Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Trix H0 and Minitrix

Trix, SBB and European trains in H0 and N

Crocodile, Landilok, Swiss Express Re 4/4 II and Giruno of the SBB, BLS Ae 6/8, plus trains from Germany and across Europe: Trix models the railway in 1:87 on two-rail DC, and in 1:160 with Minitrix.

Choose a family See all items

  • 692items in the shop
  • 1:87 and 1:160Trix H0 and Minitrix
  • Since 1964Minitrix and NEM two-rail
SBB Be 6/8 II Crocodile locomotive, Trix H0 model in 1:87, on a scenic layout

What Trix brings to your layout

  • The great Swiss locomotives: Be 6/8 II Crocodile, Ae 8/14 Landilok, Swiss Express Re 4/4 II, Giruno and RAe 4/8 Churchill of the SBB, Ae 6/8 and Re 420 of the BLS.
  • Two-rail, direct current: since 1964 Trix has run on two-rail DC to NEM standards. The models run on analogue or DCC layouts and register via mfx in the märklin digital system.
  • Minitrix, N scale: launched in 1964, Minitrix covers 1:160: locomotives, coaches, wagons and a complete track system, also with concrete sleepers.
  • A Nuremberg house: grown out of the firm J. Hafner, founded in 1838, Trix has been part of the Märklin group since 1997.

Our favourites for a Swiss layout

Class Be 6/8 II "Crocodile" Electric Locomotive
Trix 25596 Scale H0
Class Be 6/8 II "Crocodile" Electric Locomotive

Prototype Electric locomotive, series Be 6/8 II "Krokodil" of the Swiss Federal Railways (SBB). Type from the first production series. Basic fir green paint scheme. With 2 cab doors, wide shunting steps on the engine hoods and bow-shaped grab rails, sleeve buffers, without transition plates, with a wrong-line signal and Signum-Integra magnets. Locomotive running number 13254. The locomotive looks as it did between 1960 and 1965. Model The locomotive has a digital decoder and extensive sound functions. It also has 2 regulated high-performance drives with flywheels, 1 motor in each drive bogie. 3 axles and a jackshaft powered in each. Traction tyres. Articulated running gear able to negotiate tight curves. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details. 3-part locomotive body with engine hoods that swing out. Detailed roof equipment with a safety grille below the pantographs. Length over the buffers 22.3 cm. Highlights Highly detailed metal version Prototypically adapted details with only 2 cab doors and wide shunting steps Locomotive with 2 high-performance drives and flywheels With a RailCom-capable DCC/mfx digital decoder and a variety of operating and sound functions

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 519.90 RRP CHF 559.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Class RABe 501 Giruno High-Speed Rail Car Train
Trix 25810 Scale H0
Class RABe 501 Giruno High-Speed Rail Car Train

Prototype EC 250 electric high-speed multiple unit as the RABe 501 "Giruno" of the Swiss Federal Railways (SBB). 1 end car A (Bt1), 2nd class. 1 intermediate car F (B7), 2nd class, with entrances for the handicapped and a pantograph. 1 intermediate car G (WR6), with a restaurant area. 1 intermediate car H (A5), 1st class, with entrances for the handicapped and a pantograph. 1 end car L (At2), 1st class. In use as a multi-system multiple unit between Zurich Airport and Basel as well as across the Alps through the Gotthard Base Tunnel as far as Milan. Approval also planned for Germany and Austria. Train number RABe 501 003, with the "San Gottardo" coat of arms. Current operating condition 2022. Model 5-part base set. The restaurant car G and the two intermediate cars F and H arranged to the left and right of it are permanently coupled to one another by means of the Jacobs bogies. The unit has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a flywheel, centrally mounted in the restaurant car. All 4 axles in both Jacobs bogies to the left and right of the restaurant car powered using cardan shafts. Traction tyres. The cabs in the end cars have interior details. Power supply by way of the leading end car, depending on the direction of travel. Guide mechanism in the Jacobs bogies. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. They can be changed over to a single white tail lamp (Swiss lighting changeover). Additional separately controllable light functions. Interior lighting fitted as standard. The interior lighting is supplied by way of the continuous electrical connection running through the whole train. In addition, the cab lighting and the driver's desk lighting can each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for all of the lighting. The pantographs on the intermediate cars F and H can each be raised and lowered separately as a digital function. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the base set approximately 112 cm. Highlights Completely new tooling True-to-scale reproduction 1:87. LED interior lighting fitted as standard Cab lighting and driver's desk lighting can be controlled digitally Pantographs on the intermediate cars F and H can be raised and lowered by means of a digital function Digital decoder with extensive light and sound functions Train number RABe 501 003, with the "San Gottardo" coat of arms Note The 5-part base set 25810 can be expanded with the 2-part add-on car sets 23281, 23282, and 23283 to make a prototypical 11-part multiple unit.

