Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

H0 and N rolling stock, lighting and cable cars

Brawa, model railways made with care

Locomotives, coaches and wagons in H0 and N, plus street lights, cable cars, bulbs and wiring: the world of a family firm from Waiblingen.

Choose a family See all items

  • 1375items in the shop
  • H0 and Nthe scales in the range
  • 1948the year of the founding
SBB K2 covered goods wagon

What makes Brawa

  • A family firm since 1948: founded by Artur Braun in Waiblingen, in southern Germany, Brawa is run today by the third generation of the family.
  • Love of detail: individually fitted handrails, sprung buffers, crisp printing: every model starts from measurements and photographs of the original and a study of the construction drawings.
  • Sturdy locomotives: most are largely die-cast zinc, for weight and robustness, for DC or AC, with sound and, on steam locomotives, smoke.
  • Cable cars and lighting: H0 cable cars are a house speciality, starting with the Nebelhorn cableway in Oberstdorf; lamps and signals follow, with load-bearing parts made of brass or etched sheet.

Our favourites

New
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound
Brawa 44165 Scale H0
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound

Prototype Even before World War I, plans were being made in Prussia to electrify several mountain railways in Silesia, including the so-called “Zackenbahn” (named after the Zacken River) between Hirschberg and Polaun. Given the difficult topographical conditions, this new form of traction promised considerable savings and more cost-effective operation. However, the outbreak of World War I prevented the work from being completed quickly, and it was not until 1923 that continuous operation began. Since operating trains pulled by locomotives was very cumbersome due to fluctuating traffic volumes, considerations were made early on to switch to railcars. The suitability of the ET 88, originally procured for suburban transport in Berlin, prompted the DRG to procure additional four-axle electric railcars. In 1926-1927, LHW Breslau and WUMAG in Görlitz, in collaboration with SSW-Werke, delivered a total of 11 railcars that were to become the symbol of electric train transport in Silesia. The distinctive vehicles with their open entrance platforms were christened “Rübezahl” by the local population, a name that actually refers to a moody mountain spirit from the Giant Mountains. The railcars, which were initially painted green and designated “Breslau 511-521,” were always used in pairs with up to eight light standard branch line cars as trailers. Due to low demand, a single railcar operated between Josephinenhütte and Grünthal. The greatest rush of passengers was on weekends when the weather was nice and during the winter sports season. Up to three railcars with twelve trailers then operated as a train. At the beginning of the 1930s, the railcars were given the new designation elt 1011-1019 and a two-tone paint scheme. In 1941, the four-axle railcars were given their final numbers and became ET 89 01-11. With the exception of ET 89 11, which had to be taken out of service in 1943 due to an accident, all of them survived the war and the end of electric train transport in Silesia. Four railcars were transferred to PKP, but were not used there. The exact whereabouts of three others are unknown. ET 89 01, 04, and 07 ended up in the western occupation zones and thus became part of the DB fleet, which was founded in 1949. Only ET 89 04 was refurbished and served at the Munich Central Station depot. Initially still listed as 2nd and 3rd class cars, later photos show it as a pure 3rd class vehicle, which then exclusively carried 2nd class passengers after the class reform in 1956. On September 2, 1959, its final hour arrived – ET 89 04 was the last of its kind to be taken out of service and dismantled shortly thereafter, leaving only a few photos to remind us of these unique railcars. Model Illuminated upper carriage lanterns and tail lights Separately switchable interior lighting Separately switchable third headlight New motor New sound

Regular price: CHF 351.90

In stock: 1 on the shelf, shipped within 1-3 days

N Covered Freight Car K2 SBB
Brawa 67871 Scale N
N Covered Freight Car K2 SBB

Prototype The Swiss began standardising some types of goods wagons at an early stage. They were then also procured by all private railways in order to improve repairs and spare part stock-keeping. They included closed goods wagons with a 4.5 m wheel base and a frame length of 7.10 m. Later, the wheel base was increased to 5 m in order to improve the running characteristics. In this form, high numbers of the wagons that were given the K2 designation were procured by SBB. Model Precise replica of board joints Finely engraved fan grill Precise paintwork and painting NEM-standard short-coupling Metal wheels True to original frame construction

Regular price: CHF 38.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Wooden-mast Light, Pin-Socket, LED
Brawa 84124 Scale H0
H0 Wooden-mast Light, Pin-Socket, LED

1 x Wooden-mast Light, Pin-Socket (LED) Height 88 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 17.05

In stock, shipped within 1-3 days

H0 Platform Light, Pin-Socket, LED
Brawa 84049 Scale H0
H0 Platform Light, Pin-Socket, LED

1 x Platform Light, Pin-Socket (LED) Height 70 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 16.15

In stock: 5 on the shelf, shipped within 1-3 days

H0 Street Light, Pin-Socket, LED
Brawa 84013 Scale H0
H0 Street Light, Pin-Socket, LED

