Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Track System

Filter products
12% off the recommended price
Control track
Roco 61117 Scale H0
Control track

Switching track with potential-free switch contact, length 100 mm. Triggers a switching pulse while running axles with a wheel flange height of 1.1 mm (ROCO standard). Using wheel flanges with a varying height can result in malfunctions. With fault clearance to avoid switching spikes. With buffer protection Can also be used as feedback-momentary contact along with feedback module 10787 or detector 10808.

Selling price: CHF 22.90 RRP CHF 26.20

In stock, shipped within 1-3 days

13% off the recommended price
3-way turnout
Roco 61160 Scale H0
3-way turnout

Three-way turnout, symmetrical, manually operated. Length 200 mm (standard length), branch angle, 22.5° each, branch radius 502.7 mm each. The two manual turnout mechanisms can be replaced by the electric turnout mechanism 61195. For digital operation is the special turnout decoder 61196 available. Due to the electrical requirements of this type of turnout it is delivered with factory installed polarization.

Selling price: CHF 47.90 RRP CHF 55.60

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Electric Solenoid Turnout Mechanism for a Right Turnout
Trix 14935 Scale N
Minitrix Electric Solenoid Turnout Mechanism for a Right Turnout

(Below-baseboard mounting on the left).

Selling price: CHF 20.40 RRP CHF 23.99

In stock, shipped within 1-3 days

14% off the recommended price
Right Turnout Lantern
Trix 66742 Scale N
Right Turnout Lantern

Point lantern, right

Selling price: CHF 3.85 RRP CHF 4.49

In stock, shipped within 1-3 days

13% off the recommended price
N-crossing 30°
Fleischmann 22244 Scale N
N-crossing 30°

Crossing. Length of tracks 104.2 mm, Crossing angle 30°. The crossing tracks are isolated from each other so that two independent power circuits can cross each other.

Selling price: CHF 8.60 RRP CHF 9.90

In stock: 5 on the shelf, shipped within 1-3 days

13% off the recommended price
N-crossing 15°
Fleischmann 22245 Scale N
N-crossing 15°

Crossing. Length of tracks 112.6 mm, Crossing angle 15°. The crossing tracks are isolated from each other so that two independent power circuits can cross each other.

Selling price: CHF 6.40 RRP CHF 7.40

In stock: 5 on the shelf, shipped within 1-3 days

11% off the recommended price
Electric turnout, right
Fleischmann 22263 Scale N
Electric turnout, right

Turnout right hand with electric turnout mechanism. Length 112.6 mm, branch angle 15°, branch radius 362.6 mm (corresponds to R5).

Selling price: CHF 24.90 RRP CHF 28.20

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Metal Rail Joiners, 10 Pieces
LGB 10001 Scale G
Metal Rail Joiners, 10 Pieces

The metal fishplates serve as spare parts. They are also suitable for use with the flexible track (LGB 10003/10005). The pack contains 10 pieces.

Content: 10 pc. (CHF 0.66 / 1 pc.)

Selling price: CHF 6.55 RRP CHF 7.69

In stock: 5 on the shelf, shipped within 1-3 days

13% off the recommended price
Left Curved Turnout Outer Curve 30° in the Parallel Curve Spacing of 64.6 mm / 2-1/2"
Märklin 2268 Scale H0
Left Curved Turnout Outer Curve 30° in the Parallel Curve Spacing of 64.6 mm / 2-1/2"

Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model With a removable electromagnetic drive (75491). Inner curve 30°. Outer curve 30° at a parallel circuit spacing of 64.6 mm. The length and curvature of the inner curve correspond to 2221. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track

Selling price: CHF 51.90 RRP CHF 59.99

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Märklin Double Slip Switch Length (DSS) 188.3 mm / 7-13/32"
Märklin 24624 Scale H0
Märklin Double Slip Switch Length (DSS) 188.3 mm / 7-13/32"

Prototype The Märklin double slip combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin double slip with a length of 188.3 mm / 24.3°. With a built-in 74491 electric point motor and an illuminated point lantern. The 74462 digital decoder can be retrofitted. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet

Selling price: CHF 76.90 RRP CHF 89.99

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Märklin Wide-Angle Double Slip Switch (DSS) Length 236.1 mm / 9-5/16"
Märklin 24720 Scale H0
Märklin Wide-Angle Double Slip Switch (DSS) Length 236.1 mm / 9-5/16"

Prototype The Märklin point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Length 236.1 mm. Crossing angle 12.1°. With a built-in 74491 electric point motor. With a manual control lever. Four 24071 tracks are required at the ends of the double slip (not included with the 24720). Two matching ballast base wedges are included. The 74477 point lantern and the 74467 digital decoder can be retrofitted. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet

Selling price: CHF 85.90 RRP CHF 99.99

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Märklin Uncoupler Track Length 94.2 mm / 3-11/16"
Märklin 24997 Scale H0
Märklin Uncoupler Track Length 94.2 mm / 3-11/16"

Prototype The Märklin uncoupler track combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and, with special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Märklin uncoupler track with a length of 94.2 mm. Electric. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Märklin H0 system: the Märklin track systems can be combined with one another at any time thanks to transition tracks. Reliable centre conductor operation and the common return on both rails are always retained and thus allow great track arrangements without complicated wiring (for example for reversing loops and track triangles). Perfect connection: the mechanical and electrical connection between two C tracks is not visible from the outside. The line thus looks as if it were made from a single length, just as on the prototype. Special fishplates are not required. Invisible strength: thanks to this stable click connection on the underside of the track, the geometry of the line can be maintained precisely without having to screw the tracks down. They can therefore be assembled at any time and quickly dismantled again. Anywhere! Versatile space: the ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Use our Gleisplanung planning software, item no. 60521, to plan your model railway Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Quick assembly and dismantling thanks to the stable click connection, even on carpet

Selling price: CHF 28.90 RRP CHF 33.99

In stock: 5 on the shelf, shipped within 1-3 days

11% off the recommended price
Track Bumper
Märklin 7389 Scale H0
Track Bumper

With an illuminated ground signal. Maintenance-free LED. Length 38 mm. For snapping onto the rails. A raised countersunk head wood screw is included.

