Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Trix H0 and Minitrix

Trix, SBB and European trains in H0 and N

Crocodile, Landilok, Swiss Express Re 4/4 II and Giruno of the SBB, BLS Ae 6/8, plus trains from Germany and across Europe: Trix models the railway in 1:87 on two-rail DC, and in 1:160 with Minitrix.

Choose a family See all items

  • 692items in the shop
  • 1:87 and 1:160Trix H0 and Minitrix
  • Since 1964Minitrix and NEM two-rail
SBB Be 6/8 II Crocodile locomotive, Trix H0 model in 1:87, on a scenic layout

What Trix brings to your layout

  • The great Swiss locomotives: Be 6/8 II Crocodile, Ae 8/14 Landilok, Swiss Express Re 4/4 II, Giruno and RAe 4/8 Churchill of the SBB, Ae 6/8 and Re 420 of the BLS.
  • Two-rail, direct current: since 1964 Trix has run on two-rail DC to NEM standards. The models run on analogue or DCC layouts and register via mfx in the märklin digital system.
  • Minitrix, N scale: launched in 1964, Minitrix covers 1:160: locomotives, coaches, wagons and a complete track system, also with concrete sleepers.
  • A Nuremberg house: grown out of the firm J. Hafner, founded in 1838, Trix has been part of the Märklin group since 1997.

Our favourites for a Swiss layout

Class Be 6/8 II "Crocodile" Electric Locomotive
Trix 25596 Scale H0
Class Be 6/8 II "Crocodile" Electric Locomotive

Prototype Electric locomotive, series Be 6/8 II "Krokodil" of the Swiss Federal Railways (SBB). Type from the first production series. Basic fir green paint scheme. With 2 cab doors, wide shunting steps on the engine hoods and bow-shaped grab rails, sleeve buffers, without transition plates, with a wrong-line signal and Signum-Integra magnets. Locomotive running number 13254. The locomotive looks as it did between 1960 and 1965. Model The locomotive has a digital decoder and extensive sound functions. It also has 2 regulated high-performance drives with flywheels, 1 motor in each drive bogie. 3 axles and a jackshaft powered in each. Traction tyres. Articulated running gear able to negotiate tight curves. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details. 3-part locomotive body with engine hoods that swing out. Detailed roof equipment with a safety grille below the pantographs. Length over the buffers 22.3 cm. Highlights Highly detailed metal version Prototypically adapted details with only 2 cab doors and wide shunting steps Locomotive with 2 high-performance drives and flywheels With a RailCom-capable DCC/mfx digital decoder and a variety of operating and sound functions

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 519.90 RRP CHF 559.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Class RABe 501 Giruno High-Speed Rail Car Train
Trix 25810 Scale H0
Class RABe 501 Giruno High-Speed Rail Car Train

Prototype EC 250 electric high-speed multiple unit as the RABe 501 "Giruno" of the Swiss Federal Railways (SBB). 1 end car A (Bt1), 2nd class. 1 intermediate car F (B7), 2nd class, with entrances for the handicapped and a pantograph. 1 intermediate car G (WR6), with a restaurant area. 1 intermediate car H (A5), 1st class, with entrances for the handicapped and a pantograph. 1 end car L (At2), 1st class. In use as a multi-system multiple unit between Zurich Airport and Basel as well as across the Alps through the Gotthard Base Tunnel as far as Milan. Approval also planned for Germany and Austria. Train number RABe 501 003, with the "San Gottardo" coat of arms. Current operating condition 2022. Model 5-part base set. The restaurant car G and the two intermediate cars F and H arranged to the left and right of it are permanently coupled to one another by means of the Jacobs bogies. The unit has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a flywheel, centrally mounted in the restaurant car. All 4 axles in both Jacobs bogies to the left and right of the restaurant car powered using cardan shafts. Traction tyres. The cabs in the end cars have interior details. Power supply by way of the leading end car, depending on the direction of travel. Guide mechanism in the Jacobs bogies. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. They can be changed over to a single white tail lamp (Swiss lighting changeover). Additional separately controllable light functions. Interior lighting fitted as standard. The interior lighting is supplied by way of the continuous electrical connection running through the whole train. In addition, the cab lighting and the driver's desk lighting can each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for all of the lighting. The pantographs on the intermediate cars F and H can each be raised and lowered separately as a digital function. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the base set approximately 112 cm. Highlights Completely new tooling True-to-scale reproduction 1:87. LED interior lighting fitted as standard Cab lighting and driver's desk lighting can be controlled digitally Pantographs on the intermediate cars F and H can be raised and lowered by means of a digital function Digital decoder with extensive light and sound functions Train number RABe 501 003, with the "San Gottardo" coat of arms Note The 5-part base set 25810 can be expanded with the 2-part add-on car sets 23281, 23282, and 23283 to make a prototypical 11-part multiple unit.

  • 2-rail, direct current
  • Sound

Selling price: CHF 725.20 RRP CHF 839.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Class Ae 6/8 Electric Locomotive
Trix 25680 Scale H0
Class Ae 6/8 Electric Locomotive

Prototype Electric locomotive Ae 6/8 of the Bern-Lötschberg-Simplon Railway (BLS). Locomotive from the 2nd production series. Basic dark brown paint scheme with black running gear. Version in the original condition with 2 pantographs and braking resistors in the engine room. With transition plates on the ends and a wrong-line signal. Signum-Integra magnet at locomotive end II. 4 engine room windows and a louvred ventilation grille on each side. Locomotive running number 207. The locomotive looks as it did in the late 1940s/early 1950s. Model The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Both outer driving wheelsets in each drive bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. The wrong-line signal can be controlled separately digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Additional cab lighting, driver's desk lighting and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Highly detailed metal version with many separately applied details. The minimum radius for operation is 360 mm. Brake hoses and imitation screw couplings are included. Length over the buffers 23.3 cm. Highlights Completely new tooling Locomotive from the 2nd production series with the locomotive number 207 Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab, driver's desk and engine room lighting can be controlled digitally With a buffer capacitor to bridge short sections without power Buffer height to NEM standards Note A matching goods wagon set can be found under item no. 46575 in the Märklin H0 assortment, with information about the DC wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 483.65 RRP CHF 569.00

