H0 and N rolling stock, lighting and cable cars
Brawa, model railways made with care
Locomotives, coaches and wagons in H0 and N, plus street lights, cable cars, bulbs and wiring: the world of a family firm from Waiblingen.
- 1375items in the shop
- H0 and Nthe scales in the range
- 1948the year of the founding

What makes Brawa
- A family firm since 1948: founded by Artur Braun in Waiblingen, in southern Germany, Brawa is run today by the third generation of the family.
- Love of detail: individually fitted handrails, sprung buffers, crisp printing: every model starts from measurements and photographs of the original and a study of the construction drawings.
- Sturdy locomotives: most are largely die-cast zinc, for weight and robustness, for DC or AC, with sound and, on steam locomotives, smoke.
- Cable cars and lighting: H0 cable cars are a house speciality, starting with the Nebelhorn cableway in Oberstdorf; lamps and signals follow, with load-bearing parts made of brass or etched sheet.
The Brawa families
Rolling stock
210 itemsLocomotivesLocomotives in H0 and N, from the DB AG TRAXX BR 147 to the DR BR 132.See the items
56 itemsRailcars and multiple unitsTWINDEXX Vario double-deck trains in N, DRG VT 137 diesel railcar in H0.See the items
360 itemsPassenger coachesDB express coaches, SBB coaches and complete trains in H0 and N.See the items
448 itemsFreight wagonsCovered wagons, container wagons and luggage vans, including the SBB K2 "Ovomaltine".See the itemsScenery and cable cars
117 itemsLighting and scenery accessoriesWooden-mast lights, park lanterns and LED wall lights, clocks and telephone boxes.See the items
12 itemsCable carsNebelhorn, Hahnenkamm, Kanzelwand, Titlis and chairlift, in H0 and N.See the itemsBulbs and wiring
All Brawa items
Prototype The summer timetable of 1956 included three six-part reversible train sets deployed by the Dortmund central station railway depot (Bw Dortmund Hbf). Comprising a Bif (control car), an ABib and four Bib cars of standard design, these sets were pulled or pushed, depending on the direction, by a 78-series locomotive stationed at Bw Dortmund Hbf. In the precursor to the S-Bahn service, these reversible trains departed Dortmund central station multiple times daily, heading to Hagen, Witten, Herne, Wanne-Eickel and Gelsenkirchen. The three timetables commenced between 4 and 5 am and, in some cases, ran until shortly before midnight. With a typical turnaround time of about ten minutes at the destination station, the advantages of these reversible trains were fully exploited in terms of the timetable. Model Metal axle holders True to original axle box cover Individually mounted steps Axle brake frame with brake blocks in wheel plane Individually mounted brake systems True to original interior fitting Individually mounted wheelchocks Finely engraved rivets The DC models of the Train's Command Car must be equipped with a function decoder, e.g. FH22-4 (Order No. 0018271.00), for digital operation.
