Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Trix H0 and Minitrix

Trix, SBB and European trains in H0 and N

Crocodile, Landilok, Swiss Express Re 4/4 II and Giruno of the SBB, BLS Ae 6/8, plus trains from Germany and across Europe: Trix models the railway in 1:87 on two-rail DC, and in 1:160 with Minitrix.

Choose a family See all items

  • 692items in the shop
  • 1:87 and 1:160Trix H0 and Minitrix
  • Since 1964Minitrix and NEM two-rail
SBB Be 6/8 II Crocodile locomotive, Trix H0 model in 1:87, on a scenic layout

What Trix brings to your layout

  • The great Swiss locomotives: Be 6/8 II Crocodile, Ae 8/14 Landilok, Swiss Express Re 4/4 II, Giruno and RAe 4/8 Churchill of the SBB, Ae 6/8 and Re 420 of the BLS.
  • Two-rail, direct current: since 1964 Trix has run on two-rail DC to NEM standards. The models run on analogue or DCC layouts and register via mfx in the märklin digital system.
  • Minitrix, N scale: launched in 1964, Minitrix covers 1:160: locomotives, coaches, wagons and a complete track system, also with concrete sleepers.
  • A Nuremberg house: grown out of the firm J. Hafner, founded in 1838, Trix has been part of the Märklin group since 1997.

Our favourites for a Swiss layout

Class Be 6/8 II "Crocodile" Electric Locomotive
Trix 25596 Scale H0
Class Be 6/8 II "Crocodile" Electric Locomotive

Prototype Electric locomotive, series Be 6/8 II "Krokodil" of the Swiss Federal Railways (SBB). Type from the first production series. Basic fir green paint scheme. With 2 cab doors, wide shunting steps on the engine hoods and bow-shaped grab rails, sleeve buffers, without transition plates, with a wrong-line signal and Signum-Integra magnets. Locomotive running number 13254. The locomotive looks as it did between 1960 and 1965. Model The locomotive has a digital decoder and extensive sound functions. It also has 2 regulated high-performance drives with flywheels, 1 motor in each drive bogie. 3 axles and a jackshaft powered in each. Traction tyres. Articulated running gear able to negotiate tight curves. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details. 3-part locomotive body with engine hoods that swing out. Detailed roof equipment with a safety grille below the pantographs. Length over the buffers 22.3 cm. Highlights Highly detailed metal version Prototypically adapted details with only 2 cab doors and wide shunting steps Locomotive with 2 high-performance drives and flywheels With a RailCom-capable DCC/mfx digital decoder and a variety of operating and sound functions

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 519.90 RRP CHF 559.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Class RABe 501 Giruno High-Speed Rail Car Train
Trix 25810 Scale H0
Class RABe 501 Giruno High-Speed Rail Car Train

Prototype EC 250 electric high-speed multiple unit as the RABe 501 "Giruno" of the Swiss Federal Railways (SBB). 1 end car A (Bt1), 2nd class. 1 intermediate car F (B7), 2nd class, with entrances for the handicapped and a pantograph. 1 intermediate car G (WR6), with a restaurant area. 1 intermediate car H (A5), 1st class, with entrances for the handicapped and a pantograph. 1 end car L (At2), 1st class. In use as a multi-system multiple unit between Zurich Airport and Basel as well as across the Alps through the Gotthard Base Tunnel as far as Milan. Approval also planned for Germany and Austria. Train number RABe 501 003, with the "San Gottardo" coat of arms. Current operating condition 2022. Model 5-part base set. The restaurant car G and the two intermediate cars F and H arranged to the left and right of it are permanently coupled to one another by means of the Jacobs bogies. The unit has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a flywheel, centrally mounted in the restaurant car. All 4 axles in both Jacobs bogies to the left and right of the restaurant car powered using cardan shafts. Traction tyres. The cabs in the end cars have interior details. Power supply by way of the leading end car, depending on the direction of travel. Guide mechanism in the Jacobs bogies. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. They can be changed over to a single white tail lamp (Swiss lighting changeover). Additional separately controllable light functions. Interior lighting fitted as standard. The interior lighting is supplied by way of the continuous electrical connection running through the whole train. In addition, the cab lighting and the driver's desk lighting can each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for all of the lighting. The pantographs on the intermediate cars F and H can each be raised and lowered separately as a digital function. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the base set approximately 112 cm. Highlights Completely new tooling True-to-scale reproduction 1:87. LED interior lighting fitted as standard Cab lighting and driver's desk lighting can be controlled digitally Pantographs on the intermediate cars F and H can be raised and lowered by means of a digital function Digital decoder with extensive light and sound functions Train number RABe 501 003, with the "San Gottardo" coat of arms Note The 5-part base set 25810 can be expanded with the 2-part add-on car sets 23281, 23282, and 23283 to make a prototypical 11-part multiple unit.

