H0 and N rolling stock, lighting and cable cars
Brawa, model railways made with care
Locomotives, coaches and wagons in H0 and N, plus street lights, cable cars, bulbs and wiring: the world of a family firm from Waiblingen.
- 1375items in the shop
- H0 and Nthe scales in the range
- 1948the year of the founding

What makes Brawa
- A family firm since 1948: founded by Artur Braun in Waiblingen, in southern Germany, Brawa is run today by the third generation of the family.
- Love of detail: individually fitted handrails, sprung buffers, crisp printing: every model starts from measurements and photographs of the original and a study of the construction drawings.
- Sturdy locomotives: most are largely die-cast zinc, for weight and robustness, for DC or AC, with sound and, on steam locomotives, smoke.
- Cable cars and lighting: H0 cable cars are a house speciality, starting with the Nebelhorn cableway in Oberstdorf; lamps and signals follow, with load-bearing parts made of brass or etched sheet.
The Brawa families
Rolling stock
210 itemsLocomotivesLocomotives in H0 and N, from the DB AG TRAXX BR 147 to the DR BR 132.See the items
56 itemsRailcars and multiple unitsTWINDEXX Vario double-deck trains in N, DRG VT 137 diesel railcar in H0.See the items
360 itemsPassenger coachesDB express coaches, SBB coaches and complete trains in H0 and N.See the items
448 itemsFreight wagonsCovered wagons, container wagons and luggage vans, including the SBB K2 "Ovomaltine".See the itemsScenery and cable cars
117 itemsLighting and scenery accessoriesWooden-mast lights, park lanterns and LED wall lights, clocks and telephone boxes.See the items
12 itemsCable carsNebelhorn, Hahnenkamm, Kanzelwand, Titlis and chairlift, in H0 and N.See the itemsBulbs and wiring
All Brawa items
Prototype In 1939/40, the Köln-Deutz (Cologne-Deutz) and Uerdingen wagon factories each constructed a quadruple axle tank wagons in a lightweight design. Directly related to this, Westwaggon also manufactured the prototype of the tub-style tender, with which the war locomotives belonging to the BR 42 and 52 were coupled. The development was primarily driven by the military since it was necessary to transport enormous amounts of crude oil and fuels for replenishment purposes. As was the case with all war designs, the lightweight design was fully utilised in order to maximise the potential of the available steel quota. However, it soon became apparent that this was done to the detriment of the durability. At this point, both manufacturers were developing wagons with self-supporting tanks. Whilst Deutz left it at puffer beams, the Uerdinger design also boasted solebars manufactured from bevelled profiles that were intended to contribute in absorbing longitudinal compression forces. The main data of both versions was identical: The length over buffers amounted to 12.40 m, the bogie pivot distance amounted to 6.60 m and the tank contained 63 m3. As a result of the compact design, this amount lead to axle and metre load problems, meaning that it was not possible to completely fill the tank on all routes. Pressed sheet metal bogies with a 2.00 m wheel base were used as the running gear. The wagons that were built up until 1945 were deployed at "Wifo" (scientific research community) and oil associations in order to supply the German Armed Forces. After 1945, various European companies reproduced the wagons in a more advanced form, as did Tatra in Prague in 1946. In 1955, SEAG supplied almost 500 units of the wagons developed from the Uerdingen design to the United States Transportation Corps (USTC). Due to the war, many wagons were lost or remained in the territories of other European state railways . The wagons located in the catchment area of the western occupation zones made their way to VTG, which emerged from the former "Wifo" in 1951. In addition to this, mineral oil companies deployed further wagons in the form of P wagons and emerged as main tenants of the VTG wagons. The wagons that stayed with DR remained in the inventory of the state railway and were only leased out on a long-term basis, primarily to PCK Schwedt/ Oder in this case. The last wagons were only removed from the inventory in the 1990s and were being used as maintenance cars or station wagons. In this guise, they could still be regularly seen after the turn of the millennium. Model Brake blocks in wheel plane Separately mounted buffers Precise paintwork and painting Freestanding placards Metal wheels True to original frame construction
On order, shipped within 10-15 days
Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 - 1958 - up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model NEM-standard short-coupling Bogie with three-point support True to original brake unit on the car bottom Metal wheels Precise paintwork and painting True to original frame construction
On order, shipped within 10-15 days
Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 - 1958 - up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model NEM-standard short-coupling Bogie with three-point support True to original brake unit on the car bottom Metal wheels Precise paintwork and painting True to original frame construction
On order, shipped within 10-15 days
