Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB
← Spörle-Formen, the full range

Spörle-Formen · Bridges and viaducts

Town viaducts, arch bridges and abutments

The “Bilk” brick viaduct in a low or high version, the “Dresden” and “Berlin” arch bridges, abutments, culverts and a brass plate-girder bridge.

  • 72 mmlow Bilk, track over road
  • 96 mmhigh Bilk, track over track
  • 1 or 2tracks, road or rail
Spörle-Formen “Bilk” brick viaduct cast in plaster

The system

The “Bilk” viaduct is based on the brick railway embankments of the Bilk district, south of Düsseldorf: turn-of-the-century architecture, lightly weathered. The piers slot into the walls, but the profiles only fit together within the same series, low or high.

  • Low Bilk: 139 × 72 mm walls, vault with shop or in brick, three piers.
  • High Bilk: 140 × 96 mm walls, two piers and a portal.
  • Walls 4016 and 5016 with straight edges serve as abutments and as the inside of an underpass.

Low “Bilk” viaduct, 72 mm

  • 139 × 72 mm

The viaduct that carries the track over the street. Set 4000 brings together four moulds: two walls, a vault and the three piers.

Set “Bilk, railway over road” 72 mm high, consisting of 4 moulds (silicone moulds)
Spörle-Formen 4000
Set “Bilk, railway over road” 72 mm high, consisting of 4 moulds (silicone moulds)

Silicone mould set “Bilk, railway over road” 72 mm high, consisting of 4 moulds. Form 4010, brick wall with sandstone blocks, 139 x 72 mm. Form 4013, arched wall with shop front, 139 x 72 mm. Form 4014, arched wall with brick wall, 139 x 72 mm. Form 4020, 3 pillars, 87 mm high, width 17, 23 and 35 mm.

Regular price: CHF 79.00

In stock: 1 on the shelf, shipped within 1-3 days

Bilk low, brick wall with sandstone blocks approx. 139 x 72 mm (silicone mould)
Spörle-Formen 4010
Bilk low, brick wall with sandstone blocks approx. 139 x 72 mm (silicone mould)

Silicone mould “Bilk low” brick wall with sandstone blocks approx. 139 x 72 mm.

Regular price: CHF 21.00

On order, shipped within 10-15 days

Bilk low, supporting arch with shop fitting approx. 139 x 72 mm (silicone mould)
Spörle-Formen 4013
Bilk low, supporting arch with shop fitting approx. 139 x 72 mm (silicone mould)

Silicone mould “Bilk low” support arch with shop fitment approx. 139 x 72 mm.

Regular price: CHF 23.00

On order, shipped within 10-15 days

Bilk low, supporting arch brick approx. 139 x 72 mm (silicone mould)
Spörle-Formen 4014
Bilk low, supporting arch brick approx. 139 x 72 mm (silicone mould)

Silicone mould “Bilk low” supporting arch brick approx. 139 x 72 mm.

Regular price: CHF 23.00

On order, shipped within 10-15 days

Bilk low, split retaining wall with straight side profile approx. 139 x 72 mm (silicone mould)
Spörle-Formen 4016
Bilk low, split retaining wall with straight side profile approx. 139 x 72 mm (silicone mould)

Silicone mould “Bilk low” split retaining wall with straight side profile approx. 139 x 72 mm. for the interior construction of open arches, underpasses and bridgeheads.

Regular price: CHF 21.00

On order, shipped within 10-15 days

Bilk low (railway over road) 3 pillars 87 mm high, width 17, 23 and 35 mm (silicone mould)
Spörle-Formen 4020
Bilk low (railway over road) 3 pillars 87 mm high, width 17, 23 and 35 mm (silicone mould)

Silicone mould “Bilk low” (railway over road) 3 pillars 87 mm high, width 17, 23 and 35 mm.

Regular price: CHF 25.00

In stock: 1 on the shelf, shipped within 1-3 days

High “Bilk” viaduct, 96 mm

  • 140 × 96 mm

To carry one track over another. Set 5000 brings together five moulds; portal 5015 is sold separately. Remove a slice at the top or bottom to turn it into a road underpass.

