Guide · the LGB garden railway
It all starts
under the tree.
Your first train today, a whole world to explore tomorrow. Six steps to grow your LGB starter set, at your own pace.

Six steps, at your own pace
Start simple, then choose what comes next. Nothing forces you to expand everything: each step stands on its own.
1. Getting startedUnpacked and on its way.See this step
2. The layoutFrom a circle to a small station.See this step
3. Completing the trainCoaches, wagons, another story.See this step
4. In the gardenThe train goes outdoors, the scenery comes to life.See this step
5. Swiss dreamsThe Graubünden train of your dreams.See this step
6. ControlRemote turnouts, then digital.See this step
Step 1 · The first departure
An LGB starter set has everything to run the same day: a locomotive, coaches or wagons, a complete circle or oval of track, the power supply and the train controller. There is something for every taste: a passenger train with sound and smoke, a freight train hauled by the “Stainz”, the construction train, the building-block train to fit out yourself, or the Christmas train with its two decorated coaches.
Track and train are made to run indoors and outdoors.
Lay the track on a flat surface, plug in, turn the controller: within minutes the train is running. If your locomotive smokes, half a chimney of fluid is enough for the plume.
LGB starter sets
This starter set contains a vintage train consisting of a tank locomotive and 2 coaches in a Christmas livery. The locomotive is equipped with a powerful motor as well as headlights and a smoke unit. The set also contains a complete circle of track, a power supply and a controller. Train length 85 cm.
In stock: 1 on the shelf, shipped within 1-3 days
Model This starter set contains a vintage train consisting of a tank locomotive and 2 coaches. The locomotive is equipped with a powerful motor as well as headlights, a sound module and a smoke unit. The set also contains a complete circle of track, a power supply and a controller. Train length 85 cm. Highlights Full steam ahead - With the LGB passenger train starter set you get everything you need for a successful entry into the world of the garden railway. The XXL railway experience for all generations. For indoors and outdoors - The tracks and the train are designed for all-weather use. Ideal for all model railway fans who also like to pursue their hobby in the fresh air. First-class equipment - With a steam module for real steam locomotive flair, a sound generator for the most realistic running sounds possible and LED lighting for breathtaking night runs. XXL contents supplied - Contains everything you need for a perfect start: 1x "Stainz" steam locomotive, 2x coaches, 1x controller incl. switched-mode power supply, 12x curved track (radius 600 mm, 30°, 377 cm total length), track clips, operating instructions. LGB quality since 1881 - As one of the world market leaders in the field of garden railways, LGB ensures outstanding quality, great spare parts availability and constant additions to the product range
On order, shipped within 10-15 days
The starter set for versatile play possibilities: a goods train with the "Stainz" steam locomotive, a ballast wagon and a loaded low-sided open wagon. The steam locomotive is equipped with a powerful motor and has an electronic steam locomotive sound and a smoke generator. The set also contains a complete circle of track (diameter 1,290 mm) as well as a power supply for 230 volts and a controller. The load shown on the low-sided open wagon is an example and may vary. Train length 85 cm.
On order, shipped within 10-15 days
Model This starter set contains a construction train consisting of a tank locomotive, a building block car and a tipping lorry car. The locomotive is equipped with a powerful motor and has an illuminated headlight. The locomotive and both cars can be decorated with the included stickers. The set also contains a complete circle of track, a power supply for 230 volts and a locomotive controller. Train length approx. 70 cm / 27-9/16". Highlights Locomotive with lighting Dump car can be loaded and unloaded Building block car for your own designs With a sticker sheet for creating two different sets of lettering Note An add-on set with another car, an excavator and construction site accessories is available under item number 49501.
In stock: 1 on the shelf, shipped within 1-3 days