Prototype Even on the inaugural runs, it was evident that the new locomotive not only fulfilled, but also surpassed all expectations. Even when operating at high speeds, it demonstrated low-noise running properties and the boiler always delivered plenty of steam to the balanced fourcylinder engine. In July 1907, the locomotive set a new speed record of 154.4 km/h on a test run between Munich and Augsburg. It was the fastest steam locomotive of its era on the entire European continent. When it was commissioned and completed its sensational record runs in 1906, the S2/6 wore an elegant grey coat of paint. The boiler was clad with a “polished Russian iron jacket”. Model New with energy storage (Digital EXTRA Version) Tender body, chassis and boiler in die-cast zinc Fully mobile tender bogie Reproduction of the model-specific tender bogie Short coupling between locomotive and tender 5-pole skew-wound motor with 2 flywheel drives True-to-scale reproduction of the underframe Fine metal spoke wheels True-to-scale lenght over buffer True-to-original reproduction of the boiler back wall Driver´s cab lighting (possibility to switch on and off with digital system) Numerous metal add-on parts Replicated rivets and hatches Filigree reversing gear
On order, shipped within 10-15 days
Prototype Even on the inaugural runs, it was evident that the new locomotive not only fulfilled, but also surpassed all expectations. Even when operating at high speeds, it demonstrated low-noise running properties and the boiler always delivered plenty of steam to the balanced fourcylinder engine. In July 1907, the locomotive set a new speed record of 154.4 km/h on a test run between Munich and Augsburg. It was the fastest steam locomotive of its era on the entire European continent. When it was commissioned and completed its sensational record runs in 1906, the S 2/6 wore an elegant grey coat of paint. The boiler was clad with a “polished Russian iron jacket”. Model New with energy storage (Digital EXTRA Version) Tender body, chassis and boiler in die-cast zinc Fully mobile tender bogie Reproduction of the model-specific tender bogie Short coupling between locomotive and tender 5-pole skew-wound motor with 2 flywheel drives True-to-scale reproduction of the underframe Fine metal spoke wheels True-to-scale lenght over buffer True-to-original reproduction of the boiler back wall Driver´s cab lighting (possibility to switch on and off with digital system) Numerous metal add-on parts Replicated rivets and hatches Filigree reversing gear
On order, shipped within 10-15 days
Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: sound, automatic decoupling, driver's cabin lighting, driven fans, shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype With the adoption of the 1955 diesel locomotive type program, the foundation for a success story was laid at the Deutsche Bundesbahn (DB) [German Federal Railway] that, to some extent, continues to the present day. The decision was made to develop a diesel locomotive for the secondary railway service with an engine output of between 1,000 and 1,200 HP, the V100 series. Based upon the slightly older V 80, the Bundesbahn Central Office in Munich issued concrete change requests to the MaK Company in order to significantly reduce the costs for the new locomotives. By 1957, this resulting catalogue of requirements thus lead to a largely completed construction of which the Deutsche Bundesbahn ordered six trial locomotives. MaK manufactured a further locomotive at ist own cost in order to also be able to address customers other than DB. With the V100 000, the first of 744 manufactured locomotives of the V100 series left the MaK factory halls in Kiel in March 1958. Like no other locomotive series, it embodied the structural change on the railway that was inevitibly coming. In the middle of Germany's economic miracle, the crimson locomotives shaped the image of the young, modern Deutsche Bundesbahn and sent numerous old steam locomotives to the blast furnaces. The diverse applicability of all three sub-types ensured that the V100 was widely distributed throughout Germany and kept many less frequented secondary railways alive. Approximately a third of all V100 locomotives were equipped with a push-pull train control and multitraction control ex works in order to do away with the time-intensive shunting in train stations where it was necessary to turn the train around. At the beginning of the 1970s, individual locomotives started to be equipped with front-mounted snow ploughs. The first large quantities of the V100.10 (211) were only withdrawn from service at the end of the 1980s. This process only started approximately 10 years later for the V100.20 (212). A reasonably large amount were sold on to other railway companies abroad. Thanks to their reliability and robustness in particular, there are still a few locomotives in operation today after approximately 50 years of operation and are largely being used by private railway companies in Germany. For reasons of differentiation and as the V100 006 was already equipped with a 1,350 HP engine at the point of the first volume production order, all other trial locomotives as well as the recently ordered 1,100 HP locomotives were operated as the V100.10 series. At first glance, it is difficult to notice the differences between the V100.10 series and the trial locomotives. For instance, simple rods were now used in place of the bow-shaped manoeuvring handles and the lower lights were implemented as dual lights. Model Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: Sound Automatic decoupling Driver's cabin lighting Driven fans Shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.
