Electronics
DC Short 16 V/30 mA
In stock, shipped within 1-3 days
DC Clear 16 V For H0 signals with 16 V/30 mA supply
In stock, shipped within 1-3 days
DC Candle Yellow 19 V/50 mA
In stock, shipped within 1-3 days
DC Clear 6 mm 3.5 V/200 mA
In stock, shipped within 1-3 days
Transparent With detent 16 V/30 mA
In stock, shipped within 1-3 days
For fitting at a suitable place in K tracks or in C tracks. The switching contact (reed contact) triggers a pulse when a vehicle with a switching magnet mounted on its underside passes over it. Potential-free connection. Switching current up to 2 A. Length 38 mm.
In stock, shipped within 1-3 days
3-pole connector (e.g. for 10019, 10520, 10521, 10522, 10524, 10525, 10526, 10775, 10777). The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.
In stock, shipped within 1-3 days
DC 16 V/30 mA Red M 60.201
In stock, shipped within 1-3 days
DC 16 V/30 mA MS 2,8 for Roco®, Trix®, Fleischmann® 12-14 V/60 mA
In stock, shipped within 1-3 days
25 m reel Single-core PVC isolation Loads 5 A For higher loads Cu.-conducter 14 x 0.15 mm Application: for digital layouts Connection to track
In stock, shipped within 1-3 days
25 m reel Single-core PVC isolation Loads 5 A For higher loads Cu.-conducter 14 x 0.15 mm Application: for digital layouts Connection to light
In stock, shipped within 1-3 days
21MTC adapter board 2, shape of 6090x, with AUX3 and AUX4 (for 21 MTC (not MKL) decoders from generation 3) The 21 MTC adapter board 2 is also suitable for digitising a loco without interface. It is very helpful, if you do not intend to wire the decoder freely or if you wish to use more than four function outputs on your LokPilot or LokSound decoder. This adapter board simulates the typcial size and shape of Märklin® 6090x-decoders and can be installed in every suitable position. Decoders with 21MTC connectors (ESU LokPilot or LokSound favoured) are simply plugged onto the adapter board. On the output side, the adapter offers already soldered cables (appr. 20cm length) for all contacts needed. Thus the wiring of your loco is child´s play. There are amplifiers (appr. 250mA each) for function AUX3 and AUX4 (the decoder´s logical outputs) so that ESU decoders have up to 12 available physical function outputs. Dimensions: Length 35.5mm x 20.0mm (With mounting tab: 40.5mm x 20.0mm) Art.No. 51968 21MTC adapter board 2, shape of 6090x, with AUX3 and AUX4 (for 21 MTC (not MKL) decoders from generation 3) 51968
In stock, shipped within 1-3 days
Handicraft set. Universally applicable LEDs. No soldering of cables is required. Including resistor and diode. Dimensions: L 1,6 mm x W 0,8 mm.
In stock, shipped within 1-3 days
Modern street light epoch IV – VI. Practical plug-in socket provides flexible use and quick exchange of lamps. Maintenance free by LED lighting. Height: 10 cm.
In stock, shipped within 1-3 days
Complete kit. Maintenance free by LED lighting. Prototypical brass mast with base socket for easy mounting. Mounting without soldering and any tool. Street light epochs III – VI. Height: 10 cm.
In stock, shipped within 1-3 days
25 m reel Brown/yellow Double-core For Roco® PVC isolation Loads 3 A Cu.-conducter 18 x 0.10 mm Connection to light Please note that we no longer carry the 10m reel (Item No. 3199)
In stock, shipped within 1-3 days
21MTC adapter board (for LokSound/LokPilot V3.0 and V4.0 and LokSound/LokPilot 5) The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do not intend to wire the decoder freely. The adapter board offers a possibility for installing a decoder with 21MTC connector. This decoder is simply plugged onto the board. At the other end 21 annular rings make a clean wiring of your loco possible. A neat conversion can be made via this adapter board and enables you to use all additional functions of the 21MTC connector (e.g. loud speaker outputs). Dimensions: Length 22.0mm x 17.0mm (With mounting tab: 27.0mm x 17.0mm)
In stock, shipped within 1-3 days
Improved! A better colour temperature and luminous efficiency as well as a larger angle of radiation ensure a particularly homogeneous illumination of building models. In FALLER kits the optimized cap accurately adapts to the provided holders. 12-16 V, AC/DC.
In stock, shipped within 1-3 days
H0 retrofit decoder set (60760)
In stock, shipped within 1-3 days
Model Feedback module for contact devices on digitally controlled layouts. Can be plugged into the L88 (60883) with the connecting cable included. Connection socket for another s 88 decoder (60881). 16 inputs for contact devices. The L88 (60883) is required for connection to the CS2 or CS3! Highlights All connections with lift terminals With a network cable
In stock, shipped within 1-3 days
Model For switching 4 different track or lighting circuits on or off. For example, 4 sidings in different track power circuits can be switched. With 8 connection sockets on the back. All of the connections are for the new plugs from the 71400 set. 8 matching plugs are included. Dimensions 80 x 40 mm. Highlights All of the connections with new plug connections. Matching plugs are included Function corresponds to the 7273 unit
In stock, shipped within 1-3 days
Power supply plug. For accessory feed. Attention: Not suitable for z21/Z21!
In stock, shipped within 1-3 days
Modern street light epoch IV – VI. Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 10.0 cm.
In stock, shipped within 1-3 days
Complete kit. Maintenance free by LED lighting. Prototypical brass mast with base socket for easy mounting. Mounting without soldering and any tool. Height: 5,6 cm.
In stock, shipped within 1-3 days