Digital electronics and H0 locomotives
ESU, LokSound sound and the SBB Ae 6/6 in H0
LokSound sound decoders, LokPilot decoders, the ECoS command station, the Mobile Control Pro throttle and SwitchPilot accessory decoders: ESU, based in Neu-Ulm, equips your digital layout from locomotive to turnout, and builds sound-fitted H0 locomotives such as the SBB Ae 6/6.
- 245items in the shop
- Since 1999LokSound sound decoders
- 4 protocolsDCC, Motorola, Selectrix and M4

What ESU brings to your layout
- The SBB Ae 6/6 in H0: metal body structure and frame, digitally raised and lowered pantographs, original Ae 6/6 sounds on a LokSound 5 decoder and two speakers. A plug-in pickup and a switch for two-rail or three-rail running.
- LokSound 5, sound since 1999: up to 10 sound channels at once, at least 10 amplified outputs, DCC, Motorola, Selectrix and M4, and automatic registration with the command station via RailComPlus.
- LokPilot 5 for driving: the same four protocols plus analogue running, at least 10 function outputs of 250 mA, load control adjustable through up to 10 CVs.
- From control desk to turnout: ECoS command station with a 7-inch touchscreen, the wireless Mobile Control Pro throttle, also for Z21 and CS3, and SwitchPilot 3 for turnouts, colour-light signals and up to eight servos.
The ESU families
For your H0 layout (1:87)
5 itemsSBB locomotivesThe Ae 6/6 'Uri', 'Ticino', 'Glarus' and 'Lausanne', plus an SBB Cargo.See the items
23 itemsLocomotives H0DB electric and diesel locomotives, Class 66 and KG230 shunters.See the items
25 itemsCoaches and wagons H0DB n-coaches and Sgmmns container wagons.See the itemsTo control your layout and give it sound
25 itemsLokSound sound decodersLokSound 5, from micro and Nano up to L and XL.See the items
40 itemsLokPilot decodersLokPilot 5 for driving, plus the Fx function decoders.See the items
13 itemsECoS and Mobile ControlECoS command station and modules, Mobile Control Pro throttle, CabControl.See the items
13 itemsSwitchPilot and servosTurnout and signal decoders, servo motors and extensions.See the items
31 itemsSpeakersRound and rectangular speakers for sound decoders.See the itemsAll ESU items
LokPilot 5 micro DCC Direct Kato USA Widebody, gauge: N The LokPilot 5 micro DCC Direct Kato USA Widebody is the “twin” of the LokSound 5 micro DCC Direct Kato USA Widebody. With its dimensions of 47.5mm x 14.0mm x 4.5mm it has been specially developed for installation in wide body N gauge locomotives of the Kato USA brand: Most diesel locomotives of this manufacturer come with only a common DC lighting board. Finally, these models can also be easily retrofitted with a LokPilot 5 Decoder. Modes The LokPilot 5 micro DCC Direct Kato USA Widebody is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log on to a suitable DCC System fully automatically. It masters all DCC programming command stations. Auxiliary registers exist for DCC systems that can only program CVs from 1-255. The LokPilot 5 micro DCC Direct Kato USA Widebody decoder recognizes the Märklin® braking sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. The LokPilot 5 micro DCC Direct Kato USA Widebody decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly". Functions Despite its compact dimensions, the LokPilot 5 micro DCC Direct Kato USA Widebody is equipped with an enormous number of function outputs. Two DIP LEDs (included in the box) can be adjusted in length and soldered in directly and controlled separately. In addition, eight (!) more powered function outputs are available. All important lighting functions are available. The brightness of each output can be set separately. Motor The motor control of the LokPilot 5 micro DCC Direct Kato USA Widebody has a variable PWM pulse frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for coreless motors – the typical "hum" is a thing of the past. Load control can be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokPilot 5 micro DCC Direct Kato USA Widebody Decoder delivers up to 0.75A motor power. Protection Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible. Art.No. Delivery 59941 LokPilot 5 micro DCC Direct Kato USA Widebody, gauge: N
On order, shipped within 4-5 days