Signals
With 2 uncoupled negative arms and an openwork, grey lattice mast. Changes from red (Hp 0) to green (Hp 1) or from red (Hp 0) to green/yellow (Hp 2).
On order, shipped within 10-15 days
Model With 2 uncoupled arms and an openwork lattice mast without a mast plate. Colour scheme of the lattice mast in black, white and red. Prototypical height of the lower section in black for below-baseboard operation. Changes from red (Hp 0) to green (Hp 1) or from red (Hp 0) to green/green (Hp 2). One-time series 150 years of the first signalling regulations for the railways in Germany.
On order, shipped within 10-15 days
Mast with a movable front and rear shutter.
On order, shipped within 10-15 days
Grey mast with a movable front and rear shutter.
On order, shipped within 10-15 days
Model Simple ground signal without a mast for use in shunting and station areas. Change from Sh0 (red/red) to Sh1 (yellow/yellow). Control of the traction current by means of the 72751 control panel. Maintenance-free LEDs. Height without the base approx. 10 mm. Matching control panel 72751. The 74371 signal cannot be controlled with other control panels! Highlights Ground signal for use in shunting and station areas Height without the base approx. 1 cm The 72751 control panel is required for control Note Can also be used in digital operation with the m84 decoder (60841).
On order, shipped within 10-15 days
Prototype Ground signal in the standard design of the German Federal Railway (DB). Dwarf signal without a mast. 2 aspects: "Stop, no movement permitted" - red/red (Sh0) and "Movement permitted" - white/white (Sh1). Model With integrated signal electronics and 1 separate signal decoder. Plug contact on the narrow foot of the signal head. Signal head with small sun visors. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the address can be assigned and tested before installation. There are connections on the signal decoder for train control. Height without the base 10.0 mm. Highlights Ground signal for use in the shunting area Signal head on a prototypically narrow stand Sh1 aspect correctly with 2 white lights
On order, shipped within 10-15 days
Prototype Ground signal in the standard design of the German Federal Railway (DB). High signal with a tubular mast. 2 aspects: "Stop, no movement permitted" - red/red (Sh0) and "Movement permitted" - white/white (Sh1). Model With integrated signal electronics and 1 separate signal decoder. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the address can be assigned and tested before installation. There are connections on the signal decoder for train control. Height without the base 50.0 mm. Highlights Ground signal for use in the shunting area Prototypically thin tubular mast Sh1 aspect correctly with 2 white lights
On order, shipped within 10-15 days
Prototype Exit signal in the standard design of the German Federal Railway (DB). 4 aspects: "Stop" - red/red (Hp00), "Clear" - green (Hp1) and "Slow speed" - green/yellow (Hp2) as well as "Stop for trains, shunting permitted" - red/white/white (Hp0/Sh1). Model With integrated signal electronics and 1 separate signal decoder. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the address can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 distant signal. Height without the base 78 mm. Highlights Exit signal for use in stations Matching distant signal separately as item no. 76480 and 76481 or on the entry signal item no. 76497 Integrated ground signal with a white light
On order, shipped within 10-15 days
Prototype Block signal with a distant signal in the standard design of the German Federal Railway (DB) on the same signal mast. Main signal with 2 aspects as with item no. 76491. Distant signal with 3 aspects as with item no. 76480 / 76481. Model With 2 integrated signal electronics units and 1 separate signal decoder. The distant signal can be used for all main signals. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the addresses for both signals can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 additional distant signal. Height without the base 78.0 mm. Highlights 2 signals on one mast without an additional connection Block signal for use on the line Distant signal for use ahead of a block signal or an entry signal
On order, shipped within 10-15 days
Prototype Exit signal with a distant signal in the standard design of the German Federal Railway (DB) on the same signal mast. Main signal with 4 aspects as with item no. 76494. Distant signal with 3 aspects as with item no. 76480 / 76481. Model With 2 integrated signal electronics units and 1 separate signal decoder. The distant signal can be used for all main signals. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the addresses for both signals can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 additional distant signal. Height without the base 78.0 mm. Highlights 2 signals on one mast without an additional connection Exit signal for use at the end of a station or at the entrance to the main line Distant signal for use ahead of a block signal or an entry signal
On order, shipped within 10-15 days
Prototype Entry signal with a distant signal in the standard design of the German Federal Railway (DB) on the same signal mast. Main signal with 3 aspects as with item no. 76493. Distant signal with 3 aspects as with item no. 76480 / 76481. Model With 2 integrated signal electronics units and 1 separate signal decoder. The distant signal can be used for all main signals. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the addresses for both signals can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 additional distant signal. Height without the base 78.0 mm. Highlights 2 signals on one mast without an additional connection Entry signal for use ahead of stations Distant signal for use ahead of an exit signal
On order, shipped within 10-15 days
Connection adapter, for example for connecting consumers such as signals to a switched-mode power supply. Equipped with a matching socket and 2 plugs (71411, 71412). Total length approx. 145 mm.