In stock: 1 on the shelf, shipped within 1-3 days

Class Ae 8/14 Electric Locomotive, Road Number 11852
Trix 25590 Scale H0
Class Ae 8/14 Electric Locomotive, Road Number 11852

Prototype Heavy double electric locomotive Ae 8/14 "Landilok" of the Swiss Federal Railways (SBB). Basic dark green paint scheme. Version with 2 pantographs. Sleeve buffers with square buffer plates. Locomotive running number 11852. The locomotive looks as it did in the early 1970s. Model The locomotive has a digital decoder and extensive light and sound functions. There is a regulated high-performance motor with a flywheel in each locomotive half. 4 axles powered in each locomotive half. The triple headlights change over with the direction of travel and 1 white tail lamp will work in conventional operation and can be controlled digitally. They can be switched over to 1 red tail lamp when the locomotive is running alone. Double "A" light function. Maintenance-free warm white and red LEDs are used for the lighting. The wrong-line signal, cab lighting and engine room lighting can be controlled digitally. Close couplers guided in a slot at the ends of the locomotive, separable close coupler between the locomotive halves. Detailed roof equipment with roof lines, insulators and roof walks as well as scissors-type pantographs. Both pantographs can be raised and lowered digitally. The minimum radius for operation is 360 mm. The cut-outs in the front aprons next to the standard pocket can be closed with the filler pieces included. Brake hoses and imitation screw couplings are included. Length over the buffers 39.1 cm. Highlights Completely new tooling Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally Red permission-to-proceed signal can also be controlled digitally Buffer height to NEM standards

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 759.00 RRP CHF 789.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Class Re 4/4 II Electric Locomotive, 1st Production Run
Trix 25420 Scale H0
Class Re 4/4 II Electric Locomotive, 1st Production Run

Prototype Electric locomotive Re 4/4 II, 1st production series, of the Swiss Federal Railways (SBB). Pebble grey/blood orange basic paint scheme as the locomotive for the Swiss Express. Running number 11141. The locomotive looks as it did starting in 1975. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and, together with one white tail lamp (Swiss lighting changeover), will work in conventional operation and can be controlled digitally. The lighting can be switched over to one red tail lamp when the locomotive is running alone. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. The shunting, warning and wrong-line signals can be controlled digitally. The cab and engine room lighting can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Detailed roof fittings with a newly tooled scissors-type pantograph. Many separately applied details such as handrails and the reproduction of the automatic coupler including the transverse linkage. The buffer height conforms to NEM standards. Brake lines, sockets, filler pieces for the pilot and the complete automatic coupler are included as separate plug-in parts. Length over the buffers 17.8 cm. Highlights Completely new tooling in a highly detailed metal version For the "50 Years of the Swiss Express" anniversary. Newly tooled scissors-type pantograph Many separately applied details such as the reproduction of the automatic coupler Cab and engine room lighting can be controlled digitally Shunting, warning and wrong-line signals can also be controlled Close couplers with a guide mechanism With a digital decoder and a wide variety of light and sound functions DCC, mfx and RailCom capable The buffer height conforms to NEM standards. With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Swiss Express Passenger Car Set
Trix 23690 Scale H0
Swiss Express Passenger Car Set

Prototype Four type EW III standard coaches of the Swiss Federal Railways (SBB/CFF/FFS). One type AD half-luggage coach, 1st class, one type WR restaurant car and two type B high-capacity coaches, 2nd class. Pebble grey/blood orange basic paint scheme of the Swiss Express. Route: Genève-Lausanne-Bern-Zürich HB. Car numbers 1, 13 and 14. Restaurant car without a car number. The coaches look as they did starting in 1975. Model Completely new tooling for the EW III coach family. Multi-coloured interior details. All coaches with LED interior lighting fitted as standard. A buffer capacitor is installed in each coach to bridge over brief interruptions in power. Restaurant car with illuminated table lamps. One high-capacity coach has tail lighting fitted as standard. Equipped with separable, current-conducting close couplers. The interior lighting works in conjunction with the restaurant car; the specified vehicle sequence must be observed for this. There is a digital interface in the restaurant car for fitting a function decoder to control various light functions. Type-specific bogies, roof shapes, side walls and underframes with many applied details. Buffer height according to NEM. Separately applied vents, handrails, control lines and steps on the bogies. Printed destination boards and car numbers. Two plug-in transfer end doors, which were fitted on the prototype for transfer runs, are included with each coach. An imitation of an automatic coupler is also included with the coach with car number 14. All coaches individually packaged in additional outer packaging. The minimum radius for operation is 360 mm. Length over the buffers approx. 113.2 cm. Highlights Completely new tooling for the EW III coach family For the "50 years of the Swiss Express" anniversary. Multi-coloured interior details LED interior lighting fitted as standard with buffer capacitors One coach with built-in tail lighting Restaurant car with illuminated table lamps Restaurant car equipped with a digital interface Separable, current-conducting close couplers Many separately applied details Buffer height according to NEM

Selling price: CHF 339.15 RRP CHF 399.00

In stock: 3 on the shelf, shipped within 1-3 days

11% off the recommended price
Class Re 420 Electric Locomotive
Trix 16884 Scale N
Class Re 420 Electric Locomotive

