Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Track System

Filter products
13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 228.2 mm / 9"
Trix 14526 Scale N
Minitrix Curved Track with Concrete Ties Radius 228.2 mm / 9"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 2 (228.2 mm) - 7.5°. 2 tracks = 14524. 4 tracks = 14522. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 228.2 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 362.6 mm / 14-1/4"
Trix 14527 Scale N
Minitrix Curved Track with Concrete Ties Radius 362.6 mm / 14-1/4"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 4 (362.6 mm) - 15°. Circle = 24 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 362.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.75 RRP CHF 3.19

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 526.2 mm / 20-11/16"
Trix 14528 Scale N
Minitrix Curved Track with Concrete Ties Radius 526.2 mm / 20-11/16"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 6 (526.2 mm) - 15°. Circle = 24 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 526.2 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.75 RRP CHF 3.19

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 295.4 mm / 11-5/8"
Trix 14529 Scale N
Minitrix Curved Track with Concrete Ties Radius 295.4 mm / 11-5/8"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 2b (295.4 mm) - 7.5°. 2 tracks = 14521. 4 tracks = 14520. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 295.4 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.50 RRP CHF 2.89

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Adapter Track with Concrete Ties Length 104.2 mm / 4-1/8"
Trix 14590 Scale N
Minitrix Adapter Track with Concrete Ties Length 104.2 mm / 4-1/8"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model Transition track for connecting to the previous Minitrix track system (item number beginning with 149xx) 104.2 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, swarf left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix track has solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For expanding your layout easily there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a transition track with concrete sleepers 104.2 mm The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The distance between the centres of two tracks is 33.6 millimetres

Selling price: CHF 3.00 RRP CHF 3.49

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 108.4 mm / 4-1/4"
Trix 14593 Scale N
Minitrix Straight Track with Concrete Ties Length 108.4 mm / 4-1/4"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 108.4 mm = 2 x 14506. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, swarf left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix track has solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For expanding your layout easily there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a straight track with concrete sleepers 108.4 mm The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The distance between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.55 RRP CHF 2.99

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 126.3 mm / 4-15/16"
Trix 14594 Scale N
Minitrix Straight Track with Concrete Ties Length 126.3 mm / 4-15/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 126.3 mm = 14505 + 14507. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, swarf left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix track has solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For expanding your layout easily there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a straight track with concrete sleepers 126.3 mm The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The distance between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.55 RRP CHF 2.99

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Straight Track Length 312.6 mm / 12-5/16"
Trix 14902 Scale N
Minitrix Straight Track Length 312.6 mm / 12-5/16"

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be expanded as desired. The ideal track system for newcomers and professionals. Model Minitrix straight track with a length of 312.6 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, swarf left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix track has solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For expanding your layout easily there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operating reliability Quick to set up and take down

Selling price: CHF 4.55 RRP CHF 5.29

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Curved Track Radius 194.6 mm / 7-5/16"
Trix 14916 Scale N
Minitrix Curved Track Radius 194.6 mm / 7-5/16"

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and experts. Model Minitrix curved track with a radius R1 of 194.6 mm - 6°. 5 tracks = 14912. 4 tracks = 14914. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is the careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For easily expanding the layout there are also various track extension sets with item no. 14311 and 14312. This makes it easy to build up parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operational reliability Quick setting up and taking down

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track Radius 295.4 mm / 11-9/16"
Trix 14921 Scale N
Minitrix Curved Track Radius 295.4 mm / 11-9/16"

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and experts. Model Minitrix curved track with a radius R 2b of 295.4 mm - 15°. Circle = 24 tracks. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is the careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For easily expanding the layout there are also various track extension sets with item no. 14311 and 14312. This makes it easy to build up parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operational reliability Quick setting up and taking down

Selling price: CHF 2.50 RRP CHF 2.89

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track Radius 228.2 mm / 9.0"
Trix 14926 Scale N
Minitrix Curved Track Radius 228.2 mm / 9.0"