On order, lead time to be confirmed
Prototype With the adoption of the 1955 diesel locomotive type program, the foundation for a success story was laid at the Deutsche Bundesbahn (DB) [German Federal Railway] that, to some extent, continues to the present day. The decision was made to develop a diesel locomotive for the secondary railway service with an engine output of between 1,000 and 1,200 HP, the V100 series. Based upon the slightly older V 80, the Bundesbahn Central Office in Munich issued concrete change requests to the MaK Company in order to significantly reduce the costs for the new locomotives. By 1957, this resulting catalogue of requirements thus lead to a largely completed construction of which the Deutsche Bundesbahn ordered six trial locomotives. MaK manufactured a further locomotive at ist own cost in order to also be able to address customers other than DB. With the V100 000, the first of 744 manufactured locomotives of the V100 series left the MaK factory halls in Kiel in March 1958. Like no other locomotive series, it embodied the structural change on the railway that was inevitibly coming. In the middle of Germany's economic miracle, the crimson locomotives shaped the image of the young, modern Deutsche Bundesbahn and sent numerous old steam locomotives to the blast furnaces. The diverse applicability of all three sub-types ensured that the V100 was widely distributed throughout Germany and kept many less frequented secondary railways alive. Approximately a third of all V100 locomotives were equipped with a push-pull train control and multitraction control ex works in order to do away with the time-intensive shunting in train stations where it was necessary to turn the train around. At the beginning of the 1970s, individual locomotives started to be equipped with front-mounted snow ploughs. The first large quantities of the V100.10 (211) were only withdrawn from service at the end of the 1980s. This process only started approximately 10 years later for the V100.20 (212). A reasonably large amount were sold on to other railway companies abroad. Thanks to their reliability and robustness in particular, there are still a few locomotives in operation today after approximately 50 years of operation and are largely being used by private railway companies in Germany. For reasons of differentiation and as the V100 006 was already equipped with a 1,350 HP engine at the point of the first volume production order, all other trial locomotives as well as the recently ordered 1,100 HP locomotives were operated as the V100.10 series. At first glance, it is difficult to notice the differences between the V100.10 series and the trial locomotives. For instance, simple rods were now used in place of the bow-shaped manoeuvring handles and the lower lights were implemented as dual lights. Model Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: Sound Automatic decoupling Driver's cabin lighting Driven fans Shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype With the adoption of the 1955 diesel locomotive type program, the foundation for a success story was laid at the Deutsche Bundesbahn (DB) [German Federal Railway] that, to some extent, continues to the present day. The decision was made to develop a diesel locomotive for the secondary railway service with an engine output of between 1,000 and 1,200 HP, the V100 series. Based upon the slightly older V 80, the Bundesbahn Central Office in Munich issued concrete change requests to the MaK Company in order to significantly reduce the costs for the new locomotives. By 1957, this resulting catalogue of requirements thus lead to a largely completed construction of which the Deutsche Bundesbahn ordered six trial locomotives. MaK manufactured a further locomotive at ist own cost in order to also be able to address customers other than DB. With the V100 000, the first of 744 manufactured locomotives of the V100 series left the MaK factory halls in Kiel in March 1958. Like no other locomotive series, it embodied the structural change on the railway that was inevitibly coming. In the middle of Germany's economic miracle, the crimson locomotives shaped the image of the young, modern Deutsche Bundesbahn and sent numerous old steam locomotives to the blast furnaces. The diverse applicability of all three sub-types ensured that the V100 was widely distributed throughout Germany and kept many less frequented secondary railways alive. Approximately a third of all V100 locomotives were equipped with a push-pull train control and multitraction control ex works in order to do away with the time-intensive shunting in train stations where it was necessary to turn the train around. At the beginning of the 1970s, individual locomotives started to be equipped with front-mounted snow ploughs. The first large quantities of the V100.10 (211) were only withdrawn from service at the end of the 1980s. This process only started approximately 10 years later for the V100.20 (212). A reasonably large amount were sold on to other railway companies abroad. Thanks to their reliability and robustness in particular, there are still a few locomotives in operation today after approximately 50 years of operation and are largely being used by private railway companies in Germany. For reasons of differentiation and as the V100 006 was already equipped with a 1,350 HP engine at the point of the first volume production order, all other trial locomotives as well as the recently ordered 1,100 HP locomotives were operated as the V100.10 series. At first glance, it is difficult to notice the differences between the V100.10 