Exclusive dealer for Switzerland
I-Track, the structure of your layout, ready to assemble
Baseboards, track formations, track beds, helices and CarMotion roads: the plywood system by Hacker Model, assembled without any carpentry. All items are available to order.
- 843items available to order
- 4scales: H0, TT, N and Märklin C
- 6 and 16 cmthe two baseboard heights

What makes I-Track
- A precision system: Hacker Model Production, in Řevničov in the Czech Republic, designs I-Track as the basic structure of your layout: baseboards, frames and track formations cut to fit together.
- On several levels: baseboards 6 and 16 cm high, baseboards with a 26 cm hidden station, Rondela helices and ramps to go from one level to the next.
- For your track: track beds and segments for H0, TT, N and Märklin C track, Rondela helices for Märklin, Roco, Piko, Peco, Tillig, Fleischmann and Minitrix.
- CarMotion roads: road beds and asphalt plates for the Viessmann CarMotion system in H0, up to the complete module with its roads.
- Portable modules: modules on aluminium legs, quick to set up, easy to transport and store, and understructures in planed wood, 66 or 76 cm high.
- To order, with advice: online ordering coming soon. Until then, we advise you, order and deliver, or you collect your order in Rolle.
Catalogue to download
The whole system, layout plans and dimensions, in the manufacturer's documents.
- I-Track catalogue 2024: 40 pages, in German, English and Czech (PDF, 15.5 Mo)
- New for autumn 2026: 4 pages on CarMotion, in German and English (PDF, 3.5 Mo)
The I-Track families
Baseboards and structure
74 itemsBaseboards 6 cmThe base of the layout, rectangular or triangular, loose or already glued.See the items
55 itemsBaseboards 16 cmTaller, to house points, motors and wiring under the track.See the items
14 itemsBaseboards for turntablesCut for Roco, Fleischmann, Trix and Märklin turntables.See the items
24 itemsBaseboards with hidden stationA hidden station under the scenic level, 26 cm high.See the items
17 itemsSide wallsTransparent or solid walls to close baseboards and hidden station.See the items
65 itemsWooden understructuresPlaned wood, 66 or 76 cm high, to stand the baseboards on.See the items
22 itemsModules and control panelsModules on legs, starter boards for table layouts, control panels.See the itemsThe track formation
74 itemsH0 track formation segmentsStraights, curves, bridges and ramps to raise the H0 track.See the items
40 itemsSegments for Märklin CThe same formation, to the geometry of Märklin C track.See the items
52 itemsTT track formation segmentsStraights, curves and bridges to TT track radii.See the items
46 itemsN track formation segmentsStraights, curves and bridges to N track radii.See the items
56 itemsTrack bedsUnder the track, for H0, TT, N and Märklin C, straight and curved.See the items
76 itemsRamps and embankmentsRamps, embankments and track underlays for gentle gradients.See the items
82 itemsRondela helicesHelices to change level in a small space, from N to H0.See the items
90 itemsTemplates, spacers and postsLaying templates, spacers for parallel tracks and posts.See the itemsCarMotion roads
76 itemsCarMotion road bedsThe road elements that guide the CarMotion vehicles.See the items
34 itemsAsphalt road platesThe finished road surface, with or without a zebra crossing.See the items
44 itemsCarMotion segments and modulesMounting posts, segments, holders for the charger, complete modules.See the itemsAll I-Track items
I-Track curved track segment for H0 Märklin C track, radius 360/437.5 mm, angle 30°, 2 tracks, width 157.5 mm, 6 pieces. Made of laser-cut plywood, supplied as a kit with illustrated instructions, simply glued with cyanoacrylate or wood glue.
On order
H0 curved track bed elements, double track, for Märklin C track R360/437.5 mm, 30°, width 147.5 mm, 6 pcs. They are made of a high quality, sturdy and flexible material and fit precisely onto I-Track segments.
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 360/437.5 mm, 2-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 141.5 mm, inner gradient: 4.89%, outer gradient: 4.18%, outer diameter: 955 mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 Rondela add-on circle Märklin C R1/R2, track radius 360/437.5 mm, 1- or 2-track, 6 segments = 1 circle, build height: 110 mm, segment width: 157.5 mm, inner gradient: 4.89%, outer gradient: 4.18%, outer diameter: 956 mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. Rondela Märklin C R1/R2, H0 track radius 360/437.5 mm, 1- or 2-track, base circle, 9 segments = 1 1/2 circles, build height: 200 mm, segment width: 157.5 mm, inner gradient: 4.89%, outer gradient: 4.18%, outer diameter: 956 mm
On order
For laying multi-track sections, the H spacers ensure the mutual distance and concentricity of the tracks. They are slid onto the rails, placed closer together on curves and further apart on straight sections, before the tracks are screwed down or glued to the base with Hacker adhesive (CA). They are then removed again and reused for laying further tracks. The set contains 12 pieces for Märklin C+K track, 77.5 mm spacing.
On order
I-Track R spacers for the Rondela helix, 12 pieces. For laying multi-track sections, the R spacers ensure the mutual distance and concentricity of the tracks. They are slid onto the rails, placed closer together on curves and further apart on straight sections, before the tracks are screwed down or glued to the base with Hacker adhesive (CA). They are then removed again and reused for laying further tracks.
On order
RONDELA is the track helix system for Märklin C gauge in H0 that lets you bridge any height difference in the smallest space, for example for entries and exits to hidden/shadow stations. The helix is made of I-Track segments and, thanks to its special construction, is extremely stable, rigid and load-bearing; the upper connecting segment provides a smooth gradient transition without a disruptive kink. Rondela is available in various radii and in 1- or 2-track versions, buildable clockwise or counter-clockwise.
