Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Trix H0 and Minitrix

Trix, SBB and European trains in H0 and N

Crocodile, Landilok, Swiss Express Re 4/4 II and Giruno of the SBB, BLS Ae 6/8, plus trains from Germany and across Europe: Trix models the railway in 1:87 on two-rail DC, and in 1:160 with Minitrix.

Choose a family See all items

  • 692items in the shop
  • 1:87 and 1:160Trix H0 and Minitrix
  • Since 1964Minitrix and NEM two-rail
SBB Be 6/8 II Crocodile locomotive, Trix H0 model in 1:87, on a scenic layout

What Trix brings to your layout

  • The great Swiss locomotives: Be 6/8 II Crocodile, Ae 8/14 Landilok, Swiss Express Re 4/4 II, Giruno and RAe 4/8 Churchill of the SBB, Ae 6/8 and Re 420 of the BLS.
  • Two-rail, direct current: since 1964 Trix has run on two-rail DC to NEM standards. The models run on analogue or DCC layouts and register via mfx in the märklin digital system.
  • Minitrix, N scale: launched in 1964, Minitrix covers 1:160: locomotives, coaches, wagons and a complete track system, also with concrete sleepers.
  • A Nuremberg house: grown out of the firm J. Hafner, founded in 1838, Trix has been part of the Märklin group since 1997.

Our favourites for a Swiss layout

Class Be 6/8 II "Crocodile" Electric Locomotive
Trix 25596 Scale H0
Class Be 6/8 II "Crocodile" Electric Locomotive

Prototype Electric locomotive, series Be 6/8 II "Krokodil" of the Swiss Federal Railways (SBB). Type from the first production series. Basic fir green paint scheme. With 2 cab doors, wide shunting steps on the engine hoods and bow-shaped grab rails, sleeve buffers, without transition plates, with a wrong-line signal and Signum-Integra magnets. Locomotive running number 13254. The locomotive looks as it did between 1960 and 1965. Model The locomotive has a digital decoder and extensive sound functions. It also has 2 regulated high-performance drives with flywheels, 1 motor in each drive bogie. 3 axles and a jackshaft powered in each. Traction tyres. Articulated running gear able to negotiate tight curves. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details. 3-part locomotive body with engine hoods that swing out. Detailed roof equipment with a safety grille below the pantographs. Length over the buffers 22.3 cm. Highlights Highly detailed metal version Prototypically adapted details with only 2 cab doors and wide shunting steps Locomotive with 2 high-performance drives and flywheels With a RailCom-capable DCC/mfx digital decoder and a variety of operating and sound functions

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 519.90 RRP CHF 559.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Class RABe 501 Giruno High-Speed Rail Car Train
Trix 25810 Scale H0
Class RABe 501 Giruno High-Speed Rail Car Train

Prototype EC 250 electric high-speed multiple unit as the RABe 501 "Giruno" of the Swiss Federal Railways (SBB). 1 end car A (Bt1), 2nd class. 1 intermediate car F (B7), 2nd class, with entrances for the handicapped and a pantograph. 1 intermediate car G (WR6), with a restaurant area. 1 intermediate car H (A5), 1st class, with entrances for the handicapped and a pantograph. 1 end car L (At2), 1st class. In use as a multi-system multiple unit between Zurich Airport and Basel as well as across the Alps through the Gotthard Base Tunnel as far as Milan. Approval also planned for Germany and Austria. Train number RABe 501 003, with the "San Gottardo" coat of arms. Current operating condition 2022. Model 5-part base set. The restaurant car G and the two intermediate cars F and H arranged to the left and right of it are permanently coupled to one another by means of the Jacobs bogies. The unit has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a flywheel, centrally mounted in the restaurant car. All 4 axles in both Jacobs bogies to the left and right of the restaurant car powered using cardan shafts. Traction tyres. The cabs in the end cars have interior details. Power supply by way of the leading end car, depending on the direction of travel. Guide mechanism in the Jacobs bogies. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. They can be changed over to a single white tail lamp (Swiss lighting changeover). Additional separately controllable light functions. Interior lighting fitted as standard. The interior lighting is supplied by way of the continuous electrical connection running through the whole train. In addition, the cab lighting and the driver's desk lighting can each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for all of the lighting. The pantographs on the intermediate cars F and H can each be raised and lowered separately as a digital function. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the base set approximately 112 cm. Highlights Completely new tooling True-to-scale reproduction 1:87. LED interior lighting fitted as standard Cab lighting and driver's desk lighting can be controlled digitally Pantographs on the intermediate cars F and H can be raised and lowered by means of a digital function Digital decoder with extensive light and sound functions Train number RABe 501 003, with the "San Gottardo" coat of arms Note The 5-part base set 25810 can be expanded with the 2-part add-on car sets 23281, 23282, and 23283 to make a prototypical 11-part multiple unit.