series and the trial locomotives. For instance, simple rods were now used in place of the bow-shaped manoeuvring handles and the lower lights were implemented as dual lights. Model Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: Sound Automatic decoupling Driver's cabin lighting Driven fans Shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype With the adoption of the 1955 diesel locomotive type program, the foundation for a success story was laid at the Deutsche Bundesbahn (DB) [German Federal Railway] that, to some extent, continues to the present day. The decision was made to develop a diesel locomotive for the secondary railway service with an engine output of between 1,000 and 1,200 HP, the V100 series. Based upon the slightly older V 80, the Bundesbahn Central Office in Munich issued concrete change requests to the MaK Company in order to significantly reduce the costs for the new locomotives. By 1957, this resulting catalogue of requirements thus lead to a largely completed construction of which the Deutsche Bundesbahn ordered six trial locomotives. MaK manufactured a further locomotive at ist own cost in order to also be able to address customers other than DB. With the V100 000, the first of 744 manufactured locomotives of the V100 series left the MaK factory halls in Kiel in March 1958. Like no other locomotive series, it embodied the structural change on the railway that was inevitibly coming. In the middle of Germany's economic miracle, the crimson locomotives shaped the image of the young, modern Deutsche Bundesbahn and sent numerous old steam locomotives to the blast furnaces. The diverse applicability of all three sub-types ensured that the V100 was widely distributed throughout Germany and kept many less frequented secondary railways alive. Approximately a third of all V100 locomotives were equipped with a push-pull train control and multitraction control ex works in order to do away with the time-intensive shunting in train stations where it was necessary to turn the train around. At the beginning of the 1970s, individual locomotives started to be equipped with front-mounted snow ploughs. The first large quantities of the V100.10 (211) were only withdrawn from service at the end of the 1980s. This process only started approximately 10 years later for the V100.20 (212). A reasonably large amount were sold on to other railway companies abroad. Thanks to their reliability and robustness in particular, there are still a few locomotives in operation today after approximately 50 years of operation and are largely being used by private railway companies in Germany. For reasons of differentiation and as the V100 006 was already equipped with a 1,350 HP engine at the point of the first volume production order, all other trial locomotives as well as the recently ordered 1,100 HP locomotives were operated as the V100.10 series. At first glance, it is difficult to notice the differences between the V100.10 series and the trial locomotives. For instance, simple rods were now used in place of the bow-shaped manoeuvring handles and the lower lights were implemented as dual lights. Model Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: Sound Automatic decoupling Driver's cabin lighting Driven fans Shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype With the adoption of the 1955 diesel locomotive type program, the foundation for a success story was laid at the Deutsche Bundesbahn (DB) [German Federal Railway] that, to some extent, continues to the present day. The decision was made to develop a diesel locomotive for the secondary railway service with an engine output of between 1,000 and 1,200 HP, the V100 series. Based upon the slightly older V 80, the Bundesbahn Central Office in Munich issued concrete change requests to the MaK Company in order to significantly reduce the costs for the new locomotives. By 1957, this resulting catalogue of requirements thus lead to a largely completed construction of which the Deutsche Bundesbahn ordered six trial locomotives. MaK manufactured a further locomotive at ist own cost in order to also be able to address customers other than DB. With the V100 000, the first of 744 manufactured locomotives of the V100 series left the MaK factory halls in Kiel in March 1958. Like no other locomotive series, it embodied the structural change on the railway that was inevitibly coming. In the middle of Germany's economic miracle, the crimson locomotives shaped the image of the young, modern Deutsche Bundesbahn and sent numerous old steam locomotives to the blast furnaces. The diverse applicability of all three sub-types ensured that the V100 was widely distributed throughout Germany and kept many less frequented secondary railways alive. Approximately a third of all V100 locomotives were equipped with a push-pull train control and multitraction control ex works in order to do away with the time-intensive shunting in train stations where it was necessary to turn the train around. At the beginning of the 1970s, individual locomotives started to be equipped with front-mounted snow ploughs. The first large quantities of the V100.10 (211) were only withdrawn from service at the end of the 1980s. This process only started approximately 10 years later for the V100.20 (212). A reasonably large amount were sold on to other railway companies abroad. Thanks to their reliability and robustness in particular, there are still a few locomotives in operation today after approximately 50 years of operation and are largely being used by private railway companies in Germany. For reasons of differentiation and