Set "Bilk, railway over railway" 96 mm high, consisting of 5 moulds (silicone moulds)
Spörle-Formen 5000
Set "Bilk, railway over railway" 96 mm high, consisting of 5 moulds (silicone moulds)

Silicone mould set “Bilk, railway over railway” 96 mm high, consisting of 5 moulds. Form 5010, brick wall with sandstone blocks 140 x 96 mm. Form 5013, arched wall with shop front, 140 x 96 mm. Form 5014, arched wall with brick wall, 140 x 96 mm, possibly plastered. Form 5016, split wall with straight sides for interior finishing. Form 5020, two pillars 110 x 23 and 35 mm wide. The images of the forms can be found under the individual forms from this set.

Regular price: CHF 99.00

In stock: 1 on the shelf, shipped within 1-3 days

Bilk, railway over railway, brick wall with sandstone blocks 140 x 96 mm (silicone mould)
Spörle-Formen 5010
Bilk, railway over railway, brick wall with sandstone blocks 140 x 96 mm (silicone mould)

Silicone mould “Bilk, railway over railway” brick wall with sandstone blocks 140 x 96 mm. Form 5010, brick wall with sandstone blocks 140 x 96 mm.

Regular price: CHF 22.00

On order, shipped within 10-15 days

Bilk, railway over railway, retaining wall / vaulted arch with shopfront, 140 x 96 mm (silicone mould)
Spörle-Formen 5013
Bilk, railway over railway, retaining wall / vaulted arch with shopfront, 140 x 96 mm (silicone mould)

Silicone mould “Bilk, railway over railway” retaining wall/vaulted arch with shopfront, 140 x 96 mm.

Regular price: CHF 25.00

On order, shipped within 10-15 days

Bilk, railway over railway, retaining wall / vaulted arch with brick wall, 140 x 96 mm (silicone mould)
Spörle-Formen 5014
Bilk, railway over railway, retaining wall / vaulted arch with brick wall, 140 x 96 mm (silicone mould)

Silicone mould “Bilk, railway over railway” retaining wall/vaulted arch with brick wall, 140 x 96 mm. It can be plastered, the wall can be broken through to create an open design, or it can be used as a bridge arch.

Regular price: CHF 25.00

On order, shipped within 10-15 days

Bilk, railway over railway, portal, passage or bridge bearing (silicone mould)
Spörle-Formen 5015
Bilk, railway over railway, portal, passage or bridge bearing (silicone mould)

Silicone mould “Bilk, railway over railway” portal, passage or bridge bearing. This portal is an accessory for “Bilk 5000” and can also be used to build a tower or monument. Portal external dimensions: height = 116 mm, width = 76 mm. Portal opening dimensions: clear height = 53 mm, width = 37 mm.

Regular price: CHF 20.00

In stock: 1 on the shelf, shipped within 1-3 days

Bilk, railway over railway, split brick wall with straight sides for interior detailing (silicone mould)
Spörle-Formen 5016
Bilk, railway over railway, split brick wall with straight sides for interior detailing (silicone mould)

Silicone mould “Bilk, railway over railway” split brick wall with straight sides for interior detailing. Like 5010 but the base and wall are separate and there is no pillar profile on the sides.

Regular price: CHF 25.00

On order, shipped within 10-15 days

Bilk, railway over railway, two pillars approx. 115 mm high, 24 and 35 mm wide (silicone mould)
Spörle-Formen 5020
Bilk, railway over railway, two pillars approx. 115 mm high, 24 and 35 mm wide (silicone mould)

Silicone mould “Bilk, railway over railway” two pillars approx. 115 mm high, 24 and 35 mm wide.

Regular price: CHF 22.00

On order, shipped within 10-15 days

Arch bridges and culverts

  • Dresden: 6 moulds
  • Berlin: 4 moulds

The “Dresden” bridge, inspired by the Augustusbrücke, carries a road or a single or double track over as many arches as you like, with piers founded in the river. The “Berlin” bridge is its single-arch cousin, and can be combined with the high Bilk. Mould 8201 gives a road portal and a culvert; construction aids 7501 serve as a template for the deck and the round piers.

