Exclusive dealer for Switzerland
I-Track, the structure of your layout, ready to assemble
Baseboards, track formations, track beds, helices and CarMotion roads: the plywood system by Hacker Model, assembled without any carpentry. All items are available to order.
- 843items available to order
- 4scales: H0, TT, N and Märklin C
- 6 and 16 cmthe two baseboard heights

What makes I-Track
- A precision system: Hacker Model Production, in Řevničov in the Czech Republic, designs I-Track as the basic structure of your layout: baseboards, frames and track formations cut to fit together.
- On several levels: baseboards 6 and 16 cm high, baseboards with a 26 cm hidden station, Rondela helices and ramps to go from one level to the next.
- For your track: track beds and segments for H0, TT, N and Märklin C track, Rondela helices for Märklin, Roco, Piko, Peco, Tillig, Fleischmann and Minitrix.
- CarMotion roads: road beds and asphalt plates for the Viessmann CarMotion system in H0, up to the complete module with its roads.
- Portable modules: modules on aluminium legs, quick to set up, easy to transport and store, and understructures in planed wood, 66 or 76 cm high.
- To order, with advice: online ordering coming soon. Until then, we advise you, order and deliver, or you collect your order in Rolle.
Catalogue to download
The whole system, layout plans and dimensions, in the manufacturer's documents.
- I-Track catalogue 2024: 40 pages, in German, English and Czech (PDF, 15.5 Mo)
- New for autumn 2026: 4 pages on CarMotion, in German and English (PDF, 3.5 Mo)
The I-Track families
Baseboards and structure
74 itemsBaseboards 6 cmThe base of the layout, rectangular or triangular, loose or already glued.See the items
55 itemsBaseboards 16 cmTaller, to house points, motors and wiring under the track.See the items
14 itemsBaseboards for turntablesCut for Roco, Fleischmann, Trix and Märklin turntables.See the items
24 itemsBaseboards with hidden stationA hidden station under the scenic level, 26 cm high.See the items
17 itemsSide wallsTransparent or solid walls to close baseboards and hidden station.See the items
65 itemsWooden understructuresPlaned wood, 66 or 76 cm high, to stand the baseboards on.See the items
22 itemsModules and control panelsModules on legs, starter boards for table layouts, control panels.See the itemsThe track formation
74 itemsH0 track formation segmentsStraights, curves, bridges and ramps to raise the H0 track.See the items
40 itemsSegments for Märklin CThe same formation, to the geometry of Märklin C track.See the items
52 itemsTT track formation segmentsStraights, curves and bridges to TT track radii.See the items
46 itemsN track formation segmentsStraights, curves and bridges to N track radii.See the items
56 itemsTrack bedsUnder the track, for H0, TT, N and Märklin C, straight and curved.See the items
76 itemsRamps and embankmentsRamps, embankments and track underlays for gentle gradients.See the items
82 itemsRondela helicesHelices to change level in a small space, from N to H0.See the items
90 itemsTemplates, spacers and postsLaying templates, spacers for parallel tracks and posts.See the itemsCarMotion roads
76 itemsCarMotion road bedsThe road elements that guide the CarMotion vehicles.See the items
34 itemsAsphalt road platesThe finished road surface, with or without a zebra crossing.See the items
44 itemsCarMotion segments and modulesMounting posts, segments, holders for the charger, complete modules.See the itemsAll I-Track items
Thanks to their special design, the 6 cm base plates are very stable while remaining lightweight; the frames have cut-outs for easy cable installation and the lower frame has large openings for trouble-free access. Thanks to their various dimensions, the base plates for Rondela can be assembled to the desired overall size and form the ideal base for our Rondela helix, best mounted directly on original Hacker understructures. The base plates are supplied as a kit with illustrated assembly instructions, are easy to assemble thanks to computer-aided production, and are glued with standard wood glue.
On order
The I-Track base plates – already glued – form the stable and durable foundation for your model railway and can be combined to suit your available space thanks to their various dimensions. The glued base plates are very light and stable; their construction guarantees strength, rigidity and dimensional stability. The lower part has large openings, so that everything is perfectly accessible.
On order
Thanks to their special design, the 6 cm base plates are very stable while remaining lightweight; the frames have cut-outs for easy cable installation and the lower frame has large openings for trouble-free access. Thanks to their various dimensions, the base plates for Rondela can be assembled to the desired overall size and form the ideal base for our Rondela helix, best mounted directly on original Hacker understructures. The base plates are supplied as a kit with illustrated assembly instructions, are easy to assemble thanks to computer-aided production, and are glued with standard wood glue.
On order
The I-Track base plates – already glued – form the stable and durable foundation for your model railway and can be combined to suit your available space thanks to their various dimensions. The glued base plates are very light and stable; their construction guarantees strength, rigidity and dimensional stability. The lower part has large openings, so that everything is perfectly accessible.
On order
Thanks to its special construction, the 6 cm base plate is very stable while remaining lightweight. The ribs feature cutouts for easy cable installation, and the lower frame has large openings for easy access to the layout. It is supplied as a kit with illustrated assembly instructions and is glued with standard wood glue.
On order
The pre-glued I-Track base plates form a stable and durable foundation for the model railway. Thanks to the various available dimensions, every layout can be adapted to the available space. These already glued plates are light and stable, with large openings in the lower part for perfect access.
