Spörle-Formen · Roads and cobblestones
Town streets and country roads
Even or bumpy cobblestones, cracked asphalt, pavements and junctions: from the suburban street to the village road, everything is cast in plaster and joins without a seam.
- 88 mmtown street
- 66 mmtwo-lane country road
- 115 to 1500 mmcurve radii

The system
Two widths sit side by side: the town street, about 88 mm wide and cambered by about 4 mm at the centre, and the country or village road, about 66 mm wide. Each curve has its matching pair of pavements, and the junctions fit into the gutter of the cross street so that cobblestone meets cobblestone.
- Town pavements 30 mm wide and about 3 mm high, which can be narrowed as you wish.
- Town curves with a centre-line radius of 115 and 250 mm, then 400, 600, 900 and 1500 mm in fine cobblestones.
- Country curves with radii of 125, 260 and 700 mm.
- Mould 1005, cobblestones without camber, is used for squares and ramps and to widen a street.
Cobbled town streets
- 88 mm
- radii from 115 to 1500 mm
Straight streets with or without a manhole cover, very bumpy cobblestones for a suburban street of the steam eras, curves of every size. Sets 2000, 2001 and 2003 bring together the moulds for a whole neighbourhood: set 2000 gives around fifteen pieces, streets, curves, a junction and pavements.
Silicone mould set “city street cobblestone approx. 88 mm wide”, 10 moulds. City and industry, with pavements, gutters and a crossing. The ten forms of the large road construction set yield sixteen road and pavement sections. Forms: 1000, 1001, 1005, 1022, 1023, 1060, 1064, 1072, 1073, 1083. Form 1000, straight road, cobblestone, with manhole cover, 88 x 148 mm. Form 1001, straight road, cobblestone, without manhole cover. Form 1005, uneven cobblestone, without curvature, for squares and ramps. Form 1022, curved road, cobblestone, centre radius R = 115 mm. Form 1023, curved road, cobblestone, centre radius R = 250 mm. Form 1083, 1 cobblestone crossing, 1 straight pavement with driveway entrance, straight slabs, pair. Form 1060, 2 straight pavements, straight laid slabs, with rounded corners, pair. Form 1064, 2 straight pavements, slabs 1x straight 1x diagonal without rounding. Form 1072, 2 curved pavements, straight laid slabs, to centre radius R = 115 mm, pair. Form 1073, 2 curved pavements, straight laid slabs, to centre radius R = 250 mm, pair.
In stock: 2 on the shelf, shipped within 1-3 days
Silicone mould set “city street cobblestone approx. 88 mm wide”, 5 moulds. City and industry, with pavements, gutters and a crossing. The five forms produce eight road and pavement sections. Forms: 1000, 1022, 1060, 1072, 1083. 1000, straight road, cobblestone, with manhole cover, 88 x 148 mm. 1022, curved road, cobblestone, centre radius R = 115 mm. 1060, 2 straight pavements, slabs laid straight, with rounding pair. 1072, 2 curved pavements, slabs laid straight, to small radius pair. 1083, 1 cobblestone crossing, 1 straight pavement with courtyard entrance, slabs straight, pair.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould set “City street cobblestone” approx. 88 mm wide, without pavements, 3 moulds. For wide roads without pavements; includes one straight and two curved road sections. Moulds: 1000, 1022, 1023. 1000, straight road, cobblestone, with manhole cover, 88 x 148 mm. 1022, curved road, cobblestone, centre radius R = 115 mm. 1023, curved road, cobblestone, centre radius R = 250 mm. Further illustrations show application examples.
In stock: 1 on the shelf, shipped within 1-3 days
Mould “straight road” cobblestones with manhole cover, approx. 88 mm wide. Dimensions: approx. 146 mm long, approx. 88 mm wide. Cobblestone, cambered road with a central manhole cover.
On order, shipped within 10-15 days
Silicone mould for “straight cobblestone road” approx. 88 mm wide without manhole cover in the centre. Dimensions: approx. 146 mm long, approx. 88 mm wide. Cobblestone, cambered road without a manhole cover in the middle.
On order, shipped within 10-15 days
Silicone mould for a “straight road”, approx. 88 mm wide, cobblestone surface, very bumpy, with a kerb drain without a manhole cover. Dimensions: approx. 146 mm long, approx. 88 mm wide. Cobblestone – very bumpy, cambered road without a manhole cover in the middle.
