Exclusive dealer for Switzerland
I-Track, the structure of your layout, ready to assemble
Baseboards, track formations, track beds, helices and CarMotion roads: the plywood system by Hacker Model, assembled without any carpentry. All items are available to order.
- 843items available to order
- 4scales: H0, TT, N and Märklin C
- 6 and 16 cmthe two baseboard heights

What makes I-Track
- A precision system: Hacker Model Production, in Řevničov in the Czech Republic, designs I-Track as the basic structure of your layout: baseboards, frames and track formations cut to fit together.
- On several levels: baseboards 6 and 16 cm high, baseboards with a 26 cm hidden station, Rondela helices and ramps to go from one level to the next.
- For your track: track beds and segments for H0, TT, N and Märklin C track, Rondela helices for Märklin, Roco, Piko, Peco, Tillig, Fleischmann and Minitrix.
- CarMotion roads: road beds and asphalt plates for the Viessmann CarMotion system in H0, up to the complete module with its roads.
- Portable modules: modules on aluminium legs, quick to set up, easy to transport and store, and understructures in planed wood, 66 or 76 cm high.
- To order, with advice: online ordering coming soon. Until then, we advise you, order and deliver, or you collect your order in Rolle.
Catalogue to download
The whole system, layout plans and dimensions, in the manufacturer's documents.
- I-Track catalogue 2024: 40 pages, in German, English and Czech (PDF, 15.5 Mo)
- New for autumn 2026: 4 pages on CarMotion, in German and English (PDF, 3.5 Mo)
The I-Track families
Baseboards and structure
74 itemsBaseboards 6 cmThe base of the layout, rectangular or triangular, loose or already glued.See the items
55 itemsBaseboards 16 cmTaller, to house points, motors and wiring under the track.See the items
14 itemsBaseboards for turntablesCut for Roco, Fleischmann, Trix and Märklin turntables.See the items
24 itemsBaseboards with hidden stationA hidden station under the scenic level, 26 cm high.See the items
17 itemsSide wallsTransparent or solid walls to close baseboards and hidden station.See the items
65 itemsWooden understructuresPlaned wood, 66 or 76 cm high, to stand the baseboards on.See the items
22 itemsModules and control panelsModules on legs, starter boards for table layouts, control panels.See the itemsThe track formation
74 itemsH0 track formation segmentsStraights, curves, bridges and ramps to raise the H0 track.See the items
40 itemsSegments for Märklin CThe same formation, to the geometry of Märklin C track.See the items
52 itemsTT track formation segmentsStraights, curves and bridges to TT track radii.See the items
46 itemsN track formation segmentsStraights, curves and bridges to N track radii.See the items
56 itemsTrack bedsUnder the track, for H0, TT, N and Märklin C, straight and curved.See the items
76 itemsRamps and embankmentsRamps, embankments and track underlays for gentle gradients.See the items
82 itemsRondela helicesHelices to change level in a small space, from N to H0.See the items
90 itemsTemplates, spacers and postsLaying templates, spacers for parallel tracks and posts.See the itemsCarMotion roads
76 itemsCarMotion road bedsThe road elements that guide the CarMotion vehicles.See the items
34 itemsAsphalt road platesThe finished road surface, with or without a zebra crossing.See the items
44 itemsCarMotion segments and modulesMounting posts, segments, holders for the charger, complete modules.See the itemsAll I-Track items
Practical mounting ring for under-baseplate installation of the Viessmann V8408 CarMotion inductive charger (L). It is simply screwed to the underside of the base plate, so the charger sits flush with the top of the plate and is fixed at the desired height with a single screw. If needed, loosening three screws allows immediate removal without damaging the road surface.
On order
Practical bracket for under-baseplate installation of the Viessmann V8448 / V8445 CarMotion road branch (W). It is simply screwed to the underside of the base plate, so the unit sits flush with the top of the plate and is fixed at the desired height with a single screw. If needed, loosening three screws allows immediate removal without damaging the road surface.
On order
Mounting kit for fastening starter plates and modules.
On order
Straight road bed element for installing the magnetic tape (1 mm) of the Car-Motion system. It serves as the base/centre piece for one- or two-lane straight road sections. The set contains 36 centre pieces each measuring 1.35 × 20 cm, for a total length of 7.2 metres.
On order
Flexible road bed element for installing the magnetic tape (1 mm) of the Car-Motion system. It serves as a flexible base for straight and curved, one- or two-lane road sections. The set contains 36 flexible centre pieces each measuring 1.35 × 20 cm, for a total length of 7.2 metres.
On order
Transition segment used to change the spacing between the guide magnetic strips. For curves with a radius of less than 20 cm, it is used together with the FLEXI transition element HCT9403T and the FLEXI segments 2.85 cm HCT9402F to increase the magnetic strip spacing to 1 cm. At the end of the curve, the same element is used again to return to the standard spacing of 4 cm on straight sections.
On order
Central element of the road bed for installing the magnetic strip of the Car-Motion system, for straight two-lane road sections. Contains 14 central elements, each 3.7 × 20 cm, total length 2.8 metres.
