Spörle-Formen · Platforms and ramps
Station platforms and loading ramps
Low or high platform edges, complete platforms, earth-filled platforms, goods ramps and loading roads, at the exact heights of H0 scale.
- 10 mmlow platform, 38 cm full size
- 14 mmhigh platform, 76 cm full size
- 20 mmfrom platform edge to track centre line

The system
The heights allow for the track, that is about 4.5 mm of sleepers and rail: a low platform measures about 10 mm, a high platform about 14 mm. On track with raised ballast, simply pack up the platform. Until eras III and IV, high platforms were mainly found at large stations.
- Low platform edges 143 mm long, with lowered section, end pieces, timber boarding and steps.
- High platform edges 142 mm long, five per mould.
- Allow about 20 mm from the platform edge to the track centre line on straight track, and check with your widest vehicles.
Platform edges and surfaces
- low edge ≈ 10 mm
- high edge ≈ 14 mm
Low platform edges in brick, concrete or render, high platform edges in fives, and two surfaces: 30 × 30 cm concrete slabs laid in staggered rows, which join without a seam up to 100 mm wide, or small cobblestones laid in arcs.
Silicone mould for 3 different low platform edges (height approx. 10 mm) and accessories. 1x brick finish. 1x concrete finish. 1x rough plaster various accessories: lowering, ends, stairs and track crossings.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould for 3 identical low platform edges “brick” (height approx. 10 mm) and accessories. 3 identical brick-style versions with different accessories: lowering, ends, stairs and track crossings.
On order, shipped within 10-15 days
Silicone mould for 3 identical low plastered platform edges (height approx. 10 mm) and accessories. 3 identical plastered edges with various accessories: lowering, ends, stairs and track crossings.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould for 3 identical low platform edges, height approx. 9 mm, for “concrete elements” and accessories. 3 identical edges “concrete elements” various accessories: drop, ends, stairs and track crossings.
On order, shipped within 10-15 days
Silicone mould for 5 high platform edges, 4x “brick”, 1x rough plaster, height: approx. 14 mm. 2x 2 different brick finishes: 1x rough plaster.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould for 5 high platform edges, “concrete”, height approx. 14 mm. Two different concrete versions: 3x step elements and 2x with superstructure.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould for 5 different high platform edges, height approx. 14 mm. 1x brick version with and without step, 1x concrete version with and without step. 1x rough plaster.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould for platform paving, “cement slabs” laid in a staggered pattern. Dimensions: 150 x 90 mm. Corresponds to the cement slabs in the prototype, which are 30 x 30 cm and laid in a staggered pattern.
On order, shipped within 10-15 days
Silicone mould for platform surfacing, laid with “small paving” in an arc.
In stock: 1 on the shelf, shipped within 1-3 days
Complete platforms and earth-filled platforms
- 65 mm wide
- 40 mm wide
Complete low platforms 65 mm wide, in concrete or brick, with their lowered pieces for the boarded crossing and the steps. The 40 mm earth-filled platforms, edged with sleepers or stone, suit small stations and halts. Four millimetres of rigid foam underneath, and the low platform becomes a high one.
Silicone mould “complete platform” with slab surface and low “concrete” edges, approx. 152 x 65 x 9.5 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “complete platform” with paving slabs and low “brick” edges, approx. 142 x 65 x 9.5 mm. For this, the matching item is Form 2254 “Section with drop for track crossing”, see also Fig. 2.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “partial piece with low concrete edges and depression for track crossing”. Complementing this, the Form 2153 “Complete platform” slab surface with low “concrete” edges.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “partial piece with low brick edges and depression for track crossing”. For this, the Form 2154 “Complete platform” slab surface with low “brick” edges is also suitable, see also Fig. 2.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “earth-filled platform” with railway sleepers, approx. 153 x 40 x 8 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “earth-filled platform” with stone edge, approx. 162 x 40 x 8 mm. Complementary item no. 2259.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “section with drop for earth-filled platform 2159, track crossing and stairs”. For this, the Form 2159 is also suitable.
In stock: 1 on the shelf, shipped within 1-3 days
Ramps and loading roads
- ≈ 16.5 mm high
Goods ramps on a concrete base with metal angle edging, or on a natural stone base: two side walls, two access ramps and a flight of steps. Sets 2051 and 2052 add the cobbled top and the loading road. A ramp 12 to 15 cm wide is enough to make an impression.
Silicone mould set “Freight ramp – concrete base” approx. 88 mm wide, 3 moulds. Form 1050, concrete ramp with iron profile edge for casting high goods ramps. Contains 2 side walls approx. 16.5 x 132 mm, 2 access ramps with extension and concrete steps. Form 1005 ramp cover made of paving stones. Cobblestone for roads and squares, without road crown. approx. 128 x 86 mm. Form 1006 bumpy cobblestone for ground-level loading roads, with. Edge and boundary stones.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould set “High goods ramp – natural stone plinth” approx. 88 mm wide, 3 moulds. Form 1051, natural stone ramp for casting high goods ramps. Contains 2 side walls approx. 16.5 x 132 mm, 2 access ramps with extension and concrete steps. Form 1005 ramp surface made of paving stones. Cobblestone for roads and squares, without road crown. approx. 128 x 86 mm. Form 1006 bumpy cobblestone for ground-level loading roads, with. Edge and boundary stones.
In stock: 1 on the shelf, shipped within 1-3 days
Silicone mould “High goods ramp with concrete base” 9 cast parts. Concrete ramp with iron profile edge for casting high goods ramps. Contains 2 side walls approx. 16.5 x 132 mm, 2 approach ramps with. Extension and concrete steps. (the moulds for the surfaces must be ordered separately, see also item 2051)
On order, shipped within 10-15 days
Silicone mould “High goods ramp with natural stone base” 9 cast parts. Natural stone ramp for casting high goods ramps. Includes 2 side walls approx. 16.5 x 132 mm, 2 approach slopes with. Extension and concrete steps. (the forms for the surfaces must be ordered separately, see also item 2051)
On order, shipped within 10-15 days
Silicone mould “cobblestone” uneven, without curvature, for squares and ramps, approx. 88 x 128 mm.
On order, shipped within 10-15 days
Silicone mould “loading road, uneven cobblestone with kerbs and edging stones”. for ground-level loading roads, approx. 88 x 133 mm.
On order, shipped within 10-15 days
Silicone mould “loading road, uneven cobblestone with kerb edge”. for ground-level loading roads, with kerbstones on one side, approx. 88 x 131 mm.
On order, shipped within 10-15 days
Platform edges are thin and take a lot of handling: cast them in Keraflott rather than plaster, check that they are straight when demoulding and leave them to dry under a weight.
Glue the foam down first, 5 mm for a low platform and 10 mm for a high one, trim it to height with a wagon carrying a blade that serves as a gauge, lay the surface, then the edges.