Step 2 · From a circle to a small station
One more track, a turnout, and the first shunting begins. LGB offers two sets that extend the starter set's circle, each with its track plan:
Station track set 19902A right and a left turnout, nine straight and two curved tracks: the circle becomes an oval with a passing siding. Two trains can pass, or the locomotive can run round its train.See the set
Bumper track set 19901One turnout, six straight tracks, one curve and a bumper: an oval with a siding to shunt in.See the setThese are two options, not two required purchases. LGB track is also sold piece by piece, so you can draw your own plan.
Twelve 30° R1 curves make a full circle. The basic straight track is 300 mm long; the 600 mm track replaces two of them, the 150 mm track fills gaps.
Track and turnouts
With this set you can expand the circle of track from your LGB starter set into an oval with a passing loop. Two trains can then meet. Or you can park a train, shunt wagons and run the locomotive round from one end of the train to the other. The sturdy box contains: 1x 12000 right-hand manual point, 1x 12100 left-hand manual point, 9x 10000 straight tracks, 2x 11000 curved tracks.
On order, shipped within 10-15 days
With this set you can expand the circle of track from your LGB starter set into an oval with a siding for shunting. The sturdy box contains: 1x 12000 right-hand manual point, 6x 10000 straight tracks, 1x 11000 curved track, 1x buffer stop
On order, shipped within 10-15 days
Prototype With LGB garden railway tracks, you can bring more dynamism to your layout with ease. Simply plug them together and you are ready to go. LGB tracks are made of brass and are therefore very robust and weatherproof. Nothing stands in the way of long-term outdoor use! Model LGB points are sturdy and designed for years of outdoor operation. Straight track: 300 mm. Diverging track: right, R1, 30°. The drive mechanism can be mounted on the right or left. Can be retrofitted with the electric LGB point motor (LGB 12010). Highlights Extremely robust tracks that withstand being stepped on Plastic sleepers with prototypical wood grain
In stock: 1 on the shelf, shipped within 1-3 days
Prototype With LGB garden railway tracks, you can bring more dynamism to your layout with ease. Simply plug them together and you are ready to go. LGB tracks are made of brass and are therefore very robust and weatherproof. Nothing stands in the way of long-term outdoor use! Model The 600 mm long straight track is twice as long as the LGB 10000 straight track. Highlights Extremely robust tracks that withstand being stepped on Plastic sleepers with prototypical wood grain
In stock, shipped within 1-3 days

Step 3 · Completing the train
Coaches and wagons join the starter set's train, such as an RhB baggage car or high-side wagon. For the Christmas train, LGB releases a new Christmas car every year: the 2026 car is 30 cm long, with opening doors.
Then comes the wish for another story: a small industrial locomotive with two powered axles, 21 cm long, or the big Swiss locomotives of step 5.
Coaches, wagons and locomotives
Prototype Model of a two-axle baggage car of the RhB. Prototypical colour scheme and lettering for Era IV. Metal wheelsets, doors can be opened. Length over the buffers 44 cm. Highlights Metal disc wheelsets
In stock: 1 on the shelf, shipped within 1-3 days
Model Model of a two-axle RhB high-sided open wagon equipped with metal wheelsets, with the running number 8511, prototypically painted and lettered as it looked in Era VI. Length over the buffers 40 cm. Highlights New running number 8511
In stock: 1 on the shelf, shipped within 1-3 days
Model The 2026 Christmas car is elaborately printed with a beautiful Christmas motif. Doors can be opened, and it seamlessly complements the previous series of LGB Christmas cars. Metal disk wheel sets. Length over the buffers 30 cm / 11-13/16". Highlights Christmas car Beautifully designed motif Metal wheel sets
On order, shipped within 10-15 days
Model of a typical field railway locomotive, as was in use on many light and field railways and in some cases still is today in heritage operation. Both wheelsets are powered by a powerful motor. Many finely applied details, also in the cab. Length over the buffers 21 cm.
On order, shipped within 10-15 days

Step 4 · Your garden becomes your little world
The tree is put away, the passion is not. LGB track is made of brass, robust and weatherproof: the same train can run in the living room in winter and in the garden in summer. Outdoors there is room for wider curves, which give the trains a more generous line.
A house, a station, and everything comes to life
A crossing keeper's house by the track, a mountain chapel, an inn, a few figures: Faller's POLA G buildings and figures are made to the scale of LGB trains. They are not online yet: ask us, and we will order them for you from our importer.

POLA G 330877 crossing keeper's house

POLA G 330908 covered platform
A track laid for the season is enough to start, and track clips keep the rails firmly together. The layout then grows with the garden.
To bring the garden to life
Is your model railway supposed to cross a large gorge? Or do you want to build an interesting eye-catcher into your layout? This impressive model, 1,200 mm long and 300 mm high, is available for just that. The clearance height is 224 mm. The kit consists of seven parts that can be assembled in a few minutes. You only need a screwdriver. Two abutments are included, which makes installation easier on all LGB layouts. For use with the LGB bridge blocks (LGB 50611-50614). Prepared for use with the LGB 56402 standard catenary.
On order, shipped within 10-15 days
The level crossing barrier can easily be installed in any straight LGB track. The weight of the approaching train closes the barrier arms. The barrier opens when the last wagon has passed the level crossing.
On order, shipped within 10-15 days
The Rhaetian Railway uses colour light signals, which take up less space along its narrow mountain lines. The electrically operated LGB signal is equipped with signal lamps that change from red to green and are mounted on a prototypical signal mast. With an LGB signal drive. Easy assembly and wiring. For use with the LGB 51755 or similar. Height: 240 mm.
On order, shipped within 10-15 days

