a thing of the past.
On order, shipped within 10-15 days
Wagon set (2) with two commuter coaches of the Deutsche Bahn from the Stuttgart area. The set contains a 2nd class commuter coach, type Bn 719, and a 2nd class commuter coach, type Bnr 725, in "Silberling" design. Coaches in condition as of the late 1990s Elaborate printing in the typical peacock eye pattern Each coach with an ocean blue longitudinal beam Suitable for electric locomotive 110 504, item nos. 7560082, 7570082
On order, shipped within 10-15 days
Wagon set (1) with two "Voralpen-Express" coaches from various Swiss railway companies. The set contains an EW-IV 2nd class coach, type B, from the Südostbahn (SOB) and an EW-IV 2nd class coach, type B, from the Bodensee-Toggenburg-Bahn (BT).
On order, shipped within 10-15 days