Selling price: CHF 11.90 RRP CHF 13.49

In stock: 5 on the shelf, shipped within 1-3 days

13% off the recommended price
Track Bumper
Märklin 7391 Scale H0
Track Bumper

Length 38 mm. For snapping onto the rails. A raised countersunk head wood screw is included.

Selling price: CHF 5.60 RRP CHF 6.49

In stock: 5 on the shelf, shipped within 1-3 days

13% off the recommended price
Signal Feeder Wire Set for C Track, 100 cm / 39"
Märklin 74043 Scale H0
Signal Feeder Wire Set for C Track, 100 cm / 39"

For older colour light signals (7239 to 7242) and semaphore signals (7039 to 7042) that are equipped for K track or M track. Contains insulators, connecting cables and connections for one signal section.

Selling price: CHF 6.80 RRP CHF 7.89

In stock: 5 on the shelf, shipped within 1-3 days

12% off the recommended price
Straight Adjustment Track Length 108.6 mm / 4-1/4"
Märklin 8506 Scale Z
Straight Adjustment Track Length 108.6 mm / 4-1/4"

Prototype Märklin track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals alike. Model Märklin straight adjustment track with a length of 108.6 mm. For compensating the length of the 8559 crossing and the 8560 double slip point. The click connection with the "Click". Set up and taken down in no time at all. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Fast setting up and taking down

Selling price: CHF 4.00 RRP CHF 4.59

In stock: 5 on the shelf, shipped within 1-3 days

13% off the recommended price
Track nails long
Roco 10001
Track nails long

Track fixing pins, long. For fastening GEOLINE and ROCO LINE tracks with roadbed, approx. 500 units per bag.

Selling price: CHF 7.70 RRP CHF 8.90

In stock: 5 on the shelf, shipped within 1-3 days

10% off the recommended price
Flextrack G800
Roco 61106 Scale H0
Flextrack G800

Flexible track G800. Length 785 mm. To equalise differences in length, use set of sleeper end pieces 61183.

Selling price: CHF 15.90 RRP CHF 17.80

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Rerailer for Track with Concrete Ties Length 104.2 mm / 4-1/8"
Trix 14574 Scale N
Minitrix Rerailer for Track with Concrete Ties Length 104.2 mm / 4-1/8"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model For re-railing derailed vehicles while running. 104.2 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, swarf left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix track has solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For expanding your layout easily there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a re-railing device for track with concrete sleepers 104.2 mm The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The material and rail profile provide reliable contact for transmitting current to the wheel

Selling price: CHF 4.20 RRP CHF 4.89

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Track Bumper with Concrete Ties Length 50.0 mm / 1-15/16"
Trix 14591 Scale N
Minitrix Track Bumper with Concrete Ties Length 50.0 mm / 1-15/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 50.0 mm in profile construction. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, swarf left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix track has solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For expanding your layout easily there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a buffer stop with concrete sleepers 50.0 mm The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The distance between the centres of two tracks is 33.6 millimetres

Selling price: CHF 6.80 RRP CHF 7.99

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Right Turnout Length 104.2 mm / 4-1/8"
Trix 14953 Scale N
Minitrix Right Turnout Length 104.2 mm / 4-1/8"

Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix right-hand point 30°/24°. Straight track 104.2 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curve radius = R 1 - 24° or, with a 6° track plugged on, = R 1- 30°. Stop-point function optional. An electromagnetic drive can be fitted later. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 25.50 RRP CHF 29.99

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Trix H0 Double Slip Switch Length 188.3 mm / 7-3/8" / Crossing Angle = 24.3° Curve / Radius 437.5 mm / 17-1/4" (R2)
Trix 62624 Scale H0
Trix H0 Double Slip Switch Length 188.3 mm / 7-3/8" / Crossing Angle = 24.3° Curve / Radius 437.5 mm / 17-1/4" (R2)

Prototype The Trix H0 double slip point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 double slip point with a length of 188.3 mm / crossing angle = arc of 24.3° / radius of 437.5 mm (R2). With a manual control lever, 74491 electric drive and an illuminated point lantern. Point decoder can be retrofitted. The slip point can be used to the right and to the left. Unambiguous setting for the curved route or the through route. The electric drive and lantern are already installed. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance. Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet

Selling price: CHF 76.50 RRP CHF 89.99

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Trix H0 Crossing Length 103.3 mm / 4-1/16"
Trix 62649 Scale H0
Trix H0 Crossing Length 103.3 mm / 4-1/16"

Prototype The Trix H0 crossing combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Crossing with a length of 103.3 mm, 48.6°. For double track connections or crossing parallel lines. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on a carpet

Selling price: CHF 25.50 RRP CHF 29.99

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Rail Joiners (Metal), pack of 20
Trix 66525 Scale N
Rail Joiners (Metal), pack of 20

Primarily for connecting the 14901 flexible tracks to each other and to other tracks. 20 pieces/pack.

Content: 20 pc. (CHF 0.27 / 1 pc.)

Selling price: CHF 5.30 RRP CHF 6.19

In stock: 5 on the shelf, shipped within 1-3 days