Step 5 · The train you dreamed of
Picture it: a Graubünden train pulling into the station, pantographs raised, travellers waiting on the platform. LGB models Switzerland's mountain railways at 1:22.5, from the small RhB Ge 2/4, whose prototype entered service in 1913, to the elegant cars of the Alpine Classic Pullman Express, such as this saloon car.
Swiss inspiration
Prototype As early as 1913 the RhB procured 7 units of the small class Ge 2/4 electric locomotive. The locomotive was, so to speak, half a Ge 4/6 as far as the drive and the electrical equipment were concerned. The locomotives, 8.70 m long and weighing 37 tonnes, had a power of 210 kW (285 PS) and reached a maximum speed of 45 km/h. The locomotives could not quite meet the demands placed on them; problems arose again and again, above all in the area of the electrical system. Between 1943 and 1946, 3 machines were converted into shunting locomotives with a central cab and were given the running numbers 211–213. Two further locomotives were fundamentally modernised: they received a new traction motor and an additional rheostatic brake – one pantograph was removed to make room for its brake resistors – so that these two locomotives, with the numbers 221 and 222, developed almost twice the power of the original version, namely 428 kW or 582 PS. At the same time the weight fell to 30 t, while the maximum speed rose to 55 km/h. In 1998 the 221 was scrapped; the 222 is still in use as a heritage locomotive and can be encountered on the entire core network of the RhB on special runs. Model Model of the Ge 2/4 electric locomotive with the number 222 of the RhB in the version in which it still exists today as a historic locomotive. Roof with one pantograph and rheostatic brake; the pantograph has a drive and can be raised and lowered in digital operation. It has prototypical paintwork and lettering for Era VI. Both driving wheelsets are powered by a powerful ball-bearing motor, and the locomotive has traction tyres. It is equipped with an mfx/DCC decoder with many sound and light functions, such as headlights that change over with the direction of travel, cab lighting, and much more. Length over the buffers 38 cm. Highlights Powerful ball-bearing motor. mfx/DCC digital decoder Pantograph can be raised and lowered in digital operation Colour scheme and lettering for Era VI. Many prototypical details. With energy storage
- Digital
In stock: 1 on the shelf, shipped within 1-3 days
As early as 1900, the RhB began thinking about electrifying its lines. Since electric operation was still in its infancy at the time, the planned line from Bever to Scuol in the Engadine was designated as a test line. Several locomotives of the Ge 4/6 class were therefore ordered and delivered between 1912 and 1914. Above all, locomotives 351 to 355 delivered by SLM and MFO proved very successful and, with their output of 560 kW and top speed of 55 km/h, were equal to every demand. Originally painted green, the locomotives were repainted between 1920 and 1923 in the brown that is still usual today for the older locomotives. The locomotives were actually supposed to be retired after the Ge 4/4 I were delivered, but this was not possible because of the growth in traffic in the 1950s and 1960s. Some of the locomotives were therefore modernized and remained in service into the 1970s; the last one retired was the 353 – which is still in operating condition today as a historic locomotive. Highlights Two powerful motors. mfx/DCC digital decoder. Pantographs can be raised and lowered in digital operation. Color scheme and lettering for Era VI. Many prototypical details. Product description Model of the RhB Ge 4/6 electric locomotive with the number 353 as it still exists today as a historic locomotive. Two powered scissors pantographs that can be raised and lowered in digital operation. Prototypical paint and lettering for Era VI. All 4 driving axles are powered by two powerful motors, traction tires. Equipped with an mfx/DCC decoder with many sound and light functions, such as headlights that change over with the direction of travel, cab lighting and much more. Length over buffers 50 cm. completely new tooling
In stock: 1 on the shelf, shipped within 1-3 days
Prototype The HGe 4/4 II is a narrow-gauge electric locomotive for rack and adhesion operation. A first series of 5 locomotives was procured from 1985 by the Furka-Oberalp Railway and the SBB for the narrow-gauge Brünig line. With a power of 1.932 kW – that corresponds to around 2.600 PS – and a maximum speed of 100 km/ and 40 km/h respectively on rack sections, these locomotives set new standards. Since the locomotives proved themselves very well, more were procured from 1990, so that in the end the SBB and the FO each had 8 and the Brig-Visp-Zermatt Railway 5 units in their fleets. These locomotives are still in use today: at the Matterhorn Gotthard Railway those of the former FO and BVZ, at the Zentralbahn those of the former SBB Brünig line. Outstanding is the hauling of the Glacier Express trains at the MGB between Zermatt and Disentis, as well as the car shuttle trains at the Furka Tunnel between Oberwald and Realp. In recent years the MGB has begun to renew the locomotives thoroughly; besides new electronics, the headlights in LED technology as well as the new paint scheme are chiefly recognisable from the outside. These locomotives will thus be in use in the Swiss mountains for many years to come. MGB locomotive no. 3 "DOM" has received employee-recruitment advertising that differs on each side, which makes the machine a real eye-catcher. Model Model of the electric locomotive no. 3 "DOM" (class HGe 4/4 II) of the Matterhorn Gotthard Railway (MGB), as it is still in use today. It has a prototypical colour scheme and lettering according to Era VI. Special paint scheme with two different employee-recruitment advertisements on the side walls of the machine. All 4 wheelsets and two traction gears are powered by two powerful ball-bearing motors. The locomotive is equipped with an mfx/DCC decoder with many light and sound functions. The roof pantographs are motor-driven and can be controlled digitally. Length over the buffers 67 cm. Highlights 2 differently and elaborately designed side walls. 2 ball-bearing motors Real rack drive Digitally controlled pantograph drives Note Real rack operation is possible with the LGB 10210 rack and the accompanying 10220 rack holders. The maximum gradient in rack operation is 12%.
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Model of the As 1161 salon car of the RhB. Prototypical Era VI paint scheme and lettering, as the car is still used today in the Alpine Classic Pullman Express. Many applied details, doors can be opened. Complete, finely detailed interior. Interior lighting installed at the factory. Metal wheel sets. Length over the buffers 66 cm / 26". Matches the Alpine Classic Pullman cars 36658 and 36659.
In stock: 1 on the shelf, shipped within 1-3 days