On order, shipped within 10-15 days
Prototype The development of the two-axle standard corridor carriages of the “Austauschbauart” (a design based on standardised components) was closely linked to the production of standardised railway components, which emerged as a key industry in the 1920s. The DRG (Deutsche Reichsbahn Gesellschaft) had set itself the goal of having wagon components manufactured on a cross-company basis in accordance with standardised specifications and conditions, in order to drastically reduce the cost of subsequent maintenance at its own works and to ensure the use of interchangeable components. Against this background, the DRG commissioned the Gesellschaft Deutscher Waggonfabriken (D.W.V.) to develop and deliver the required standard corridor carriages. The specification for the standardised wagons of the “Austauschbauart” meant it was no longer necessary to produce around 1,400 drawings for each individual wagon class. Instead, there was now one basic type that provided the basis for the modified designs, which required approximately 150 drawings each. Starting in 1928, almost 5,500 cars of the various classes BCi-28, Ci-28, CDi-29, Pwi-28, Ci-29 BCi-29, Pwi-29, Bi-29 and Ci-30 were produced for passenger transport in several delivery series. These wagons met the expectations of the DRG and meant that many older state railway cars and related classes could be decommissioned. The running characteristics of these coaches, which were not particularly satisfactory for the passengers, soon earned them the well-known nickname “Donnerbüchsen”. The turmoil of the war years inevitably led to the two-axle standard corridor carriages subsequently finding their way into the inventories of many European railway companies. However, they all shared a common fate – by the late 1960s and early 1970s all of these carriages had been removed from the general maintenance stock. The cars that still exist today serve as very popular attractions at various railway museums in Germany and abroad. Model Metal axle holders True to original axle box cover Individually mounted steps Axle brake frame with brake blocks in wheel plane Individually mounted brake systems True to original interior fitting Individually mounted wheelchocks Finely engraved rivets
On order, shipped within 10-15 days
Prototype The development of the two-axle standard corridor carriages of the “Austauschbauart” (a design based on standardised components) was closely linked to the production of standardised railway components, which emerged as a key industry in the 1920s. The DRG (Deutsche Reichsbahn Gesellschaft) had set itself the goal of having wagon components manufactured on a cross-company basis in accordance with standardised specifications and conditions, in order to drastically reduce the cost of subsequent maintenance at its own works and to ensure the use of interchangeable components. Against this background, the DRG commissioned the Gesellschaft Deutscher Waggonfabriken (D.W.V.) to develop and deliver the required standard corridor carriages. The specification for the standardised wagons of the “Austauschbauart” meant it was no longer necessary to produce around 1,400 drawings for each individual wagon class. Instead, there was now one basic type that provided the basis for the modified designs, which required approximately 150 drawings each. Starting in 1928, almost 5,500 cars of the various classes BCi-28, Ci-28, CDi-29, Pwi-28, Ci-29 BCi-29, Pwi-29, Bi-29 and Ci-30 were produced for passenger transport in several delivery series. These wagons met the expectations of the DRG and meant that many older state railway cars and related classes could be decommissioned. The running characteristics of these coaches, which were not particularly satisfactory for the passengers, soon earned them the well-known nickname “Donnerbüchsen”. The turmoil of the war years inevitably led to the two-axle standard corridor carriages subsequently finding their way into the inventories of many European railway companies. However, they all shared a common fate – by the late 1960s and early 1970s all of these carriages had been removed from the general maintenance stock. The cars that still exist today serve as very popular attractions at various railway museums in Germany and abroad. Model Metal axle holders True to original axle box cover Individually mounted steps Axle brake frame with brake blocks in wheel plane Individually mounted brake systems True to original interior fitting Individually mounted wheelchocks Finely engraved rivets
On order, shipped within 10-15 days
