Spörle-Formen · Walls and arcades
Stone walls, concrete and retaining structures
Sixteen stone textures, arcaded concrete walls and massive retaining structures: everything to dress an embankment, a riverbank or the station surroundings, in steps rather than a single face.
- 160 × 100 mmwall panel, 5 mm thick
- 16stone textures
- 20 yearsof success for the concrete series

Choosing your stone
The stone is chosen by region: rubble stone and natural stone in the mountains, the Pre-Alps and open country, ashlar near towns and stations. The 160 × 100 mm panels are cut by scoring and then snapping them, and can be cast curved straight from the mould.
- A long wall in one piece looks unconvincing: build in steps, with a massive base, short piers and coping.
- Piers 6020 and coping and steps 6026 complement all the walls.
- The large blocks 6018 and 6019 also serve as a quay wall.
Stone walls
- 160 × 100 × 5 mm
Sandstone, ashlar, rubble stone, natural stone: fourteen wall panels, three versions with a coping course, the piers and the coping. Set 6100 combines 6020, 6026 and three walls of your choice.
Silicone mould set “Masonry” consisting of 5 moulds (6020 + 6026 mandatory). Form 6020, various pillars, natural, rubble, dressed, brick, approx. 30–95 mm high. Form 6026, various coping stone courses and concrete steps. 3 wall moulds of your choice. View these moulds individually here: Form 6006. Form 6007. Form 6008. Form 6009. Form 6010. Form 6012. Form 6013. Form 6014. Form 6015. Form 6016. Form 6017. Form 6018. Form 6019. Form 6030.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” sandstone medium-sized stones, smooth, regularly and straight-hewn.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” ashlar, medium stones, regularly and straight dressed.
On order, shipped within 10-15 days
Silicone mould “Wall” rubble stone, small stones, pronounced structure.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” rubble stone, small to medium stones, very pronounced structure.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” rubble stone, small to medium stones, normally structured.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” rubble stone small to medium stones, fine flat texture.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” rubble stone (exaggerated) large stones, very pronounced structure.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” natural stone, medium to large stones, fine texture.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” natural stone, medium to large stones, deeply embossed structure.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” ashlar, various medium-sized stones, normally textured.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” ashlar, medium to large stones, heavily rugged structure.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” ashlar, very large blocks, irregular (water engineering).
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” ashlar, very large blocks, regular (water engineering).
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” rubble stone as per 6013, but with an additional row of coping stones. Approx. 160 x 100 x 5 mm (wall approx. 160 x 85 mm)
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” rough sandstone blocks, with an additional row of coping stones. Approx. 160 x 100 x 5 mm (wall approx. 160 x 85 mm)
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” rubble stone as 6009, with additional row of coping stones. Approx. 160 x 100 x 5 mm (wall approx. 160 x 85 mm)
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould for various pillars, natural, rubble, ashlar and brick stone, approx. 30–95 mm high.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould for various rows of coping stones and concrete steps.
In stock: 2 on the shelf, shipped within 1-3 days
Riverbanks and waterside
- 6200 = 6030 + 6031 + 6035
Set 6200 brings together a sandstone block wall, a Cyclopean wall for sloping banks and a rock revetment with a path, narrow and flexible to follow a curving bank.
Form set "Shore construction", 3 forms: 6030, 6031 and 6035. Mould 6030, silicone mould “Wall” medium-sized sandstone blocks for wall construction and embankments, approx. 160 x 85 x 5 mm. Mould 6031, silicone mould “Cyclopean wall” for water engineering and sloping embankments, approx. 160 x 85 x 5 mm. Mould 6035, silicone mould “Embankment reinforcement”, rubble stones with path, bendable, approx. 160 x 25 x 13 mm. View these moulds individually here: Mould 6030. Mould 6031. Mould 6035.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Wall” medium-sized sandstone blocks for wall construction and embankments.
On order, shipped within 10-15 days
Silicone mould “Cyclopean wall” for water engineering and sloping banks.
On order, shipped within 10-15 days
Silicone mould “shore reinforcement”, rubble stones with path, bendable.