On order
RONDELA is the track helix system for Märklin C gauge in H0 that lets you bridge any height difference in the smallest space, for example for entries and exits to hidden/shadow stations. The helix is made of I-Track segments and, thanks to its special construction, is extremely stable, rigid and load-bearing; the upper connecting segment provides a smooth gradient transition without a disruptive kink. Rondela is available in various radii and in 1- or 2-track versions, buildable clockwise or counter-clockwise.
On order
RONDELA is the track helix system for Märklin C gauge in H0 that lets you bridge any height difference in the smallest space, for example for entries and exits to hidden/shadow stations. The helix is made of I-Track segments and, thanks to its special construction, is extremely stable, rigid and load-bearing; the upper connecting segment provides a smooth gradient transition without a disruptive kink. Rondela is available in various radii and in 1- or 2-track versions, buildable clockwise or counter-clockwise.
On order
I-Track segments for Märklin C track are trackbed construction elements that let you bridge any terrain shape and change levels on your layout; the included modular supports let you freely adjust the gradient or slope, for example for entries and exits to a hidden/shadow station. Thanks to their special construction with two sub-girders, the segments are very rigid, bending-resistant and load-bearing, laser-cut from high-quality plywood and supplied as a kit with an illustrated assembly guide. The set comprises 6 pieces in 80x171.7 mm format.
On order
I-Track segments for Märklin C track are trackbed construction elements that let you bridge any terrain shape and change levels on your layout; the included modular supports let you freely adjust the gradient or slope, for example for entries and exits to a hidden/shadow station. Thanks to their special construction with two sub-girders, the segments are very rigid, bending-resistant and load-bearing, laser-cut from high-quality plywood and supplied as a kit with an illustrated assembly guide. The set comprises 6 pieces in 157.5x171.7 mm format.
On order
I-Track segments are the perfect trackbed elements for bridging any terrain shape and easily changing levels on your layout. The included modular supports allow you to freely adjust the gradient or incline. The segments are supplied as a kit, laser-cut from plywood, with an illustrated assembly guide.
On order
I-Track segments are the perfect trackbed elements for bridging any terrain shape and easily changing levels on your layout. The included modular supports allow you to freely adjust the gradient or incline. The segments are supplied as a kit, laser-cut from plywood, with an illustrated assembly guide.
On order
I-Track segments are the perfect trackbed elements for bridging any terrain shape and easily changing levels on your layout. The included modular supports allow you to freely adjust the gradient or incline. The segments are supplied as a kit, laser-cut from plywood, with an illustrated assembly guide.
On order
I-Track segments are the perfect trackbed elements for bridging any terrain shape and easily changing levels on your layout. The included modular supports allow you to freely adjust the gradient or incline. The segments are supplied as a kit, laser-cut from plywood, with an illustrated assembly guide.
On order
I-Track segments are the perfect trackbed elements for bridging any terrain shape and easily changing levels on your layout. The included modular supports allow you to freely adjust the gradient or incline. The segments are supplied as a kit, laser-cut from plywood, with an illustrated assembly guide.
On order
I-Track segments for Märklin C track are the perfect trackbed construction elements, letting you bridge any terrain shape and easily change levels on your layout. Thanks to the included modular supports, the gradient can be adjusted individually, e.g. for entrances and exits to a hidden/shadow station. This 1-track transition segment is laser-cut from high-quality plywood and supplied as a kit with an illustrated assembly guide.
On order
I-Track segments for Märklin C track are the perfect trackbed construction elements, letting you bridge any terrain shape and easily change levels on your layout. Thanks to the included modular supports, the gradient can be adjusted individually, e.g. for entrances and exits to a hidden/shadow station. These connection segments are laser-cut from high-quality plywood and supplied as a kit with an illustrated assembly guide.
On order
I-Track segments for Märklin C track are the perfect trackbed construction elements, letting you bridge any terrain shape and easily change levels on your layout. Thanks to the included modular supports, the gradient can be adjusted individually, e.g. for entrances and exits to a hidden/shadow station. These connection segments are laser-cut from high-quality plywood and supplied as a kit with an illustrated assembly guide.
On order
I-Track segments for Märklin C track are the perfect trackbed construction elements, letting you bridge any terrain shape and easily change levels on your layout. Thanks to the included modular supports, the gradient can be adjusted individually, e.g. for entrances and exits to a hidden/shadow station. This 1-track curved segment, Märklin C R2 437.5 mm 15°, 80 mm wide, is laser-cut from high-quality plywood and supplied as a set of 6 with assembly instructions.
On order
Trackbed elements with a thickness of 5 mm (H0, TT) are available straight and curved with various radii, matching the I-Track segments. They fit precisely onto the segments, the Rondela helix, or directly onto any layout baseboard, and are made of a sturdy, flexible material that ensures smooth, vibration-free train operation. The elements can be cut with a sharp knife and glued with hot-melt adhesive or Hacker CA glue.
On order
I-Track segments are laser-cut plywood trackbed construction elements that let you bridge any terrain shape and change levels. Thanks to their two longitudinal beams they are rigid, bend-resistant and load-bearing, while the included modular supports let you adjust the gradient as needed.
On order
The trackbed elements have a thickness of 5 mm (H0) and fit precisely onto the I-Track segments, the Rondela helix or any model railway baseboard. The stable, flexible material ensures smooth, vibration-free train operation and can be trimmed with a sharp knife if needed.
On order