Prototype The development of the two-axle standard corridor carriages of the “Austauschbauart” (a design based on standardised components) was closely linked to the production of standardised railway components, which emerged as a key industry in the 1920s. The DRG (Deutsche Reichsbahn Gesellschaft) had set itself the goal of having wagon components manufactured on a cross-company basis in accordance with standardised specifications and conditions, in order to drastically reduce the cost of subsequent maintenance at its own works and to ensure the use of interchangeable components. Against this background, the DRG commissioned the Gesellschaft Deutscher Waggonfabriken (D.W.V.) to develop and deliver the required standard corridor carriages. The specification for the standardised wagons of the “Austauschbauart” meant it was no longer necessary to produce around 1,400 drawings for each individual wagon class. Instead, there was now one basic type that provided the basis for the modified designs, which required approximately 150 drawings each. Starting in 1928, almost 5,500 cars of the various classes BCi-28, Ci-28, CDi-29, Pwi-28, Ci-29 BCi-29, Pwi-29, Bi-29 and Ci-30 were produced for passenger transport in several delivery series. These wagons met the expectations of the DRG and meant that many older state railway cars and related classes could be decommissioned. The running characteristics of these coaches, which were not particularly satisfactory for the passengers, soon earned them the well-known nickname “Donnerbüchsen”. The turmoil of the war years inevitably led to the two-axle standard corridor carriages subsequently finding their way into the inventories of many European railway companies. However, they all shared a common fate – by the late 1960s and early 1970s all of these carriages had been removed from the general maintenance stock. The cars that still exist today serve as very popular attractions at various railway museums in Germany and abroad. Model Metal axle holders True to original axle box cover Individually mounted steps Axle brake frame with brake blocks in wheel plane Individually mounted brake systems True to original interior fitting Individually mounted wheelchocks Finely engraved rivets
On order, shipped within 10-15 days
Prototype The development of the two-axle standard corridor carriages of the “Austauschbauart” (a design based on standardised components) was closely linked to the production of standardised railway components, which emerged as a key industry in the 1920s. The DRG (Deutsche Reichsbahn Gesellschaft) had set itself the goal of having wagon components manufactured on a cross-company basis in accordance with standardised specifications and conditions, in order to drastically reduce the cost of subsequent maintenance at its own works and to ensure the use of interchangeable components. Against this background, the DRG commissioned the Gesellschaft Deutscher Waggonfabriken (D.W.V.) to develop and deliver the required standard corridor carriages. The specification for the standardised wagons of the “Austauschbauart” meant it was no longer necessary to produce around 1,400 drawings for each individual wagon class. Instead, there was now one basic type that provided the basis for the modified designs, which required approximately 150 drawings each. Starting in 1928, almost 5,500 cars of the various classes BCi-28, Ci-28, CDi-29, Pwi-28, Ci-29 BCi-29, Pwi-29, Bi-29 and Ci-30 were produced for passenger transport in several delivery series. These wagons met the expectations of the DRG and meant that many older state railway cars and related classes could be decommissioned. The running characteristics of these coaches, which were not particularly satisfactory for the passengers, soon earned them the well-known nickname “Donnerbüchsen”. The turmoil of the war years inevitably led to the two-axle standard corridor carriages subsequently finding their way into the inventories of many European railway companies. However, they all shared a common fate – by the late 1960s and early 1970s all of these carriages had been removed from the general maintenance stock. The cars that still exist today serve as very popular attractions at various railway museums in Germany and abroad. Model Metal axle holders True to original axle box cover Individually mounted steps Axle brake frame with brake blocks in wheel plane Individually mounted brake systems True to original interior fitting Individually mounted wheelchocks Finely engraved rivets
On order, shipped within 10-15 days
Prototype The development of the two-axle standard corridor carriages of the “Austauschbauart” (a design based on standardised components) was closely linked to the production of standardised railway components, which emerged as a key industry in the 1920s. The DRG (Deutsche Reichsbahn Gesellschaft) had set itself the goal of having wagon components manufactured on a cross-company basis in accordance with standardised specifications and conditions, in order to drastically reduce the cost of subsequent maintenance at its own works and to ensure the use of interchangeable components. Against this background, the DRG commissioned the Gesellschaft Deutscher Waggonfabriken (D.W.V.) to develop and deliver the required standard corridor carriages. The specification for the standardised wagons of the “Austauschbauart” meant it was no longer necessary to produce around 1,400 drawings for each individual wagon class. Instead, there was now one basic type that provided the basis for the modified designs, which