Electronics
This cable is designed especially for supplying power to your LGB tracks and is colour-coded. Cross-section: 0.5 mm2, length: 20 m.
In stock: 1 on the shelf, shipped within 1-3 days
Model This decoder is suitable for use in digital operation (DCC, mfx) as well as in analogue operation (DC). It can be used to convert all LGB motive power units built from 2014 with the 27-pin interface. Many vehicles with the old 10-pin interface can be converted by means of the 55529 interface adapter. Vehicles without an interface can be converted by means of the included interface board; size of the interface board approx. 65 mm x 40 mm. A speaker box is also included, but other speakers with suitable electrical characteristics can also be connected. Compared to the previous decoder, the performance data have been considerably increased; it also offers considerably more functions and programming options. The decoder can be conveniently programmed and adapted to your individual needs with the Märklin decoder tool (https://www.maerklin.de/de/service/downloads/neu-nachruest-decoder-mld3msd3/mdecodertool-mdt3/). The extensive sound library, which has been specially expanded to include a large number of the well-known LGB models and is constantly being added to, can be accessed via the Internet. Technical data: - Total load capacity max. 10 A, motor output > 4 A - Audio power (sound) 6.7 W/4 Ω - Locomotive address programmable from 1-10239 - 14 or 28 (128) speed levels - Load control adjustable to different locomotive types in analogue and digital operation - Parallel control for all light and function outputs - Programmable blinking light and short-duration functions. These and other functions can be programmed with the Märklin CS 2 and CS 3 central units as well as the Märklin Mobile Station. Highlights Now 32 functions Max. 10 A total current Optimised coasting behaviour Volume of the sounds individually adjustable Calibration function for adapting the motors
In stock: 1 on the shelf, shipped within 1-3 days
Bridge plug for 21-pin interface according to NEM 660, universally usable.
In stock: 1 on the shelf, shipped within 1-3 days
For connecting a switched-mode power supply 66361 and up to 2 Mobile Stations (60657 or 60653/Trix 66955 or 66950). Suitable for the gauges Märklin H0, Trix H0 and Minitrix. Dimensions 96 x 85 x 40 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Distributor for connecting up to a maximum of 5 MS II units to one output of the 60112 or 60114 or the 60113 or 60116 digital connector box. One MS II hub can be connected to each output of the connector box. This allows up to a maximum of 10 MS II units to be operated on the 60112 or 60114 or the 60113 or 60116 connector box. The current consumption of one MS II is approx. 50 mA. Dimensions 96 x 85 x 40 mm. This distributor cannot be connected to the CS2 and CS3/CS3+! To connect several MS II units to the CS2 or CS3/CS3+, please use items 60125/60145 and 60124.
In stock: 1 on the shelf, shipped within 1-3 days
Connection for additional devices from the Digital range to the Central Station. Fixed 9-pin connection cable, 60 cm long (can be extended with 60126) and 9-pin socket for another Terminal or other devices on the main line. 4 sockets 7-pin for connection of Mobile Station (Adapter cable 60124 required) or other peripheral devices. Dimensions 96 x 85 x 40 mm. The successor product is the Terminal 60145.
In stock: 1 on the shelf, shipped within 1-3 days
Inverter for the switched-mode power supplies 66360/66361 or 60041/60061, for converting the DC voltage into an AC voltage or for connecting DC-compatible accessories. The AC voltage can be used for solenoid accessories that have to be switched with alternating current, for level crossings, and to supply controllers that only work with AC voltage (such as the 6021, 6015, 6017). The DC voltage can be used, for example, to supply the layout lighting or correspondingly DC-compatible accessories or controllers. There is therefore a barrel socket on the front (for the 66360) and a 4-pin high-current mini-DIN plug (for the 60041), and on the back one DC socket and one AC socket. Dimensions 96 x 85 x 40 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Connection facility for additional units from the Digital range to the Central Station. Fixed 9-pin connecting cable, 60 cm long (can be extended with the 60126), and a 9-pin socket for another Terminal or other units on the main line. 4 sockets with 7 pins for connecting a Mobile Station (adapter cable 60124 required) or other peripheral units. Dimensions 96 x 85 x 40 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Switched-mode power supply for connecting or supplying the Central Station 60216, 60226 as well as 60214/60215 and the Booster 60175 and 60174. Input 220 to 240 V. Output switchable 15/75 W (only Minitrix Japan and Australia), 19 V/100 W or 22 V/110 W DC voltage. Connection: 4-pin high-current mini-DIN plug. Recommended for Gauge 1 and LGB indoor. The cable cross-section from the Central Station to the track must be at least 0.5 mm²! Switched-mode power supply recommended for Gauge 1 or LGB indoor.
