Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Electronics

Command stations, decoders, boosters and wiring for digital control, whatever your system.
Filter products
13% off the recommended price
Trix Locomotive Controller with a 230 Volt Power Supply
Trix 66508 Scale H0
Trix Locomotive Controller with a 230 Volt Power Supply

Controller with a 230 V / 18 VA switched-mode power supply. Four-stage speed control for a slow start and a powerful increase in speed up to maximum speed. Single-knob operation for setting the track voltage and for determining the direction of travel by turning the control knob out of the centre position. Dimensions of the controller: 130 mm (L) x 70 mm (W) x 50 mm (H).

Selling price: CHF 82.00 RRP CHF 94.99

In stock: 1 on the shelf, shipped within 1-3 days

Interior Lighting for AC
Trix T66672
Interior Lighting for AC

Interior lighting for the Märklin Bavarian and Palatinate express train passenger cars 41354, 41358, 41359, 41369 and 41379.

Selling price: CHF 26.95 RRP CHF 27.99

In stock: 1 on the shelf, shipped within 1-3 days

Locomotive decoder 2000 mA for NEM interface
Trix 66837
Locomotive decoder 2000 mA for NEM interface

Decoder for all DC locomotives with a current consumption of up to 2000 mA (motor 2000 mA, lighting 300 mA). Suitable for digital locomotives with an 8-pin digital interface to NEM. Universally usable in Selectrix and DCC format. Automatic system and analogue detection. Same locomotive address in Selectrix and DCC operation. 7 adjustable maximum speeds. 4 adjustable motor pulse variants. Automatic load compensation. Connection for lighting function. Connection for additional function. 4-pin SUSI interface for further special functions in DCC operation. Short-circuit protection of the motor output. Overload protection of the lighting output. Overload protection of the additional function. Programming of additional settings by selecting address "00", e.g. fine graduation of the pulse widths (control variant), polarity reversal of the direction of travel in Selectrix operation: 31 speed steps. 111 addresses. Block section operation with simple diodes (1 or 2 stopping sections). Braking mode with brake diode. in DCC operation: Manual speed step selection 14/28 steps. Automatic switchover to 128 speed steps. Addresses optionally 7-bit or 14-bit. Braking mode with DC voltage and "broadcast-mode" braking generators Dimensions approx. 24.2 x 15.4 x 3.9 mm.

Regular price: CHF 10.00

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
LocoNet cable tester
Uhlenbrock 62000
LocoNet cable tester

LocoNet cable tester – the quick way to error-free LocoNet wiring. With this tool, you can quickly and easily check your LocoNet wiring before and after installation: detection of short circuits, continuity test, twisted or untwisted LocoNet cable, test of single and multiple cables. The tester consists of the main unit (Master) with an on/off switch for fast or slow test sequence and a detachable accessory unit (Remote); the LED chains 1 to 6 of both units show the test result as a running light. Contents supplied: LocoNet cable tester, protective case, 9-V block battery, 3 m LocoNet spiral cable, LocoNet coupling, operating instructions.

Selling price: CHF 30.90 RRP CHF 34.60

In stock: 1 on the shelf, shipped within 1-3 days

Mfx module
Uhlenbrock 65110
Mfx module

With the new mfx module, your Intellibox II also communicates with the mfx® vehicles on your layout. Through automatic registration, the vehicles are entered into the Intellibox II database with their names and associated special function symbols, so that they can be selected and operated immediately with full convenience. You can now reach directly

Selling price: CHF 96.90 RRP CHF 107.60

In stock: 1 on the shelf, shipped within 1-3 days

11% off the recommended price
SD 1 function decoder
Uhlenbrock 67500
SD 1 function decoder

Free address setting without decoder presets Points and signals with a solenoid drive that are to be controlled digitally must be fitted with a solenoid accessory decoder. Lamps, colour-light signals or track sections that are to be switched on and off digitally are digitalised with a switching decoder. Uhlenbrock solenoid accessory and switching decoders can be used in Märklin, Motorola and DCC digital systems. In Motorola mode, addresses 1–320 can be addressed with the Intellibox, and addresses 1–256 with other command stations. In DCC mode, addresses 1–2048 are possible. The addresses are not preset. They can be freely chosen independently of one another. Each module has two outputs. Depending on the type, both outputs can be addressed together under one address or independently of one another under two addresses. The relay contacts of the switching decoders have potential-free outputs and can be connected as required. Each output can carry a load of 1 A. By limiting the connections to two per module, cable runs stay short and the wiring of the layout stays clear. Connection is conveniently made via screw terminals. Setting the address is extremely simple. First the decoder's programming button and then the corresponding point button on the control panel are pressed. The decoder simply remembers the corresponding address. The decoders are supplied with operating voltage and control information from the digital command station. Universal switching decoder with two separate, potential-free changeover contacts that can be addressed together under one address. One contact can, for example, operate a colour-light signal and the second can switch the track voltage. Art. no. 67500 SD1 switching decoder