required approximately 150 drawings each. Starting in 1928, almost 5,500 cars of the various classes BCi-28, Ci-28, CDi-29, Pwi-28, Ci-29 BCi-29, Pwi-29, Bi-29 and Ci-30 were produced for passenger transport in several delivery series. These wagons met the expectations of the DRG and meant that many older state railway cars and related classes could be decommissioned. The running characteristics of these coaches, which were not particularly satisfactory for the passengers, soon earned them the well-known nickname “Donnerbüchsen”. The turmoil of the war years inevitably led to the two-axle standard corridor carriages subsequently finding their way into the inventories of many European railway companies. However, they all shared a common fate – by the late 1960s and early 1970s all of these carriages had been removed from the general maintenance stock. The cars that still exist today serve as very popular attractions at various railway museums in Germany and abroad. Model Metal axle holders True to original axle box cover Individually mounted steps Axle brake frame with brake blocks in wheel plane Individually mounted brake systems True to original interior fitting Individually mounted wheelchocks Finely engraved rivets
On order, shipped within 10-15 days
Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted axle box cover Individually mounted brake systems True to original frame construction Die-cast zinc floor Insertable stakes individually enclosed
On order, shipped within 10-15 days
Prototype When the DRG [Deutsche Reichsbahn-Gesellschaft] was founded, a large quantity of rail carriages according to the Prussian standards were assumed meaning that, due to the modest financial means, there was no opportunity to procure high quantities of succession models. Although a 4-axle rail carriage was taken into consideration during the set-up of replacement construction drawings, only a limited amount of 95 units were built. Demand for a new 4-axle rail carriage only grew with the emergence of welding technology and the armament of the German Reich. Consequently, multiple prototypes and ranges with numerous differences were created in quick succession. In 1934, SEAG supplied the first two trial wagons. They were produced using St 52 and also had a removable wooden or steel brakeman’s cab respectively. The further deliveries up until 1939 were also produced using St 52, had three cross-members and seven stake pairs. The brakeman’s cab was removable. An amended variant was built from 1941 onwards. This now consisted of the weaker St 37 which meant that a fourth cross-member had to be included. Accordingly, there were now eight lateral stake pairs. For vehicle transports, the brakeman’s cab only had a foldable platform railing. At the request of the Wehrmacht, all of the older wagons had to be converted in this manner. The first deliveries boasted a welded box bogie but all later deliveries were equipped with the press plate bogies. In addition to the deliveries to the DR, the Wehrmacht also received wagons and used them for military purposes, e.g. in the trains of the mobile V2 ramps. In total, approximately 3,500 wagons were built by the end of the war. After 1945, the welded rail carriages were distributed throughout half of Europe. In France, the equipping of these carriages with new bogies is still common. At the end of the war, DB had approximately 1,400 wagons in the inventory and it is estimated that DR had about 500. Both railway companies continued to use the wagons for a long period of time and they were only withdrawn in the 1980s. Even in 1979, DB had over 1,000 of the wagons bearing the R 672 designation in use. The original wagons were withdrawn earlier in the DR. However, the lack of wagons in the 1980s lead to the last R 672 wagons being purchased from DB. DR designated them as Rkk [3811] and used them until the slump in traffic volume in 1990. Model Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted axle box cover Individually mounted brake systems True to original frame construction Die-cast zinc floor Insertable stakes individually enclosed
On order, shipped within 10-15 days
Prototype When the DRG [Deutsche Reichsbahn-Gesellschaft] was founded, a large quantity of rail carriages according to the Prussian standards were assumed meaning that, due to the modest financial means, there was no opportunity to procure high quantities of succession models. Although a 4-axle rail carriage was taken into consideration during the set-up of replacement construction drawings, only a limited amount of 95 units were built. Demand for a new 4-axle rail carriage only grew with the emergence of welding technology and the armament of the German Reich. Consequently, multiple prototypes and ranges with numerous differences were created in quick succession. In 1934, SEAG supplied the first two trial wagons. They were produced using St 52 and also had a removable wooden or steel brakeman’s cab respectively. The further deliveries up until 1939 were also produced using St 52, had three cross-members and seven stake