Prototype Class Re 420 electric locomotive of the BLS, wheel arrangement Bo´Bo´, built starting in 1966 for the SBB. The locomotive looks as it did around 2017. Basic paint scheme in white aluminium, with square lamps and one single-arm pantograph. Use: Fast passenger trains. Model The locomotive has a built-in digital decoder and sound generator for operation with mfx and DCC. Motor with a flywheel, 4 axles powered, traction tyres. Headlights and tail lamps changing over with the direction of travel, with warm white LEDs (the tail signal can be switched over and turned off), cab lighting, can be controlled digitally. Length over the buffers 93 mm. Highlights Sound Cab lighting

  • Digital
  • Sound

Selling price: CHF 299.00 RRP CHF 339.00

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
Swiss Express Express Train Car Set Part 1
Trix 18720 Scale N
Swiss Express Express Train Car Set Part 1

Prototype 4 different express coaches of the types EW III of the Swiss Federal Railways (SBB) in the Swiss Express paint scheme, consisting of 1x 1st class with baggage compartment (AD), 1x express train restaurant car (WR) and 2x 2nd class (B). The coaches look as they did around 1975. Model With a guide mechanism for close couplers. Prepared for the later installation of interior lighting. Total length over the buffers 616 mm. The matching interior lighting: 66616 LED interior lighting.

Selling price: CHF 229.00 RRP CHF 269.00

In stock: 1 on the shelf, shipped within 1-3 days

All Trix items

Filter products
15% off the recommended price
Class G 2000 BB Vossloh Diesel Locomotive
Trix 22881 Scale H0
Class G 2000 BB Vossloh Diesel Locomotive

Prototype Heavy Vossloh G 2000 BB diesel locomotive with a symmetrical cab, as the Am 840 of the Swiss Federal Railways (SBB), used in the SBB Cargo freight division. Fire red/ultramarine blue basic paint scheme with a basalt grey frame. Locomotive running number Am 840 002-0. Operating condition of Era VI. Model Digital decoder with extensive sound and light functions. Regulated high-performance motor with a centrally mounted flywheel. All 4 axles powered using cardan shafts. Traction tyres. The triple headlights and 2 red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at Locomotive Ends 2 and 1 can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, the double "A" light function is on at both ends. The cab lighting can be controlled separately digitally for each cab. The lighting uses maintenance-free warm white and red LEDs. Many separately applied details. Metal railings along the sides of the frame. Detailed buffer beam. Plug-in brake hoses are included. Front covers are included and can additionally be mounted on the buffer beam. Length over the buffers 20 cm. Highlights Chassis and large parts of the body made of metal Cab lighting can be controlled separately digitally Double "A" light can be controlled Digital decoder with extensive operating and sound functions

  • 2-rail, direct current
  • Sound

Selling price: CHF 330.65 RRP CHF 389.00

In stock: 1 on the shelf, shipped within 1-3 days

Steam locomotive Class A3 "Flying Scotsman"
Trix 22885
Steam locomotive Class A3 "Flying Scotsman"

Prototype: Express steam locomotive with tender, Class A3. Version as a museum locomotive in Wartime Black with different running numbers applied. Operational museum condition as of early 2015, with corridor tender and smoke deflectors. Locomotive of the National Railway Museum in York. Highlights Particularly delicate metal construction. Many separately fitted details. Smoke unit installed as standard with dynamic, speed-dependent smoke output. Cab and tender gangway lighting can be controlled digitally. Prototypically lettered with three running numbers. Digital decoder with extensive operating and sound functions. DCC, mfx and RailCom capable. Buffer height on the locomotive and tender to NEM. Product description Model: With digital decoder and extensive light and sound functions. Regulated high-performance drive with flywheel in the boiler. Three axles powered. Traction tyres. Locomotive and tender mostly made of metal. Smoke unit installed as standard, with dynamic, speed-dependent smoke output, can be controlled digitally. The dual headlights on the locomotive and one lamp at the rear of the tender change over with the direction of travel; they will work in conventional operation and can be controlled digitally. The lamp at the rear of the tender can be switched to a red light. A third headlight at the front of the locomotive, as an electric lamp, can be switched on separately and switched to red lighting. Cab lighting and firebox flickering can be controlled digitally. Tender gangway lighting can be controlled digitally. Lighting with maintenance-free warm white and red LEDs. Adjustable close coupling with a guide mechanism between the locomotive and tender. Close coupling with a guide mechanism on the tender, with NEM pocket. Buffer height on the locomotive and tender to NEM. Brake hoses, imitation screw couplings and closed cylinder covers are included. Length over the buffers approx. 24.5 cm. The locomotive-specific sounds were provided to us with the kind support of Dovetail Games, Kent. You will find this model in an AC version in the Märklin H0 range under item number 39969. Licensed by SCMG Enterprises Ltd. Flying Scotsman® and designs ©SCMG. Flying Scotsman is a National Railway Museum locomotive.

Regular price: CHF 599.00

In stock: 1 on the shelf, shipped within 1-3 days

Electric locomotive Re 460
Trix 22943
Electric locomotive Re 460

Prototype: Fast general-purpose locomotive, Series Re 460, of the Swiss Federal Railways (SBB/CFF/FFS) with advertising livery for Chiquita bananas. Running number: 460 029-2. Operating condition starting in 2015. Highlights New, delicate single-arm pantographs. With centrally mounted motor. All four axles powered. Cab lighting. European and Swiss lighting changeover. Product description Model: With digital decoder and extensive sound functions. Regulated high-performance drive, centrally mounted. 4 axles powered. Traction tyres. Triple headlights and 2 red tail lamps that change over with the direction of travel will work in conventional operation and can be controlled digitally. The headlights at locomotive end 2 and end 1 can each be switched off separately digitally. Long-distance headlight can be controlled digitally. Changeover between the Swiss lighting changeover and white/red lighting changeover. Cab lighting can be controlled digitally. Lighting with maintenance-free warm white and red LEDs. New, delicate single-arm pantographs. Fitted metal handrails. Driver's cabs with interior details. Length over the buffers 21.3 cm.