  • 2-rail, direct current
  • Sound

Selling price: CHF 725.20 RRP CHF 839.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Class Ae 6/8 Electric Locomotive
Trix 25680 Scale H0
Class Ae 6/8 Electric Locomotive

Prototype Electric locomotive Ae 6/8 of the Bern-Lötschberg-Simplon Railway (BLS). Locomotive from the 2nd production series. Basic dark brown paint scheme with black running gear. Version in the original condition with 2 pantographs and braking resistors in the engine room. With transition plates on the ends and a wrong-line signal. Signum-Integra magnet at locomotive end II. 4 engine room windows and a louvred ventilation grille on each side. Locomotive running number 207. The locomotive looks as it did in the late 1940s/early 1950s. Model The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Both outer driving wheelsets in each drive bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. The wrong-line signal can be controlled separately digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Additional cab lighting, driver's desk lighting and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Highly detailed metal version with many separately applied details. The minimum radius for operation is 360 mm. Brake hoses and imitation screw couplings are included. Length over the buffers 23.3 cm. Highlights Completely new tooling Locomotive from the 2nd production series with the locomotive number 207 Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab, driver's desk and engine room lighting can be controlled digitally With a buffer capacitor to bridge short sections without power Buffer height to NEM standards Note A matching goods wagon set can be found under item no. 46575 in the Märklin H0 assortment, with information about the DC wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 483.65 RRP CHF 569.00

In stock: 1 on the shelf, shipped within 1-3 days

Class Ae 8/14 Electric Locomotive, Road Number 11852
Trix 25590 Scale H0
Class Ae 8/14 Electric Locomotive, Road Number 11852

Prototype Heavy double electric locomotive Ae 8/14 "Landilok" of the Swiss Federal Railways (SBB). Basic dark green paint scheme. Version with 2 pantographs. Sleeve buffers with square buffer plates. Locomotive running number 11852. The locomotive looks as it did in the early 1970s. Model The locomotive has a digital decoder and extensive light and sound functions. There is a regulated high-performance motor with a flywheel in each locomotive half. 4 axles powered in each locomotive half. The triple headlights change over with the direction of travel and 1 white tail lamp will work in conventional operation and can be controlled digitally. They can be switched over to 1 red tail lamp when the locomotive is running alone. Double "A" light function. Maintenance-free warm white and red LEDs are used for the lighting. The wrong-line signal, cab lighting and engine room lighting can be controlled digitally. Close couplers guided in a slot at the ends of the locomotive, separable close coupler between the locomotive halves. Detailed roof equipment with roof lines, insulators and roof walks as well as scissors-type pantographs. Both pantographs can be raised and lowered digitally. The minimum radius for operation is 360 mm. The cut-outs in the front aprons next to the standard pocket can be closed with the filler pieces included. Brake hoses and imitation screw couplings are included. Length over the buffers 39.1 cm. Highlights Completely new tooling Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally Red permission-to-proceed signal can also be controlled digitally Buffer height to NEM standards

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 759.00 RRP CHF 789.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Class Re 4/4 II Electric Locomotive, 1st Production Run
Trix 25420 Scale H0
Class Re 4/4 II Electric Locomotive, 1st Production Run

Prototype Electric locomotive Re 4/4 II, 1st production series, of the Swiss Federal Railways (SBB). Pebble grey/blood orange basic paint scheme as the locomotive for the Swiss Express. Running number 11141. The locomotive looks as it did starting in 1975. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and, together with one white tail lamp (Swiss lighting changeover), will work in conventional operation and can be controlled digitally. The lighting can be switched over to one red tail lamp when the locomotive is running alone. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. The shunting, warning and wrong-line signals can be controlled digitally. The cab and engine room lighting can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Detailed roof fittings with a newly tooled scissors-type pantograph. Many separately applied details such as handrails and the reproduction of the automatic coupler including the transverse linkage. The buffer height conforms to NEM standards. Brake lines, sockets, filler pieces for the pilot and the complete automatic coupler are included as separate plug-in parts. Length over the buffers 17.8 cm. Highlights Completely new tooling in a highly detailed metal version For the "50 Years of the Swiss Express" anniversary. Newly tooled scissors-type pantograph Many separately applied details such as the reproduction of the automatic coupler Cab and engine room lighting can be controlled digitally Shunting, warning and wrong-line signals can also be controlled Close couplers with a guide mechanism With a digital decoder and a wide variety of light and sound functions DCC, mfx and RailCom capable The buffer height conforms to NEM standards. With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Swiss Express Passenger Car Set
Trix 23690 Scale H0
Swiss Express Passenger Car Set

Prototype Four type EW III standard coaches of the Swiss Federal Railways (SBB/CFF/FFS). One type AD half-luggage coach, 1st class, one type WR restaurant car and two type B high-capacity coaches, 2nd class. Pebble grey/blood orange basic paint scheme of the Swiss Express. Route: Genève-Lausanne-Bern-Zürich HB. Car numbers 1, 13 and 14. Restaurant car without a car number. The coaches look as they did starting in 1975. Model Completely new tooling for the EW III coach family. Multi-coloured interior details. All coaches with LED interior lighting fitted as standard. A buffer capacitor is installed in each coach to bridge over brief interruptions in power. Restaurant car with illuminated table lamps. One high-capacity coach has tail lighting fitted as standard. Equipped with separable, current-conducting close couplers. The interior lighting works in conjunction with the restaurant car; the specified vehicle sequence must be observed for this. There is a digital interface in the restaurant car for fitting a function decoder to control various light functions. Type-specific bogies, roof shapes, side walls and underframes with many applied details. Buffer height according to NEM. Separately applied vents, handrails, control lines and steps on the bogies. Printed destination boards and car numbers. Two plug-in transfer end doors, which were fitted on the prototype for transfer runs, are included with each coach. An imitation of an automatic coupler is also included with the coach with car number 14. All coaches individually packaged in additional outer packaging. The minimum radius for operation is 360 mm. Length over the buffers approx. 113.2 cm. Highlights Completely new tooling for the EW III coach family For the "50 years of the Swiss Express" anniversary. Multi-coloured interior details LED interior lighting fitted as standard with buffer capacitors One coach with built-in tail lighting Restaurant car with illuminated table lamps Restaurant car equipped with a digital interface Separable, current-conducting close couplers Many separately applied details Buffer height according to NEM