Selling price: CHF 31.90 RRP CHF 35.90

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
SD 2 function decoder
Uhlenbrock 67600
SD 2 function decoder

Points and signals with a solenoid drive that are to be controlled digitally must be fitted with a solenoid accessory decoder. Lamps, colour-light signals or track sections that are to be switched on and off digitally are digitalised with a switching decoder. For Motorola and DCC digital systems Depending on the type, for pulsed or continuous current Large address range Free choice of address Address setting at the push of a button Relay contacts with potential-free outputs High load: 1 A per output Simple connection Size: 38 x 32 x 15 mm Uhlenbrock solenoid accessory and switching decoders can be used in Märklin, Motorola and DCC digital systems. In Motorola mode, addresses 1–320 can be addressed with the Intellibox, and addresses 1–256 with other command stations. In DCC mode, addresses 1–2048 are possible. The addresses are not preset. They can be freely chosen independently of one another. Each module has two outputs. Depending on the type, both outputs can be addressed together under one address or independently of one another under two addresses. The relay contacts of the switching decoders have potential-free outputs and can be connected as required. Each output can carry a load of 1 A. By limiting the connections to two per module, cable runs stay short and the wiring of the layout stays clear. Connection is conveniently made via screw terminals. Setting the address is extremely simple. First the decoder's programming button and then the corresponding point button on the control panel are pressed. The decoder simply remembers the corresponding address. The decoders are supplied with operating voltage and control information from the digital command station. Universal switching decoder with two potential-free changeover contacts that can be addressed independently of one another under two addresses. The decoder switches two different loads independently of one another, for example lamps or motorised point drives. Art. no. 67600 SD2 switching decoder

Selling price: CHF 33.90 RRP CHF 38.00

In stock: 1 on the shelf, shipped within 1-3 days

MARCo receiver and detector
Uhlenbrock 68510
MARCo receiver and detector

MARCo receiver + feedback module RailCom® automation + genuine feedback Now not only vehicles equipped with a RailCom® transmitter can be detected, but all other vehicles as well. The MARCo receiver contains two RailCom® detectors and two feedback modules for monitoring two track sections. In addition, it has an intelligence that can carry out switching operations independently. The connection to the digital command station is made via LocoNet. If simple switching functions are to be carried out independently of the direction of travel, one module can monitor two track sections. Only the address of the passing locomotive is transmitted and simple switching tasks are carried out. At locations where an automatic function dependent on the direction of travel is to be carried out, the two track sections of one detector are installed one behind the other in the track. In this way, the direction of travel is detected in addition to the address, and the automation can stop the train precisely in the second section.

Selling price: CHF 53.90 RRP CHF 59.70

In stock: 1 on the shelf, shipped within 1-3 days

ID2 N-TT decoder, 6-pole
Uhlenbrock 73310
ID2 N-TT decoder, 6-pole

The standard decoders for small gauges are the 73xxx series. These decoders are available with connecting wires (73300), with 6-pin plug to NEM 651 (73310) and with PluX12 interface (73340). This can be used, for example, to equip Tillig locomotives. The highlight is the 73236 decoder for locomotives with the Next18 interface. It is even fitted with the Intellimatic. Our new 73406 decoders with connecting wires and 73416 with 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plugging in of a sound module, the decoders are fitted with a SUSI or microSUSI interface. On the Next18 decoder, the SUSI connections are found on the connector strip. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, an extremely small decoder-sound combination results. Art. no. 73310 Decoder, microSUSI, Multi, DC, control, wire

Selling price: CHF 27.90 RRP CHF 30.60

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
AnDi, motor, AC
Uhlenbrock 75000
AnDi, motor, AC

The digital decoder is the brain of your locomotive. It determines the running characteristics and switching options. A poorly chosen decoder can quickly spoil your enjoyment of the vehicle. IntelliDrive decoders are at the forefront of technology and guarantee you optimal running characteristics.