In stock: 1 on the shelf, shipped within 1-3 days
Model Power amplifier for digitally controlled large layouts. Multi-protocol capable in conjunction with the Central Station 60216, 60226 as well as 60213-60215. Connected by means of a 7-pin data bus lead directly to the Central Station 60216, 60226 as well as 60213-60215. Several Boosters can be used in one system by means of the Terminals 60125/60145. Automatic registration on the Central Station 60216, 60226 as well as 60213-60215. Status display by means of an LED on the Booster and graphically in the display of the Central Station. When the switched-mode power supply 60041 is used, the result is a maximum output of 58 VA and a maximum current of 3 A (with the 60216, 60226 or 60215 with the switched-mode power supply 60101 the result is a maximum current of 5 A, recommended exclusively for Gauge 1. Please be sure to note that the cable cross-section must be greater than 0.5 mm²!). Dimensions 150 x 110 x 42 mm. Note The Booster 60175 is intended only for operation in conjunction with the Central Station 60216, 60226 as well as 60213-60215.
In stock: 1 on the shelf, shipped within 1-3 days
Central unit with a built-in controller. It supplies the layout with power and control commands. The built-in controller has the same range of functions as the Control 80 f. Connection terminals for the transformer and track. 1 connection socket for a booster (item no. 6017). Operating indicator via LED. Output current max. 2.5 A. Dimensions 135 x 120 x 80 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype As a multi-protocol controller with its high-resolution, modern colour touchscreen, its two throttles, and its integrated central track diagram control panel, the Central Station 3 plus offers the possibility of controlling the locomotives and the entire layout simply and conveniently. The Central Station 3 plus is to be used only in conjunction with MÄRKLIN switched-mode power supplies. It is not compatible with MÄRKLIN transformers. A switched-mode power supply is not included in the contents supplied. Model As a multi-protocol controller with its high-resolution, modern colour touchscreen, its 2 throttles, and its integrated central track diagram control panel, the Central Station 3 plus offers the possibility of controlling the locomotives and the entire layout simply and conveniently. Up to 32 functions can be controlled on locomotives; with accessory items up to 320 Motorola or 2048 DCC solenoid accessories are possible. The Central Station 3 plus also has 2 built-in locomotive card readers (for storing the locomotive data on a locomotive card or for quickly calling up the locomotive by inserting the locomotive card), an SD card slot for expanding the memory, and an integrated speaker for playing sounds typical of model railways. A powerful Booster is integrated to supply the layout with power for running and switching. The Central Station 3 plus can be used with several units, i.e. with the optional cable (60123) several Central Station 3 plus units (60216), each with a network connection, can be operated together on one layout. Additional driver's desks, other layouts, and keyboards extend the operation of the layout, whereby shared and separate configurations for the layout areas to be controlled can be held in the Central Station 3 plus. The Central Station 3 plus has an integrated s88 connection, 2 built-in USB hosts (for a mouse, keyboard, or USB stick, for example), a USB charging socket, a network connection for communicating with a PC, connections for 2 Mobile Stations, a connection for external speakers, and others for the Märklin bus system. Load capacity at the feeder track: max. 5 A, load capacity at the programming track: max. 1.2 A. Max. outputs: - 5.0 A when using a Märklin 100W switched-mode power supply, exclusively with Gauge 1 and LGB. - 3.0 A when using a Märklin 60W/50W switched-mode power supply with H0 and N gauge. The Central Station 3 plus is to be used only in conjunction with MÄRKLIN switched-mode power supplies. It is not compatible with MÄRKLIN transformers. Please be sure to note that the cable cross-section must be greater than 0.5 mm². A switched-mode power supply is not included in the contents supplied. Dimensions 320 x 195 x 80 mm. Highlights Digital multi-protocol controller (mfx, mfx+, DCC, Motorola) High-resolution, modern colour touchscreen Integrated, central track diagram control panel Housing with a central stop button and 2 rotary controllers in robust industrial quality Up to 32 controllable locomotive functions. 2 built-in locomotive card readers Integrated speaker Built-in SD card slot Integrated powerful Booster Output: 3.0 A when using a Märklin 60W/50W switched-mode power supply with H0 and N gauge. Output: 5.0 A when using a Märklin 100W switched-mode power supply exclusively with Gauge 1 and LGB. Up to 320 Motorola and 2048 DCC solenoid accessories can be controlled Route control (incl. shuttle train control). 2 USB hosts for a mouse, keyboard, USB stick, etc. and 1 USB charging socket Direct connection for 2 Mobile Stations and one bus expansion unit Integrated s88 connection Connections for a network, external speakers, and the Märklin bus, for example Expansions can be connected by means of the Märklin bus Can be used with several units with the Central Station 3 plus You can find further technical information => in our instructions. You can find free information and updates here