Selling price: CHF 339.15 RRP CHF 399.00

In stock: 3 on the shelf, shipped within 1-3 days

11% off the recommended price
Class Re 420 Electric Locomotive
Trix 16884 Scale N
Class Re 420 Electric Locomotive

Prototype Class Re 420 electric locomotive of the BLS, wheel arrangement Bo´Bo´, built starting in 1966 for the SBB. The locomotive looks as it did around 2017. Basic paint scheme in white aluminium, with square lamps and one single-arm pantograph. Use: Fast passenger trains. Model The locomotive has a built-in digital decoder and sound generator for operation with mfx and DCC. Motor with a flywheel, 4 axles powered, traction tyres. Headlights and tail lamps changing over with the direction of travel, with warm white LEDs (the tail signal can be switched over and turned off), cab lighting, can be controlled digitally. Length over the buffers 93 mm. Highlights Sound Cab lighting

  • Digital
  • Sound

Selling price: CHF 299.00 RRP CHF 339.00

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
Swiss Express Express Train Car Set Part 1
Trix 18720 Scale N
Swiss Express Express Train Car Set Part 1

Prototype 4 different express coaches of the types EW III of the Swiss Federal Railways (SBB) in the Swiss Express paint scheme, consisting of 1x 1st class with baggage compartment (AD), 1x express train restaurant car (WR) and 2x 2nd class (B). The coaches look as they did around 1975. Model With a guide mechanism for close couplers. Prepared for the later installation of interior lighting. Total length over the buffers 616 mm. The matching interior lighting: 66616 LED interior lighting.

Selling price: CHF 229.00 RRP CHF 269.00

In stock: 1 on the shelf, shipped within 1-3 days

All Trix items

Filter products
Passenger Train with a Freight Car
Trix Scale H0
Passenger Train with a Freight Car

Prototype One goods wagon and four passenger coaches of different types of the German Federal Railway (DB). One Gmms 44 covered van, one four-axle second class rebuilt coach with a baggage compartment BD4yge, two four-axle second class passenger coaches B4ye of the standard design, and one four-axle second class rebuilt coach B4yge. Train run: Frankfurt [M] – Gießen – Marburg – Biedenkopf – Siegen – Troisdorf – Köln. The passenger coaches are in a bottle green basic paint scheme. The Gmms 44 is in red brown. Model Each passenger coach has LED interior lighting and a buffer capacitor fitted as standard. The seating coaches are fitted with a total of 20 miniature figures from the Preiser company. Total length over the buffers approx. 103 cm. Highlights The passenger coaches have LED interior lighting and a buffer capacitor as standard Fitted with a total of 20 miniature figures from the Preiser company Train run: Frankfurt [M] – Gießen – Marburg – Biedenkopf – Siegen – Troisdorf – Köln One-time series The 23508 passenger train with a goods wagon is being produced in 2025 in a one-time series exclusively for Trix Club members only. Note The matching 66 002 steam locomotive is also being offered exclusively for Trix Club members only under item number 25660.

Regular price: Price to follow
Dom Pfeil / "Cathedral Arrow" Passenger Car Set
Trix 23628 Scale H0
Dom Pfeil / "Cathedral Arrow" Passenger Car Set

Prototype Three standard design express train passenger cars from 1928 to 1930 (usage group 29) of the German Federal Railroad (DB). Three type AB4ü-28 express train passenger cars, 1st/2nd class. Train route: Hannover - Hamm (W) – Wuppertal – Cologne as the F 14 "Dom-Pfeil" F-train. Basic steel blue paint scheme. The cars look as they did in 1952. Model Detailed version in full length scale. All cars with factory-installed LED interior lighting with warm white LEDs and a buffer capacitor. One car equipped at the factory with marker lights on one end. Passenger cars with multi-colored interior details. Heavy Görlitz II design trucks. Separately applied boarding ladders on the ends and applied grab irons. Minimum radius for operation 360 mm. Total length over the buffers approx. 75.5 cm / 29-3/4". Highlights Train route: Hannover - Hamm (W) – Wuppertal – Cologne as the F 14 "Dom-Pfeil" F-train. All cars with factory-installed LED interior lighting and a buffer capacitor One car with marker lights Multi-colored interior details Boarding ladders applied on the ends Separately applied grab irons at the entry doors Buffer height to NEM standards One-time series The passenger car set 23628 is being produced in 2026 in a one-time series exclusively for Trix Club members.

