Electronics
For the 4085 and 4087 coaches. Consisting of the 7198 power feed, a lighting strip, 2 lamp sockets, and 2 light bulbs.
In stock: 1 on the shelf, shipped within 1-3 days
For the 42168, 42171, 4227, 4255-4257, 42551-42571, 4264, 4265, 4282, 4285, 4286, 4327, 4368, 4369, and 4384 coaches. Consisting of a power feed, a lighting strip with lamp sockets, and 2 light bulbs. Can be used with the 7319 current-conducting coupler.
In stock: 1 on the shelf, shipped within 1-3 days
Ideal addition to the 74924 fully automatic level crossing for C tracks. Required for every additional parallel track. Contact track set: 3 straight tracks, each 94.2 mm. No additional connections are required. Road section adjustable from 26 to 61 mm (track spacing from 66 to 101 millimetres).
In stock: 1 on the shelf, shipped within 1-3 days
The eMOTION XLS has been one of the most popular large-scale sound decoders since its introduction in 2006, thanks to continuous development. With 18 robust screw terminals, the XLS can be used universally. Components such as clock generators, reed contacts, speakers, buffer connections, SUSI, etc., can be practically plugged in once the decoder is installed. With a motor output stage power of up to 3.5 amperes, it is ideally suited for two-motor locomotive models for both digital and analogue operation.
In stock: 1 on the shelf, shipped within 1-3 days
Rotate until you have a "rotation worm" micro-motion Children’s Playground The NOCH “micro-motion Roundabout” is excellent for recreating a lifelike children’s playground and putting it in the spotlight. The children's roundabout among the playground equipment on a playground really love all children. With all their might, they spin the top in the middle to get a fast speed. But watch out... proper holding on to the edge is very important to avoid bad accidents. If you close your eyes you feel the spins even more intensely and you feel like you can fly. In addition to the children's swing, the bird's nest swing, a slide and the sandbox, the children's roundabout should not be missing from any playground. This is where you can see who really has power and can really get the carousel going. Happy and swaying from the strong turns, the children get off after a wild ride on the roundabout and must first get out of the spinning worm again. Fun for young and old is pre-programmed here and wild rides make children's eyes light up. Note:A suitable special glue is included in the kit. 5 cm x 5 cm x 5.4 cm, installation depth 3.5 cm
In stock: 1 on the shelf, shipped within 1-3 days
Hier werden Erinnerungen an die Kindheit wach micro motion Baum mit Schaukel Spur H0 Es ist Sommer, ein wunderschöner Tag mit viel Sonnenschein geht zu Ende. Während Mama das Abendessen zubereitet, schaukelt die kleine Tochter begeistert auf der Schaukel, die Papa zu Ostern an ihrem Lieblingsbaum aufgehängt hat. So oder ähnlich könnte die Szene aussehen, in der unser "micro motion Baum mit Schaukel" zum Einsatz kommt. Der Baum mit Schaukel ist ein faszinierendes mirco-motion Produkt und weckt wunderschöne Kindheitserinnerungen. Am untersten Ast der mächtigen Eiche schwingt eine Schaukel, auf der ein kleines Mädchen sitzt. Der Baum mit Schaukel wird montagefertig geliefert. Der Antrieb besteht aus einem Motor und einem Getriebe und befindet sich unter dem Baum (Aufbauhöhe ca. 33 mm). Die mitgelieferte Elektronik wird an einen üblichen 16V Modellbahntrafo angeschlossen und ist für Gleich- und Wechselstrom geeignet. Die Geschwindigkeit der Schaukelbewegung kann auf der Platine eingestellt werden.
In stock: 1 on the shelf, shipped within 1-3 days
Childhood Memories Are Awakened! N Gauge micro-motion Tree with Swing It’s summer and a beautiful sunshiny day is coming to an end. While Mum prepares dinner, the little daughter swings enthusiastically on the swing, which Dad hung on her favourite tree for Easter. The scene in which our Tree with Swing is called into action could look something like this. It is a fascinating micro-motion product that awakens wonderful childhood memories. The bottommost branch of the mighty oak holds a swing, on which a little girl is sitting. The Tree with Swing is supplied ready for installation. The drive consists of a motor and a gearbox and is located under the tree (mounting height approx. 35 mm). The electronics supplied can be connected to a standard 16 V model railway transformer and are suitable for AC and DC. The speed of the swinging movement can be set on the circuit board. Total height 17.5 cm, Height of tree 15 cm, Installation depth drive 2.5 cm
In stock: 1 on the shelf, shipped within 1-3 days
Item no.: 56202
In stock: 1 on the shelf, shipped within 1-3 days
The container doors cannot be opened.
In stock: 1 on the shelf, shipped within 1-3 days
Change-over button for four solenoid-operated articles (turnouts, signals, relays) without automatic end-position switch-off. Without feedback.
In stock: 1 on the shelf, shipped within 1-3 days
Changeover switch. The switch is used wherever alternating switch-on connections are necessary (Lighting, Separate track sections). It is connected via the connector zone. Each individual switch is designed for maximum permissible current of 0.5 A.
In stock: 1 on the shelf, shipped within 1-3 days
Connecting cable for switches 10520, 10525, 10526 as track connecting cable for Digital amplifier 10764 and Digital booster 10765. Length 1.20 m
In stock: 1 on the shelf, shipped within 1-3 days
Power distributor. Necessary for connecting var. accessories (turnouts, light, signals, etc.) to the new transformers/switching power supplys. Input is a coaxial socket, outputs – via a luster terminal and four 3-pole connector zones (to our existing connection system 10603) and via a fixed cable with a coaxial connector to the control device or the digital device.