In stock: 1 on the shelf, shipped within 1-3 days
Note: To connect the Mobile Station, the connection box 60112 or 60114 (gauge 1) or 60113 or 60116 (H0) is required. Highlights Simple, convenient operation. Backlit graphic display with self-explanatory pictograms. 16 switchable additional functions. 320 solenoid accessories can be switched. Integrated locomotive card reader. Simple wiring (Plug & Play) to the Gleisbox and the Central Station. Integrated Märklin Digital locomotive database. Product description Digital handheld controller unit. 11 locomotives can be controlled by direct access. Locomotives are selected from the integrated Märklin Digital locomotive database or via digital addresses. 16 locomotive functions and 320 solenoid accessories can be switched. Automatic display of the function states on the integrated, backlit black-and-white full graphic display by means of self-explanatory pictograms for mfx locomotives or when selecting a locomotive from the integrated digital locomotive database. Integrated locomotive card reader. Red illuminated Stop button. 1.9 A power supply in the optionally available Gleisbox (60112 or 60114 / 60113 or 60116). Direct connection of 2 Mobile Stations (60653 or 60657) to one Gleisbox (60112/60114 or 60113/60116), which then work together in master-slave mode. By using MS II Hubs (60122), the number of controllers in use can be increased to up to 10. When the Mobile Station is operated on the Central Station (60216, 60226 and 60213-60215), the Central Station settings can be used (complete locomotive list of the Central Station, all solenoid accessories of the Central Station keyboard with their designations). Driving and controlling vehicles in the motorola, mfx and DCC formats, switching solenoid accessories in the motorola and DCC formats. Dimensions 160 x 100 x 39 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Note: A CS2 or a CS3/CS3+ with a WLAN connection or the WLAN receiver box 60117 is required as a receiver for the MS WLAN. Model Digital handheld controller unit. 40 locomotives can be controlled with direct access. Automatic registration of mfx locomotives. Integrated locomotive database for selecting older Märklin/Trix/LGB locomotives. Manual registration of MM and DCC locomotives by means of digital addresses is possible. Up to 32 locomotive functions can be controlled, with a display of the function statuses. Self-explanatory function pictograms with mfx and database locomotives. Up to 320 solenoid accessories can be controlled. Can be operated with one hand thanks to the grip (Pop Socket) included on the back. The display content rotates to match the position of the unit. Illuminated stop button to signal the stop status. Backlit b/w full graphics display. Dimensions 160 x 100 x 42 mm. Wireless coupling with a WLAN receiver box (60117) or with a CS2 as well as a CS3/CS3+ (60216, 60226 as well as 60213–60215), if the latter is part of a WLAN-capable network. When coupled with a CS, the Mobile Station WLAN can access its complete locomotive list and the solenoid accessories with the addresses 1 to 320. Up to four MS WLAN units can be coupled to one WLAN receiver box (item no. 60117). Either 4 AAA batteries or corresponding rechargeable batteries can be used to operate the unit. However, these are not included in the contents supplied. Available exclusively in the countries of the European Union, USA, Canada, CH, UK, Japan, Australia, and New Zealand. Highlights Simple operation, familiar from the MS2, even without looking One-handed operation with the grip (Pop Socket) included on the back New tactile rotary controller for even more convenient handling Backlit graphics display with self-explanatory pictograms The display content rotates to match the position of the unit Simple connection to the WLAN receiver box or to a Central Station 2, 3 or 3 plus Up to 32 controllable auxiliary functions. 320 solenoid accessories can be controlled Integrated Märklin Digital locomotive database Can be used in the 2-rail and 3-rail area. … and of course all of the great features of the MS2 Note Operate the layout wirelessly with one hand with the Mobile Station WLAN!