Regular price: CHF 303.00

Club members only (Trix Club)

Type Falns 182 Dump Car Set
Trix Scale H0
Type Falns 182 Dump Car Set

Prototype 6 four-axle, high-capacity, open self-unloading hopper wagons of the type Falns 182 of Deutsche Bahn AG (DB AG). Used to transport bulk goods that are not sensitive to moisture. Red brown basic paint scheme. All wagons with 2 transition platforms. 3 wagons with a hand brake on one transition platform and 3 wagons without a hand brake. Type 665 bogies. The wagons look as they did around 2015. Model Self-unloading hopper wagons in a true-to-scale and detailed version, with many applied details. 6 different running numbers. All wagons with 2 applied transition platforms each and 3 wagons with a hand wheel for the hand brake at wagon end 2. Prototypically, both long sides of the wagons are each without access holes on the upper body and without grab handles. Self-unloading hopper wagons loaded with load inserts and real coal. All wagons in the set individually packaged. Buffer height according to NEM. Length over the buffers per wagon 14.4 cm. AC wheelset per wagon E700150. Highlights New tooling for the Falns 182 self-unloading hopper wagons True-to-scale version in 1:87. Many applied details. 6 different running numbers Loaded with load inserts and real coal Ideal for block trains Buffer height according to NEM. Sold individually from a wagon set Note The matching heavy class 151 goods train electric locomotive can be found under item no. 25652, also in the Trix H0 range.

Regular price: Price to follow
Type OOt Oldenburg Dump Car Set
Trix 24266 Scale H0
Type OOt Oldenburg Dump Car Set

Prototype 10 four-axle high-capacity self-unloading hopper wagons of the type OOt Oldenburg of the Deutsche Reichsbahn-Gesellschaft (DRG). Version with a brake platform on the end and a hand wheel at one end of the wagon as well as with signal supports on the ends of the upper body. Representation of the radial axles. Used to transport coal. The wagons look as they did at the end of the 1920s / beginning of the 1930s. Model Detailed version of the visually striking rows of rivets and signal supports on the upper body. Imitation of the radial axles. Different running numbers. All wagons with a brake platform and a hand wheel on the end at one end of the wagon. Loaded with load inserts and real coal with a true-to-scale grain size. Length over the buffers per wagon 11.5 cm. AC wheelset per wagon E700150. Highlights New tooling for the OOt Oldenburg high-capacity self-unloading hopper wagon Detailed version of the striking rows of rivets Separately applied signal supports on the ends Load inserts loaded with real coal Many different running numbers In use for block trains Buffer height according to NEM One-time series The high-capacity self-unloading hopper wagon set will be produced in 2025 in a one-time series exclusively for Trix Club members. Note The matching heavy class E95 goods train electric locomotive is offered under item no. 25950 and a prototypically matching goods brake van under item no. 24987, also exclusively for Trix Club members in 2025.

Regular price: CHF 413.00

Club members only (Trix Club)

Type Sdggmrss Double Pocket Car
Trix Scale H0
Type Sdggmrss Double Pocket Car

Prototype 6-axle articulated double pocket wagon, type Sdggmrss, with curved side surfaces, of MFD Rail GmbH. Modern carrier wagon for combined freight traffic. Granite grey basic paint scheme. Version with four folding latches on the sides. The wagon looks as it did starting in 2021. Loaded with two curtain-side semi-trailers of the Mars haulage company. Model Both carrier wagon halves of metal, mounted so that they can move on the centre bogie. Folding latches on the sides fitted at the factory. They can be folded up for transporting containers or swap bodies. Many separately applied details such as the transition grating, steps, brake lines and grab rails at the wagon ends. Type Y25 bogies. Buffer height per NEM. A mount for a support trestle, holders for kingpins in high and low versions, shunting steps and air tanks for the wagon ends are included as separate plug-in parts. Loaded with two curtain-side semi-trailers of the Mars haulage company. Length over the buffers approx. 39.3 cm. AC wheelset E376938. Highlights Completely new tooling Detailed version largely of metal Folding latches fitted and functional Many separately applied details Buffer height per NEM. Loaded with two semi-trailers

Regular price: Price to follow
Type Sdggmrss Double Pocket Car
Trix Scale H0
Type Sdggmrss Double Pocket Car

Prototype 6-axle articulated double pocket wagon, type Sdggmrss (T3000e), of CFL Cargo. Modern carrier wagon for combined freight traffic. Pure green basic paint scheme. Version with four folding latches on the sides. The wagon looks as it did starting in 2021. Loaded with two curtain-side semi-trailers of the Mars haulage company. Model Both carrier wagon halves of metal, mounted so that they can move on the centre bogie. Folding latches on the sides fitted at the factory. They can be folded up for transporting containers or swap bodies. Many separately applied details such as steps, brake lines and grab rails at the wagon ends. Type Y25 bogies. Buffer height per NEM. Holders for kingpins in high and low versions, shunting steps and air tanks for the wagon ends are included as separate plug-in parts. Loaded with two curtain-side semi-trailers of the Mars haulage company. Length over the buffers approx. 39.3 cm. AC wheelset E376938. Highlights Detailed version largely of metal Folding latches fitted and functional Many separately applied details Buffer height per NEM. Loaded with two semi-trailers

Regular price: Price to follow
Trix H0 Tank Car
Trix 24780 Scale H0
Trix H0 Tank Car

Prototype 2-axle tank wagon with a hand brake platform and an access ladder at the end. Privately owned wagon of Damman & Lewens, Hamburg, registered with the German Federal Railway. The wagon looks as it did starting in 1965. Model Applied brake platform with an access ladder and a filling platform. Reproduction of the open-work wagon floor. Length over the buffers approx. 10.0 cm. AC wheelset E36667900. Note This tank wagon is produced exclusively for Trix Club members with 5 years of membership.

