H0 and N rolling stock, lighting and cable cars
Brawa, model railways made with care
Locomotives, coaches and wagons in H0 and N, plus street lights, cable cars, bulbs and wiring: the world of a family firm from Waiblingen.
- 1375items in the shop
- H0 and Nthe scales in the range
- 1948the year of the founding

What makes Brawa
- A family firm since 1948: founded by Artur Braun in Waiblingen, in southern Germany, Brawa is run today by the third generation of the family.
- Love of detail: individually fitted handrails, sprung buffers, crisp printing: every model starts from measurements and photographs of the original and a study of the construction drawings.
- Sturdy locomotives: most are largely die-cast zinc, for weight and robustness, for DC or AC, with sound and, on steam locomotives, smoke.
- Cable cars and lighting: H0 cable cars are a house speciality, starting with the Nebelhorn cableway in Oberstdorf; lamps and signals follow, with load-bearing parts made of brass or etched sheet.
The Brawa families
Rolling stock
210 itemsLocomotivesLocomotives in H0 and N, from the DB AG TRAXX BR 147 to the DR BR 132.See the items
56 itemsRailcars and multiple unitsTWINDEXX Vario double-deck trains in N, DRG VT 137 diesel railcar in H0.See the items
360 itemsPassenger coachesDB express coaches, SBB coaches and complete trains in H0 and N.See the items
448 itemsFreight wagonsCovered wagons, container wagons and luggage vans, including the SBB K2 "Ovomaltine".See the itemsScenery and cable cars
117 itemsLighting and scenery accessoriesWooden-mast lights, park lanterns and LED wall lights, clocks and telephone boxes.See the items
12 itemsCable carsNebelhorn, Hahnenkamm, Kanzelwand, Titlis and chairlift, in H0 and N.See the itemsBulbs and wiring
All Brawa items
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days
1 x Mushroom-head Platform Light (Bulb) Height 100 mm Spare bulb 3293 Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted
On order, shipped within 10-15 days
Prototype After an initial series of EKW 49’s that were converted to KKd 49’s, the Deutsche Bundesbahn (West German Federal Railway) quickly began developing its own entirely new powder wagons. The findings from the conversion and operation of the KKd 49 were immediately incorporated into the new design. The result was the KKds 55 wagon type, which was intended for the transport of alumina. The vehicle frame rests on two type 931 Minden-Dorstfeld bogies. Since the basic structure of the powdered goods containers is integrated into the wagons’ loadbearing structure, they do not require internal longitudinal beams. Advantageously, this made it possible to pull the container bottoms down a long way over the track. The four silo containers of the same size included an emptying device with a dispersal base in each container. Compressed air was used to unload the cargo from the containers. The small series (only 24 units) that was ordered from the Talbot wagon factory was delivered to the DB from 1954 onwards. As well as transporting alumina, aluminium oxide was also loaded into these wagons. In addition, they were also leased to corresponding companies as private wagons. Due to the small total quantity, the wagons were all taken out of service by 1998. Model Open view between the containers Individually mounted container cover and valves Brake blocks in wheel plane Individually mounted steps Individually mounted axle brake rod True to original brake unit NEM-standard short-coupling
On order, shipped within 10-15 days
Prototype For milk transport and especially for transporting milk churns, the Königlich Bayerische Staatsbahn purchased two-axle cars from Maschinenfabrik Augsburg Nuremberg. The cars had a riveted sub-frame with framework axle keep plate and a 4.50 m wheel base. For use in passenger trains, they were equipped with a compressed air brake of type Westinghouse. For optimum ventilation of the hold, the cars had a Growe fan on the roof and ventilation slats on the front walls. The light-coloured livery ensured that the inside temperatures were kept at acceptable levels in summer. The cars had two sliding doors running in opposite directions on each side, in order to be able to carry out loading work as quickly as possible during short stops. In order to collect the milk churns of the Bavarian dairy farmers, who brought their products to the nearest station by wagon, the cars were used in scheduled passenger trains. This enabled the fastest possible transport at that time of perishable milk to the dairies in the city. MODEL: Filigree handrails True-to-original brake system Extra mounted "growe" fan on the roof Perforated ventilator grill Extra mounted signal holder Fine metal spoke wheels Model Fine replica of the wheel bearing Precise replica of board joints Individually mounted fans Perforated fan grill Individually mounted axle brake rod Die-cast zinc spoked wheels Wheelsets with inside contours Individually mounted signal holder Individually mounted door latches True to original brake unit
On order, shipped within 10-15 days