On order
Flexible central element of the road bed for installing the magnetic strip of the Car-Motion system, for curved two-lane road sections. Contains 14 FLEXI central elements, each 3.7 × 20 cm, total length 2.8 metres.
On order
Side element of the road bed for installing the magnetic strip of the Car-Motion system, used as the outer part of the road. Contains 18 side elements, each 2.85 × 20 cm, total length 3.6 metres.
On order
Flexible side element of the road bed for installing the magnetic strip of the Car-Motion system, used as the outer part of curved road sections. Contains 18 FLEXI side elements, each 2.85 × 20 cm, total length 3.6 metres.
On order
Transition segment for curves with a radius of less than 20 cm: this FLEXI transition element is used before continuing the track with FLEXI segments 2.85 cm (HCT9402F). This increases the spacing of the guide magnetic strips to 1 cm, allowing even longer vehicles and buses to pass each other safely in curves. At the end of the curve, the same transition element is used again to return to the standard spacing of 4 cm for the guide magnetic strips on straight sections.
On order
Straight road bed element for installing the magnetic strip, 1 mm thick. Base for creating straight single or double lane road sections. Includes 26 side parts of the road bed, each 1.85 × 20 cm, total length 5.2 metres.
On order
Includes I-Track components: substructures, base plates, base plates with hidden storage yard, two-track Rondela helix, track beds, ramps, embankments and signal boxes, designed for H0 ROCO Line, with detailed assembly instructions and video. Track, buildings, trains and electronics are not included but can be ordered according to the enclosed list.
On order
Suitable for Fleischmann / MiniTrix N track. Includes I-Track components: frame, base plates, base plates with hidden storage yard, two-track Rondela helix, track beds, access ramps, embankments as well as holders for tablet and switch, with detailed assembly instructions and a list of all required tracks and parts. Track, buildings, trains and electronics are not included but can be ordered according to the enclosed list.
On order
Includes I-Track components: substructures, base plates, base plates with hidden storage yard, two-track Rondela helix, track beds, ramps, embankments and signal boxes, designed for H0 Märklin C and TRIX H0, with detailed assembly instructions and video. Track, buildings, trains and electronics are not included but can be ordered according to the enclosed list.
On order
Flexi element road bed for installing the magnetic strip, 1 mm. Base for the flexible creation of single- or two-lane road sections (straight and curved). Contains 26 FLEXI side parts of the road bed, each 1.85 × 20 cm, total length 5.2 metres.
On order
Transition segment. For curves with a radius of less than 20 cm, the FLEXI transition element HCT9403T is used and the track is continued with FLEXI segments 2.85 cm HCT9402F, which increases the spacing of the guide magnetic strips to 1 cm, allowing longer vehicles and buses to safely pass each other in curves. At the end of the curve, the same transition element is used again to return to the standard spacing of 4 cm of the guide magnetic strips on straight tracks.
On order
Straight element road bed for installing the magnetic strip, 1 mm. Base for creating straight single- or two-lane road sections. Contains 16 road bed elements, each 3.35 × 20 cm, total length 3.2 metres.
On order
Flexi element road bed for installing the magnetic strip, 1 mm. Used as the centre part for curved two-lane road sections. Contains 16 FLEXI centre parts of the road bed, each 3.35 × 20 cm, total length 3.2 metres.
On order
Transition segment. For curves with a radius of less than 20 cm, the FLEXI transition element HCT9404T is used and the track is continued with FLEXI segments 3.35 cm HCT9404F, which increases the spacing of the guide magnetic strips to 1.5 cm, allowing longer vehicles and buses to safely pass each other in curves. At the end of the curve, the same transition element is used again to return to the standard spacing of 4 cm of the guide magnetic strips on straight tracks.
On order
I-Track road bed plate for the T-crossing 90° two-lane in the CarMotion system, made of 1 mm thick material for gluing. With pre-cut grooves for the 3×1 mm magnetic tape (V8430) and openings for the Viessmann mechanical turnouts (V8448 or V8445). Contains 2 pieces, L 29.7 × B 21 cm.
On order
I-Track road bed plate for the CarMotion system, with factory pre-cut grooves for the 3×1 mm magnetic tape (item no. V8430) and pre-cut openings for mounting the mechanical Viessmann switches (item no. V8448 or V8445). The plate is glued directly onto the base, for example with classic wood glue or Hacker's industrial CA super glue. Contains 2 pieces, L 22.5 x W 21 cm.
On order
Asphalt road plate for a 60° crossing to the right. Contains 2 pieces.
On order
Road bedding plate made of a special 1 mm thick material, glued directly onto the base (with classic wood glue or Hacker's industrial CA super glue). The grooves are precisely pre-cut at the factory for the 3×1 mm magnetic tape (item no. V8430); the crossing plates additionally feature pre-cut openings for mounting the Viessmann mechanical turnouts (item no. V8448 or V8445), which only require a 35 mm hole to be drilled before being fixed underneath the base plate with the I-Track holder W (item no. HCT8408W).
On order