Regular price: CHF 27.90

Club members only (Trix Club)

Trix Club Track Cleaning Cars
Trix 24781 Scale H0
Trix Club Track Cleaning Cars

Prototype Pair of open wagons with hinged covers, type 927, permanently coupled, used as a permanent way vehicle. Ocean blue basic paint scheme. Era IV livery, around 1979. Model Both wagons with a rail cleaning device fitted. Each has a vertically movable metal block with cleaning surfaces of polishing felt fitted parallel to one another. The cleaning surfaces can be replaced and washed. The hinged covers can be opened. One wagon with a separately applied hand brake platform. Close couplers with a guide mechanism. Both wagons are joined by a plug-in coupler. Length over the buffers 15.3 cm. AC wheelset E700150. This gentle cleaning process is also suitable for rails of nickel silver or brass. One-time series The rail cleaning wagon is produced exclusively for Trix Club members with at least 10 years of membership.

Regular price: CHF 73.90

Club members only (Trix Club)

Trix Club Pocket Car
Trix 24782 Scale H0
Trix Club Pocket Car

Prototype Pocket wagon, type Sdgkms. Red brown basic paint scheme. Operating condition 2000. Loaded with a curtain-side semi-trailer in an attractive Trix livery. Model Frame, floor and load pockets of metal. Many applied details. Special bogies of low design. Rectangular buffers. The load holders are adjustable. Holders and a trailer support stand are included. Loaded with a curtain-side semi-trailer in an attractive Trix livery. Length over the buffers 19.0 cm. AC wheelset E321973. Highlights With an attractive load Detailed version largely of metal Many separately applied details One-time series The pocket wagon is produced exclusively for Trix Club members with at least 25 years of membership.

Regular price: CHF 68.90

Club members only (Trix Club)

Trix H0 Club Car 2026
Trix 24826 Scale H0
Trix H0 Club Car 2026

Prototype Beer refrigerator car as an insulated car of the German State Railroad (DR/Soviet Zone). Basic cream white paint scheme with advertising lettering on the sides for the Sächsische Union-Brauerei Aktiengesellschaft. The car looks as it did starting in 1948. Model Side walls with a horizontal board structure. Fixed cold room doors with steps below them. Length over the buffers 10.6 cm / 4-3/16". AC wheel set E700200. Highlights Attractive design as a beer car One-time series This item is being produced in 2026 in a one-time edition only for Trix Club members.

Regular price: CHF 24.10

Club members only (Trix Club)

Type Pwg Pr 14 Freight Train Baggage Car
Trix 24987 Scale H0
Type Pwg Pr 14 Freight Train Baggage Car

Prototype 2-axle goods brake van Pwg Pr 14 of the Deutsche Reichsbahn-Gesellschaft (DRG). With a roof lookout. With continuous running boards along the sides. The van looks as it did at the end of the 1920s. Model With a roof lookout and continuous running boards. The van in a brown green colour scheme. Signal supports with tail discs are included in a flat bag for retrofitting. Length over the buffers 9.6 cm. AC wheelset E700150. Highlights Version of the tooling for the first time with continuous running boards Signal supports with tail discs for retrofitting are included Prototypically matching rear vehicle for long coal trains One-time series The goods brake van is being produced in 2025 in a one-time series exclusively for Trix Club members only. Note The matching heavy class E95 goods train electric locomotive is offered under item number 25950, and a high-capacity self-unloading hopper wagon set under item number 24266, likewise exclusively for Trix Club members only in 2025.

Regular price: CHF 39.90

Club members only (Trix Club)

Class 59 Steam Locomotive
Trix Scale H0
Class 59 Steam Locomotive

Prototype Heavy class 59 goods train steam locomotive (former Württ. K) with a 2 2 T20 coal tender. German Federal Railway (DB). Basic black paint scheme with red running gear. Running number 59 032. Home station BD Stuttgart, Bw Plochingen. The locomotive looks as it did around 1949. Model The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. A frame chassis able to negotiate tight curves, with laterally movable axles. 6 axles powered. Traction tyres. The 7226 smoke unit can be installed in the locomotive. The dual headlights, which change over with the direction of travel, and the smoke unit that can be retrofitted will work in conventional operation and can be controlled digitally. The lighting uses maintenance-free warm white LEDs. It has a buffer capacitor. There is an adjustable close coupler between the locomotive and the tender. Piston rod protective sleeves, brake hoses, and imitation screw couplings are included separately. Length over the buffers 23.5 cm. Highlights Locomotive for the anniversary "175 Jahre Eröffnung Geislinger Steige". Steam locomotive built by Maschinenfabrik Esslingen for the Geislinger Steige Detailed version largely constructed of metal RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Prepared for the 7226 smoke unit With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Regular price: Price to follow
Class 06 Steam Locomotive
Trix 25061 Scale H0
Class 06 Steam Locomotive