as the V100 006 was already equipped with a 1,350 HP engine at the point of the first volume production order, all other trial locomotives as well as the recently ordered 1,100 HP locomotives were operated as the V100.10 series. At first glance, it is difficult to notice the differences between the V100.10 series and the trial locomotives. For instance, simple rods were now used in place of the bow-shaped manoeuvring handles and the lower lights were implemented as dual lights. Model Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: Sound Automatic decoupling Driver's cabin lighting Driven fans Shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype The Deutsche Reichsbahn Gesellschaft’s (DRG) procurement process for standardised freight locomotives mirrored its earlier evaluations of the 01 and 02 series. According to the specification, the new locomotive had to be capable of hauling goods trains weighing up to 1,200 metric tons over low mountain ranges, with an axle pressure of 20 tons. The maximum speed was set at 70 km/h for the pre-series locomotives. In 1926, to determine the most economical design, orders were placed with various locomotive manufacturers for the construction of 10 locomotives each of the 43 (two-cylinder engine) and 44 (three-cylinder engine) series. In addition to allocating the locomotives to other railway depots, a direct comparison was made between the 43 and 44 at the Pressig-Rothenkirchen depot. The respective merits and shortcomings of both series were determined via tests on the Franconian Forest Railway. The comparison of the two series did not initially favour the more powerful 44 series – the increased economy offered by the two-cylinder type 43 locomotive won the day. However, as Germany emerged from the shadow of the Great Depression in the mid-1930s, calls for more powerful freight locomotives grew louder. The experience gained ten years earlier with the type 44 was still fresh in the memory. The type 44 013-065 locomotives were consequently developed as an intermediate series – in part based on the experience gained in steam engine construction since 1925. In 1938 (from 44 066), full series production finally began. By 1949, a total of 1989 type 44 locomotives had been built at various locomotive factories in Germany and abroad. The new models lived up to all expectations and henceforth became the backbone of the goods train fleet. Model Detailed and movable internal engine, with two crop axles AC version with latest pickup generation Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Standard shaft rear with link guide Illuminated driver's cab (Version Digital EXTRA) Fire flickering (Version Digital EXTRA) Sound decoder, either built in or as a retrofit option Smoke generator can be retrofitted Close coupling between locomotive and tender Perfectly replicated back boilerplate Drive in the tender Single axle bearing Many extra mounted parts True to original wagner smoke deflectors Tender 2'2' T32
On order, shipped within 10-15 days
Prototype The Deutsche Reichsbahn Gesellschaft’s (DRG) procurement process for standardised freight locomotives mirrored its earlier evaluations of the 01 and 02 series. According to the specification, the new locomotive had to be capable of hauling goods trains weighing up to 1,200 metric tons over low mountain ranges, with an axle pressure of 20 tons. The maximum speed was set at 70 km/h for the pre-series locomotives. In 1926, to determine the most economical design, orders were placed with various locomotive manufacturers for the construction of 10 locomotives each of the 43 (two-cylinder engine) and 44 (three-cylinder engine) series. In addition to allocating the locomotives to other railway depots, a direct comparison was made between the 43 and 44 at the Pressig-Rothenkirchen depot. The respective merits and shortcomings of both series were determined via tests on the Franconian Forest Railway. The comparison of the two series did not initially favour the more powerful 44 series – the increased economy offered by the two-cylinder type 43 locomotive won the day. However, as Germany emerged from the shadow of the Great Depression in the mid-1930s, calls for more powerful freight locomotives grew louder. The experience gained ten years earlier with the type 44 was still fresh in the memory. The type 44 013-065 locomotives were consequently developed as an intermediate series – in part based on the experience gained in steam engine construction since 1925. In 1938 (from 44 066), full series production finally began. By 1949, a total of 1989 type 44 locomotives had been built at various locomotive factories in Germany and abroad. The new models lived up to all expectations and henceforth became the backbone of the goods train fleet. Model Detailed and movable internal engine, with two crop axles AC version with latest pickup generation Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Standard shaft rear with link guide Illuminated driver's cab (Version Digital EXTRA) Fire flickering (Version Digital EXTRA) Sound decoder, either built in or as a retrofit option Smoke generator can be retrofitted Close coupling between locomotive and tender Perfectly replicated back boilerplate Drive in the tender Single axle bearing Many extra mounted parts True to original wagner smoke deflectors Tender 2'2' T32
On order, shipped within 10-15 days