pairs. The brakeman’s cab was removable. An amended variant was built from 1941 onwards. This now consisted of the weaker St 37 which meant that a fourth cross-member had to be included. Accordingly, there were now eight lateral stake pairs. For vehicle transports, the brakeman’s cab only had a foldable platform railing. At the request of the Wehrmacht, all of the older wagons had to be converted in this manner. The first deliveries boasted a welded box bogie but all later deliveries were equipped with the press plate bogies. In addition to the deliveries to the DR, the Wehrmacht also received wagons and used them for military purposes, e.g. in the trains of the mobile V2 ramps. In total, approximately 3,500 wagons were built by the end of the war. After 1945, the welded rail carriages were distributed throughout half of Europe. In France, the equipping of these carriages with new bogies is still common. At the end of the war, DB had approximately 1,400 wagons in the inventory and it is estimated that DR had about 500. Both railway companies continued to use the wagons for a long period of time and they were only withdrawn in the 1980s. Even in 1979, DB had over 1,000 of the wagons bearing the R 672 designation in use. The original wagons were withdrawn earlier in the DR. However, the lack of wagons in the 1980s lead to the last R 672 wagons being purchased from DB. DR designated them as Rkk [3811] and used them until the slump in traffic volume in 1990. Model Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted axle box cover Individually mounted brake systems True to original frame construction Die-cast zinc floor Insertable stakes individually enclosed
On order, shipped within 10-15 days
Prototype When the DRG [Deutsche Reichsbahn-Gesellschaft] was founded, a large quantity of rail carriages according to the Prussian standards were assumed meaning that, due to the modest financial means, there was no opportunity to procure high quantities of succession models. Although a 4-axle rail carriage was taken into consideration during the set-up of replacement construction drawings, only a limited amount of 95 units were built. Demand for a new 4-axle rail carriage only grew with the emergence of welding technology and the armament of the German Reich. Consequently, multiple prototypes and ranges with numerous differences were created in quick succession. In 1934, SEAG supplied the first two trial wagons. They were produced using St 52 and also had a removable wooden or steel brakeman’s cab respectively. The further deliveries up until 1939 were also produced using St 52, had three cross-members and seven stake pairs. The brakeman’s cab was removable. An amended variant was built from 1941 onwards. This now consisted of the weaker St 37 which meant that a fourth cross-member had to be included. Accordingly, there were now eight lateral stake pairs. For vehicle transports, the brakeman’s cab only had a foldable platform railing. At the request of the Wehrmacht, all of the older wagons had to be converted in this manner. The first deliveries boasted a welded box bogie but all later deliveries were equipped with the press plate bogies. In addition to the deliveries to the DR, the Wehrmacht also received wagons and used them for military purposes, e.g. in the trains of the mobile V2 ramps. In total, approximately 3,500 wagons were built by the end of the war. After 1945, the welded rail carriages were distributed throughout half of Europe. In France, the equipping of these carriages with new bogies is still common. At the end of the war, DB had approximately 1,400 wagons in the inventory and it is estimated that DR had about 500. Both railway companies continued to use the wagons for a long period of time and they were only withdrawn in the 1980s. Even in 1979, DB had over 1,000 of the wagons bearing the R 672 designation in use. The original wagons were withdrawn earlier in the DR. However, the lack of wagons in the 1980s lead to the last R 672 wagons being purchased from DB. DR designated them as Rkk [3811] and used them until the slump in traffic volume in 1990. Model Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted axle box cover Individually mounted brake systems True to original frame construction Die-cast zinc floor Insertable stakes individually enclosed
On order, shipped within 10-15 days