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and experts. Model Minitrix curved track with a radius R 2 of 228.2 mm - 6°. 5 tracks = 14922. 4 tracks = 14924. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is the careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For easily expanding the layout there are also various track extension sets with item no. 14311 and 14312. This makes it easy to build up parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operational reliability Quick setting up and taking down

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Curved Isolation Track R1 - 24°
Trix 14984 Scale N
Minitrix Curved Isolation Track R1 - 24°

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as you wish. The ideal track system for newcomers and professionals. Model Minitrix curved isolating track. R 1 - 24°. The click connection. Set up and taken down in no time. Stable and durable. Isolating gaps in both rails. The Minitrix track is the ideal track for quickly setting up a track formation on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a special stainless alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easily expanding your layout there are also various track extension sets with the item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operating reliability Quick to set up and take down

Selling price: CHF 5.10 RRP CHF 5.99

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Curved Isolation Track R2 - 24°
Trix 14986 Scale N
Minitrix Curved Isolation Track R2 - 24°

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as you wish. The ideal track system for newcomers and professionals. Model Minitrix curved isolating track R 2 - 24°. The click connection. Set up and taken down in no time. Stable and durable. Isolating gaps in both rails. The Minitrix track is the ideal track for quickly setting up a track formation on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a special stainless alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easily expanding your layout there are also various track extension sets with the item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operating reliability Quick to set up and take down

Selling price: CHF 5.10 RRP CHF 5.99

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track Length 104.2 mm / 4-1/8"
Trix 14990 Scale N
Minitrix Straight Track Length 104.2 mm / 4-1/8"

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as you wish. The ideal track system for newcomers and professionals. Model Minitrix straight track with a length of 104.2 mm (with interference suppression). The click connection. Set up and taken down in no time. Stable and durable. The Minitrix track is the ideal track for quickly setting up a track formation on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a special stainless alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easily expanding your layout there are also various track extension sets with the item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operating reliability Quick to set up and take down

Selling price: CHF 5.10 RRP CHF 5.99

In stock, shipped within 1-3 days

14% off the recommended price
Trix H0 Uncoupler Track Length 94.2 mm / 3-3/4"
Trix 62997 Scale H0
Trix H0 Uncoupler Track Length 94.2 mm / 3-3/4"

Prototype The Trix H0 uncoupler track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix H0 uncoupler track with a length of 94.2 mm. With a manual switch lever and a built-in electric drive. Suitable for the most important European coupler systems. Suitable for all couplers to NEM and for common close coupler systems. A lighting mast as an uncoupling signal (Märklin 74997) can be plugged in. Connection to a control panel or a digital decoder is possible. The click connection with the "Click". Assembled and dismantled in no time. Stable and durable. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Highlights Prototypical appearance. Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on carpet

Selling price: CHF 28.90 RRP CHF 33.99

In stock, shipped within 1-3 days

14% off the recommended price
LGB Straight Track 41 mm
LGB 10040 Scale G
LGB Straight Track 41 mm

Prototype With LGB garden railway tracks, you can easily bring more dynamism to your layout. Simply plug them together and off you go. LGB tracks are made of brass and are therefore very robust and weatherproof. Nothing stands in the way of long outdoor use! Model 41 mm long straight track for closing smaller gaps in the track. Highlights Extremely robust tracks that can withstand being stepped on Plastic sleepers with wood graining faithful to the original

Selling price: CHF 6.55 RRP CHF 7.69

In stock, shipped within 1-3 days

14% off the recommended price
LGB Straight Track 75 mm
LGB 10070 Scale G
LGB Straight Track 75 mm

Prototype With LGB garden railway tracks, you can easily bring more dynamism to your layout. Simply plug them together and off you go. LGB tracks are made of brass and are therefore very robust and weatherproof. Nothing stands in the way of long outdoor use! Model 75 mm long straight track. 1/4 as long as the LGB 10000 track. Highlights Extremely robust tracks that can withstand being stepped on Plastic sleepers with wood graining faithful to the original

Selling price: CHF 6.55 RRP CHF 7.69

In stock, shipped within 1-3 days

14% off the recommended price
Märklin Track End with a Bumper Length 77.5 mm + 5 mm / 3-1/16" + 3/16"
Märklin 24977 Scale H0
Märklin Track End with a Bumper Length 77.5 mm + 5 mm / 3-1/16" + 3/16"