Prototype 06 002 express steam locomotive of the German Federal Railroad (DB). In a fictitious version without the streamlined casing, with a 2'3 T38 coal tender, dual headlights, Witte smoke deflectors and Indusi on one side. Home depot Hamm. The locomotive looks as it did in 1952. Model With a digital decoder and extensive sound functions. Regulated high-performance motor with a flywheel in the boiler. One axle powered, three axles powered via side rods. Traction tires. Locomotive and tender made largely of metal. Factory-installed smoke generator with speed-dependent, dynamic smoke output. Dual headlights that change over with the direction of travel will work in conventional operation and can be controlled digitally. Cab lighting, firebox flickering and running gear lighting can be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Close coupling with a guide mechanism between the locomotive and tender. Close coupler with a guide mechanism and an NEM pocket on the tender. Buffer height on the locomotive and tender to NEM standards. Minimum radius for operation 437.5 mm. Can run on radius 1 with slight limitations. Piston rod protection sleeves and brake hoses are included. Length over the buffers approx. 31 cm. Highlights Faithful realization of a DB design for the use of the Class 06 without its streamlined casing Completely new tooling Newly designed running gear – runs through tight radii and turnout sequences without problems at slow speeds Model made largely of metal A multitude of applied details Finely detailed valve gear parts. Factory-installed smoke generator with speed-dependent, dynamic smoke output. With a buffer capacitor for bridging short sections without power Cab lighting can be controlled digitally. Firebox flickering can be controlled digitally Running gear lighting can be controlled digitally With a RailCom-capable DCC/mfx digital decoder with extensive light and sound functions Buffer height to NEM standards One-time series The 06 002 steam locomotive without streamlined casing is being produced in 2026 in a one-time series exclusively for Trix Club members.

  • 2-rail, direct current
  • Digital
  • Sound

Regular price: CHF 643.00

Club members only (Trix Club)

Class 146.5 Electric Locomotive
Trix Scale H0
Class 146.5 Electric Locomotive

Prototype Electric locomotive class 146.5 of the Deutsche Bahn AG (DB AG) for long-distance service. Dual-system locomotive from the TRAXX range of types (P 160 AC2). Light grey long-distance paint scheme with a traffic red decorative stripe, in the current IC design. Locomotive for the train run: IC 2045 from Cologne to Dresden Hbf. Locomotive running number 146 572-3. The locomotive looks as it did around 2020. Model The locomotive has a digital decoder and extensive sound functions. Various station announcements change with the direction of travel of the locomotive. A greeting for passengers who have boarded and train announcements for the next stop are likewise dependent on the direction of travel of the locomotive. Regulated high-performance motor with a flywheel, centrally mounted. 4 axles powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and, together with 2 red tail lamps, will work in conventional operation and can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. When the headlights are turned off at both ends of the locomotive, the double "A" light function works at both ends. Illuminated destination display "IC 2045 Dresden Hbf" on the ends above the cabs. Maintenance-free warm white and red LEDs are used for the lighting. Length over the buffers 21.7 cm. Highlights New prototypical train run: IC 2045 from Cologne to Dresden Hbf Train number 2873. Ideal locomotive for the IC2 double-deck coaches to make up correct 6-part train sets Digital decoder with extensive operating and sound functions With multiple train announcements for the next stop of the IC 2045 and IC 2046 when the direction of travel changes Note The matching IC2 double-deck coaches can also be found in the Trix H0 assortment under item nos. 23253, 23254, 23255, 23256 and 23257 to make up a prototypical 6-part train set.

  • 2-rail, direct current
  • Sound

Regular price: Price to follow
Class 52 Steam Locomotive
Trix Scale H0
Class 52 Steam Locomotive

Prototype Heavy goods train steam locomotive, class 52 with a tub-style tender 2´2´T30. Deutsche Reichsbahn (DR). Basic black-grey paint scheme. Without smoke deflectors. With frost protection cladding for the air pump and clad lubrication lines. Leading wheelset with solid wheels. Locomotive running number 52 1400. The locomotive looks as it did around 1943/44. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. 5 axles powered. Traction tyres. The locomotive and tub-style tender are largely constructed of metal. The 7226 smoke unit can be installed in the locomotive. The dual headlights change over with the direction of travel and the retrofittable smoke unit will work in conventional operation and can be controlled digitally. The cab lighting can also be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. Close coupler with a guide mechanism between the locomotive and tender. There is a close coupler with a guide mechanism and an NEM pocket at the rear of the tender and at the front of the locomotive, and the buffer height at the front is to NEM standards. The minimum radius for operation is 360 mm. Piston rod protective sleeves, brake hoses and imitation screw couplings are included. Length over the buffers 26.4 cm. Highlights Detailed version largely constructed of metal With prototypical frost protection cladding Buffer height at the front to NEM standards and with a flat coupler With a RailCom-capable DCC/mfx digital decoder and a variety of operating and sound functions Delicate running gear with a largely unobstructed view between the running gear and the boiler High-performance motor with a flywheel in the boiler Note A matching heavy-duty wagon set is available in the Märklin H0 assortment under item no. 48660, with information about the DC wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Regular price: Price to follow
Steam Locomotive 66 002
Trix Scale H0
Steam Locomotive 66 002