Prototype The Deutsche Bundesbahn did not acquire any four-axle boxcars, unlike the DR where they were an important part of the freight car fleet. The result of developments during the war produced different types of four-axle boxcars which were then produced in large quantities. These developments produced the GGhrsz model from 1966 onwards. These cars were then later designated as Gagmrs-v and then as Gags type code number 1992. The definitive form of the four-axle boxcars of the Deutsche Reichsbahn had finally been identified thanks to this style, which is why the cars were produced in large quantities. The vehicles had a length including buffer of 16.52 m and a loading capacity of 57 t. The body was made up of sheet metal which was welded together and the floor was made out of wood. After the German reunification, these cars were no longer in the communal freight car fleet, but some of them continued to be used as private cars. Model Multi-part roof fittings Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype The Deutsche Bundesbahn did not acquire any four-axle boxcars, unlike the DR where they were an important part of the freight car fleet. The result of developments during the war produced different types of four-axle boxcars which were then produced in large quantities. These developments produced the GGhrsz model from 1966 onwards. These cars were then later designated as Gagmrs-v and then as Gags type code number 1992. The definitive form of the four-axle boxcars of the Deutsche Reichsbahn had finally been identified thanks to this style, which is why the cars were produced in large quantities. The vehicles had a length including buffer of 16.52 m and a loading capacity of 57 t. The body was made up of sheet metal which was welded together and the floor was made out of wood. After the German reunification, these cars were no longer in the communal freight car fleet, but some of them continued to be used as private cars. Model Multi-part roof fittings Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype The Deutsche Bundesbahn did not acquire any four-axle boxcars, unlike the DR where they were an important part of the freight car fleet. The result of developments during the war produced different types of four-axle boxcars which were then produced in large quantities. These developments produced the GGhrsz model from 1966 onwards. These cars were then later designated as Gagmrs-v and then as Gags type code number 1992. The definitive form of the four-axle boxcars of the Deutsche Reichsbahn had finally been identified thanks to this style, which is why the cars were produced in large quantities. The vehicles had a length including buffer of 16.52 m and a loading capacity of 57 t. The body was made up of sheet metal which was welded together and the floor was made out of wood. After the German reunification, these cars were no longer in the communal freight car fleet, but some of them continued to be used as private cars. Model Multi-part roof fittings Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype The Deutsche Bundesbahn did not acquire any four-axle boxcars, unlike the DR where they were an important part of the freight car fleet. The result of developments during the war produced different types of four-axle boxcars which were then produced in large quantities. These developments produced the GGhrsz model from 1966 onwards. These cars were then later designated as Gagmrs-v and then as Gags type code number 1992. The definitive form of the four-axle boxcars of the Deutsche Reichsbahn had finally been identified thanks to this style, which is why the cars were produced in large quantities. The vehicles had a length including buffer of 16.52 m and a loading capacity of 57 t. The body was made up of sheet metal which was welded together and the floor was made out of wood. After the German reunification, these cars were no longer in the communal freight car fleet, but some of them continued to be used as private cars. Model Multi-part roof fittings Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype The Deutsche Bundesbahn did not acquire any four-axle boxcars, unlike the DR where they were an important part of the freight car fleet. The result of developments during the war produced different types of four-axle boxcars which were then produced in large quantities. These developments produced the GGhrsz model from 1966 onwards. These cars were then later designated as Gagmrs-v and then as Gags type code number 1992. The definitive form of the four-axle boxcars of the Deutsche Reichsbahn had finally been identified thanks to this style, which is why the cars were produced in large quantities. The vehicles had a length including buffer of 16.52 m and a loading capacity of 57 t. The body was made up of sheet metal which was welded together and the floor was made out of wood. After the German reunification, these cars were no longer in the communal freight car fleet, but some of them continued to be used as private cars. Model Multi-part roof fittings Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype The Deutsche Bundesbahn did not acquire any four-axle boxcars, unlike the DR where they were an important part of the freight car fleet. The result of developments during the war produced different types of four-axle boxcars which were then produced in large quantities. These developments produced the GGhrsz model from 1966 onwards. These cars were then later designated as Gagmrs-v and then as Gags type code number 1992. The definitive form of the four-axle boxcars of the Deutsche Reichsbahn