Trix H0 and Minitrix
Trix, SBB and European trains in H0 and N
Crocodile, Landilok, Swiss Express Re 4/4 II and Giruno of the SBB, BLS Ae 6/8, plus trains from Germany and across Europe: Trix models the railway in 1:87 on two-rail DC, and in 1:160 with Minitrix.
- 692items in the shop
- 1:87 and 1:160Trix H0 and Minitrix
- Since 1964Minitrix and NEM two-rail

What Trix brings to your layout
- The great Swiss locomotives: Be 6/8 II Crocodile, Ae 8/14 Landilok, Swiss Express Re 4/4 II, Giruno and RAe 4/8 Churchill of the SBB, Ae 6/8 and Re 420 of the BLS.
- Two-rail, direct current: since 1964 Trix has run on two-rail DC to NEM standards. The models run on analogue or DCC layouts and register via mfx in the märklin digital system.
- Minitrix, N scale: launched in 1964, Minitrix covers 1:160: locomotives, coaches, wagons and a complete track system, also with concrete sleepers.
- A Nuremberg house: grown out of the firm J. Hafner, founded in 1838, Trix has been part of the Märklin group since 1997.
The Trix families
For your H0 layout (1:87)
157 itemsLocomotives H0Crocodile, Ae 8/14, Re 4/4 II, Giruno, BLS Ae 6/8 and locomotives from Europe.See the items
43 itemsPassenger coaches H0Swiss Express, add-on coaches for the Giruno and trains from Europe.See the items
23 itemsGoods wagons H0Hupac pocket wagons, container wagons, tank wagons and low-sided wagons.See the items
40 itemsC track H0Straight and curved track, points, double slips and buffer stops.See the itemsFor your N layout (1:160), Minitrix
82 itemsMinitrix locomotivesRe 460, Re 4/4 II, SBB Cargo International Vectron, BLS Re 420.See the items
85 itemsMinitrix passenger coachesSBB Swiss Express, BLS EW III coaches and trains from Europe.See the items
50 itemsMinitrix goods wagonsSBB Cargo coop container wagon, tank wagons, self-unloading wagons.See the items
100 itemsMinitrix trackStraight and curved track, points and crossings, also with concrete sleepers.See the itemsAll Trix items
Prototype The Trix H0 slim left-hand point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 slim left-hand point with a length of 236.1 mm / diverging track radius of 1,114.6 mm. Point curve 12.1°. Polarisable 10° common crossing made of metal. 2 tracks 62071 are required at the end of the point, a matching ballast section is included. With a manual control lever. The 74491 electric drive, 74470/74471 point lantern and 74462 digital decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance. Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 left-hand curved point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 left-hand curved point with an inner curve R3 of 515 mm / 30°. Outer curve: 30° at a parallel circle spacing of 64 mm. With a manual control lever. 2 tracks 62315 are required in the inner curve of the point, a matching ballast section is included. Metal common crossing can be polarised. The 74491 electric drive, 74462 digital decoder and 74470/74471 point lanterns can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance with ballast, sleepers and metal rails Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 right-hand curved point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 right-hand curved point with an inner curve R3 of 515 mm / 30°. Outer curve: 30° at a parallel circle spacing of 64 mm. With a manual control lever. 2 tracks 62315 are required in the inner curve of the point, a matching ballast section is included. Metal common crossing can be polarised. The 74491 electric drive, 74462 digital decoder and 74470/74471 point lanterns can be retrofitted. Length of 64.3 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance. Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
(Below-baseboard mounting on the left).
In stock, shipped within 1-3 days
Point lantern, right
In stock, shipped within 1-3 days
Decoder for all DC locomotives with a current consumption of up to 1000 mA (motor 1000 mA, lighting 200 mA). Suitable for digital locomotives with a 6-pin digital interface to NEM. Universally usable in Selectrix 1, Selectrix 2 and DCC format. Automatic analogue detection. Same locomotive address in Selectrix and DCC operation up to locomotive address 99. 7 adjustable maximum speeds. 4 adjustable motor pulse variants. Automatic load compensation. Connection for lighting function. Connection for additional functions (Aux1 and Aux2). Short-circuit protection of the motor output. Programming of additional settings by selecting address "00", e.g. fine graduation of the pulse widths (control variant), polarity reversal of the direction of travel. in Selectrix operation: 31 speed steps. 111 addresses. Braking mode with brake diode. in DCC operation: Manual speed step selection 14/28 steps. Automatic switchover to 128 speed steps. Addresses optionally short up to 127 and long up to 9999. Braking mode with DC voltage braking generators (with analogue detection switched off) and "broadcast-mode" braking generators. Dimensions approx. 14 x 9 x 2.5 mm.