Prototype The Deutsche Reichsbahn Gesellschaft’s (DRG) procurement process for standardised freight locomotives mirrored its earlier evaluations of the 01 and 02 series. According to the specification, the new locomotive had to be capable of hauling goods trains weighing up to 1,200 metric tons over low mountain ranges, with an axle pressure of 20 tons. The maximum speed was set at 70 km/h for the pre-series locomotives. In 1926, to determine the most economical design, orders were placed with various locomotive manufacturers for the construction of 10 locomotives each of the 43 (two-cylinder engine) and 44 (three-cylinder engine) series. In addition to allocating the locomotives to other railway depots, a direct comparison was made between the 43 and 44 at the Pressig-Rothenkirchen depot. The respective merits and shortcomings of both series were determined via tests on the Franconian Forest Railway. The comparison of the two series did not initially favour the more powerful 44 series – the increased economy offered by the two-cylinder type 43 locomotive won the day. However, as Germany emerged from the shadow of the Great Depression in the mid-1930s, calls for more powerful freight locomotives grew louder. The experience gained ten years earlier with the type 44 was still fresh in the memory. The type 44 013-065 locomotives were consequently developed as an intermediate series – in part based on the experience gained in steam engine construction since 1925. In 1938 (from 44 066), full series production finally began. By 1949, a total of 1989 type 44 locomotives had been built at various locomotive factories in Germany and abroad. The new models lived up to all expectations and henceforth became the backbone of the goods train fleet. Model Detailed and movable internal engine, with two crop axles AC version with latest pickup generation Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Standard shaft rear with link guide Illuminated driver's cab (Version Digital EXTRA) Fire flickering (Version Digital EXTRA) Sound decoder, either built in or as a retrofit option Smoke generator can be retrofitted Close coupling between locomotive and tender Perfectly replicated back boilerplate Drive in the tender Single axle bearing Many extra mounted parts True to original wagner smoke deflectors Tender 2'2' T32
On order, shipped within 10-15 days
Prototype The Deutsche Reichsbahn Gesellschaft’s (DRG) procurement process for standardised freight locomotives mirrored its earlier evaluations of the 01 and 02 series. According to the specification, the new locomotive had to be capable of hauling goods trains weighing up to 1,200 metric tons over low mountain ranges, with an axle pressure of 20 tons. The maximum speed was set at 70 km/h for the pre-series locomotives. In 1926, to determine the most economical design, orders were placed with various locomotive manufacturers for the construction of 10 locomotives each of the 43 (two-cylinder engine) and 44 (three-cylinder engine) series. In addition to allocating the locomotives to other railway depots, a direct comparison was made between the 43 and 44 at the Pressig-Rothenkirchen depot. The respective merits and shortcomings of both series were determined via tests on the Franconian Forest Railway. The comparison of the two series did not initially favour the more powerful 44 series – the increased economy offered by the two-cylinder type 43 locomotive won the day. However, as Germany emerged from the shadow of the Great Depression in the mid-1930s, calls for more powerful freight locomotives grew louder. The experience gained ten years earlier with the type 44 was still fresh in the memory. The type 44 013-065 locomotives were consequently developed as an intermediate series – in part based on the experience gained in steam engine construction since 1925. In 1938 (from 44 066), full series production finally began. By 1949, a total of 1989 type 44 locomotives had been built at various locomotive factories in Germany and abroad. The new models lived up to all expectations and henceforth became the backbone of the goods train fleet. Model Detailed and movable internal engine, with two crop axles Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Standard shaft rear with link guide Illuminated driver's cab (Version Digital EXTRA) Fire flickering (Version Digital EXTRA) Sound decoder, either built in or as a retrofit option Smoke generator can be retrofitted Close coupling between locomotive and tender Perfectly replicated back boilerplate Drive in the tender Single axle bearing Many extra mounted parts True to original witte smoke deflectors Tender 2'2' T34
On order, shipped within 10-15 days
Prototype The Deutsche Reichsbahn Gesellschaft’s (DRG) procurement process for standardised freight locomotives mirrored its earlier evaluations of the 01 and 02 series. According to the specification, the new locomotive had to be capable of hauling goods trains weighing up to 1,200 metric tons over low mountain ranges, with an axle pressure of 20 tons. The maximum speed was set at 70 km/h for the pre-series locomotives. In 1926, to determine the most economical design, orders were placed with various locomotive manufacturers for the construction of 10 locomotives each of the 43 (two-cylinder engine) and 44 (three-cylinder engine) series. In addition to allocating the locomotives to other railway depots, a direct comparison was made between the 43 and 44 at the Pressig-Rothenkirchen depot. The respective merits and shortcomings of both series were determined via tests on the Franconian Forest Railway. The comparison of the two series did not initially favour the more powerful 44 series – the increased economy offered by the two-cylinder type 43 locomotive won the day. However, as Germany emerged from the shadow of the Great Depression in the