Prototype When the DRG [Deutsche Reichsbahn-Gesellschaft] was founded, a large quantity of rail carriages according to the Prussian standards were assumed meaning that, due to the modest financial means, there was no opportunity to procure high quantities of succession models. Although a 4-axle rail carriage was taken into consideration during the set-up of replacement construction drawings, only a limited amount of 95 units were built. Demand for a new 4-axle rail carriage only grew with the emergence of welding technology and the armament of the German Reich. Consequently, multiple prototypes and ranges with numerous differences were created in quick succession. In 1934, SEAG supplied the first two trial wagons. They were produced using St 52 and also had a removable wooden or steel brakeman’s cab respectively. The further deliveries up until 1939 were also produced using St 52, had three cross-members and seven stake pairs. The brakeman’s cab was removable. An amended variant was built from 1941 onwards. This now consisted of the weaker St 37 which meant that a fourth cross-member had to be included. Accordingly, there were now eight lateral stake pairs. For vehicle transports, the brakeman’s cab only had a foldable platform railing. At the request of the Wehrmacht, all of the older wagons had to be converted in this manner. The first deliveries boasted a welded box bogie but all later deliveries were equipped with the press plate bogies. In addition to the deliveries to the DR, the Wehrmacht also received wagons and used them for military purposes, e.g. in the trains of the mobile V2 ramps. In total, approximately 3,500 wagons were built by the end of the war. After 1945, the welded rail carriages were distributed throughout half of Europe. In France, the equipping of these carriages with new bogies is still common. At the end of the war, DB had approximately 1,400 wagons in the inventory and it is estimated that DR had about 500. Both railway companies continued to use the wagons for a long period of time and they were only withdrawn in the 1980s. Even in 1979, DB had over 1,000 of the wagons bearing the R 672 designation in use. The original wagons were withdrawn earlier in the DR. However, the lack of wagons in the 1980s lead to the last R 672 wagons being purchased from DB. DR designated them as Rkk [3811] and used them until the slump in traffic volume in 1990. Model Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted axle box cover Individually mounted brake systems True to original frame construction Die-cast zinc floor Insertable stakes individually enclosed
On order, shipped within 10-15 days
Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 – 1958 – up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model Brake blocks in wheel plane Bogie with three-point support Individually mounted axle brake rod Individually mounted brake systems True to scale narrow frame Metal axle holders Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype Of the six-axle flat cars with low sides acquired from 1952 by the DR, the DB took over 1,044 units and described them as Samm 451. The cars were a speciality of the Eastern European railways; such types of car construction had not previously been available in the West. The cars, originally intended for the transport of super heavy tracked vehicles during troop transports, were mainly used at the end of their life cycle as construction freight cars for transporting rubble, gravel or excavated earth. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Multi-part brake system True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype The Württemberg version of this Gm car was built from 1907. Altogether 1,813 units were produced at different waggon factories until 1911. The characteristic of the Württemberg cars was the subdivision of the side panels into 8 segments and the steel waggon door. The undercarriages had an additional fish-bellied girder. These Württemberg cars only existed without a handbrake. After the First World War, numerous cars of this construction type came to the DRG where they were classified in the Hannover class district. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Many separately mounted parts Precise replica of board joints Metal axles Individually mounted brake systems
On order, shipped within 10-15 days
Prototype The Württemberg version of this Gm car was built from 1907. Altogether 1,813 units were produced at different waggon factories until 1911. The characteristic of the Württemberg cars was the subdivision of the side panels into 8 segments and the steel waggon door. The undercarriages had an additional fish-bellied girder. These Württemberg cars only existed without a handbrake. After the First World War, numerous cars of this construction type came to the DRG where they were classified in the Hannover class district. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Many separately mounted parts Precise replica of board joints Metal axles Individually mounted brake systems
On order, shipped within 10-15 days
Prototype The Württemberg version of this Gm car was built from 1907. Altogether 1,813 units were produced at different waggon factories until 1911. The characteristic of the Württemberg cars was the subdivision of the side panels into 8 segments and the steel waggon door. The undercarriages had an additional fish-bellied girder. These Württemberg cars only existed without a handbrake. After the First World War, numerous cars of this construction type came to the DRG where they were classified in the Hannover class district. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Many separately mounted parts Precise replica of board joints Metal axles Individually mounted brake systems
On order, shipped within 10-15 days