In stock, shipped within 1-3 days
Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model For re-railing derailed vehicles while running. 104.2 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, swarf left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix track has solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For expanding your layout easily there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a re-railing device for track with concrete sleepers 104.2 mm The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The material and rail profile provide reliable contact for transmitting current to the wheel
In stock: 5 on the shelf, shipped within 1-3 days
Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 50.0 mm in profile construction. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, swarf left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix track has solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For expanding your layout easily there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a buffer stop with concrete sleepers 50.0 mm The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The distance between the centres of two tracks is 33.6 millimetres
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix right-hand point 30°/24°. Straight track 104.2 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curve radius = R 1 - 24° or, with a 6° track plugged on, = R 1- 30°. Stop-point function optional. An electromagnetic drive can be fitted later. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Trix H0 double slip point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 double slip point with a length of 188.3 mm / crossing angle = arc of 24.3° / radius of 437.5 mm (R2). With a manual control lever, 74491 electric drive and an illuminated point lantern. Point decoder can be retrofitted. The slip point can be used to the right and to the left. Unambiguous setting for the curved route or the through route. The electric drive and lantern are already installed. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance. Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Trix H0 crossing combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Crossing with a length of 103.3 mm, 48.6°. For double track connections or crossing parallel lines. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock: 5 on the shelf, shipped within 1-3 days
Primarily for connecting the 14901 flexible tracks to each other and to other tracks. 20 pieces/pack.
Content: 20 pc. (CHF 0.27 / 1 pc.)
In stock: 5 on the shelf, shipped within 1-3 days
Decoder for all DC locomotives with a current consumption of up to 1000 mA (motor 1000 mA, lighting 300 mA). Suitable for digital locomotives with a 14-pin digital interface (mTc14). Universally usable in Selectrix/SX2 and DCC format. Automatic digital and analogue detection. Adjustable maximum speed. Adjustable motor pulse variants. Automatic load compensation. Connection for lighting function. Connection for additional function. Short-circuit protection of the motor output. Overload protection of the lighting output. Overload protection of the additional function. Programming of additional settings by selecting address "00", e.g. fine graduation of the pulse widths (control variant), polarity reversal of the direction of travel. in Selectrix operation: 31 speed steps. (Sx2 127 speed steps). 111 addresses. (Sx2 10,000 addresses). 1 additional function (Sx2 16 additional functions). Block section operation with simple diodes (1 or 2 stopping sections). Braking mode with brake diode. in DCC operation: Manual speed step selection 14/28 steps. Automatic switchover to 128 speed steps. Addresses optionally long or short. Braking mode with DC voltage and "broadcast-mode" braking generators. Dimensions approx. 14 x 9 x 1.8 mm.