Selling price: CHF 22.90 RRP CHF 25.50

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Spare bulb clear T 3/4, Ø 2,3 mm, 12 V, 50 mA, 2 cables, 2 pieces
Viessmann 3503
Spare bulb clear T 3/4, Ø 2,3 mm, 12 V, 50 mA, 2 cables, 2 pieces

Coloured spare bulbs. All lamps are long life quality.

Selling price: CHF 9.00 RRP CHF 10.00

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Blaze flickering
Viessmann 5021
Blaze flickering

The blaze flickering generates a realistic fire effect of a blazing fire. Up to 7 red and yellow miniature bulbs all flicker in a different rhythm, suggesting to the observer the striking effect of a real burning fire. The intensity can be adjusted steplessly to suit the specific application and your own desire. The following applications are possible: Burning houses, camp fires (in the forest, by the lake), stoves etc. The set includes 2 yellow and 1 red bulbs. It is possible to upgrade to 7 bulbs items 3501 (yellow), 3502 (red) and 3503 (clear). Useable with camp fire item 5022.

Selling price: CHF 50.90 RRP CHF 56.80

In stock: 1 on the shelf, shipped within 1-3 days

H0 Quadruple blinker electronics
Viessmann 5030 Scale H0
H0 Quadruple blinker electronics

The blinker electronics is used to equip the model train vehicles with very realistic flashlights. A special blink switching, which is mounted under the layout, provides real effective rotating flashlight. All 4 connectable spare bulbs are blinking separately. Operation allowed only with AC voltage. Spare bulbs: Items 3500 - 3503.

Selling price: CHF 27.90 RRP CHF 30.60

In stock: 1 on the shelf, shipped within 1-3 days

H0 Taxi sign with LED lighting
Viessmann 5039 Scale H0
H0 Taxi sign with LED lighting

Subsequent mounting in existing vehicle models. Maintenance free by LED lighting.

Selling price: CHF 14.90 RRP CHF 16.20

In stock: 1 on the shelf, shipped within 1-3 days

TT Coach lighting, 8 LEDs warm-white
Viessmann 50505 Scale TT
TT Coach lighting, 8 LEDs warm-white

The circuit board with high intensity, power-saving and maintenance free LEDs can be shortened and divided variously. Lighting intensity adjustable by a potentiometer. Additionally included are two soldering pads to connect rear lights. The supplied sitting figurines bring some life into the passenger cars. Can be used in any coach of all manufacturers designed to be equipped with lighting. The circuit is to be fixed under the waggon roof and can be adjusted to any waggon length by cutting. Flicker-protection and constant current source for steady brightness integrated. Current supply either by the sliding contactor/wheel-rail contactors of the waggon or by our current-carrying couplings. Suitable for DC, AC or digital supply voltage. Max. power input approx. 22 mA. Dimensions: L 0,7 x W 21,1 cm.

Selling price: CHF 14.90 RRP CHF 16.50

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
H0 St. Andrew's crosses, 2 pieces
Viessmann 5058 Scale H0
H0 St. Andrew's crosses, 2 pieces

Set with 2 St. Andrew's crosses without blinker electronics. Maintenance free by LED lighting. Suitable blinker electronics item 5065. Height: 3,6 cm.

Selling price: CHF 21.90 RRP CHF 24.40

In stock: 1 on the shelf, shipped within 1-3 days

H0 St. Andrew's crosses with blinker electronics, 2 pieces
Viessmann 5060 Scale H0
H0 St. Andrew's crosses with blinker electronics, 2 pieces

Set with 2 St. Andrew's crosses with blinker electronics item 5065. Maintenance free by LED lighting. For automatic operation electronic relay item 5552 and switching tracks resp. switching contact item 6840 are required. Height: 3,6 cm.