Step 6 · You give the signal to depart
A turnout motor fits easily on every LGB turnout, and a control box switches up to four of them from the edge of the layout. For an automatic shuttle between two stations, the shuttle controller stops the train, then starts it again in the other direction.
Later, digital control opens up new scenarios: with a Central Station 3, each locomotive fitted with a decoder is controlled on its own, with its lights and sounds. We are happy to advise you when you take the step.
Control and electronics
The electric point motor can be fitted very easily to all LGB points. Together with the LGB auxiliary switch (LGB 12070) and other LGB components, you can even control your trains automatically. The LGB control panel (LGB 51755) is suitable for switching the points. 88 x 42 x 19 mm.
In stock: 3 on the shelf, shipped within 1-3 days
With the control panel you can operate up to four LGB points, signals, uncoupler tracks, or other accessories. Each momentary rocker switch operates one accessory item. The control panel is connected by means of the terminals on the back to an AC power source (18 V). When using a switched-mode power supply (51090 or 51985), the 60130 Converter is also required. An LED indicates whether the control panel is being supplied with power. Colour-coded terminals on the back make the connections easier. With stickers for marking the switch assignments. 126 x 116 x 66 mm. Replaces the 51750 item.
In stock: 1 on the shelf, shipped within 1-3 days
With the automatic shuttle unit, you can have a train shuttle back and forth between two stations. An electronic circuit stops the train at the station and then lets it run back again. Easy to install, with an adjustable dwell time and prototypical gentle starting and braking. For connection to 10-24 V DC. The 10345 is the technically optimised and improved successor to the 10340.
On order, shipped within 10-15 days
With this point decoder, the control commands for one LGB solenoid accessory can be transmitted easily via the tracks. Power is drawn directly from the track, which avoids long, complicated wiring. This point decoder is thus ideal for controlling points and signals out on the line or at more distant locations on your LGB layout. Suitable for the CS 2 and CS 3 as well as MZS III. The DCC, mfx and MM formats are supported.
In stock: 2 on the shelf, shipped within 1-3 days
Your layout, through the seasons
A train under the tree soon becomes a story told all year round.

A tradition to come back to
Every winter

A world that grows
Through the seasons

A passion to share
Simply
Your layout, your story
Give your line a name, photograph its best moments and set the train up again under the tree every winter.
Your space, your wishes, your budget: let's talk about your project, in writing or in the shop.
Ask for advice Our shop in Rolle
The Swiss Hobby team
Model railways · Rolle
Scene photos: LGB / Märklin, POLA G / Faller. The manufacturer's instructions apply to installation, use and safety. Prices and availability: on each product page.