Regular price: CHF 329.00

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Add-On Car Set 1 for the Class RABe 501 Giruno
Trix 23281 Scale H0
Add-On Car Set 1 for the Class RABe 501 Giruno

Prototype Add-on cars for the RABe 501 "Giruno" high-speed multiple unit of the Swiss Federal Railways (SBB). 1 intermediate car B (B11), second class, with a pantograph. 1 intermediate car C (B10), second class. Matching train number RABe 501 003 "San Gottardo". Current operating condition in 2022. Model 2-part add-on car set to expand the RABe 501 "Giruno" high-speed multiple unit to an 11-part unit. Interior lighting fitted as standard with maintenance-free warm white LEDs. The interior lighting is supplied by way of the continuous electrical connection running through the entire train and only works and can be controlled digitally in a group with the base set. The pantograph on one intermediate car can also only be raised and lowered separately as a digital function by way of the decoder in a group with the base set. Both intermediate cars are permanently coupled to each other. Guide mechanism in the Jacobs bogies. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the pair of cars 40.2 cm. Highlights Completely new tooling True-to-scale reproduction 1:87. LED interior lighting fitted as standard The pantograph can be raised and lowered separately as a digital function only in a group with the base set Matching add-on cars for train number RABe 501 003 "San Gottardo" Note The 25810 base set can be expanded with the 23281, 23282, and 23283 add-on car sets to a prototypical 11-part unit.

Selling price: CHF 249.00 RRP CHF 279.00

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Add-On Car Set 2 for the Class RABe 501 Giruno
Trix 23282 Scale H0
Add-On Car Set 2 for the Class RABe 501 Giruno

Prototype Add-on cars for the RABe 501 "Giruno" high-speed multiple unit of the Swiss Federal Railways (SBB). 1 intermediate car D (B9), second class, with a pantograph. 1 intermediate car E (B8), second class. Matching train number RABe 501 003 "San Gottardo". Current operating condition in 2022. Model 2-part add-on car set to expand the RABe 501 "Giruno" high-speed multiple unit to an 11-part unit. Interior lighting fitted as standard with maintenance-free warm white LEDs. The interior lighting is supplied by way of the continuous electrical connection running through the entire train and only works and can be controlled digitally in a group with the base set. The pantograph on one intermediate car can also only be raised and lowered separately as a digital function by way of the decoder in a group with the base set. Both intermediate cars are permanently coupled to each other. Guide mechanism in the Jacobs bogies. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the pair of cars 40.2 cm. Highlights Completely new tooling True-to-scale reproduction 1:87. LED interior lighting fitted as standard The pantograph can be raised and lowered separately as a digital function only in a group with the base set Matching add-on cars for train number RABe 501 003 "San Gottardo" Note The 25810 base set can be expanded with the 23281, 23282, and 23283 add-on car sets to a prototypical 11-part unit.

Selling price: CHF 249.00 RRP CHF 279.00

In stock: 1 on the shelf, shipped within 1-3 days

Add-On Car Set 3 for the Class RABe 501 Giruno
Trix 23283 Scale H0
Add-On Car Set 3 for the Class RABe 501 Giruno

Prototype Add-on cars for the RABe 501 "Giruno" high-speed multiple unit of the Swiss Federal Railways (SBB). 1 intermediate car J (A4), first class. 1 intermediate car K (A3), first class. Matching train number RABe 501 003 "San Gottardo". Current operating condition in 2022. Model 2-part add-on car set to expand the RABe 501 "Giruno" high-speed multiple unit to an 11-part unit. Interior lighting fitted as standard with maintenance-free warm white LEDs. The interior lighting is supplied by way of the continuous electrical connection running through the entire train and only works and can be controlled digitally in a group with the base set. Both intermediate cars are permanently coupled to each other. Guide mechanism in the Jacobs bogies. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the pair of cars 40.2 cm. Highlights Completely new tooling True-to-scale reproduction 1:87. LED interior lighting fitted as standard Matching add-on cars for train number RABe 501 003 "San Gottardo" Note The 25810 base set can be expanded with the 23281, 23282, and 23283 add-on car sets to a prototypical 11-part unit.

Regular price: CHF 249.00

In stock: 1 on the shelf, shipped within 1-3 days

Express coach set for VT 92.5
Trix 23507
Express coach set for VT 92.5

Prototype: 4 different passenger coaches of various designs in the Deutsche Bundesbahn (DB) version, for the express train with the route Nürnberg - Sulzbach-Rosenberg - Schwandorf - Furth i.W. 1 four-axle luggage van Pw4üe. 1 four-axle coach B4ywe, 2nd class. 1 four-axle rebuilt coach AB4yge, 1st/2nd class. 1 four-axle rebuilt coach B4yge, 2nd class. All coaches in bottle green basic paint scheme, with home station Nürnberg Hbf. Operating condition 1958. Highlights Train route: Nürnberg - Sulzbach-Rosenberg - Schwandorf - Furth i.W. All coaches with LED interior lighting installed as standard. Current-carrying close couplings. Interior lighting of the train formation can be controlled digitally via the current-conducting close coupling of the VT 92.5 diesel railcar. Product description Model: All coaches with LED interior lighting installed as standard and current-conducting close couplings. Via the built-in current-conducting close couplings the whole train formation can be supplied with current by the VT 92.5 diesel railcar (item 25692). Interior lighting can be controlled digitally via the diesel railcar. Total length over the buffers 91.8 cm. The matching VT 92.5 diesel railcar is also offered exclusively to Trix Club members under item number 25692. You will find this express coach set in an AC version in the Märklin H0 range under item number 41327, exclusively for Insider members. The express coach set 23507 is being produced in 2021 in a one-time series for Trix Club members only.