  • 2-rail, direct current
  • Sound

Selling price: CHF 725.20 RRP CHF 839.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Class Ae 6/8 Electric Locomotive
Trix 25680 Scale H0
Class Ae 6/8 Electric Locomotive

Prototype Electric locomotive Ae 6/8 of the Bern-Lötschberg-Simplon Railway (BLS). Locomotive from the 2nd production series. Basic dark brown paint scheme with black running gear. Version in the original condition with 2 pantographs and braking resistors in the engine room. With transition plates on the ends and a wrong-line signal. Signum-Integra magnet at locomotive end II. 4 engine room windows and a louvred ventilation grille on each side. Locomotive running number 207. The locomotive looks as it did in the late 1940s/early 1950s. Model The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Both outer driving wheelsets in each drive bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. The wrong-line signal can be controlled separately digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Additional cab lighting, driver's desk lighting and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Highly detailed metal version with many separately applied details. The minimum radius for operation is 360 mm. Brake hoses and imitation screw couplings are included. Length over the buffers 23.3 cm. Highlights Completely new tooling Locomotive from the 2nd production series with the locomotive number 207 Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab, driver's desk and engine room lighting can be controlled digitally With a buffer capacitor to bridge short sections without power Buffer height to NEM standards Note A matching goods wagon set can be found under item no. 46575 in the Märklin H0 assortment, with information about the DC wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 483.65 RRP CHF 569.00

In stock: 1 on the shelf, shipped within 1-3 days

Class Ae 8/14 Electric Locomotive, Road Number 11852
Trix 25590 Scale H0
Class Ae 8/14 Electric Locomotive, Road Number 11852

Prototype Heavy double electric locomotive Ae 8/14 "Landilok" of the Swiss Federal Railways (SBB). Basic dark green paint scheme. Version with 2 pantographs. Sleeve buffers with square buffer plates. Locomotive running number 11852. The locomotive looks as it did in the early 1970s. Model The locomotive has a digital decoder and extensive light and sound functions. There is a regulated high-performance motor with a flywheel in each locomotive half. 4 axles powered in each locomotive half. The triple headlights change over with the direction of travel and 1 white tail lamp will work in conventional operation and can be controlled digitally. They can be switched over to 1 red tail lamp when the locomotive is running alone. Double "A" light function. Maintenance-free warm white and red LEDs are used for the lighting. The wrong-line signal, cab lighting and engine room lighting can be controlled digitally. Close couplers guided in a slot at the ends of the locomotive, separable close coupler between the locomotive halves. Detailed roof equipment with roof lines, insulators and roof walks as well as scissors-type pantographs. Both pantographs can be raised and lowered digitally. The minimum radius for operation is 360 mm. The cut-outs in the front aprons next to the standard pocket can be closed with the filler pieces included. Brake hoses and imitation screw couplings are included. Length over the buffers 39.1 cm. Highlights Completely new tooling Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally Red permission-to-proceed signal can also be controlled digitally Buffer height to NEM standards

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 759.00 RRP CHF 789.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Class Re 4/4 II Electric Locomotive, 1st Production Run
Trix 25420 Scale H0
Class Re 4/4 II Electric Locomotive, 1st Production Run

Prototype Electric locomotive Re 4/4 II, 1st production series, of the Swiss Federal Railways (SBB). Pebble grey/blood orange basic paint scheme as the locomotive for the Swiss Express. Running number 11141. The locomotive looks as it did starting in 1975. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and, together with one white tail lamp (Swiss lighting changeover), will work in conventional operation and can be controlled digitally. The lighting can be switched over to one red tail lamp when the locomotive is running alone. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. The shunting, warning and wrong-line signals can be controlled digitally. The cab and engine room lighting can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Detailed roof fittings with a newly tooled scissors-type pantograph. Many separately applied details such as handrails and the reproduction of the automatic coupler including the transverse linkage. The buffer height conforms to NEM standards. Brake lines, sockets, filler pieces for the pilot and the complete automatic coupler are included as separate plug-in parts. Length over the buffers 17.8 cm. Highlights Completely new tooling in a highly detailed metal version For the "50 Years of the Swiss Express" anniversary. Newly tooled scissors-type pantograph Many separately applied details such as the reproduction of the automatic coupler Cab and engine room lighting can be controlled digitally Shunting, warning and wrong-line signals can also be controlled Close couplers with a guide mechanism With a digital decoder and a wide variety of light and sound functions DCC, mfx and RailCom capable The buffer height conforms to NEM standards. With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Swiss Express Passenger Car Set
Trix 23690 Scale H0
Swiss Express Passenger Car Set