On order, shipped within 10-15 days
Silicone mould “cobblestone” uneven, without curvature, for squares and ramps, approx. 88 x 128 mm.
On order, shipped within 10-15 days
Silicone mould “road curve”, fine cobblestone, channel gullies, centre radius R = 115 mm. Dimensions: 1022, silicone mould “road curve”, centre radius R = 115 mm, outer curve dimension = approx. 120 mm, inner curve dimension = approx. 50 mm, angle approx. 45°, upper offset dimension approx. 115 mm, lower offset dimension approx. 50 mm. Can be supplemented with mould 1072, pavements right and left.
On order, shipped within 10-15 days
Silicone mould “road curve”, fine cobblestone, channel gullies, centre radius R = 250 mm. Dimensions: 1023, silicone mould “road curve”, centre radius R = 115 mm, outer curve length = approx. 130 mm, inner curve length = approx. 95 mm, angle approx. 24°, upper offset approx. 130 mm, lower offset approx. 95 mm. Can be supplemented with mould 1073, pavements right and left.
On order, shipped within 10-15 days
Silicone mould for “road curve”, fine cobblestone, channel gullies, centre radius R = 400 mm. Dimensions: 1026, silicone mould “road curve”, centre radius R = 400 mm, angle approx. 22°, upper offset approx. 142 mm, lower offset approx. 114 mm. Can be supplemented with mould 1076, pavements on the right and left.
On order, shipped within 10-15 days
Silicone mould “road curve”, fine cobblestone, kerb gullies, centre radius R = 600 mm. Dimensions: 1027, silicone mould “road curve”, centre radius R = 600 mm, outer curve dimension = approx. 150 mm, inner curve dimension = approx. 125 mm, angle approx. 13°, upper offset dimension approx. 150 mm, lower offset dimension approx. 125 mm. Can be extended with mould 1077, pavements on the right and left.
On order, shipped within 10-15 days
Silicone mould “curved road section”, 88 mm wide, fine cobblestone, channel gullies, centre radius R = 900 mm. Dimensions: 1028, silicone mould “curved road section”, centre radius R = 900 mm, outer curve dimension = approx. 145 mm, inner curve dimension = approx. 130 mm, angle approx. 10°, upper offset dimension approx. 145 mm, lower offset dimension approx. 130 mm. Can be supplemented with mould 1078, pavements on the right and left.
On order, shipped within 10-15 days
Silicone mould for a road curve, approx. 88 mm wide, fine cobblestone, kerb gullies, centre radius R = 1500 mm. Dimensions: 1029, silicone mould “curved road section”, centre radius R = 1500 mm, outer arc length = approx. 145 mm, inner arc length = approx. 137 mm, angle approx. 4°, upper offset approx. 145 mm, lower offset approx. 135 mm. Can be supplemented with the 1079 mould for pavements on the right and left.
On order, shipped within 10-15 days
Asphalt streets
- 88 mm
The same town streets, covered in asphalt with cracks and patches. Set 2004 brings together three of these moulds; pavements 1072 and 1073 connect to them.
Silicone mould set “city street tarmac surface approx. 88 mm wide”, 3 moulds as 2003, but with tarmac surface. . Moulds: 1010, 1032, 1033. 1010 straight tarmac road, with damage and cracks, with manhole cover, 88 x 148 mm. 1032 curved tarmac road, centre radius approx. 115 mm. 1033 curved tarmac road, centre radius approx. 250 mm. Moulds 1072 and 1073 are required for the pavements.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould for a “straight tarmac road”, with potholes and cracks, with manhole cover, approx. 88 x 146 mm.
On order, shipped within 10-15 days
Silicone mould for a “curved tarmac road” with damage and cracks, centre radius approx. 115 mm. Dimensions: 1032, silicone mould “road curve”, centre radius R = 115 mm, outer curve length = approx. 135 mm, inner curve length = approx. 95 mm, angle approx. 45°, upper offset approx. 115 mm, lower offset approx. 50 mm. 1010, straight tarmac road, with damage and cracks, with manhole cover, 88 x 148 mm. 1060, 1064, various straight pavements with slab paving. 1033, curved tarmac road, centre radius approx. 250 mm. 1073, 2 curved pavements, slabs laid straight, R 250 suitable for 1033. 1072, 2 curved pavements, slabs laid straight, R 115 suitable for 1032. Alternatively, the pavements are also available without slabs with a sand finish: 1065, 1075.