had finally been identified thanks to this style, which is why the cars were produced in large quantities. The vehicles had a length including buffer of 16.52 m and a loading capacity of 57 t. The body was made up of sheet metal which was welded together and the floor was made out of wood. After the German reunification, these cars were no longer in the communal freight car fleet, but some of them continued to be used as private cars. Model Multi-part roof fittings Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype The Deutsche Bundesbahn did not acquire any four-axle boxcars, unlike the DR where they were an important part of the freight car fleet. The result of developments during the war produced different types of four-axle boxcars which were then produced in large quantities. These developments produced the GGhrsz model from 1966 onwards. These cars were then later designated as Gagmrs-v and then as Gags type code number 1992. The definitive form of the four-axle boxcars of the Deutsche Reichsbahn had finally been identified thanks to this style, which is why the cars were produced in large quantities. The vehicles had a length including buffer of 16.52 m and a loading capacity of 57 t. The body was made up of sheet metal which was welded together and the floor was made out of wood. After the German reunification, these cars were no longer in the communal freight car fleet, but some of them continued to be used as private cars. Model Multi-part roof fittings Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype The stake cars were also redesigned in the mid 1920s in accordance with the principles of interchangeability. It was decided to use the chassis of the G1 car so that the car was longer than its association type predecessor and had two more stakes. However, the larger loading surface did not affect the payload; this remained unchanged at 15 tonnes. As the majority of freight transported generally had a high volume and a low weight, this had no further negative effect. As with the freight carriage, the majority of the stake cars could be adapted to the Russian wide gauge in accordance with the spirit of the age and identified by the white buffer sleeves and the sub-class mark "r". The floor also underwent several changes. Whereas the first 180 carriages which were built from 1926 had a floor made of 56 mm thick planks, from 1934 onwards two cross-wise layers of 32 mm each were used. At the beginning of the 1940s, all carriages were then equipped with 72 mm thick boards - the main freight was now lorries and tracked vehicles. In total, 1643 cars were delivered to DRG, so that the Rr Stuttgart played a rather modest role in the overall stock of stake cars. It shared this lot with almost all interchangeable cars, which usually did not even begin to approach the numbers of their predecessors. In addition to road vehicles, they were mainly used for transporting tree trunks, sawn timber, metal sheets, profiles and other large volume goods which were not sensitive to moisture. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype The stake cars were also redesigned in the mid 1920s in accordance with the principles of interchangeability. It was decided to use the chassis of the G1 car so that the car was longer than its association type predecessor and had two more stakes. However, the larger loading surface did not affect the payload; this remained unchanged at 15 tonnes. As the majority of freight transported generally had a high volume and a low weight, this had no further negative effect. As with the freight carriage, the majority of the stake cars could be adapted to the Russian wide gauge in accordance with the spirit of the age and identified by the white buffer sleeves and the sub-class mark "r". The floor also underwent several changes. Whereas the first 180 carriages which were built from 1926 had a floor made of 56 mm thick planks, from 1934 onwards two cross-wise layers of 32 mm each were used. At the beginning of the 1940s, all carriages were then equipped with 72 mm thick boards - the main freight was now lorries and tracked vehicles. In total, 1643 cars were delivered to DRG, so that the Rr Stuttgart played a rather modest role in the overall stock of stake cars. It shared this lot with almost all interchangeable cars, which usually did not even begin to approach the numbers of their predecessors. In addition to road vehicles, they were mainly used for transporting tree trunks, sawn timber, metal sheets, profiles and other large volume goods which were not sensitive to moisture. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume.After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended.New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district.As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction
On order, shipped within 10-15 days
Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction
On order, shipped within 10-15 days
Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction
On order, shipped within 10-15 days
Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction
On order, shipped within 10-15 days
Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction
On order, shipped within 10-15 days
Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction
On order, shipped within 10-15 days