Prototype Passenger train tank locomotive, class 66 of the German Federal Railway (DB). Running number 66 002. The locomotive looks as it did in the mid 1960s. Gießen locomotive maintenance facility. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. One axle powered. Two axles powered by means of coupling rods. Traction tyres. The locomotive is largely constructed of metal. A smoke generator fitted as standard, with speed-dependent, dynamic smoke output. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. The cab lighting can also be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. The minimum radius for operation is 360 mm. Piston rod protective sleeves, brake hoses, steam heating lines and imitation screw couplings are included separately. Length over the buffers approximately 17 cm. Highlights Completely new tooling With a buffer capacitor to bridge short sections without power. Smoke generator as standard with speed-dependent, dynamic smoke output. Triple headlights changing over with the direction of travel and two red tail lamps Cab lighting can be controlled digitally Particularly delicate metal construction A multitude of applied details Buffer height to NEM standards. With a RailCom-capable DCC/mfx digital decoder One-time series The 66 002 steam locomotive is being produced in 2025 in a one-time series exclusively for Trix Club members. Note A matching coach set is being offered under item no. 23508, likewise exclusively for Trix Club members in 2025.

  • 2-rail, direct current
  • Digital
  • Sound

Regular price: Price to follow
US Shay Design Gear Drive Steam Locomotive
Trix Scale H0
US Shay Design Gear Drive Steam Locomotive

Prototype US geared steam locomotive, Shay type, Class D. Version with 4 drive bogies. Drive by means of crankshafts to universal shafts and by means of bevel gears to the bogies. With the boiler characteristically offset to the left. Used chiefly on American field and forest railways, on lines with tight curves and steep grades. Western Maryland locomotive number 5. The locomotive looks as it did in the 1940s. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. All of the axles in the 4 drive bogies on the locomotive and tender are powered by means of universal shafts and bevel gears. Traction tyres. Smoke unit fitted as standard. 1 headlight on the locomotive and tender, changing over with the direction of travel. The lighting changeover and the smoke unit will work in conventional operation and can be controlled digitally. The cab lighting can also be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. With a buffer capacitor. Standard coupler mountings with an NEM pocket, mounted on a pivot, at the rear of the tender and at the front of the locomotive. The minimum radius for operation is 360 mm. Engine driver and fireman in the cab. Length 25.2 cm. Highlights Completely new tooling Very detailed version, largely constructed of metal Visually impressive drive technology by means of universal shafts and bevel gears Boiler characteristically offset to the left RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions With a buffer capacitor to bridge short sections without power Smoke unit fitted as standard Engine driver and fireman in the cab New tooling for matching US flat cars for transporting timber under item no. 24922 Note A matching US flat car set is available in the Trix H0 assortment under item no. 24922. Another US flat car set with additional running numbers is available in the Märklin H0 assortment under item no. 45600, with a note about the replacement wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Regular price: Price to follow
Märklin Works Loco in Györ
Trix 25728 Scale H0
Märklin Works Loco in Györ

Prototype Class M28 diesel shunting locomotive as a works locomotive of the märklin plant in Györ, Hungary. Former shunting locomotive of the Hungarian State Railways (MÁV). Chrome oxide green basic paint scheme. Running number M28.1001. Current visually refurbished condition in the appearance of Era IV. Model With a digital decoder and extensive sound functions. Regulated high-performance drive. Both axles powered, one of them via the coupling rod. Traction tyres. Triple headlights that change over with the direction of travel will work in conventional operation and can be controlled digitally. Cab lighting and running gear lighting can be controlled digitally. Lighting with maintenance-free warm white LEDs. With a buffer capacitor. Telex coupling at the front and rear can be controlled digitally. Handrails and many other details are separately applied. Buffer height to NEM. Driver figure standing in the cab. Length over the buffers approx. 8.5 cm. Highlights Completely new tooling in a highly detailed metal version Telex couplings on both sides Coupler waltz Cab lighting and running gear lighting can be controlled digitally Many separately applied details With a driver figure standing in the cab DCC, mfx and RailCom-capable Buffer height to NEM. With a buffer capacitor for bridging short sections without power One-time series The Märklin works locomotive Györ will be produced in 2026 in a one-time series only for Trix Club members.

  • 2-rail, direct current
  • Digital
  • Sound

Regular price: CHF 349.00

Club members only (Trix Club)

Class 051 Steam Locomotive with a Cabin Tender
Trix Scale H0
Class 051 Steam Locomotive with a Cabin Tender

Prototype Class 051 goods train steam locomotive with a cabin tender, German Federal Railway (DB). Witte smoke deflectors, 4 boiler fittings, a shortened running board, DB reflex glass lamps, and Indusi on both sides. Running number 051 341-6. The locomotive looks as it did at the beginning of the 1970s. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. 5 axles powered. Traction tyres. The locomotive and tender are largely of metal. The 7226 smoke unit can be installed in the locomotive. The triple headlights change over with the direction of travel and they and the smoke unit that can be retrofitted will work in conventional operation and can be controlled digitally. The cab lighting can be controlled separately, digitally. Maintenance-free warm white LEDs are used for the lighting. There is a close coupler with a guide mechanism between the locomotive and the tender. There is a close coupler with a guide mechanism and an NEM pocket on the rear of the tender and on the front of the locomotive. The minimum radius for operation is 360 mm. Piston rod protective sleeves and brake hoses are included. Length over the buffers 26.5 cm. Highlights Detailed version largely of metal Open bar frame and many applied details High-performance motor with a flywheel in the boiler. Cab lighting can be controlled digitally RailCom-capable DCC/mfx digital decoder with extensive light and sound functions Note Suitable goods wagons for the class 051 goods train steam locomotive can be found in the Märklin H0 assortment, with information about the DC wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Regular price: Price to follow
Class E 95 Electric Locomotive
Trix Scale H0
Class E 95 Electric Locomotive

