RocoLine track
Straight track G1 with bedding. Length 230 mm (standard length).
In stock: 4 on the shelf, shipped within 1-3 days
Straight track DG1, diagonal straight element, with bedding. Length 119 mm. The diagonal straight track makes the extension of the distance between the parallel tracks possible but the rail siding still remains on the grid line.
In stock: 4 on the shelf, shipped within 1-3 days
Plastic insulating rail joiners for ROCO LINE tracks. Content: 24 pieces/pack.
In stock: 4 on the shelf, shipped within 1-3 days
ROCO LINE track ballast. Matches roadbed track in terms of color and grain. Genuine stone ballast.
In stock: 4 on the shelf, shipped within 1-3 days
Feeder track, for analogue operation. With EMC intereference suppression unit. Length 115 mm (half standard length). Not suitable for digital operation! This can cause malfunctions in digital mode, so please remove the interference-suppression capacitor when converting the railway layout to digital mode.
In stock: 3 on the shelf, shipped within 1-3 days
With built-in reed switch, to be actuated by means of a 42256 magnet.This potential-free switching contact can be installed at any point of a track layout. The size and colour of the sleeper goes with the ROCO LINE-track, thus camouflaging the contact. Can also be used as feedback-momentary contact along with feedback module 10787 or detector 10808.
In stock: 3 on the shelf, shipped within 1-3 days
Wheel retracker set. Places derailed wheels back on track. For GEOLINE and ROCO LINE tracks. (Construction kit without track).
In stock: 3 on the shelf, shipped within 1-3 days
Spring steel rail joiners for geoLine and ROCO LINE tracks. Content: 24 pieces/pack.
In stock: 3 on the shelf, shipped within 1-3 days
Single slip turnout EKW15, without turnout mechanisms. Standard design with internal switch rails. Length 230 mm (standard length), crossing angle 15°, branch radius 531 mm. For diagonal installation two D4 and one D12 are included. Suitable turnout mechanisms (2 pieces are required): 40295 (electric turnout mechanism left) or 40297 (manual turnout mechanism left) or 10030 (below baseboard mechanism). Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 2 on the shelf, shipped within 1-3 days
Curved turnout right hand BWr2/3, without turnout mechanism. Radius of main track and branch track 358 mm (R2), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.
In stock: 2 on the shelf, shipped within 1-3 days
Curved turnout left hand BWl2/3, without turnout mechanism. Radius of main track and branch track 358 mm (R2), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout. Previous item no: 42464
In stock: 2 on the shelf, shipped within 1-3 days
Curved turnout right hand BWr2/3, without turnout mechanism. Radius of main track and branch track 358 mm (R2), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout. Previous item no: 42465
In stock: 2 on the shelf, shipped within 1-3 days
Curved turnout left hand BWl5/6, without turnout mechanism. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives Previous item no: 42470
In stock: 2 on the shelf, shipped within 1-3 days
Curved turnout right hand BWr5/6, without turnout mechanism. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 2 on the shelf, shipped within 1-3 days
Turnout left hand Wl10, without turnout mechanism. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable turnout mechanisms: 40295, 40297 or 10030.
In stock: 2 on the shelf, shipped within 1-3 days
Turnout left hand Wl10, without turnout mechanism. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable turnout mechanisms: 40295, 40297 or 10030. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 2 on the shelf, shipped within 1-3 days
Turnout right hand Wr10, without turnout mechanism. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable turnout mechanisms: 40296, 40298 or 10030. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 2 on the shelf, shipped within 1-3 days
Single slip turnout EKW10, without turnout mechanisms. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 40295 (electric turnout mechanism left) or 40297 (manual turnout mechanism left) or 10030 (below baseboard mechanism). Please note the operating instructions!
In stock: 2 on the shelf, shipped within 1-3 days
Single slip turnout EKW10, without turnout mechanisms. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 40295 (electric turnout mechanism left) or 40297 (manual turnout mechanism left) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives Previous item no: 42493
In stock: 2 on the shelf, shipped within 1-3 days
Crossing K15. Length 230 mm (standard length), crossing angle 15°. The railroad lines that cross each other are not electrically isolated. By using a 10019 relay it is possible to polarize the frogs and incoporate the crossing like a normal solenoid accessory in a route locking. Two D4 and one D12 are included for diagonal installation. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Previous item no: 42497
In stock: 2 on the shelf, shipped within 1-3 days
Double slip turnout DKW10, without turnout mechanisms. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 40295 (electric turnout mechanism left) or 40297 (manual turnout mechanism left) or 10030 (below baseboard mechanism). Please note the operating instructions!
In stock: 2 on the shelf, shipped within 1-3 days
Crossing K15. Length 230 mm (standard length), crossing angle 15°. The railroad lines that cross each other are not electrically isolated. By using a 10019 relay it is possible to polarize the frogs and incoporate the crossing like a normal solenoid accessory in a route locking. Two D4 and one D12 are included for diagonal installation.
In stock: 2 on the shelf, shipped within 1-3 days
Crossing K30. Length of tracks 119 mm (= DG1). Crossing angle 30°. The railroad lines that cross each other are not electrically isolated. Among other things they are suitable for forming double track connections with the 15° turnouts or double slip turnouts.
In stock: 2 on the shelf, shipped within 1-3 days
Universal bedding switch drive. Low switching current consumption, limit switch. Note please: Like all ROCO switch drives, this drive of course features a limit switch. However, as the adjuster of the drive is held in its end position by the tongue adjustment mechanism of the switch itself (and only then will the limit switch function reliably), please do not try out the switch drive unless it is clip-connected to a switch.
In stock: 2 on the shelf, shipped within 1-3 days