Regular price: CHF 269.00

In stock: 1 on the shelf, shipped within 1-3 days

Club members only (Trix Club)

14% off the recommended price New
Tank Car
Trix 24173 Scale H0
Tank Car

Prototype Tank wagon with two wheelsets of BOLTE & Co. Kg Hannover, registered with the Deutsche Bundesbahn (DB). Version with a riveted tank. With brake platform, without brake cabin. Running number 564 041. The vehicle looks as it did in 1957. Model Detailed chassis with an open-work frame. Finely reproduced and separately applied hand brake crank, braking system and discharge pipes. Applied working platform with access. Applied brake platform, without brake cabin. With slot-guided close couplings. Length over the buffers approx. 10.1 cm. AC wheelset E700150. Highlights Finely reproduced and separately applied braking system

Selling price: CHF 45.05 RRP CHF 52.99

In stock: 1 on the shelf, shipped within 1-3 days

Tank wagon Zacns
Trix 24225
Tank wagon Zacns

Prototype: Four-axle tank wagon of type Zacns with a capacity of 95 m3. Privately owned wagon of Ermewa S.A.S., registered in the Czech Republic. Graphite grey basic paint scheme. Operating condition starting in 2015. Highlights Detailed design with numerous separately fitted levers and handrails Product description Model: Bogies of the modern design type Y25Lsd1 with double brake blocks. With brake platform and end access. Separately fitted brake rigging, discharge pipes, dome covers, deflector bars and numerous other levers and handrails. Metal deflector bars. Length over the buffers approx. 19.6 cm. AC wheelset E700150. You will find another tank wagon with a different running number in the Märklin H0 range under item number 47547, with details of the replacement wheelsets required.

Regular price: CHF 59.90

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price New
Type Sdggmrss Double Pocket Car
Trix 24475 Scale H0
Type Sdggmrss Double Pocket Car

Prototype Type Sdggmrss (T3000e) 6-axle articulated double pocket car of Hupac AG. Modern transport car for combined freight traffic. Version with four folding side latches. The car looks as it did starting in 2019. Loaded with two curtain-sided semi-trailers of the Schöni shipping company. Model Both halves of the transport car made of metal, mounted movably on the middle truck. Folding side latches installed at the factory. Can be raised for transporting containers or swap bodies. Many separately applied details such as steps, brake lines and grab bars on the car ends. Type Y25 trucks. Buffer height to NEM standards. Kingpin holders in high and low versions, switching steps and air tanks for the car ends are included as separate parts to be plugged in. Loaded with two curtain-sided semi-trailers of the Schöni shipping company. Length over the buffers approx. 39.3 cm / 15-1/2". AC wheel set E376938. Highlights Detailed version made largely of metal Folding latches installed and working Many separately applied details Buffer height to NEM standards. Loaded with two semi-trailers

Selling price: CHF 135.15 RRP CHF 159.00

In stock: 1 on the shelf, shipped within 1-3 days

Trix Club wagon Trix H0 2016
Trix 24816
Trix Club wagon Trix H0 2016

Prototype: Short Bavarian goods wagon with brake cabin of the Royal Bavarian State Railways (K.Bay.Sts.B.). Version as a beer transport wagon of the "Bayerische Staatsbrauerei Weihenstephan". Highlights As part of the 500th anniversary of the German Beer Purity Law. Product description Model: Authentic livery of Era I. Delicate design of the running gear and body. Spoked wheels. Coupling pocket to NEM and close coupling mechanism. Length over the buffers 81 mm. E34301211 Märklin AC wheelset (burnished spokes, conductive). E34382604 Märklin AC wheelset (grey spokes, non-conductive). E36669300 Trix Express wheelset. The beer transport wagon 33916 is being produced in 2016 in a one-off edition for Trix Club members only.

Regular price: CHF 34.90

In stock: 1 on the shelf, shipped within 1-3 days

Club members only (Trix Club)

Trix H0 Club wagon 2020
Trix 24820
Trix H0 Club wagon 2020

Prototype: 2-axle covered van of type G10 with standard brake cabin and spoked wheels. Registered with the K.W.St.E. Era I. Product description Model: Two-axle privately owned goods wagon with fictitious lettering of the Salacher Papierfabrik. The model is without end panel reinforcements and corresponds in paint scheme and printing to Era I. With close coupling mechanism. Length over the buffers 11.0 cm. AC wheelset E34301211. The covered van 24820 is being produced in 2020 in a one-off edition for Trix Club members only.

Regular price: CHF 34.90

In stock: 1 on the shelf, shipped within 1-3 days

Club members only (Trix Club)

15% off the recommended price New
Southern Pacific freight car set
Trix 24915 Scale H0
Southern Pacific freight car set

Prototype Set consisting of five American freight cars of different types of the Southern Pacific. Three single-door boxcars, one stock car and one tank car. The cars look as they did around 1948. Model Frame and floor made of metal. Detailed trucks with special wheel sets. Boxcars and stock car with sliding doors that can be opened. Roof walkways, ladders, brake gear and other details separately applied. Couplers can be replaced. All cars individually packaged in an additional outer box. Total length over the couplers approx. 76 cm / 29-15/16". AC wheel set: E320551. DC wheel set E320389 (RP25). Highlights Attractive Southern Pacific design Many separately applied details Boxcars and stock car with sliding doors that can be opened