Prototype Four type EW III standard coaches of the Swiss Federal Railways (SBB/CFF/FFS). One type AD half-luggage coach, 1st class, one type WR restaurant car and two type B high-capacity coaches, 2nd class. Pebble grey/blood orange basic paint scheme of the Swiss Express. Route: Genève-Lausanne-Bern-Zürich HB. Car numbers 1, 13 and 14. Restaurant car without a car number. The coaches look as they did starting in 1975. Model Completely new tooling for the EW III coach family. Multi-coloured interior details. All coaches with LED interior lighting fitted as standard. A buffer capacitor is installed in each coach to bridge over brief interruptions in power. Restaurant car with illuminated table lamps. One high-capacity coach has tail lighting fitted as standard. Equipped with separable, current-conducting close couplers. The interior lighting works in conjunction with the restaurant car; the specified vehicle sequence must be observed for this. There is a digital interface in the restaurant car for fitting a function decoder to control various light functions. Type-specific bogies, roof shapes, side walls and underframes with many applied details. Buffer height according to NEM. Separately applied vents, handrails, control lines and steps on the bogies. Printed destination boards and car numbers. Two plug-in transfer end doors, which were fitted on the prototype for transfer runs, are included with each coach. An imitation of an automatic coupler is also included with the coach with car number 14. All coaches individually packaged in additional outer packaging. The minimum radius for operation is 360 mm. Length over the buffers approx. 113.2 cm. Highlights Completely new tooling for the EW III coach family For the "50 years of the Swiss Express" anniversary. Multi-coloured interior details LED interior lighting fitted as standard with buffer capacitors One coach with built-in tail lighting Restaurant car with illuminated table lamps Restaurant car equipped with a digital interface Separable, current-conducting close couplers Many separately applied details Buffer height according to NEM

Selling price: CHF 339.15 RRP CHF 399.00

In stock: 3 on the shelf, shipped within 1-3 days

11% off the recommended price
Class Re 420 Electric Locomotive
Trix 16884 Scale N
Class Re 420 Electric Locomotive

Prototype Class Re 420 electric locomotive of the BLS, wheel arrangement Bo´Bo´, built starting in 1966 for the SBB. The locomotive looks as it did around 2017. Basic paint scheme in white aluminium, with square lamps and one single-arm pantograph. Use: Fast passenger trains. Model The locomotive has a built-in digital decoder and sound generator for operation with mfx and DCC. Motor with a flywheel, 4 axles powered, traction tyres. Headlights and tail lamps changing over with the direction of travel, with warm white LEDs (the tail signal can be switched over and turned off), cab lighting, can be controlled digitally. Length over the buffers 93 mm. Highlights Sound Cab lighting

  • Digital
  • Sound

Selling price: CHF 299.00 RRP CHF 339.00

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
Swiss Express Express Train Car Set Part 1
Trix 18720 Scale N
Swiss Express Express Train Car Set Part 1

Prototype 4 different express coaches of the types EW III of the Swiss Federal Railways (SBB) in the Swiss Express paint scheme, consisting of 1x 1st class with baggage compartment (AD), 1x express train restaurant car (WR) and 2x 2nd class (B). The coaches look as they did around 1975. Model With a guide mechanism for close couplers. Prepared for the later installation of interior lighting. Total length over the buffers 616 mm. The matching interior lighting: 66616 LED interior lighting.

Selling price: CHF 229.00 RRP CHF 269.00

In stock: 1 on the shelf, shipped within 1-3 days

All Trix items

Filter products
14% off the recommended price
Minitrix Left Turnout Length 104.2 mm / 4-1/8"
Trix 14951 Scale N
Minitrix Left Turnout Length 104.2 mm / 4-1/8"

Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix left-hand point 30°/24°. Straight track 104.2 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curve radius = R 1 - 24° or, with a 6° track plugged on, = R 1- 30°. Stop-point function optional. An electromagnetic drive can be fitted later. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 25.50 RRP CHF 29.99

In stock, shipped within 1-3 days

14% off the recommended price
Left Turnout Lantern
Trix 66741 Scale N
Left Turnout Lantern

Point lantern, left

Selling price: CHF 3.85 RRP CHF 4.49

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 112.6 mm / 4-7/16"
Trix 14500 Scale N
Minitrix Straight Track with Concrete Ties Length 112.6 mm / 4-7/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 112.6 mm. This corresponds to the length of the 14538 and 14539 points. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 112.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Flex Track with Concrete Ties Length 730 mm / 28-3/4"
Trix 14501 Scale N
Minitrix Flex Track with Concrete Ties Length 730 mm / 28-3/4"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 730 mm = 7 x 14504. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 730 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 6.55 RRP CHF 7.69

