Signals
SBB main signal with two LEDs (green/red), N scale. The black signal head with chamfered corners and a light-coloured rim carries two stacked optics. It is mounted on a light-grey openwork mast with a full-height ladder, standing on a pale rectangular base; a small bracket is fitted behind the head. The photograph shows the unlit model on a diorama beside the track.
In stock: 1 on the shelf, shipped within 1-3 days
The signal has one arm and an openwork lattice mast. It changes from red to green.
In stock: 1 on the shelf, shipped within 1-3 days
With 2 uncoupled arms and an openwork, grey lattice mast. Changes from red (Hp 0) to green (Hp 1) or from red (Hp 0) to green/yellow (Hp 2).
In stock: 1 on the shelf, shipped within 1-3 days
On green, the journey continues! Another train has the right of way! Good thing you saw the signal. If you wait and count to 7, the signal changes to green. Child-friendly, battery-powered signal made of sturdy plastic. Lighting with one green and one red LED. The light signal changes either at the push of a button or automatically after 7 seconds. The battery compartment is integrated into the base of the signal. 2 AAA batteries included. Height of the signal approx. 12 cm. Since this product is a toy for children ages 3 and up, the signal has no effect on the layout! The battery-powered signal is the ideal supplement to the battery-powered trains 29200, 29201, 29202, 29203, 29204, 29206, 29210 and 29270.
In stock: 1 on the shelf, shipped within 1-3 days
Model Simple distant signal for use ahead of main signals. Change from Vr0 (yellow/yellow) to Vr1 (green/green). Control of the traction current by means of the 72751 control panel. Maintenance-free LEDs. Height without the base approx. 61 mm. Matching control panel 72751. The 74380 signal cannot be controlled with other control panels! Highlights Distant signal for use ahead of the 74391 main signal Height without the base approx. 6 cm The 72751 control panel is required for control Note Can also be used in digital operation with the m84 decoder (60841).
In stock: 1 on the shelf, shipped within 1-3 days
Prototype: Block signal with distant signal in the standard design of the Deutsche Bundesbahn (DB) on the same signal support. Main signal with 2 aspects as item no. 76391. Distant signal with 3 aspects as item no. 76383.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Distant signal in the standard design of the German Federal Railway (DB). Distant signal with 3 aspects: "Expect stop" - yellow/yellow (Vr0), "Expect clear" - green/green (Vr1) and "Expect slow speed" - green/yellow (Vr2). Model With integrated signal electronics. Connection to the separate signal decoder of the associated main signal. Can be used for all main signals. All functions are controlled with the signal decoder of the main signal. For digital operation, the configuration and the address are assigned by the signal decoder of the main signal. Height without the base 61 mm. Highlights Distant signal can be used for all main signals The associated signal aspects are assigned automatically when it is connected
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Distant signal with a supplementary light in the standard design of the German Federal Railway (DB). Distant signal with 3 aspects: "Expect stop" - yellow/yellow (Vr0), "Expect clear" - green/green (Vr1) and "Expect slow speed" - green/yellow (Vr2). The white supplementary light means that the distance between the distant signal and the main signal is shorter than the regular braking distance. Model With integrated signal electronics. Connection to the separate signal decoder of the associated main signal. Can be used for all main signals. All functions are controlled with the signal decoder of the main signal. For digital operation, the configuration and the address are assigned by the signal decoder of the main signal. Height without the base 61 mm. Highlights Distant signal can be used for all main signals The associated signal aspects are assigned automatically when it is connected
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Block signal in the standard design of the German Federal Railway (DB). 2 aspects: "Stop" - red (Hp0) and "Clear" - green (Hp1). Model With integrated signal electronics and 1 separate signal decoder. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the address can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 distant signal. Height without the base 78 mm. Highlights Block signal for use on the line Matching distant signal separately as item no. 76480 and 76481 or on the signals item no. 76495 and 76496
In stock: 1 on the shelf, shipped within 1-3 days
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.
In stock: 1 on the shelf, shipped within 1-3 days
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 3 LEDs, maintenance free. Signal pictures Hp0, Hp1 and Hp2. Suitable control module: item 5222. Height: 7,9 cm.