On order, shipped within 10-15 days
Silicone mould for a “curved tarmac road” with damage and cracks, centre radius approx. 250 mm. Dimensions: 1033, silicone mould “road curve”, centre radius R = 250 mm, outer curve dimension = approx. 130 mm, inner curve dimension = approx. 95 mm, angle approx. 4°, upper offset dimension approx. 130 mm, lower offset dimension approx. 95 mm. For the pavement sections shown in the image, you will additionally need mould 1073.
On order, shipped within 10-15 days
Silicone mould, tarred crossing, straight pavement with yard entrance, slabs at an angle.
On order, shipped within 10-15 days
Pavements and junctions
- 30 mm wide
Each street curve has its two pavements: 1072 for curve 1022, 1073 for 1023, and so on up to 1079. Straight or angled slabs, sand paths, cobbled or asphalt junctions with a courtyard entrance.
Silicone mould “2 straight pavements”, slabs laid straight, with rounded edges.
On order, shipped within 10-15 days
Silicone mould “2 straight pavements”, slabs laid diagonally, with rounded edges. Version as 1060, but with slabs laid diagonally.
On order, shipped within 10-15 days
Silicone mould “2 straight pavements”, 1x straight slab paving, 1x diagonal slab paving.
On order, shipped within 10-15 days
Silicone mould “2 straight footpaths”, sandy paths with kerb edge. Version as per 1060, but without slab paving.
On order, shipped within 10-15 days
Silicone mould, 2 curved walkways, straight-laid slabs, R 115 compatible with 1022.
On order, shipped within 10-15 days
Silicone mould, 2 curved walkways, straight-laid slabs, R 250, suitable for 1023.
On order, shipped within 10-15 days
Silicone mould, 2 walkways with sand finish, R = 250 suitable for 1023.
On order, shipped within 10-15 days
Silicone mould, 2 curved walkways, longitudinal slabs, with gully cover, R = 400, suitable for 1026.
On order, shipped within 10-15 days
Silicone mould, 2 curved pavements, slabs lengthways, with gully cover, R = 600, suitable for 1027. The external curve dimension of the road is approximately 150 mm, and the internal curve dimension is approximately 125 mm.
On order, shipped within 10-15 days
Silicone mould, 2 curved walkways, longitudinal slabs, with gully cover, R = 900 suitable for 1028.
On order, shipped within 10-15 days
Silicone mould, 2 curved. Pavements, slabs lengthways, with gully cover, R = 1500, suitable for 1029.
On order, shipped within 10-15 days
Silicone mould, crossing setts, pavement, pavement with entrance.
On order, shipped within 10-15 days
Country and village roads
- 66 mm
- radii of 125, 260 and 700 mm
A two-lane road about 66 mm wide in fine cobblestones, with or without gullies, its curves from 125 to 700 mm, its pavements of 40 cm slabs and a junction. Set 1200 brings together nine moulds, 1201 has five and 1203 three.