Selling price: CHF 228.65 RRP CHF 269.00

In stock: 1 on the shelf, shipped within 1-3 days

Electric locomotive BR 181.2
Trix 25181
Electric locomotive BR 181.2

Overcoming borders, building a common Europe: from 1974 the dual-system locomotives of Class 181.2 ran to Luxembourg and France at the head of famous trains such as the "Mozart", the TEE "Goethe" or the Moscow – Paris sleeping car train. The 181.2 hauled passenger coaches and goods wagons from all over the world for decades and changed current systems simply but reliably: at the border the driver lowered the German pantograph, coasted through a dead section and finally raised the French pantograph. Incidentally, the elegant, low locomotive body resulted from the lower-hung French overhead line. The fascinating 181.2 has written European history, and it will continue to do so on many Trix layouts: as a model of truly boundless interest. Highlights Completely new tooling. Delicate metal construction with many separately fitted details. Pantographs can be raised and lowered digitally. Pantographs fitted with different contact strips, true to the prototype. Cab and engine room lighting can be controlled digitally. Separately fitted wheel imitations. Digital decoder with extensive light and sound functions. DCC, mfx and RailCom capable. Buffer height to NEM. Product description Model: With digital decoder and extensive sound functions. Regulated high-performance drive with flywheel centrally mounted. All four axles are powered using cardan shafts. Traction tyres. Triple headlights and two red tail lamps that change over with the direction of travel will work in conventional operation and can be controlled digitally. The headlights at locomotive end 2 and end 1 can each be switched off separately digitally. Cab lighting that changes over with the direction of travel and engine room lighting can be controlled digitally. Lighting with maintenance-free warm white and red LEDs. Pantographs can be raised and lowered digitally. Separately fitted wheel imitations, handrails, windscreen wipers, UIC sockets and roof conduits. Buffer height to NEM. Brake lines, screw couplings and various sockets are included as separately pluggable parts. Length over the buffers approx. 20.6 cm. Two matching passenger coach sets of the FD 264 "Mozart" are also offered exclusively to Trix Club members under item numbers 23110 and 23111. You will find this model in an AC version in the Märklin H0 range under item number 39583, likewise exclusively for Insider Club members. The BR 181.2 electric locomotive, item number 25181, is being produced in 2023 in a one-time series for Trix Club members only.

Regular price: CHF 459.00

In stock: 1 on the shelf, shipped within 1-3 days

Club members only (Trix Club)

15% off the recommended price
Class 193 Electric Locomotive
Trix 25193 Scale H0
Class 193 Electric Locomotive

Prototype Class 193 (Vectron) electric locomotive of the Deutsche Bahn AG (DB AG), DB Cargo freight business unit. Running number 193 343. The locomotive looks as it did in 2021. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor. 4 axles powered. Traction tyres. The triple headlights and 2 red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, the double "A" light function is active at both ends. The long-distance headlights and the cab lighting can be controlled separately digitally. The shunting light NL and CH and the wrong-line signal IT and CH can each be controlled separately digitally. The lighting uses maintenance-free warm white and red LEDs. Length over the buffers approximately 21.9 cm. Highlights Chassis and body of the locomotive of die-cast zinc. Many separately applied details Cab lighting can be controlled digitally Numerous light functions can be controlled Digital decoder with extensive operating and sound functions With a RailCom-capable digital decoder

  • 2-rail, direct current
  • Sound

Selling price: CHF 339.15 RRP CHF 399.00

In stock: 1 on the shelf, shipped within 1-3 days

Class RAe 4/8 Double Powered Rail Car
Trix 25260 Scale H0
Class RAe 4/8 Double Powered Rail Car

Prototype Class RAe 4/8 electric double railcar "Churchill-Pfeil" of the Swiss Federal Railways (SBB). Used as a charter train for excursions and group trips. Fiery red basic paint scheme. Railcar running number RAe 4/8 1021. Current operating condition. Model The railcar has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a flywheel. The two axles in the outer bogie on vehicle section 1 are powered using cardan shafts. Traction tyres. Swiss lighting changeover, triple headlights, and 1 white tail lamp will work in conventional operation and can be controlled digitally. The headlights can be switched over to 1 red tail lamp. In addition, a red right-of-way signal (wrong-line signal) at the front in the direction of travel can be controlled digitally and changes over with the direction of travel. Interior lighting fitted as standard will work in conventional operation and can be controlled digitally. The cab lighting can each be controlled separately digitally. The table lamps can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. Four bogie fairings are included for exchanging for use on large radii or for display in a cabinet. Total length over the buffers approximately 53 cm. Highlights Completely new tooling Interior lighting fitted as standard. Can be switched over to a red tail lamp Cab lighting can be controlled digitally Table lamps can be controlled digitally Right-of-way signal can be controlled digitally Digital decoder with a wide variety of light and sound functions Note 75 years ago, in 1946, the Red Double Arrow was used to carry Winston Churchill as a state guest through Switzerland, which thereby gave the Double Arrow the nickname "Churchill-Pfeil".

  • 2-rail, direct current
  • Sound

Selling price: CHF 599.00 RRP CHF 619.00

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Class Ee 3/3 Electric Switch Engine
Trix 25330 Scale H0
Class Ee 3/3 Electric Switch Engine

Prototype Class Ee 3/3 electric switch engine of the Swiss Federal Railways (SBB/CFF/FFS). Basic fire red paint scheme. Second production series from 1932 on, with the cab in the center. 2 switching platforms. Locomotive running number 16352. The locomotive looks as it did around 2005. Model With a digital decoder and a miniature motor with a flywheel. 3 axles and jackshaft powered. Traction tires. Triple headlights and 2 white marker lights that change over with the direction of travel will work in conventional operation and can be controlled digitally. In addition, Swiss light changeover with one white marker light when the locomotive has cars and one red marker light when the locomotive runs light can be controlled digitally. Double A light function. Maintenance-free warm white and red LEDs are used for the lighting. With new Telex couplers on the front and rear that can each be controlled separately digitally. Coupler slack function. Applied roof equipment. Applied metal grab irons. Brake hoses and prototypical couplers can be plugged into the buffer beam. Length over the buffers 11.2 cm / 4-7/16". Note You can find this model in an AC version in the Märklin H0 assortment under item number 36354.