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Minitrix crossing combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix crossing with a length of 104.2 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The length corresponds to a Minitrix 14904 straight track. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 4 on the shelf, shipped within 1-3 days
Prototype The Minitrix buffer stop combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as you wish. The ideal track system for newcomers and professionals. Model Minitrix buffer stop with a length of 50.0 mm. In profile construction. The click connection. Set up and taken down in no time. Stable and durable. The Minitrix track is the ideal track for quickly setting up a track formation on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a special stainless alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easily expanding your layout there are also various track extension sets with the item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operating reliability Quick to set up and take down
In stock: 4 on the shelf, shipped within 1-3 days
Prototype Two type EW III standard coaches of the Swiss Federal Railways (SBB/CFF/FFS). One type A high-capacity coach, 1st class, and one type B high-capacity coach, 2nd class. Pebble grey/blood orange basic paint scheme of the Swiss Express. Route: Genève-Lausanne-Bern-Zürich HB. Car numbers 2 and 12. The coaches look as they did starting in 1975. Model Completely new tooling for the EW III coach family. Multi-coloured interior details. Both coaches with LED interior lighting fitted as standard. A buffer capacitor is installed in each coach to bridge over brief interruptions in power. Equipped with separable, current-conducting close couplers. The interior lighting works in conjunction with the restaurant car from the 23690 set; the specified vehicle sequence must be observed for this. Type-specific bogies, roof shapes, side walls and underframes with many applied details. Buffer height according to NEM. Separately applied vents, handrails, control lines and steps on the bogies. Printed destination boards and car numbers. Two plug-in transfer end doors, which were fitted on the prototype for transfer runs, are included with each coach. In addition, a set of transfers with four additional running numbers and car numbers is included with each of the two coaches. Together with the 23690 set, a prototypical 14-part train set can be made up by using five add-on sets. Both coaches individually packaged in additional outer packaging. The minimum radius for operation is 360 mm. Length over the buffers approx. 56.6 cm. Highlights Completely new tooling for the EW III coach family For the "50 years of the Swiss Express" anniversary. Multi-coloured interior details LED interior lighting fitted as standard with buffer capacitors Separable, current-conducting close couplers Many separately applied details Buffer height according to NEM. With a set of transfers with additional running numbers and car numbers
In stock: 4 on the shelf, shipped within 1-3 days
Prototype The Trix H0 slim double slip point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 slim double slip point with a length of 236.1 mm / crossing angle of 12.1°. With a built-in 74491 electric drive. With a manual control lever. 4 tracks 62071 are required at the ends of the double slip point (not included in 62720). 2 matching ballast wedges are included. The 74477 point lantern and 74467 digital decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock: 4 on the shelf, shipped within 1-3 days
For easy switching of reversing loops in the DCC and Selectrix systems. No solenoid switch is required. Also suitable for computer operation. Polarity changeover optionally by means of short-circuit detection or sensor tracks (current sensors). Suitable for Minitrix and Trix H0.
In stock: 4 on the shelf, shipped within 1-3 days
Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model Point - 15° with a polarised common crossing. Straight track 112.6 mm. Curve radius = R 4 -15° + 1 x 14503. An electric drive can be retrofitted. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a left-hand point with concrete sleepers 112.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The points with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel Note The common crossing of these points is made of metal and is continuously supplied with power by means of a built-in switch, i.e. a permanent current feed that is automatically reversed in polarity in accordance with the respective point setting.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model Point - 15° with a polarised common crossing. Straight track 112.6 mm. Curve radius = R 4 -15° + 1 x 14903. An electric drive can be retrofitted. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a right-hand point with concrete sleepers 112.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The points with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel Note The common crossing of these points is made of metal and is continuously supplied with power by means of a built-in switch, i.e. a permanent current feed that is automatically reversed in polarity in accordance with the respective point setting.
In stock: 3 on the shelf, shipped within 1-3 days
(Below-baseboard mounting on the right).
In stock: 3 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and experts. Model Minitrix right-hand point 15° with a polarised common crossing. Straight track 112.6 mm. The click connection with the "Click". Set up and taken down in next to no time. Stable and durable. Curve radius = R 4 -15° + 1 x 14903. Stop-point function optional. An electric drive can be retrofitted. The common crossing on these points is made of metal and is constantly supplied with power via a built-in switch, i.e. a permanent power feed whose polarity is automatically reversed with the respective setting of the point. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is the careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For easily expanding the layout there are also various track extension sets with item no. 14311 and 14312. This makes it easy to build up parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operational reliability Quick setting up and taking down Note The common crossing on these points is made of metal and is constantly supplied with power via a built-in switch, i.e. a permanent power feed whose polarity is automatically reversed with the respective setting of the point.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix curved point R3/R4, left-hand, with polarised common crossing. The R3/R4 curved point was developed on the same principles as the R1/R2 curved point, except that it is matched to radii R3 and R4 and that a curve angle of 30° can be allowed for. The track alignment is therefore considerably slimmer. Even so, the space required is still not too great for smaller layouts. Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling Note Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix curved point, left-hand, R1/R2. The R1/R2 curved point is specially matched to the curved tracks of these two radii, i.e. the inner curve of the point corresponds to radius 1, the outer one to radius 2. In both cases, however, it is a curve of special shaping, in order to allow these points to be used as versatilely as possible. Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling Note Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted.
In stock: 3 on the shelf, shipped within 1-3 days