In stock: 1 on the shelf, shipped within 1-3 days
CAN Bus cable. For connecting Z21 CAN devices.
In stock: 1 on the shelf, shipped within 1-3 days
Booster connection cable. Spare cable for connecting boosters (10765, 10789, 10805, 10806, 10807) with: Digital amplifier (10764) Digital central power unit (10820, 10822, z21) Break generator (10779) Connecting the boosters mentioned above with each
In stock: 1 on the shelf, shipped within 1-3 days
This device allows to operate track pieces such as terminal loops, triangular junctions and turntables even with the internationally standardised two-track - provided that it works on DCC-digital. Please note that the terminal loop module is designed exclusively for digital operation and does not work in analogue mode. The terminal loop function can be activated by: Closed circuit Make-and-break contacts replacement: 10797
In stock: 1 on the shelf, shipped within 1-3 days
Control unit with many operation functions. Several Z21 WLANMAUS can be simultaneously operated – possible with all Z21 systems (z21 start combined with WiFi Package) or if your own router is available with Art. no. 10818 – z21 activation code. The Z21 WLANMAUS gives you wireless freedom around your layout. Wireless freedom, 31 functions per locomotive (including headlights) Control of up to 9999 locomotives and 2048 turnouts 100 locomotive addresses can be stored in the database and can be assigned with names (up to 10 digits) Locomotive control with 14, 28 or 128 speed steps Writing and reading of CV values 1–1024 on your locomotive decoder Display with adjustable brightness Controller with center position Operated with commercially available standard batteries (3 x AAA, not included in the delivery) 5 SSID passwords: current password + the 4 last passwords 10 sets of points with 10-character names and 10 points each Firmware updateable Contents: Z21 WLANMAUS Manual
In stock: 1 on the shelf, shipped within 1-3 days
Unlock Code z21 The z21 activation code is required if you already have your own router. You can then use all the functions (see item no. 10814) of the z21 start including the start sets. Please note that extended network knowledge is necessary for this purpose. Follow this Link for Code activation Click HERE for more information! Info: system requirement is a Windows PC or notebook as well as an existing Internet connection. Please also note our video: Activation of the z21 start with the z21 WLAN package Please note that the unlock code cannot be delivered by e-mail!
In stock: 1 on the shelf, shipped within 1-3 days
Z21 pro LINK The configuring and networking of your Z21 hardware is getting even simpler and more convenient. In addition the Z21 pro Link also stands out thanks to easy operation and the ability to keep up to date with updates. Configuration and networking of your Z21 components at a new level: No complex CV tables With integrated web server Installed WiFi The 3 essential functions 1. Configuring The Z21 pro LINK always automatically detects which device it is currently connected to. You can conveniently configure this device via the installed display and buttons without the need of any other components. Or you carry out the necessary adjustments via the Z21 pro LINK website on your PC or smartphone. Thus you benefit from the larger screen. 2. Updating Always keep your Z21 system up to date and benefit permanently from all new functions. You can perform this easily with the Z21 Updater App for iOS and Android or via PC with the Z21 Maintenance Tool. 3. Controlling The Z21 pro LINK also networks all of your devices with zLink interface. It enables to perform communication with control commands and status queries directly via WiFi. Therewith the "Internet of Moba Things" has become reality. Package Contents: Z21 per LINK Z21 zLink cable
In stock: 1 on the shelf, shipped within 1-3 days
LED interior lighting for H0 coaches. The light strip works with many different model railways, regardless of whether you are an analogue railroader (DC or AC) or run digitally (DCC/Motorola II). The integrated multi-protocol decoder enables special lighting effects and additional functions. Automatic detection and switching of operating modes Brightness adjustment optionally with potentiometer or CV setting Integrated constant current source for constant brightness from approx. 7 volts 8 integrated LEDs (warm white), 2 connections for additional LEDs Maximum driving voltage in digital mode: 21 volts Dimensions: 279.5 x 8 x 3.38 mm; can be shortened to 91 mm
In stock: 1 on the shelf, shipped within 1-3 days
Retrofit kit for interior lighting and headlights Interior lighting retrofit set and headlights (bulb) with direction of travel dependent light change for control cab coaches 44942/44959, (1:100). Replacement bulbs 16 volt: art. no. 93728 and art. no. 93517.
In stock: 1 on the shelf, shipped within 1-3 days
2-pole connecting cable with mounted rail clips for ROCO LINE tracks. Only suitable for intermediate feeds due to insufficient cable cross-section. Cannot be used as the main connection of the model railway system!
In stock: 1 on the shelf, shipped within 1-3 days
Feed-in power element for analogue DC operation. It can be connected to any straight or curved track element at the point designated from the factory. Not suitable for digital operation.
In stock: 1 on the shelf, shipped within 1-3 days
Turnout decoder geoLine. Suitable for the turnout drive 61195 of the geoLine track system. Accessible via turnout addresses 1 to 1024. Decoder characteristics can be changed via CVs. Easy assembling Simple operation Safeguarded against overheating and short-circuit fault NOTE: No longer accessible via locomotive addresses!
In stock: 1 on the shelf, shipped within 1-3 days