mid-1930s, calls for more powerful freight locomotives grew louder. The experience gained ten years earlier with the type 44 was still fresh in the memory. The type 44 013-065 locomotives were consequently developed as an intermediate series – in part based on the experience gained in steam engine construction since 1925. In 1938 (from 44 066), full series production finally began. By 1949, a total of 1989 type 44 locomotives had been built at various locomotive factories in Germany and abroad. The new models lived up to all expectations and henceforth became the backbone of the goods train fleet. Model Detailed and movable internal engine, with two crop axles Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Standard shaft rear with link guide Illuminated driver's cab (Version Digital EXTRA) Fire flickering (Version Digital EXTRA) Sound decoder, either built in or as a retrofit option Smoke generator can be retrofitted Close coupling between locomotive and tender Perfectly replicated back boilerplate Drive in the tender Single axle bearing Many extra mounted parts True to original witte smoke deflectors Tender 2'2' T34
On order, shipped within 10-15 days
Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: sound, automatic decoupling, driver's cabin lighting, driven fans, shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: sound, automatic decoupling, driver's cabin lighting, driven fans, shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: sound, automatic decoupling, driver's cabin lighting, driven fans, shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Etched cooler grille and fan grille Free-standing handrails Spring buffers Clear view through the driver's cabin Realistic reproduction of the tubular frame bogies incl. axle drive Reproduction of brake rods All specific details of the different series taken into consideration Completely recreated driver's cab Zinc die-cast chassis and gear housing Lights fitted with maintenance-free LEDs Digital EXTRA: complete with the following features that can be digitally controlled: sound, automatic decoupling, driver's cabin lighting, driven fans, shunting light and red light can be individually controlled It is possible to retrospectively convert the V 100 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remotecontrol coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype From 1958, the German Federal Railway (Deutsche Bundesbahn) equipped 50 locomotives of the 01 series with the so-called Type I high-performance boiler. Designed according to the construction principles developed by Friedrich Witte, this boiler type had previously been successfully installed in the Bundesbahn’s series BR 01.10 locomotives. The new, fully welded boiler had a significantly better ratio of radiant to tubular heating surface (1:8.8 compared to 1:13.54 in the old-style boiler), which was mainly due to the built-in combustion chamber. To put this in figures: while the evaporation surface of the high-efficiency boiler was 54 m² smaller than that of its predecessor, this was compensated for by an 18 kg/m²h increase in the heating surface load. This made it possible to achieve the same boiler output with significantly lower fuel consumption. Visually, the conversion to the high-performance boiler resulted in locomotives that looked far neater and more modern. In addition, some adjustments were made with regard to occupational health and safety. The pipework was routed in cleaner lines. The sandbox was removed from the top of the boiler. The running board was replaced by a wide circulating plate and handles were integrated into the wind deflectors. On the technical side, the Knorr surface preheater was replaced by a type 57 mixing preheater. The locomotives 01 217 and 223 were fitted with experimental roller bearings in the driving and coupling rods, similar to those used in the BR 01.10. In operational terms, the new locomotives were deployed alongside the “old-style boiler” locomotives from traditional maintenance depots. The use of both 01 variants by DB only came to an end when steam locomotive maintenance finally ceased at the Hof railway depot in 1973. Model Impact resistant body and chassis Perforated underframe in die-cast zinc Die-cast zinc spoked wheels Fine metal drive and coupling rods True to era lighting Drive in the tender for optimal driving characteristics Close coupling between locomotive and tender Standard shaft rear with link guide True to original boiler rear wall Metal axle bearing True to scale axle base New sound
On order, shipped within 10-15 days
Prototype From 1958, the German Federal Railway (Deutsche Bundesbahn) equipped 50 locomotives of the 01 series with the so-called Type I high-performance boiler. Designed according to the construction principles developed by Friedrich Witte, this boiler type had previously been successfully installed in the Bundesbahn’s series BR 01.10 locomotives. The new, fully welded boiler had a significantly better ratio of radiant to tubular heating surface (1:8.8 compared to 1:13.54 in the old-style boiler), which was mainly due to the built-in combustion chamber. To put this in figures: while the evaporation surface of the high-efficiency boiler was 54 m² smaller than that of its predecessor, this was compensated for by an 18 kg/m²h increase in the heating surface load. This made it possible to achieve the same boiler output with significantly lower fuel consumption. Visually, the conversion to the high-performance boiler resulted in locomotives that looked far neater and more modern. In addition, some adjustments were made with regard