Set “Dresden Bridge” (silicone moulds)
Spörle-Formen 8000
Set “Dresden Bridge” (silicone moulds)

Forms Set "Dresden Bridge". Consisting of 8001, 8002, 8003, 8004, 8005, 8006. The bridge can be designed variably in length (number of arches) and in width. “Dresden” can be used as a road bridge or railway bridge (single or double track). The inner arch of the bridge has a masonry structure.

Regular price: CHF 129.00

In stock: 1 on the shelf, shipped within 1-3 days

Set “Berlin Bridge” (silicone moulds)
Spörle-Formen 8100
Set “Berlin Bridge” (silicone moulds)

Forms Set “Berlin Bridge” 4 forms consisting of 8101, 8102, 8001, 8004. Can be combined with the city viaduct "high Bilk (5000)".

Regular price: CHF 85.00

In stock: 1 on the shelf, shipped within 1-3 days

Dresden Bridge, inner ceiling (silicone mould)
Spörle-Formen 8001
Dresden Bridge, inner ceiling (silicone mould)

Silicone mould “Dresden Bridge” ceiling This form is also required for the “Bilk” bridge. Dimensions: length 131 x width 63 x height 40 mm.

Regular price: CHF 39.00

On order, shipped within 10-15 days

Dresden Bridge, archway (silicone mould)
Spörle-Formen 8002
Dresden Bridge, archway (silicone mould)

Silicone mould “Dresden Bridge” archway. Width 180 mm, height 100 mm. Clearance: height 60 mm, width 125 mm.

Regular price: CHF 25.00

On order, shipped within 10-15 days

Dresden Bridge, piers (silicone mould)
Spörle-Formen 8003
Dresden Bridge, piers (silicone mould)

Silicone mould “Dresden Bridge” piers. 2 pillars: width 18/30 mm, height 100 mm.

Regular price: CHF 19.00

On order, shipped within 10-15 days

Dresden Bridge, substructure (silicone mould)
Spörle-Formen 8004
Dresden Bridge, substructure (silicone mould)

Silicone mould “Dresden Bridge” substructure. This mould is also required for the “Bilk” bridge. Dimensions: width 63 mm, height 39/33 mm, depth approx. 20 mm.

Regular price: CHF 19.00

On order, shipped within 10-15 days

Dresden Bridge, wall (silicone mould)
Spörle-Formen 8005
Dresden Bridge, wall (silicone mould)

Silicone mould “Dresden Bridge” wall Width 148 mm, height 100 mm.

Regular price: CHF 20.00

On order, shipped within 10-15 days

Dresden Bridge, pier substructure (silicone mould)
Spörle-Formen 8006
Dresden Bridge, pier substructure (silicone mould)

Silicone mould “Dresden Bridge” pier substructure. Dimensions: width 80 mm, length 150 mm, height 18 mm.

Regular price: CHF 29.00

On order, shipped within 10-15 days

Bilk Bridge, arch (silicone mould)
Spörle-Formen 8101
Bilk Bridge, arch (silicone mould)

Silicone mould “Bilk Bridge” archway Dimensions: height 92 mm, width 140 mm. Surface: as “Bilk viaduct 5000”. Can be combined with the “high Bilk (5000)” city viaduct.

Regular price: CHF 23.00

On order, shipped within 10-15 days

Bilk Bridge, side panels (silicone mould)
Spörle-Formen 8102
Bilk Bridge, side panels (silicone mould)

Silicone mould “Bilk Bridge” side parts. Surface: as “Bilk viaduct 5000”. Can be combined with the city viaduct “high Bilk (5000)”.

