Exclusive dealer for Switzerland
I-Track, the structure of your layout, ready to assemble
Baseboards, track formations, track beds, helices and CarMotion roads: the plywood system by Hacker Model, assembled without any carpentry. All items are available to order.
- 843items available to order
- 4scales: H0, TT, N and Märklin C
- 6 and 16 cmthe two baseboard heights

What makes I-Track
- A precision system: Hacker Model Production, in Řevničov in the Czech Republic, designs I-Track as the basic structure of your layout: baseboards, frames and track formations cut to fit together.
- On several levels: baseboards 6 and 16 cm high, baseboards with a 26 cm hidden station, Rondela helices and ramps to go from one level to the next.
- For your track: track beds and segments for H0, TT, N and Märklin C track, Rondela helices for Märklin, Roco, Piko, Peco, Tillig, Fleischmann and Minitrix.
- CarMotion roads: road beds and asphalt plates for the Viessmann CarMotion system in H0, up to the complete module with its roads.
- Portable modules: modules on aluminium legs, quick to set up, easy to transport and store, and understructures in planed wood, 66 or 76 cm high.
- To order, with advice: online ordering coming soon. Until then, we advise you, order and deliver, or you collect your order in Rolle.
Catalogue to download
The whole system, layout plans and dimensions, in the manufacturer's documents.
- I-Track catalogue 2024: 40 pages, in German, English and Czech (PDF, 15.5 Mo)
- New for autumn 2026: 4 pages on CarMotion, in German and English (PDF, 3.5 Mo)
The I-Track families
Baseboards and structure
74 itemsBaseboards 6 cmThe base of the layout, rectangular or triangular, loose or already glued.See the items
55 itemsBaseboards 16 cmTaller, to house points, motors and wiring under the track.See the items
14 itemsBaseboards for turntablesCut for Roco, Fleischmann, Trix and Märklin turntables.See the items
24 itemsBaseboards with hidden stationA hidden station under the scenic level, 26 cm high.See the items
17 itemsSide wallsTransparent or solid walls to close baseboards and hidden station.See the items
65 itemsWooden understructuresPlaned wood, 66 or 76 cm high, to stand the baseboards on.See the items
22 itemsModules and control panelsModules on legs, starter boards for table layouts, control panels.See the itemsThe track formation
74 itemsH0 track formation segmentsStraights, curves, bridges and ramps to raise the H0 track.See the items
40 itemsSegments for Märklin CThe same formation, to the geometry of Märklin C track.See the items
52 itemsTT track formation segmentsStraights, curves and bridges to TT track radii.See the items
46 itemsN track formation segmentsStraights, curves and bridges to N track radii.See the items
56 itemsTrack bedsUnder the track, for H0, TT, N and Märklin C, straight and curved.See the items
76 itemsRamps and embankmentsRamps, embankments and track underlays for gentle gradients.See the items
82 itemsRondela helicesHelices to change level in a small space, from N to H0.See the items
90 itemsTemplates, spacers and postsLaying templates, spacers for parallel tracks and posts.See the itemsCarMotion roads
76 itemsCarMotion road bedsThe road elements that guide the CarMotion vehicles.See the items
34 itemsAsphalt road platesThe finished road surface, with or without a zebra crossing.See the items
44 itemsCarMotion segments and modulesMounting posts, segments, holders for the charger, complete modules.See the itemsAll I-Track items
Includes 2 transport plates 40 x 50 x 0.5 cm as well as a set of mounting screws with washers and nuts. After operation, two modules with landscape can simply be folded against each other, connected using the transport plates, fitted with protective covers and safely stored or transported. This protects the layout from dust and mechanical damage.
On order
The ramps are made of a high-quality, very sturdy yet flexible material; the individual elements therefore need no further reinforcement and can be installed without tools. They ensure smooth, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot melt adhesive or Hacker CA glue. The FLEXI versions can also be easily adapted to the individual course of the track plan; the ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, very sturdy yet flexible material; the individual elements therefore need no further reinforcement and can be installed without tools. They ensure smooth, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot melt adhesive or Hacker CA glue. The FLEXI versions can also be easily adapted to the individual course of the track plan; the ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, very sturdy yet flexible material; the individual elements therefore need no further reinforcement and can be installed without tools. They ensure smooth, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot melt adhesive or Hacker CA glue. The FLEXI versions can also be easily adapted to the individual course of the track plan; the ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, very sturdy yet flexible material; the individual elements therefore need no further reinforcement and can be installed without tools. They ensure smooth, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot melt adhesive or Hacker CA glue. The FLEXI versions can also be easily adapted to the individual course of the track plan; the ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. They can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. The FLEXI version can be easily adapted to the course of the track plan and cut with a sharp knife or a hot wire, then glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. They can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0%, 3.7% and 4.4%.
On order
The ramps are made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. The FLEXI version can be easily adapted to the course of the track plan and cut with a sharp knife or a hot wire, then glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0%, 3.7% and 4.4%.
On order
The ramps are made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. They can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality material that is stable yet flexible and require no additional reinforcement. They ensure quiet, vibration-free train operation, can be cut with a knife or hot wire, and glued with hot glue or Hacker CA adhesive. As a FLEXI version they easily adapt to the course of your track plan and are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The embankment is made of a high-quality material that is stable yet flexible and requires no additional reinforcement. It ensures quiet, vibration-free train operation, can be cut with a knife or hot wire, and glued with hot glue or Hacker CA adhesive. The segments are available in various widths and heights, allowing the entire track route to be built quickly without expensive tools.
On order
The embankment is made of a high-quality material that is stable yet flexible and requires no additional reinforcement. It ensures quiet, vibration-free train operation, can be cut with a knife or hot wire, and glued with hot glue or Hacker CA adhesive. The segments are available in various widths and heights, allowing the entire track route to be built quickly without expensive tools.
On order
The embankment is made of a high-quality material that is stable yet flexible and requires no additional reinforcement. It ensures quiet, vibration-free train operation, can be cut with a knife or hot wire, and glued with hot glue or Hacker CA adhesive. The segments are available in various widths and heights, allowing the entire track route to be built quickly without expensive tools.
On order
The embankment is made of a high-quality material that is stable yet flexible and requires no additional reinforcement. It ensures quiet, vibration-free train operation, can be cut with a knife or hot wire, and glued with hot glue or Hacker CA adhesive. The segments are available in various widths and heights, allowing the entire track route to be built quickly without expensive tools.
On order
The embankment is made of a high-quality, very sturdy yet flexible material. The individual elements therefore do not need to be reinforced and can be installed without tools, ensuring quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very sturdy yet flexible material. The FLEXI version can be easily and individually adapted to the course of your track plan, ensuring quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very sturdy yet flexible material. The individual elements therefore do not need to be reinforced and can be installed without tools, ensuring quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very sturdy yet flexible material. The FLEXI version can be easily and individually adapted to the course of your track plan, ensuring quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very sturdy yet flexible material. The individual elements therefore do not need to be reinforced and can be installed without tools, ensuring quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very stable yet flexible material that ensures smooth, vibration-free train operation without disturbing noise. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue, allowing the track plan to be adapted quickly and individually.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order