Selling price: CHF 40.90 RRP CHF 45.00

In stock: 1 on the shelf, shipped within 1-3 days

H0 Coach lighting, 11 LEDs warm-white, with function decoder
Viessmann 5077 Scale H0
H0 Coach lighting, 11 LEDs warm-white, with function decoder

Coach lighting with maintenance free, power-saving, bright LEDs with integrated multi protocol decoder (Motorola/DCC). Brightness adjustable by CVs and potentiometer. Can be used in any coach of all manufacturers designed to be equipped with lighting. By shortening the circuit board, it can be adapted to various waggon lengths. Integrated flickering protection for constant light even with short interruptions of the voltage supply, additional capacitors/power packs can be connected. Various lighting effects are adjustable, as start-up simulation of track bed inverter or single flickering tubes. The model offers direction depending switching outputs for front- and rear lighting. An additional switching output up to 150 mA capacity completes the functionalities. Power supply by grinder/point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Due to low-loss switching regulator the coach lighting warms up only a bit. Maximum power input 20 mA. Dimensions: L 25,4 x W 0,8 cm.

Selling price: CHF 29.90 RRP CHF 33.20

In stock: 1 on the shelf, shipped within 1-3 days

H0 DB Ticket machine with LED lighting
Viessmann 5084 Scale H0
H0 DB Ticket machine with LED lighting

Draw a railway ticket prior to departure! With high quality pad printing. L 0.6 x W 1 x H 2.4 cm

Selling price: CHF 27.90 RRP CHF 30.60

In stock: 1 on the shelf, shipped within 1-3 days

11% off the recommended price
LED light strips 2,3 mm wide with 66 LEDs white
Viessmann 5089
LED light strips 2,3 mm wide with 66 LEDs white

These LED light strips are suitable for stationary lighting. They consist of flexible material and are coated on their backs with adhesive tape. Thus they can easily be mounted even in bent condition. The LED strips are intended to be used with power modules 5215, 5225 or 5205 or with DC voltages of 18V or higher. The enclosed resistors allow for brightness adjustment.The max. contact load per segment is 25 mA, the load for the total strip must not exceed 190 mA. Operating voltage with serial resistor: 24V =. Incl. connection cable. The light strip equipped with 66 LEDs consists of 11 separable segments and has a total length of approx. 175 mm. Each segment is approx. 15.4 mm long and has 6 white LEDs (4000K). The segments are connected in parallel.

Selling price: CHF 18.90 RRP CHF 21.30

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
H0, TT, N Coach lighting, 8 LEDs white
Viessmann 5090 Scale H0
H0, TT, N Coach lighting, 8 LEDs white

The circuit board with 8 white, maintenance free LEDs can be shortened. Constant power supply integrated, prepared for flicker-protection. Uniform illumination by small LED distance can be used in any coach of all manufacturers designed to be equipped with lighting. Suitable for DC, AC or digital power. Maximum power input 30 mA. Dimensions: L 13,2 x W 0,9 cm.

Selling price: CHF 13.90 RRP CHF 15.60

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
H0 Arc traffic light with pedestrian signal and LEDs, 2 pieces
Viessmann 5094 Scale H0
H0 Arc traffic light with pedestrian signal and LEDs, 2 pieces

Traffic lights suitable for epochs III - VI. Each set contains 2 traffic lights, each with a red, yellow and green LED for road traffic and a red and green LED for pedestrians. Suitable for crosswalks as e. g. zebra crossings. Prototypical filigree brass mast with base socket for easy mounting. Maintenance free by LED lighting. Attached electronics controls both traffic lights in an automatic sequence. Height: 7,8 cm.

Selling price: CHF 85.90 RRP CHF 96.00

In stock: 1 on the shelf, shipped within 1-3 days

H0 Road tunnel modern, with LED mirroring- and depth effect
Viessmann 5098 Scale H0
H0 Road tunnel modern, with LED mirroring- and depth effect

One piece Vollmer stone art street is attached. Length: 18 cm. The tunnel portal is made of Vollmer stone art. Dimensions: L 12 x W 7,6 x H 4,5 cm.

Selling price: CHF 59.90 RRP CHF 66.10

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Timer train stop
Viessmann 5208
Timer train stop

Allows an automatical stop in station area with soft stop and start movement. Even stopover by shuttle service control module items 5214 and 5204 is possible – one stopover is sufficient for various breakpoints! Push-pull operation is possible. Integrated track occupancy detectors make track- or signal contacts dispensable, works in both directions. Integrated light signal control for both directions with prototypical smooth change of light. The stop time, starting acceleration and braking time are separately adjustable. Useable with AC, DC and digital operation.

Selling price: CHF 115.00 RRP CHF 128.00

In stock: 1 on the shelf, shipped within 1-3 days