  • 2-rail, direct current

Selling price: CHF 302.00 RRP CHF 339.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Class Re 4/4 II Electric Locomotive, 1st Production Run
Trix 25420 Scale H0
Class Re 4/4 II Electric Locomotive, 1st Production Run

Prototype Electric locomotive Re 4/4 II, 1st production series, of the Swiss Federal Railways (SBB). Pebble grey/blood orange basic paint scheme as the locomotive for the Swiss Express. Running number 11141. The locomotive looks as it did starting in 1975. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and, together with one white tail lamp (Swiss lighting changeover), will work in conventional operation and can be controlled digitally. The lighting can be switched over to one red tail lamp when the locomotive is running alone. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. The shunting, warning and wrong-line signals can be controlled digitally. The cab and engine room lighting can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Detailed roof fittings with a newly tooled scissors-type pantograph. Many separately applied details such as handrails and the reproduction of the automatic coupler including the transverse linkage. The buffer height conforms to NEM standards. Brake lines, sockets, filler pieces for the pilot and the complete automatic coupler are included as separate plug-in parts. Length over the buffers 17.8 cm. Highlights Completely new tooling in a highly detailed metal version For the "50 Years of the Swiss Express" anniversary. Newly tooled scissors-type pantograph Many separately applied details such as the reproduction of the automatic coupler Cab and engine room lighting can be controlled digitally Shunting, warning and wrong-line signals can also be controlled Close couplers with a guide mechanism With a digital decoder and a wide variety of light and sound functions DCC, mfx and RailCom capable The buffer height conforms to NEM standards. With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price New
Type GE ES44AC Diesel Locomotive
Trix 25448 Scale H0
Type GE ES44AC Diesel Locomotive

Prototype Heavy diesel electric freight locomotive, type General Electric ES44AC, of Norfolk Southern (NS). Deep black basic paint scheme. Running number 8127. Current operating condition. Model The locomotive has a digital decoder and extensive sound and light functions. Regulated high-performance drive with a centrally mounted flywheel. Two axles in each bogie powered using cardan shafts. Traction tyres. Headlights that can be switched independently of the direction of travel, consisting of four lamps each at the front and rear of the locomotive. Headlights will work in conventional operation and can be switched off separately in pairs digitally. Cab lighting, running number plates, long-distance headlight and flashing function of the headlights can be controlled digitally. Lighting with maintenance-free warm white LEDs. With a buffer capacitor. Smoke generator fitted as standard with dynamic smoke output, can be controlled digitally. Many separately applied details. For operation with claw couplings, the NEM pocket can be fixed in place using the included clamping pieces. A rail guard with a smaller cut-out for the front, brake hoses and two clamping pieces for the NEM pocket are included. Length over the couplings approx. 27 cm. Highlights Chassis and body of the locomotive made of metal Version with additional lamps on the rear running plate Smoke generator fitted as standard with dynamic smoke output Many light and sound functions that can be controlled digitally Cab lighting can be controlled digitally Illuminated running number plates can be controlled digitally Long-distance headlight can be switched on Centrally mounted motor, four axles powered using cardan shafts Operation possible with claw couplings and standard close couplings DCC, mfx and RailCom-capable With a buffer capacitor for bridging short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 424.15 RRP CHF 499.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Siemens Desiro HC Electric Powered Train
Trix 25463 Scale H0
Siemens Desiro HC Electric Powered Train

Prototype Electric multiple unit of the type Siemens Desiro HC as the class 1462/1862 of the Deutsche Bahn AG (DB AG). One end car of the class 1462.0, 2nd class, one intermediate car of the class 1862.0, 2nd class, one intermediate car of the class 1862.5, 2nd class and one end car of the class 1462.5, 1st/2nd class. Vehicle of the Rheintal network. Livery in the Baden-Württemberg state design (bwegt). The train looks as it did starting in 2020. Model The train has a digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted in end car A. All four axles in both bogies powered using cardan shafts. Traction tyres. Power is supplied by the leading end car depending on the direction of travel. Special close couplers with a guide mechanism. The triple headlights change over with the direction of travel and, together with two red tail lamps, will work in conventional operation and can be controlled digitally. Double "A" light function. The prototypical long-distance headlight in two intensities, the cab and driver's desk lighting as well as the lighting for the destination displays on the ends and sides can be controlled digitally. LED interior lighting fitted as standard. A buffer capacitor is installed in each car to bridge brief sections without power. The interior lighting is supplied through the continuous electrical connection running the length of the train. Maintenance-free warm white and red LEDs are used for all of the lighting. Multi-coloured interior details. The pantographs can be raised and lowered digitally. Many separately applied details. The minimum radius for operation is 360 mm. Length of the train approximately 112.6 cm. Highlights Completely new tooling in a highly detailed version LED interior lighting with buffer capacitors fitted as standard Multi-coloured interior details Pantographs can be raised and lowered digitally Lighting for the destination displays can be controlled digitally Long-distance headlight in two intensity levels can be controlled digitally Cab and driver's desk lighting can be controlled digitally Many separately applied details Digital decoder with extensive light and sound functions DCC, mfx and RailCom capable