Silicone mould set “1200 country and village roads”, 9 moulds. The set consists of the following moulds: 1210 straight, fine cobblestone, without gullies/covers, approx. 148 x 66 mm. 1212 straight, fine cobblestone, with channel gullies and gully cover. 1222 road curve, cobblestone, with channel gully, R = 125 mm. 1223 road curve, cobblestone with channel gully, R = 260 mm. 1227 road curve, fine cobblestone without gullies, R = 700 mm. 1266 2 straight pavement sections, 40 cm slabs, 1 laid lengthways, 1 laid crossways, pair. 1242 2 pavement curves, 40 cm slabs crossways, to R = 125 mm pair. 1243 2 pavement curves, 40 cm slabs crossways, to R = 260 mm pair. 1283 junction/T-junction, pavement rounding, pavement/driveway. The nine moulds of the large country road set produce 15 cast parts (see illustration). 2 straight cobblestone road sections. 3 curve radii. 1 junction, 1 T-junction, 2 pavements for the T-junction. 6 matching pavements in pairs.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould set “1200 country and village roads”, 5 moulds. The set consists of the following moulds: 1211, straight, fine cobblestone with channel gullies, approx. 148 x 66 mm. 1266, 2 straight pavements, 40 cm slabs, laid 1/lengthways, 1/crossways, pair. 1223, road curve, cobblestone with channel gully, R = 260 mm. 1243, 2 pavement curves, 40 cm slabs crossways, to R = 260 mm, pair. 1283, crossing/junction, pavement rounding, pavement/driveway. The five moulds of the middle rural road kit produce 10 cast pieces (see illustration). 1 straight cobblestone road piece. 1 curve radius piece. 1 crossing, 1 junction, 2 pavements for junction. 4 matching pavement pieces in pairs.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould set “1200 country and village roads without gullies”, 3 moulds. The set consists of the following moulds: 1211, straight road, fine cobblestone, without gullies/covers, approx. 148 x 66 mm. 1225, road curve, fine cobblestone without gullies, R = 125 mm. 1226, road curve, fine cobblestone without gullies, R = 260 mm. The three moulds of the small country road set produce 3 cast parts (see illustration). 1 piece straight cobblestone road. 2 pieces curve radii.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “straight road” fine cobblestone, without gullies, approx. 148 x 66 mm. Dimensions: length approx. 148 mm, width approx. 66 mm.
On order, shipped within 10-15 days
Silicone mould for “straight road” with fine cobblestones and channel gullies, approx. 148 x 66 mm.
On order, shipped within 10-15 days
Silicone mould for a “straight road”, fine cobblestone, with channel gullies and gully covers.
On order, shipped within 10-15 days
Silicone mould for a country road curve with cobblestones and channel drains, R = 125 mm. Dimensions: 1222, silicone mould “road curve”, centre radius R = 125 mm, outer curve dimension = approx. 130 mm, inner curve dimension = approx. 75 mm, angle approx. 4°, upper offset dimension approx. 125 mm, lower offset dimension approx. 75 mm.
On order, shipped within 10-15 days
Silicone mould for a country road curve, cobblestone with channel gully, R = 260 mm. Dimensions: 1223, silicone mould “road curve”, centre radius R = 260 mm, outer curve dimension = approx. 135 mm, inner curve dimension = approx. 100 mm, angle approx. 26°, upper offset dimension approx. 130 mm, lower offset dimension approx. 100 mm.
On order, shipped within 10-15 days
Silicone mould for a country road curve, fine cobblestone without gullies, R = 125 mm. Dimensions: 1225, silicone mould “road curve”, centre radius R = 125 mm, outer curve dimension = approx. 132 mm, inner curve dimension = approx. 75 mm, angle approx. 45°, upper offset dimension approx. 125 mm, lower offset dimension approx. 75 mm.
On order, shipped within 10-15 days
Silicone mould for a country road curve, fine cobblestone without gullies, R = 260 mm. Dimensions: radius at centre 260 mm, angle 24°, outer arc length approx. 135 mm, inner arc length approx. 100 mm.
On order, shipped within 10-15 days
Silicone mould for a country road curve, fine cobblestone without gullies, R = 700 mm.
On order, shipped within 10-15 days
Silicone mould for country road, 2 footpath curves crossways, R = 125 mm, pair.
On order, shipped within 10-15 days
Silicone mould for a country road, 2 cross pavement bends, R = 260 mm, pair.
On order, shipped within 10-15 days
Silicone mould for country road, 2 pavement curves, large R = 700 mm to road curve 1227, pair.
On order, shipped within 10-15 days
Silicone mould for a country road, 2 straight footpaths, 40 cm slabs, 1 laid lengthways, 1 laid crossways, pair.
On order, shipped within 10-15 days
Silicone mould for country road, junction/intersection, pavement rounding, pavement/driveway.
On order, shipped within 10-15 days
First lay the slabs out dry with a few buildings: a slightly angled or curving layout is more lively than a grid. Glue them onto a rigid base, then paint the streets once laid; the joints disappear under the paint. An edge that sticks up is sanded down, not filled.
Slip packing pieces under the mould 5 to 7 minutes after the plaster starts to set: the piece takes on the curve of the slope before it hardens.