Regular price: CHF 23.00

On order, shipped within 10-15 days

Bridge construction “stream culvert and road portal” (silicone mould)
Spörle-Formen 8201
Bridge construction “stream culvert and road portal” (silicone mould)

Silicone mould for bridge construction “stream culvert and road portal”. Form 1: road portal, width = 100 mm, height = 75 mm, portal internal height = 30 mm, internal width = 57 mm. Form 2: stream culvert, width = 108 mm, height = 42 mm, portal internal height = 20 mm, internal width = 29 mm. Form 1: road portal, width = 100 mm, height = 75 mm, portal internal height (break out web) = 60 mm, internal width = 57 mm.

Regular price: CHF 24.00

In stock: 1 on the shelf, shipped within 1-3 days

Design aids for town planning, bridges and pillars
Spörle-Formen 7501
Design aids for town planning, bridges and pillars

Design aids for town planning, bridges and pillars. The four triangles are designed to provide stability and angular accuracy when building houses or walls that require right-angled construction (7110). The large rectangle serves as the upper cover / running surface for bridges (8000, 8100). The round part with masonry can be used, for example, for bay windows on the bridge (8000). The round ring is used, among other things, for constructing a round pillar. Two small squares and two elongated rectangles are used as shims or for height adjustment.

Regular price: CHF 18.20

On order, shipped within 10-15 days

Abutments, piers and steel bridge

  • 90 × 72 × 17 mm

Four 90 × 72 mm abutments, in brick, stone, concrete or render: two pieces back to back make a pier. Plate-girder bridge 9000 is a kit in etched brass with real round rivets, for experienced modellers.

Bridgehead and pier, surface: brick masonry (silicone mould)
Spörle-Formen 8301
Bridgehead and pier, surface: brick masonry (silicone mould)

Silicone mould “bridgehead and pier” surface: brick masonry. Dimensions: height 90 mm, width 72 mm, thickness 17 mm. Surface: brickstones inside and smooth wall stones outside. 2 moulds back to back = pillar.

Regular price: CHF 19.00

In stock: 1 on the shelf, shipped within 1-3 days

Bridgehead and pier, surface: masonry (silicone mould)
Spörle-Formen 8302
Bridgehead and pier, surface: masonry (silicone mould)

Silicone mould “bridgehead and pier” surface: masonry stone. Dimensions: height 90 mm, width 72 mm, thickness 17 mm. Surface: small stone blocks inside and large stone blocks outside. 2 moulds back to back = pillar.

Regular price: CHF 19.00

In stock: 1 on the shelf, shipped within 1-3 days

Bridgehead and pier, surface: concrete structure (silicone mould)
Spörle-Formen 8303
Bridgehead and pier, surface: concrete structure (silicone mould)

Silicone mould “bridgehead and pier” surface: concrete structure. Dimensions: height 90 mm, width 72 mm, thickness 17 mm. Surface: concrete structure. 2 moulds back to back = pillars.

Regular price: CHF 19.00

In stock: 1 on the shelf, shipped within 1-3 days

Bridgehead and pier, surface: plaster, rounded stone (silicone mould)
Spörle-Formen 8304
Bridgehead and pier, surface: plaster, rounded stone (silicone mould)

Silicone mould “bridgehead and pier” surface: plaster, round stone wall. Dimensions: height 90 mm, width 72 mm, thickness 17 mm. Surface: crumbling plaster inside, rounded stone masonry outside. 2 moulds back to back = pillar.

Regular price: CHF 19.00

In stock: 1 on the shelf, shipped within 1-3 days

Kit for a solid-web girder bridge
Spörle-Formen 9000
Kit for a solid-web girder bridge

Kit solid-web girder bridge. Brass parts are stamped and embossed, with “proper” round rivet heads. A demanding kit for experienced modellers, which can be soldered or glued, but it is better to solder all the parts. Marc Heckmann, known from many publications, already published a detailed description of this bridge in EK 12/2007, explaining the assembly very well step by step.

Regular price: CHF 98.00

In stock: 1 on the shelf, shipped within 1-3 days

Workshop tip

Join walls and piers with a thin layer of filler pressed in and then smoothed: no seam, and the assembly can still be taken apart. Paint a test piece first, and blacken the hidden faces before fitting so that no white shows through.