On order, shipped within 10-15 days
Concrete and arcades
- 87 × 108 mm
Universal 87 × 108 mm panel, walls with three low arcades with or without a pier, walls to line up without piers and with visible joints as on the prototype, flat arcades for narrow passages, open arcades on a foundation. Walls 3025 and 3026 have a cable trough, for a depot or a coal siding. Set 3000 brings together five of these moulds.
Mould set for concrete consisting of 5 moulds. Form 3010, universal concrete slab for building bridge bearings, walls, foundations, etc., 87 x 108 x 3.5 mm. Form 3023, retaining wall with low arches, linkable with or without piers, 132 x 100 mm. Form 3024, retaining wall with high arches, linkable without piers, 120 x 100 mm. Form 3030, pierced arches for underpasses, 132 x 70 x 11 mm. Foundation and extension included in Form 3031. Form 3031, piers, foundation, extension and angled profile for underpasses, various dimensions.
In stock: 2 on the shelf, shipped within 1-3 days
Universal silicone mould for a “concrete slab” with base, 87x108x3.5 mm. The base can also be used as a cornice.
On order, shipped within 10-15 days
Silicone mould “concrete wall”, 3 low arches, 130x50x10 mm. Can be linked without pillars, and can also be used as a base / foundation for very high concrete walls.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “concrete wall”, 3 low arches, 130x70x10 mm. Can be linked without pillars, and can also be used as a base / foundation for very high concrete walls.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould for a “concrete” retaining wall with 3 low arches, 132×100 mm. Can be lined up with or without pillars.
On order, shipped within 10-15 days
Silicone mould “concrete wall”, 2 high arches, 120x100x 8-10 mm.
On order, shipped within 10-15 days
Silicone mould “concrete wall”, 2 low arches, 120x70x7 mm. Low arches with cable duct for locomotive depot, retaining wall, coal siding. Can be linked without pillars.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “concrete wall”, 2 high arches, 120x100x7 mm. High arches with cable duct for locomotive depot, ramp, coal track. Can be linked without pillars.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “concrete wall”, 3 shallow high arches, 163x96x7 mm. Flat arcade row for narrow sections with pillars, low space requirement.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “concrete wall” with 3 open arches, 132x70x11 mm. e.g. for underpasses. Foundation and extension in form 3031.
On order, shipped within 10-15 days
Silicone mould “concrete” pillars and foundations. Pillars, foundations, extensions and sloped profiles for underpasses, various supplementary dimensions.
On order, shipped within 10-15 days
Retaining structures and brick walls
- up to 140 × 100 × 14 mm
Massive arcaded walls, including the “Rabenau” after the Saxon narrow-gauge station of the same name, in a low or high version, with a rendered or brick vault. Brick walls 7003, 7005 and 7006 and factory walls 7024 complete the urban surroundings.
Silicone moulds “Rabenau retaining structure” 76x103x19mm. 2 moulds for 5 cast parts.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “support structure” arcade wall flat low 132x88x4mm. Compact design, ideal for tight spaces.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “Rabenau retaining structure” compact 76x103x19mm. Like 6403 but in a fully compact version.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “support structure” with separate pillar 135x91x14mm. Support structure with 2 low arches, plastered vaults and separate pillar.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “support structure” with 2 high arches, vault interior plastered, 140x100x14mm.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “support structure” with 2 high arches, vault interior brick, natural stone, 140x100x14mm.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “support structure” low with pier, 95x68x14mm.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “old rustic brick wall stretcher bond” approx. 160 x 99 x 3.5 mm.
On order, shipped within 10-15 days
Silicone mould “fine brick wall stretcher bond” approx. 120 x 80 x 3 mm.
On order, shipped within 10-15 days
Silicone mould “fine brick wall stretcher bond, old wall” approx. 120 x 80 x 3 mm.
On order, shipped within 10-15 days
Silicone mould, 5 different factory and yard walls, 3 separate pillars.
In stock: 1 on the shelf, shipped within 1-3 days
For an invisible joint, even on rubble stone, glue the piers with an acrylic modelling paste or a “mortar” of filler and fine sand, then smooth with a knife. A slight batter strengthens the massive look of a concrete wall.