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 594.15 RRP CHF 699.00

In stock: 1 on the shelf, shipped within 1-3 days

Steam locomotive E 991
Trix 25491
Steam locomotive E 991

Prototype: Steam locomotive with tender E 991 of the Danish State Railways (DSB). The locomotive looks as it did around 2007. Highlights Completely new tooling. Particularly delicate metal construction. Smoke generator installed as standard. Emergency light can be controlled separately digitally. Cab lighting can be controlled separately digitally. Firebox flickering can be controlled digitally. Product description Model: With digital decoder and extensive light and sound functions. Regulated high-performance drive with flywheel in the boiler. Three axles powered. Traction tyres. Locomotive and tender mostly made of metal. A smoke generator is installed as standard. The triple headlights that change over with the direction of travel on the locomotive and tender and the built-in smoke unit will work in conventional operation and can be controlled digitally. The emergency light on the smoke box door can be controlled separately digitally. In addition, the cab lighting and the firebox flickering can be controlled separately digitally. Lighting with maintenance-free warm white and red LEDs. Adjustable coupling with a guide mechanism between the locomotive and tender. Close coupling with a guide mechanism on the tender, with NEM pocket. The minimum radius for operation is 360 mm. Various plug-in parts such as access steps, brake hoses, piping and imitation screw couplings are included. Length over the buffers approx. 24.5 cm. 175 years of railways in Denmark. You will find this model in an AC version in the Märklin H0 range under item number 39491.

Regular price: CHF 639.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price New
Type GE ES44AC Diesel Locomotive
Trix 25549 Scale H0
Type GE ES44AC Diesel Locomotive

Prototype Heavy diesel electric freight locomotive, type General Electric ES44AC of the Norfolk Southern (NS). Deep black basic paint scheme. Running number 8136. Current operating condition. Model With a digital decoder and extensive sound and light functions. Regulated high-performance drive with a flywheel centrally mounted. Two axles in each bogie powered using cardan shafts. Traction tyres. Headlights that can be switched independently of the direction of travel, consisting of four lamps each at the front and rear of the locomotive. Headlights will work in conventional operation and can be switched off separately in pairs digitally. Cab lighting, running number plates, long-distance headlight and flashing function of the headlights can be controlled digitally. Lighting with maintenance-free warm white LEDs. With a buffer capacitor. Smoke generator fitted as standard with dynamic smoke output, can be controlled digitally. Many separately applied details. For operation with claw couplings, the NEM pocket can be fixed in place using the clamping pieces included. A rail guard with a smaller cut-out for the front, brake hoses and two clamping pieces for the NEM pocket are included. Length over the couplings approx. 27 cm. Highlights Chassis and body of the locomotive made of metal Version with additional lamps on the rear running plate Smoke generator fitted as standard with dynamic smoke output Many switchable light and sound functions Cab lighting can be controlled digitally Illuminated running number plates can be controlled digitally Long-distance headlight can be switched on Centrally mounted motor, four axles powered using cardan shafts Operation with claw couplings and standard close couplings possible DCC, mfx and RailCom-capable With a buffer capacitor for bridging short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 424.15 RRP CHF 499.00

In stock: 1 on the shelf, shipped within 1-3 days

Class Ae 8/14 Electric Locomotive, Road Number 11852
Trix 25590 Scale H0
Class Ae 8/14 Electric Locomotive, Road Number 11852

Prototype Heavy double electric locomotive Ae 8/14 "Landilok" of the Swiss Federal Railways (SBB). Basic dark green paint scheme. Version with 2 pantographs. Sleeve buffers with square buffer plates. Locomotive running number 11852. The locomotive looks as it did in the early 1970s. Model The locomotive has a digital decoder and extensive light and sound functions. There is a regulated high-performance motor with a flywheel in each locomotive half. 4 axles powered in each locomotive half. The triple headlights change over with the direction of travel and 1 white tail lamp will work in conventional operation and can be controlled digitally. They can be switched over to 1 red tail lamp when the locomotive is running alone. Double "A" light function. Maintenance-free warm white and red LEDs are used for the lighting. The wrong-line signal, cab lighting and engine room lighting can be controlled digitally. Close couplers guided in a slot at the ends of the locomotive, separable close coupler between the locomotive halves. Detailed roof equipment with roof lines, insulators and roof walks as well as scissors-type pantographs. Both pantographs can be raised and lowered digitally. The minimum radius for operation is 360 mm. The cut-outs in the front aprons next to the standard pocket can be closed with the filler pieces included. Brake hoses and imitation screw couplings are included. Length over the buffers 39.1 cm. Highlights Completely new tooling Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally Red permission-to-proceed signal can also be controlled digitally Buffer height to NEM standards

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 759.00 RRP CHF 789.00

In stock: 1 on the shelf, shipped within 1-3 days

Class Be 6/8 II "Crocodile" Electric Locomotive
Trix 25596 Scale H0
Class Be 6/8 II "Crocodile" Electric Locomotive

Prototype Electric locomotive, series Be 6/8 II "Krokodil" of the Swiss Federal Railways (SBB). Type from the first production series. Basic fir green paint scheme. With 2 cab doors, wide shunting steps on the engine hoods and bow-shaped grab rails, sleeve buffers, without transition plates, with a wrong-line signal and Signum-Integra magnets. Locomotive running number 13254. The locomotive looks as it did between 1960 and 1965. Model The locomotive has a digital decoder and extensive sound functions. It also has 2 regulated high-performance drives with flywheels, 1 motor in each drive bogie. 3 axles and a jackshaft powered in each. Traction tyres. Articulated running gear able to negotiate tight curves. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details. 3-part locomotive body with engine hoods that swing out. Detailed roof equipment with a safety grille below the pantographs. Length over the buffers 22.3 cm. Highlights Highly detailed metal version Prototypically adapted details with only 2 cab doors and wide shunting steps Locomotive with 2 high-performance drives and flywheels With a RailCom-capable DCC/mfx digital decoder and a variety of operating and sound functions

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 519.90 RRP CHF 559.00

In stock: 1 on the shelf, shipped within 1-3 days