Prototype The Märklin track end with a buffer stop combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and, with special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Märklin track end with a buffer stop with a length of 77.5 mm + 5 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Märklin H0 system: the Märklin track systems can be combined with one another at any time thanks to transition tracks. Reliable centre conductor operation and the common return on both rails are always retained and thus allow great track arrangements without complicated wiring (for example for reversing loops and track triangles). Perfect connection: the mechanical and electrical connection between two C tracks is not visible from the outside. The line thus looks as if it were made from a single length, just as on the prototype. Special fishplates are not required. Invisible strength: thanks to this stable click connection on the underside of the track, the geometry of the line can be maintained precisely without having to screw the tracks down. They can therefore be assembled at any time and quickly dismantled again. Anywhere! Versatile space: the ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Use our Gleisplanung planning software, item no. 60521, to plan your model railway Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Quick assembly and dismantling thanks to the stable click connection, even on carpet

Selling price: CHF 7.70 RRP CHF 8.99

In stock, shipped within 1-3 days

14% off the recommended price
Flex Track
Märklin 8594 Scale Z
Flex Track

Length 660 mm. Flexible track by cutting open the sleeper strip. Shorten the rails and sleeper strips and fit new fishplates (8954).

Selling price: CHF 11.90 RRP CHF 13.99

In stock, shipped within 1-3 days

13% off the recommended price
Track R9, 826,4mm,15°
Roco 42427 Scale H0
Track R9, 826,4mm,15°

Curved track R9. Radius 826.4 mm, arc angle 15°.

Selling price: CHF 3.30 RRP CHF 3.80

In stock, shipped within 1-3 days

11% off the recommended price
Turnout right Wr15
Roco 42443 Scale H0
Turnout right Wr15

Turnout right hand Wr15, without turnout mechanism. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°. An 8-mm spacer element (D8) is included for diagonal installation. Suitable turnout mechanisms: 40296, 40298 or 10030. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives

Selling price: CHF 25.90 RRP CHF 29.40

In stock, shipped within 1-3 days

14% off the recommended price
Trix H0 Right Turnout Length 188.3 mm / 7-3/8" / Curve 24.3° / Radius 437.5 mm / 17-1/4" (R2)
Trix 62612 Scale H0
Trix H0 Right Turnout Length 188.3 mm / 7-3/8" / Curve 24.3° / Radius 437.5 mm / 17-1/4" (R2)

Prototype The Trix H0 right-hand point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 right-hand point with a length of 188.3 mm / arc of 24.3° / radius of 437.5 mm (R2). With a manual control lever. Electric drive, point lanterns or point decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Ingenious point geometry: installation in all positions Compensation: no differing part-track combinations Grid: length of the point combinations 360 mm Trailing permitted: sprung metal point blades Hands off: electric drive can be retrofitted Indication follows: LED point lanterns can be retrofitted Good contact: metal common crossing can be polarised Digital technology: point decoder can be retrofitted

Selling price: CHF 22.95 RRP CHF 26.99

In stock, shipped within 1-3 days

14% off the recommended price
Trix H0 Right Wide Radius Turnout Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8"
Trix 62712 Scale H0
Trix H0 Right Wide Radius Turnout Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8"

Prototype The Trix H0 slim right-hand point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 slim right-hand point with a length of 236.1 mm / diverging track radius of 1114.6 mm. Point curve 12.1°. Polarisable 10° common crossing made of metal. 2 tracks 62071 are required at the end of the point, a matching ballast section is included. With a manual control lever. The 74491 electric drive, 74470/74471 point lantern and 74462 digital decoder can be retrofitted. With a length of 64.3 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet

Selling price: CHF 38.25 RRP CHF 44.99

In stock, shipped within 1-3 days

H0m flexible track, 1000 mm, pack of 20
BEMO 4280000 Scale H0m
H0m flexible track, 1000 mm, pack of 20

H0m flexible track, length 1000 mm. Supplied in a pack of 20.

Regular price: CHF 11.65

In stock, shipped within 1-3 days