On order, shipped within 10-15 days
2 positions: "Stop" (Hp0) and "Proceed" (Hp1). LED lighting. Height 34 mm.
On order, shipped within 10-15 days
3 positions: "Stop" (Hp0), "Proceed" (Hp1) and "Slow speed" (Hp2). LED lighting. Height 34 mm.
On order, shipped within 10-15 days
4 positions: "Stop" (Hp00), "Proceed" (Hp1), "Slow speed" (Hp2) and "Train stop, shunting permitted" (Hp00/Sh1). LED lighting. Height 34 mm.
On order, shipped within 10-15 days
2 positions: "Stop, movement prohibited" (Sh0), "Movement prohibition lifted" (Sh1). Warm white/red LED lighting. Height 7 mm.
On order, shipped within 10-15 days
Model 2 positions: "Stop" (Hp0) and "Proceed" (Hp1). Single arm, with LED lighting and a below-baseboard drive permanently connected to the signal. Height 48 mm. Installation depth 65 mm, drill hole diameter 13 mm. Highlights Below-baseboard drive Slow arm movement
On order, shipped within 10-15 days
Model 2 positions: "Stop" (Hp0) and "Slow speed" (Hp2). 2 coupled arms, with LED lighting and a below-baseboard drive permanently connected to the signal. Height 48 mm. Installation depth 65 mm, drill hole diameter 13 mm. Highlights Below-baseboard drive Slow arm movement
On order, shipped within 10-15 days
With 2 single-pole switches and 1 changeover switch, for example for controlling the light change in the 8939 signal and the track power. Width 30 mm. Length 70 mm. Height 8 mm.
On order, shipped within 10-15 days
Signal switch with feedback and train control. With one switch, two two-aspect light signals (e.g. 40020, 40021, 40600, 40601, 40602, 40603, 40604) can be operated without magnetic drive. Further switches can be plugged into the side.
On order, shipped within 10-15 days
Z21 signal DECODER The Z21 signal DECODER is a universally applicable DCC decoder for complex light signals. Operation is even easier with the Z21 app as the signal types are also stored in the app and can be read out automatically from the decoder. This can be conveniently done via Z21 pro LINK. Updateable Extensively configurable RailCom compatible Over 30 signal types are included, such as: Germany: H/V signals, Ks signals, HI signals, block signals, ... Austria: Main signals class 1980 and 1954, pre-signals, protections signals, ... Switzerland: System L, system N, Signals for shunting service, ... Additional signal types can of course be added by using the update function via the Z21 pro LINK. RailCom is a registered trademark of the company Lenz Elektronik GmbH.
On order, shipped within 10-15 days
Main aspect signal
On order, shipped within 10-15 days
Triplicated aspect signal of the SNCF. The signal is factory-equipped with the third, orange LED in conformity with the SNCF signal manual. Owing to the major difference in the meaning of the signal illustrations, please pay heed to the information in the operating instructions.
On order, shipped within 10-15 days
Signal in standard construction, with finely detailed brass mast, authentic varnishing and patented base socket for easy mounting. With 4 LEDs, maintenance free. Signal pictures Vr0, Vr1 and Vr2.
On order, shipped within 10-15 days