1 x Street Light, Pin-Socket (LED) Height 58 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 15.95

In stock: 5 on the shelf, shipped within 1-3 days

H0 Telephone Box Swisscom
Brawa 5449 Scale H0
H0 Telephone Box Swisscom

1 x Telephone Box Swisscom Height 33 mm With lighting Spare bulb 3268

Regular price: CHF 18.85

In stock: 1 on the shelf, shipped within 1-3 days

All Brawa items

Filter products
H0 Tank Car 2-axle Zd DR
Brawa 50084 Scale H0
H0 Tank Car 2-axle Zd DR

Prototype As early as 1900, the first specialised chemical tank wagons were developed for transporting chemical products. From the outset, they differed significantly from the tank wagons designed for transporting flammable liquids. A crucial safety feature of chemical tank wagons for acid transport was the absence of bottom valves, which helped to prevent accidental leakage of their hazardous cargo. Additionally, due to the high density of acids, these tanks were comparatively smaller than those used for flammable liquids. For the typical 8.8-metre-long wagons of the standardised interchangeable types introduced in the 1930s, a tank volume of between 10 and 12 m³ proved to be the most economical solution. Depending on the manufacturing capabilities of the wagon builders, the tanks were either riveted or welded. However, the heating pans located in the lower section of the tanks were consistently produced using welding technology to ensure greater tightness and stability. The wagons, originally built from 1939 onwards for I.G. Farbenindustrie and the Wirtschaftliche Forschungsgesellschaft (Wifo), were largely transferred to the successor companies Bayer, BASF and VTG in the Federal Republic of Germany after the Second World War. In the German Democratic Republic, Deutsche Reichsbahn (the East German national railway) took possession of the wagons and leased them to state-owned enterprises, known as VEBs. After approximately 40 years of service, these wagons were gradually decommissioned from the mid-1970s onwards. The last chemical tank wagons of this type were finally retired in 1988. Model Consideration of many design differences Variants in riveted or welded construction Replica of the heating pans Variants with and without brakeman's cab Metal axle holders Bogie with three-point support Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 40.50

On order, shipped within 10-15 days

H0 Tank Car 2-axle Zh DR
Brawa 50085 Scale H0
H0 Tank Car 2-axle Zh DR

Prototype As early as 1900, the first specialised chemical tank wagons were developed for transporting chemical products. From the outset, they differed significantly from the tank wagons designed for transporting flammable liquids. A crucial safety feature of chemical tank wagons for acid transport was the absence of bottom valves, which helped to prevent accidental leakage of their hazardous cargo. Additionally, due to the high density of acids, these tanks were comparatively smaller than those used for flammable liquids. For the typical 8.8-metre-long wagons of the standardised interchangeable types introduced in the 1930s, a tank volume of between 10 and 12 m³ proved to be the most economical solution. Depending on the manufacturing capabilities of the wagon builders, the tanks were either riveted or welded. However, the heating pans located in the lower section of the tanks were consistently produced using welding technology to ensure greater tightness and stability. The wagons, originally built from 1939 onwards for I.G. Farbenindustrie and the Wirtschaftliche Forschungsgesellschaft (Wifo), were largely transferred to the successor companies Bayer, BASF and VTG in the Federal Republic of Germany after the Second World War. In the German Democratic Republic, Deutsche Reichsbahn (the East German national railway) took possession of the wagons and leased them to state-owned enterprises, known as VEBs. After approximately 40 years of service, these wagons were gradually decommissioned from the mid-1970s onwards. The last chemical tank wagons of this type were finally retired in 1988. Model Consideration of many design differences Variants in riveted or welded construction Replica of the heating pans Variants with and without brakeman's cab Metal axle holders Bogie with three-point support Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 40.50

On order, shipped within 10-15 days

H0 Gas Tank Car 6-axle ZZd "VTG" DB
Brawa 50088 Scale H0
H0 Gas Tank Car 6-axle ZZd "VTG" DB

Prototype In 1941, the Heidelberg company Waggonfabrik Fuchs delivered the first 6-axle gas tank wagons to the National Railway. With a length over buffers of 14.6 metres and a tank volume of 42.5 m³, these vehicles were a good deal larger than the acid tank wagons, which were based on the same design. The wagons utilised for gas transport were essential for conveying butane and propane. The National Railway sent these wagons to customers in West Germany, including the private wagon leasing company VTG. In the East, the wagons were utilised directly by the National Railway. To prevent excessive heating of the gas loaded in the tanks due to solar radiation, and the resulting expansion and pressure build-up inside the tank, some of the wagons were fitted with a sun shield. On the wagons operated by the National Railway (East), the conversion of the boiler access was documented. This could no longer be done from the sides, but only from the hand-brake platform. Model Variants with and without sunroof Bogie with three-point support Precise paintwork and painting Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Free standing handle bars Individually mounted axle brake rod