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Straight Track with Concrete Ties Length 312.6 mm / 12-5/16"
Trix 14502 Scale N
Minitrix Straight Track with Concrete Ties Length 312.6 mm / 12-5/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 312.6 mm = 3 x 14504. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 312.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 4.55 RRP CHF 5.29

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 17.5 mm / 11/16"
Trix 14503 Scale N
Minitrix Straight Track with Concrete Ties Length 17.5 mm / 11/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 17.5 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 17.5 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 104.2 mm / 4-1/8"
Trix 14504 Scale N
Minitrix Straight Track with Concrete Ties Length 104.2 mm / 4-1/8"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 104.2 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 104.2 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 76.3 mm / 3"
Trix 14505 Scale N
Minitrix Straight Track with Concrete Ties Length 76.3 mm / 3"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 76.3 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 76.3 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 54.2 mm / 2-1/8"
Trix 14506 Scale N
Minitrix Straight Track with Concrete Ties Length 54.2 mm / 2-1/8"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 54.2 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 54.2 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 50.0 mm / 2"
Trix 14507 Scale N
Minitrix Straight Track with Concrete Ties Length 50.0 mm / 2"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 50.0 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 50.0 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 27.9 mm / 1-1/8"
Trix 14508 Scale N
Minitrix Straight Track with Concrete Ties Length 27.9 mm / 1-1/8"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 27.9 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 27.9 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 33.6 mm / 1-5/16"
Trix 14509 Scale N
Minitrix Straight Track with Concrete Ties Length 33.6 mm / 1-5/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 33.6 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 33.6 mm The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"
Trix 14510 Scale N
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model R 2a (261.8 mm) - 30°. Circle = 12 pieces of track. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a curved track with concrete sleepers 261.8 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.75 RRP CHF 3.19

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"
Trix 14511 Scale N
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 2a (261.8 mm) - 15°. Circle = 24 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 261.8 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 329.0 mm / 12-15/16"
Trix 14513 Scale N
Minitrix Curved Track with Concrete Ties Radius 329.0 mm / 12-15/16"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 3 (329.0 mm) - 7.5°. 2 tracks = 14517. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 329.0 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 362.6 mm / 14-1/8"
Trix 14514 Scale N
Minitrix Curved Track with Concrete Ties Radius 362.6 mm / 14-1/8"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 4 (362.6 mm) - 7.5°. 2 tracks = 14527. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 362.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 492.6 mm / 19-3/8"
Trix 14515 Scale N
Minitrix Curved Track with Concrete Ties Radius 492.6 mm / 19-3/8"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 5 (492.6 mm) - 7.5°. 2 tracks = 14518. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 492.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 526.2 mm / 20-3/4"
Trix 14516 Scale N
Minitrix Curved Track with Concrete Ties Radius 526.2 mm / 20-3/4"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 6 (526.2 mm) - 7.5°. 2 tracks = 14528. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 526.2 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 329.0 mm / 12-15/16"
Trix 14517 Scale N
Minitrix Curved Track with Concrete Ties Radius 329.0 mm / 12-15/16"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 3 (329.0 mm) - 15°. Circle = 24 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 329.0 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.75 RRP CHF 3.19

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 492.6 mm / 19-3/8"
Trix 14518 Scale N
Minitrix Curved Track with Concrete Ties Radius 492.6 mm / 19-3/8"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 5 (492.6 mm) - 15°. Circle = 24 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 492.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.75 RRP CHF 3.19

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"
Trix 14519 Scale N
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 2a (261.8 mm) - 7.5°. 2 tracks = 14511. 4 tracks = 14510. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 261.8 mm The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 295.4 mm / 11-5/8"
Trix 14520 Scale N
Minitrix Curved Track with Concrete Ties Radius 295.4 mm / 11-5/8"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 2b (295.4 mm) - 30°. Circle = 12 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 295.4 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.75 RRP CHF 3.19

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 295.4 mm / 11-5/8"
Trix 14521 Scale N
Minitrix Curved Track with Concrete Ties Radius 295.4 mm / 11-5/8"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 2b (295.4 mm) - 15°. Circle = 24 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 295.4 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.50 RRP CHF 2.89

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 228.2 mm / 9"
Trix 14522 Scale N
Minitrix Curved Track with Concrete Ties Radius 228.2 mm / 9"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 2 (228.2 mm) - 30°. Circle = 12 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 228.2 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.55 RRP CHF 2.99

In stock, shipped within 1-3 days