Track System
Prototype The Märklin track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin flexible track with a length of 660 mm. New track with a prototypical grey concrete sleeper look, so that the current condition of railway tracks can also be reproduced. Flexible track by cutting open the sleeper strip. Shorten the rails and sleeper strips and fit new fishplates (8954). The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Quick setting up and taking down
In stock, shipped within 1-3 days
Flexible light railway track. Length 730 mm. Gauge: 9 mm. (Illustration shortened!)
In stock, shipped within 1-3 days
Flex track F4 with wooden sleepers. Length 920 mm. Please note: Each FlexTrack requires a track end piece on only one side. Laying tips: Flexible tracks can be bent to form curves of any radius down to R2 = 358 mm. In view of the fact that the two rails will differ in length depending on the radius, it is necessary to cut them to length (Roco 10900 craft saw). For laying the flex tracks you need track nails, rail connectors and sleeper end pieces. The latter contain the necessary cut-outs in the region of the rail fastenings and make it easier to join flex tracks to one another. The flex track rails are cut to length, then the last three sleepers are cut off the track and the sleeper end piece are pushed onto the rail profiles of the flex track to replace the last three sleepers.
In stock, shipped within 1-3 days
Prototype The Trix H0 track end with a buffer stop combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Mounted frame with a buffer beam. The rail profile runs out into the ballast bed. Length 80.5 mm. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on carpet
In stock, shipped within 1-3 days
Straight track. Length 50 mm.
In stock, shipped within 1-3 days
Prototype With LGB garden railway tracks, you can easily bring more dynamism to your layout. Simply plug them together and off you go. LGB tracks are made of brass and are therefore very robust and weatherproof. Nothing stands in the way of long-term outdoor use! Model Curves with radius R2 allow realistic operation with long trains. 12 tracks with radius R2 and an angle of 30° form a circle (360°). Highlights Extremely robust and step-resistant tracks Plastic sleepers with a true-to-original wood grain
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model With a removable manual control lever. Point curve 22° 30'. The curve corresponds to 2232. Length of the straight track 168.9 mm. The 75491 electromagnetic point motor can be plugged in. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
In stock, shipped within 1-3 days
Flex track F4 with concrete sleepers. Length 920 mm. Please note: Each FlexTrack requires a track end piece on only one side. Laying tips: Flexible tracks can be bent to form curves of any radius down to R2 = 358 mm. In view of the fact that the two rails will differ in length depending on the radius, it is necessary to cut them to length (Roco 10900 craft saw). For laying the flex tracks you need track nails, rail connectors and sleeper end pieces. The latter contain the necessary cut-outs in the region of the rail fastenings and make it easier to join flex tracks to one another. The flex track rails are cut to length, then the last three sleepers are cut off the track and the sleeper end piece are pushed onto the rail profiles of the flex track to replace the last three sleepers.
In stock, shipped within 1-3 days
Flex track, especially flexible. Length: 730 mm.
In stock, shipped within 1-3 days
Prototype With LGB garden railway tracks, you can easily bring more dynamism to your layout. Simply plug them together and off you go. LGB tracks are made of brass and are therefore very robust and weatherproof. Nothing stands in the way of long outdoor use! Model 82 mm long straight track. Highlights Extremely robust tracks that can withstand being stepped on Plastic sleepers with wood graining faithful to the original
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model With a removable manual control lever. Point curve 22° 30'. The curve corresponds to 2232. Length of the straight track 168.9 mm. The 75491 electromagnetic point motor can be plugged in. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
In stock, shipped within 1-3 days
Prototype The Märklin curved point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin right curved point with an inner curve R1 of 360 mm / 30°. Outer curve: 30° at a parallel circuit spacing of 77.5 mm. With a manual control lever. The 74491 electric point motor, the 74462 digital decoder and the 74470/74471 point lanterns can be retrofitted. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock, shipped within 1-3 days
Prototype The Märklin track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin curved track, radius 220 mm. 30°. The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Quick setting up and taking down
In stock, shipped within 1-3 days
Flexible narrow gauge track. Length 730 mm. Gauge: 9 mm.
In stock, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix left-hand point 30°/24°. Straight track 104.2 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curve radius = R 1 - 24° or, with a 6° track plugged on, = R 1- 30°. Stop-point function optional. An electromagnetic drive can be fitted later. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock, shipped within 1-3 days
Point lantern, left
In stock, shipped within 1-3 days
Curved PROFI track with ballast bed, radius 356.5 mm (R1), curve angle 18°, outside diameter 746 mm. 20 pieces form a circle; corresponds to half of track 6120.
In stock, shipped within 1-3 days
Prototype The Märklin curved point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin left curved point with an inner curve R1 of 360 mm / 30°. Outer curve: 30° at a parallel circuit spacing of 77.5 mm. With a manual control lever. The 74491 electric point motor, the 74462 digital decoder and the 74470/74471 point lanterns can be retrofitted. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock, shipped within 1-3 days
Prototype The Märklin point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin slim right point with a length of 236.1 mm. Branch track radius 1114.6 mm. Point curve 12.1°. Common crossing 10° made of metal. Two 24071 tracks are required at the end of the point; a matching ballast base piece is included. With a manual control lever. The 74491 electric point motor, the 74470/74471 point lanterns and the 74462 digital decoder can be retrofitted. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock, shipped within 1-3 days
Prototype Märklin track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals alike. Model The Märklin 8500 track in Z gauge is a straight track 25 mm long and impresses with a combination of robustness, reliable current transmission and a prototypical appearance. Thanks to the proven click connection, track layouts can be set up and taken down in no time at all - stable, durable and extendable as desired. The Märklin track system thus offers the perfect basis for beginners as well as for experienced model railway enthusiasts in 1:220 scale. Highlights Straight track 8504 (Z gauge) 25 mm long - ideal for building and extending layouts Stable click connection - simple, fast and secure connecting Robust and electrically reliable - for lasting play and layout operation Prototypical appearance - for realistic and true-to-detail model railway design
In stock, shipped within 1-3 days
Prototype Märklin track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals alike. Model Märklin curved track with a radius of 195 mm. 45°. The click connection with the "Click". Set up and taken down in no time at all. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Fast setting up and taking down
In stock, shipped within 1-3 days
Prototype The Märklin track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin straight adjustment track, extendable with a length of 100-120 mm. For compensating length. The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Quick setting up and taking down
In stock, shipped within 1-3 days
Curved track R2. Radius 358 mm, arc angle 7.5°. Short compensation piece for the use of the geoLine tracks on NOCH layouts.
In stock, shipped within 1-3 days
Curved track R3. Radius 434.5 mm, arc angle 7.5°. Short compensation piece for the use of the geoLine tracks on NOCH layouts.
In stock, shipped within 1-3 days