On order
The base module is a universal foundation for model railway scenery; it can be used on its own or connected sideways to other modules to gradually extend the layout. It is prepared for the installation of height-adjustable legs and fitted with a transparent protective railing that protects the layout edges and the CarMotion system. For transport and storage, two finished modules can simply be folded against each other and fitted with covers.
On order
The base module is a universal foundation for model railway scenery; it can be used on its own or connected sideways to other modules to gradually extend the layout. It is prepared for the installation of height-adjustable legs and fitted with a transparent protective railing that protects the layout edges and the CarMotion system. For transport and storage, two finished modules can simply be folded against each other and fitted with covers.
On order
The I-Track CarMotion complete solution consists of the module 110×80×10 cm (HCT9812K-03), a set of road bedding elements and crossings (HCT9812K-03SB), a set of asphalt road plates (HCT9812K-03AT) and transparent protective railings (HCT9814R). It also includes a Viessmann magnetic tape 3×1 mm, 10 metres (V8430), the adhesives ModelFix PRO (HC6440) and Herkules (HC6445), 7 mounting rings for turnouts (HCT8408W) and one mounting ring for the inductive charger (HCT8408L).
On order
The base module is a universal platform for designing model railway scenes; it can be used on its own or connected sideways to further modules (M8 screw set, HCT8460S4) and is prepared for height-adjustable legs (82–92 cm, HCT9890AL8, or 110–120 cm, HCT9890AL11). A transparent protective railing secures the layout edges, including the CarMotion system. After operation, two modules can be folded together, fixed with the connecting plates HCT9812T/W and stored dust-protected in the supplied carton.
On order
Fully assembled starter plate for the I-Track table layout, allowing track to be laid or roads for CarMotion to be built immediately. After operation, the locomotive and wagons are removed and the plate with its tracks stored in the supplied carton, or it can be left on the table using the supplied spacers and the lid, creating 8 cm of clearance above the layout. Several starter plates can be joined together with M8 screws and wing nuts (HCT8460S4) to form a larger modular layout.
On order
Fully assembled starter plate for the I-Track table layout, allowing track to be laid or roads for CarMotion to be built immediately. After operation, the locomotive and wagons are removed and the plate with its tracks stored in the supplied carton, or it can be left on the table using the supplied spacers and the lid, creating 8 cm of clearance above the layout. Several starter plates can be joined together with M8 screws and wing nuts (HCT8460S4) to form a larger modular layout.
On order
Fully assembled starter plate for the I-Track table layout, allowing track to be laid or roads for CarMotion to be built immediately. After operation, the locomotive and wagons are removed and the plate with its tracks stored in the supplied carton, or it can be left on the table using the supplied spacers and the lid, creating 8 cm of clearance above the layout. Several starter plates can be joined together with M8 screws and wing nuts (HCT8460S4) to form a larger modular layout.
On order
After operation, two modules – starter plates with scenery – can simply be folded against each other, connected using the transport plates HCT9812T, fitted with protective covers and then safely stored or transported, protecting the layout from dust and mechanical damage. Included are 2 transport plates measuring 50 x 60 x 0.5 cm plus a set of mounting screws with washers and nuts.
On order
After operation, two modules – starter boards with landscape – can simply be folded against each other, connected using the transport plates, fitted with protective covers and safely stored or transported. This protects the layout from dust and mechanical damage. Contains 2 transport plates 50 × 80 × 0.5 cm as well as a set of mounting screws with washers and nuts.
On order
Contains 10 railings, length 30 cm, for I-Track modules and road construction segments.
On order
Thanks to its special construction, the 6 cm base plate is very stable while remaining lightweight; the frames feature cut-outs for easy cable installation, and the lower frame has large openings for easy access to every part of the layout. Thanks to their various dimensions, the base plates can be combined to the desired overall size and form the ideal base for the Rondela helix; they are best mounted directly onto the original Hacker understructures. They are supplied as a kit with illustrated assembly instructions and are glued using standard wood glue.
On order
Base plate type 6 with dimensions 80x50x6 cm.
On order
Base plate type 6 with dimensions 60x60x6 cm.
On order
Thanks to their special construction, the 6 cm base plates are very stable while remaining lightweight; the ribs have cutouts for easy cable installation and the lower frame has large openings for access to every point of the layout. With the various available sizes and the original Hacker understructures, they form the ideal base, including for the Rondela helix. The base plate is supplied as a kit with illustrated instructions and is glued with standard wood glue.
On order
The already glued I-Track base plates form the stable and durable foundation for the model railway. Thanks to the various available sizes, every layout can be adapted to your personal space. The construction is very light and guarantees strength, rigidity and dimensional stability; the lower part has large openings for perfect access.
On order
Thanks to their special construction, the 6 cm base plates are very stable while remaining lightweight; the ribs have cutouts for easy cable installation and the lower frame has large openings for access to every point of the layout. With the various available sizes and the original Hacker understructures, they form the ideal base, including for the Rondela helix. The base plate is supplied as a kit with illustrated instructions and is glued with standard wood glue.
On order
The already glued I-Track base plates form the stable and durable foundation for the model railway. Thanks to the various available sizes, every layout can be adapted to your personal space. The construction is very light and guarantees strength, rigidity and dimensional stability; the lower part has large openings for perfect access.
On order
Thanks to their special construction, the 6 cm base plates are very stable while remaining lightweight; the ribs have cutouts for easy cable installation and the lower frame has large openings for access to every point of the layout. With the various available sizes and the original Hacker understructures, they form the ideal base, including for the Rondela helix. The base plate is supplied as a kit with illustrated instructions and is glued with standard wood glue.
On order