In stock: 1 on the shelf, shipped within 1-3 days
Receiver for switching points, signals or uncoupling tracks.
In stock: 1 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 hobby locomotives of the 36 series. The Märklin sound decoder has a 21-pin interface and a matching interface board for bogie locomotives of the 36 series. The Märklin sound decoder supports the digital formats mfx, MM 1, MM2 and DCC. Preset sound of an electric locomotive (TRAXX).
In stock: 1 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-performance motor or other DC motors. The Märklin sound decoder has a soldered cable harness with an 8-pin NEM interface plug for retrofitting many locomotives with a corresponding NEM interface and locomotives with space constraints. The Märklin sound decoder supports the digital formats mfx, MM1, MM2 and DCC. Pre-set sound of a diesel locomotive.
In stock: 1 on the shelf, shipped within 1-3 days
Model For retrofitting locomotives with a built-in PluX22 interface to NEM 658. The märklin SoundDecoder3 supports the mfx, MM1, MM2, DCC and RailCom® digital formats. Preset sound of a diesel locomotive. Highlights mfx/DCC/RailCom®-capable Full integration into the Märklin digital system Additional physical outputs Märklin's own mapping Note A Märklin 60970 decoder tester is required for programming.
In stock: 1 on the shelf, shipped within 1-3 days
Suitable for the 4026, 4027, 4032, 4044, 4051, 4052, 4111 and 4112 coaches. Consisting of a light bulb with a lamp holder, a connecting cable and a plug. Connection socket for additional lighting.
In stock: 1 on the shelf, shipped within 1-3 days
Model Pack of 10 pieces. Note The plugs and sockets cannot be combined with the earlier version (pack item no. 7130). The sockets fit with limitations in the jacks of the earlier version of control panels and switch panels. Many controllers and decoders in the Märklin range have today already been converted to the new standard.
Content: 10 pc. (CHF 0.49 / 1 pc.)
In stock: 1 on the shelf, shipped within 1-3 days
With 4 single-pole changeover switches. Contacts can be loaded up to 2 A. To be operated by means of a control panel, a switch track, a contact track, a switch contact or a digital decoder.
In stock: 1 on the shelf, shipped within 1-3 days
Model For distributing a track or lighting circuit to 4 different lines with 2 connections each. For example, 4 sidings in the same track power circuit or 4 consumers in the same lighting circuit can be switched. With 8 connection sockets on the back and 2 on the side. All of the connections are for the new plugs from the 71400 set. 8 matching plugs are included. Dimensions 80 x 40 mm. Highlights All of the connections with new plug connections. Matching plugs are included Function corresponds to the 7274 unit
In stock: 1 on the shelf, shipped within 1-3 days
For the 43581-43586 coaches. Consisting of a power feed and current-conducting close coupler drawbars.
In stock: 1 on the shelf, shipped within 1-3 days
For the 4365 coach and the panorama coaches from the 4367 coach set. Consisting of a power feed, a lighting strip with lamp sockets, and 2 light bulbs. Can be used with the 7319 current-conducting coupler.
In stock: 1 on the shelf, shipped within 1-3 days