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Gas Tank Car Z 6-axle Zd "VTG" DB
Brawa 50089 Scale H0
H0 Gas Tank Car Z 6-axle Zd "VTG" DB

Prototype In 1941, the Heidelberg company Waggonfabrik Fuchs delivered the first 6-axle gas tank wagons to the National Railway. With a length over buffers of 14.6 metres and a tank volume of 42.5 m³, these vehicles were a good deal larger than the acid tank wagons, which were based on the same design. The wagons utilised for gas transport were essential for conveying butane and propane. The National Railway sent these wagons to customers in West Germany, including the private wagon leasing company VTG. In the East, the wagons were utilised directly by the National Railway. To prevent excessive heating of the gas loaded in the tanks due to solar radiation, and the resulting expansion and pressure build-up inside the tank, some of the wagons were fitted with a sun shield. On the wagons operated by the National Railway (East), the conversion of the boiler access was documented. This could no longer be done from the sides, but only from the hand-brake platform. Model Variants with and without sunroof Bogie with three-point support Precise paintwork and painting Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Free standing handle bars Individually mounted axle brake rod

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Gas Tank Car 6-axle ZZd "VTG" DB
Brawa 50092 Scale H0
H0 Gas Tank Car 6-axle ZZd "VTG" DB

Prototype In 1941, the Heidelberg company Waggonfabrik Fuchs delivered the first 6-axle gas tank wagons to the National Railway. With a length over buffers of 14.6 metres and a tank volume of 42.5 m³, these vehicles were a good deal larger than the acid tank wagons, which were based on the same design. The wagons utilised for gas transport were essential for conveying butane and propane. The National Railway sent these wagons to customers in West Germany, including the private wagon leasing company VTG. In the East, the wagons were utilised directly by the National Railway. To prevent excessive heating of the gas loaded in the tanks due to solar radiation, and the resulting expansion and pressure build-up inside the tank, some of the wagons were fitted with a sun shield. On the wagons operated by the National Railway (East), the conversion of the boiler access was documented. This could no longer be done from the sides, but only from the hand-brake platform. Model Variants with and without sunroof Bogie with three-point support Precise paintwork and painting Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Free standing handle bars Individually mounted axle brake rod

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Covered Freight Car S-CHO "EUROP" NS
Brawa 50116 Scale H0
H0 Covered Freight Car S-CHO "EUROP" NS

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gs142 "EUROP" NS
Brawa 50118 Scale H0
H0 Covered Freight Car Gs142 "EUROP" NS

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gs "EUROP" DSB
Brawa 50124 Scale H0
H0 Covered Freight Car Gs "EUROP" DSB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gs "EUROP" DSB
Brawa 50125 Scale H0
H0 Covered Freight Car Gs "EUROP" DSB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Street Light
Brawa 5014 Scale H0
H0 Street Light

1 x Street Light (Bulb) Height 57 mm Spare bulb 3293 Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 16.70

On order, shipped within 10-15 days

H0 Covered Freight Car Gmmhs60 "EUROP" DB
Brawa 50141 Scale H0
H0 Covered Freight Car Gmmhs60 "EUROP" DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gmms60 "EUROP" DB
Brawa 50142 Scale H0
H0 Covered Freight Car Gmms60 "EUROP" DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gmmhs56 "Brandt" DB
Brawa 50143 Scale H0
H0 Covered Freight Car Gmmhs56 "Brandt" DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gs212 DB
Brawa 50144 Scale H0
H0 Covered Freight Car Gs212 DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Grs-v212 DB
Brawa 50145 Scale H0
H0 Covered Freight Car Grs-v212 DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gs[1200] DR
Brawa 50146 Scale H0
H0 Covered Freight Car Gs[1200] DR

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gs[1200] "Barkas" DR
Brawa 50147 Scale H0
H0 Covered Freight Car Gs[1200] "Barkas" DR

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car K4 "Jura" SBB
Brawa 50148 Scale H0
H0 Covered Freight Car K4 "Jura" SBB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gmmehs56 DB
Brawa 50149 Scale H0
H0 Covered Freight Car Gmmehs56 DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gmms44 "EUROP" DB
Brawa 50150 Scale H0
H0 Covered Freight Car Gmms44 "EUROP" DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gmms44 DB
Brawa 50151 Scale H0
H0 Covered Freight Car Gmms44 DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gs211 DB
Brawa 50152 Scale H0
H0 Covered Freight Car Gs211 DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gmms40 "Kali" DB
Brawa 50153 Scale H0
H0 Covered Freight Car Gmms40 "Kali" DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Covered Freight Car Gs210 DB
Brawa 50154 Scale H0
H0 Covered Freight Car Gs210 DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom

Regular price: CHF 52.25

On order, shipped within 10-15 days