Prototype Heavy class E 95 goods train electric locomotive of the Deutsche Reichsbahn-Gesellschaft (DRG). For use pulling heavy coal block trains on the Silesian network. Blue grey basic paint scheme. For a long time this electric locomotive was the largest electric locomotive in Germany. Locomotive running number E 95 01. The locomotive looks as it did around 1928. Model The locomotive has a digital decoder and extensive light and sound functions. It also has 2 regulated high-performance drives with flywheels, 1 motor in each locomotive half. Both outer driving wheelsets in each driving wheel group powered. 2 traction tyres. Both locomotive halves are permanently coupled to one another by a connection guided in a slot. The dual headlights change over with the direction of travel, will work in conventional operation, and can be controlled digitally. In addition, a 3rd upper headlight as a train meeting light at the front in the direction of travel can be controlled separately, digitally. The cab lighting and the engine room lighting in each locomotive half can each be controlled separately, digitally. Maintenance-free warm white LEDs are used for the lighting. It has a buffer capacitor. A pantograph that can be raised and lowered in each locomotive half can be controlled separately, digitally. Highly detailed version largely of metal, with many separately applied details. Close couplers with guide mechanisms and NEM pockets at both ends of the locomotive. Buffer height per NEM. The minimum radius for operation is 360 mm. Brake hoses and imitation screw couplings are included for retrofitting. Length over the buffers 24.1 cm. Highlights Completely new tooling. Highly detailed metal version A multitude of applied details A high-performance motor with a flywheel in each locomotive half and 2 driving wheelsets powered in each half Pantographs can be raised and lowered digitally Cab lighting and engine room lighting can be controlled digitally With an air pump on the second locomotive half RailCom-capable DCC/mfx digital decoder with extensive light and sound functions Ideal locomotive for coal block trains with the newly tooled type OOt Oldenburg high-capacity self-unloading hopper wagons Buffer height per NEM. With a buffer capacitor to bridge short sections without power One-time series The class E 95 electric locomotive is being produced in 2025 in a one-time series exclusively for Trix Club members. Note A suitable self-unloading hopper wagon set with 10 newly tooled type OOt Oldenburg high-capacity self-unloading hopper wagons is being offered under item no. 24266 and a Pwg Pr 14 goods brake van under item no. 24987, likewise exclusively for Trix Club members in 2025. The coal block train can be expanded with a further 10 high-capacity self-unloading hopper wagons with the Märklin item 46226, with the required DC wheelsets exchanged.

  • 2-rail, direct current
  • Digital
  • Sound

Regular price: Price to follow
Trix Express Club Car 2026
Trix 33726 Scale Express
Trix Express Club Car 2026

Prototype Type Gs 210 2-axle boxcar of the German Federal Railroad (DB). Basic red-brown paint scheme. The car looks as it did starting in 1980. Model Car with couplers with a close coupler guide mechanism. Truss rods on the underside of the car. Length over the buffers 11.5 cm / 4-1/2". AC wheel set E700150. Trix H0 wheel set E700580. Highlights Trix Express Club annual car 2026 One-time series This item is being produced in 2026 in a one-time edition only for Trix Club members.

Regular price: CHF 24.10

Club members only (Trix Club)

Trix Club Track Cleaning Cars (Express)
Trix 33968 Scale Express
Trix Club Track Cleaning Cars (Express)

Prototype Pair of open wagons with hinged covers type 927, permanently coupled, used as a permanent way vehicle. Basic paint scheme in ocean blue. Era IV livery, around 1979. Model Both wagons have a rail cleaning device mounted on them. One vertically movable metal block each with parallel cleaning surfaces of polishing felt. The cleaning surfaces are replaceable and washable. The hinged covers can be opened. One wagon has a separately applied hand brake platform. Close couplers with a guide mechanism. Both wagons are connected with a plug-in coupler. Length over the buffers 15.3 cm. AC wheelset E700150. Trix H0 wheelset E700580. The gentle cleaning process is also suitable for rails made of nickel silver or brass. One-time series The rail cleaning wagon is being produced exclusively for Trix Club members with at least 10 years of membership.

Regular price: CHF 77.90

Club members only (Trix Club)

Trix (Express) Club Pocket Car
Trix 33969 Scale Express
Trix (Express) Club Pocket Car

Prototype Pocket wagon type Sdgkms. Basic paint scheme in red brown. The wagon looks as it did in 2000. Loaded with a curtain-side semi-trailer in an attractive Trix livery. Model Frame, floor and loading troughs of metal. Many applied details. Special bogies of a low design. Rectangular buffers. The load mounts are adjustable. Mounts and a trailer support are included. Loaded with a curtain-side semi-trailer in an attractive Trix livery. Length over the buffers 19.0 cm. AC wheelset E321973. Trix H0 wheelset E320577. Highlights With an attractive load Detailed version largely of metal Many separately applied details One-time series The pocket wagon is being produced exclusively for Trix Club members with at least 25 years of membership.

Regular price: CHF 73.90

Club members only (Trix Club)