to occupational health and safety. The pipework was routed in cleaner lines. The sandbox was removed from the top of the boiler. The running board was replaced by a wide circulating plate and handles were integrated into the wind deflectors. On the technical side, the Knorr surface preheater was replaced by a type 57 mixing preheater. The locomotives 01 217 and 223 were fitted with experimental roller bearings in the driving and coupling rods, similar to those used in the BR 01.10. In operational terms, the new locomotives were deployed alongside the “old-style boiler” locomotives from traditional maintenance depots. The use of both 01 variants by DB only came to an end when steam locomotive maintenance finally ceased at the Hof railway depot in 1973. Model Impact resistant body and chassis Perforated underframe in die-cast zinc Die-cast zinc spoked wheels Fine metal drive and coupling rods True to era lighting Drive in the tender for optimal driving characteristics Close coupling between locomotive and tender Standard shaft rear with link guide True to original boiler rear wall Metal axle bearing True to scale axle base New sound
On order, shipped within 10-15 days
Prototype From 1958, the German Federal Railway (Deutsche Bundesbahn) equipped 50 locomotives of the 01 series with the so-called Type I high-performance boiler. Designed according to the construction principles developed by Friedrich Witte, this boiler type had previously been successfully installed in the Bundesbahn’s series BR 01.10 locomotives. The new, fully welded boiler had a significantly better ratio of radiant to tubular heating surface (1:8.8 compared to 1:13.54 in the old-style boiler), which was mainly due to the built-in combustion chamber. To put this in figures: while the evaporation surface of the high-efficiency boiler was 54 m² smaller than that of its predecessor, this was compensated for by an 18 kg/m²h increase in the heating surface load. This made it possible to achieve the same boiler output with significantly lower fuel consumption. Visually, the conversion to the high-performance boiler resulted in locomotives that looked far neater and more modern. In addition, some adjustments were made with regard to occupational health and safety. The pipework was routed in cleaner lines. The sandbox was removed from the top of the boiler. The running board was replaced by a wide circulating plate and handles were integrated into the wind deflectors. On the technical side, the Knorr surface preheater was replaced by a type 57 mixing preheater. The locomotives 01 217 and 223 were fitted with experimental roller bearings in the driving and coupling rods, similar to those used in the BR 01.10. In operational terms, the new locomotives were deployed alongside the “old-style boiler” locomotives from traditional maintenance depots. The use of both 01 variants by DB only came to an end when steam locomotive maintenance finally ceased at the Hof railway depot in 1973. Model Impact resistant body and chassis Perforated underframe in die-cast zinc Die-cast zinc spoked wheels Fine metal drive and coupling rods True to era lighting Drive in the tender for optimal driving characteristics Close coupling between locomotive and tender Standard shaft rear with link guide True to original boiler rear wall Metal axle bearing True to scale axle base New sound
On order, shipped within 10-15 days
Prototype From 1958, the German Federal Railway (Deutsche Bundesbahn) equipped 50 locomotives of the 01 series with the so-called Type I high-performance boiler. Designed according to the construction principles developed by Friedrich Witte, this boiler type had previously been successfully installed in the Bundesbahn’s series BR 01.10 locomotives. The new, fully welded boiler had a significantly better ratio of radiant to tubular heating surface (1:8.8 compared to 1:13.54 in the old-style boiler), which was mainly due to the built-in combustion chamber. To put this in figures: while the evaporation surface of the high-efficiency boiler was 54 m² smaller than that of its predecessor, this was compensated for by an 18 kg/m²h increase in the heating surface load. This made it possible to achieve the same boiler output with significantly lower fuel consumption. Visually, the conversion to the high-performance boiler resulted in locomotives that looked far neater and more modern. In addition, some adjustments were made with regard to occupational health and safety. The pipework was routed in cleaner lines. The sandbox was removed from the top of the boiler. The running board was replaced by a wide circulating plate and handles were integrated into the wind deflectors. On the technical side, the Knorr surface preheater was replaced by a type 57 mixing preheater. The locomotives 01 217 and 223 were fitted with experimental roller bearings in the driving and coupling rods, similar to those used in the BR 01.10. In operational terms, the new locomotives were deployed alongside the “old-style boiler” locomotives from traditional maintenance depots. The use of both 01 variants by DB only came to an end when steam locomotive maintenance finally ceased at the Hof railway depot in 1973. Model Impact resistant body and chassis Perforated underframe in die-cast zinc Die-cast zinc spoked wheels Fine metal drive and coupling rods True to era lighting Drive in the tender for optimal driving characteristics Close coupling between locomotive and tender Standard shaft rear with link guide True to original boiler rear wall Metal axle bearing True to scale axle base New sound
On order, lead time to be confirmed