In stock: 1 on the shelf, shipped within 1-3 days
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Powerful low noise drive. Integrated multi protocol digital decoder for DCC/MM. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. By factory setting the signal bouncing is adjusted. Compact overfloor drive is only 4,5 mm high and includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. Signal aspects Hp0 and Hp1. Height: 7,2 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.
In stock: 1 on the shelf, shipped within 1-3 days
With filigree brass mast, authentic varnishing and base socket for easy mounting. With 3 LEDs, maintenance free. Signal aspect Ra11. Height: 6,5 cm.
In stock: 1 on the shelf, shipped within 1-3 days
The N-type signaling system was introduced in 1986, gradually replacing the signals of the L-type on the standard gauge network, especially on the SBB and BLS. Each of these signals can serve as a distant signal. The brass mast is produced with filigree photo-etching technique. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance free by LED lighting. Easy mounting and connection with cylinder base socket. Height: 7.8 cm
In stock: 1 on the shelf, shipped within 1-3 days
The N-type signaling system was introduced in 1986, gradually replacing the signals of the L-type on the standard gauge network, especially on the SBB and BLS. Each of these signals can serve as a distant signal. The filigree brass mast is produced with photo-etching technique. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance free by LED lighting. Easy mounting and connection with cylinder base socket. Height: 7.7 cm
In stock: 1 on the shelf, shipped within 1-3 days
2 LEDs, control: red or green. The Busch models are scale replicas of the originals. A new plastic injection-moulding technique has made it possible to make the parts as fine and delicate as was previously possible only with brass etching. LEDs ensure an unlimited service life, a prototypical lighting effect and low power consumption. Thanks to an exchangeable plug-in base, the signals can either be glued in place or inserted into holes drilled in the layout baseboard.
On order, lead time to be confirmed
4 LEDs, control: red, red/red, green or green/yellow. The Busch models are scale replicas of the originals. A new plastic injection-moulding technique has made it possible to make the parts as fine and delicate as was previously possible only with brass etching. LEDs ensure an unlimited service life, a prototypical lighting effect and low power consumption. Thanks to an exchangeable plug-in base, the signals can either be glued in place or inserted into holes drilled in the layout baseboard.
On order, lead time to be confirmed
4 LEDs, control: green/green, yellow/yellow or green/yellow. The Busch models are scale replicas of the originals. A new plastic injection-moulding technique has made it possible to make the parts as fine and delicate as was previously possible only with brass etching. LEDs ensure an unlimited service life, a prototypical lighting effect and low power consumption. Thanks to an exchangeable plug-in base, the signals can either be glued in place or inserted into holes drilled in the layout baseboard.
On order, lead time to be confirmed
6 LEDs, for all prototypical display functions. The Busch models are scale replicas of the originals. A new plastic injection-moulding technique has made it possible to make the parts as fine and delicate as was previously possible only with brass etching. LEDs ensure an unlimited service life, a prototypical lighting effect and low power consumption. Thanks to an exchangeable plug-in base, the signals can either be glued in place or inserted into holes drilled in the layout baseboard.
On order, lead time to be confirmed
8 LEDs, for all prototypical display functions. The Busch models are scale replicas of the originals. A new plastic injection-moulding technique has made it possible to make the parts as fine and delicate as was previously possible only with brass etching. LEDs ensure an unlimited service life, a prototypical lighting effect and low power consumption. Thanks to an exchangeable plug-in base, the signals can either be glued in place or inserted into holes drilled in the layout baseboard.
On order, lead time to be confirmed
10 signals for self-assembly (without function): 2 block, main and flashing light monitoring signals each, 1 departure, distant and ground signal each (low and high). Cost-effective alternative for the prototypical design of model railway layouts. Ideally suited if, for example, the signals in certain parts of the layout are only visible from the rear (no function required) or if a layout is to be «signalled» in a prototypical manner, but signals with function are too expensive.
On order, lead time to be confirmed
12 signals for self-assembly (without function). An affordable alternative for prototypical layout design. Ideally suited for situations where signals are only visible from the rear in certain sections of the layout (no function required) or when a layout is to be signalled in a prototypical manner but functional signals are too expensive.
On order, lead time to be confirmed
To operate double-arm semaphore signals with electric motor.
On order, shipped within 10-15 days
With train control - to operate colour light signals without electric motor.
On order, shipped within 10-15 days