  • 2-rail, direct current
  • Sound

Selling price: CHF 725.20 RRP CHF 839.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Class Ae 6/8 Electric Locomotive
Trix 25680 Scale H0
Class Ae 6/8 Electric Locomotive

Prototype Electric locomotive Ae 6/8 of the Bern-Lötschberg-Simplon Railway (BLS). Locomotive from the 2nd production series. Basic dark brown paint scheme with black running gear. Version in the original condition with 2 pantographs and braking resistors in the engine room. With transition plates on the ends and a wrong-line signal. Signum-Integra magnet at locomotive end II. 4 engine room windows and a louvred ventilation grille on each side. Locomotive running number 207. The locomotive looks as it did in the late 1940s/early 1950s. Model The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Both outer driving wheelsets in each drive bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. The wrong-line signal can be controlled separately digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Additional cab lighting, driver's desk lighting and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Highly detailed metal version with many separately applied details. The minimum radius for operation is 360 mm. Brake hoses and imitation screw couplings are included. Length over the buffers 23.3 cm. Highlights Completely new tooling Locomotive from the 2nd production series with the locomotive number 207 Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab, driver's desk and engine room lighting can be controlled digitally With a buffer capacitor to bridge short sections without power Buffer height to NEM standards Note A matching goods wagon set can be found under item no. 46575 in the Märklin H0 assortment, with information about the DC wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 483.65 RRP CHF 569.00

In stock: 1 on the shelf, shipped within 1-3 days

Class Ae 8/14 Electric Locomotive, Road Number 11852
Trix 25590 Scale H0
Class Ae 8/14 Electric Locomotive, Road Number 11852

Prototype Heavy double electric locomotive Ae 8/14 "Landilok" of the Swiss Federal Railways (SBB). Basic dark green paint scheme. Version with 2 pantographs. Sleeve buffers with square buffer plates. Locomotive running number 11852. The locomotive looks as it did in the early 1970s. Model The locomotive has a digital decoder and extensive light and sound functions. There is a regulated high-performance motor with a flywheel in each locomotive half. 4 axles powered in each locomotive half. The triple headlights change over with the direction of travel and 1 white tail lamp will work in conventional operation and can be controlled digitally. They can be switched over to 1 red tail lamp when the locomotive is running alone. Double "A" light function. Maintenance-free warm white and red LEDs are used for the lighting. The wrong-line signal, cab lighting and engine room lighting can be controlled digitally. Close couplers guided in a slot at the ends of the locomotive, separable close coupler between the locomotive halves. Detailed roof equipment with roof lines, insulators and roof walks as well as scissors-type pantographs. Both pantographs can be raised and lowered digitally. The minimum radius for operation is 360 mm. The cut-outs in the front aprons next to the standard pocket can be closed with the filler pieces included. Brake hoses and imitation screw couplings are included. Length over the buffers 39.1 cm. Highlights Completely new tooling Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally Red permission-to-proceed signal can also be controlled digitally Buffer height to NEM standards

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 759.00 RRP CHF 789.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Class Re 4/4 II Electric Locomotive, 1st Production Run
Trix 25420 Scale H0
Class Re 4/4 II Electric Locomotive, 1st Production Run

Prototype Electric locomotive Re 4/4 II, 1st production series, of the Swiss Federal Railways (SBB). Pebble grey/blood orange basic paint scheme as the locomotive for the Swiss Express. Running number 11141. The locomotive looks as it did starting in 1975. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and, together with one white tail lamp (Swiss lighting changeover), will work in conventional operation and can be controlled digitally. The lighting can be switched over to one red tail lamp when the locomotive is running alone. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. The shunting, warning and wrong-line signals can be controlled digitally. The cab and engine room lighting can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Detailed roof fittings with a newly tooled scissors-type pantograph. Many separately applied details such as handrails and the reproduction of the automatic coupler including the transverse linkage. The buffer height conforms to NEM standards. Brake lines, sockets, filler pieces for the pilot and the complete automatic coupler are included as separate plug-in parts. Length over the buffers 17.8 cm. Highlights Completely new tooling in a highly detailed metal version For the "50 Years of the Swiss Express" anniversary. Newly tooled scissors-type pantograph Many separately applied details such as the reproduction of the automatic coupler Cab and engine room lighting can be controlled digitally Shunting, warning and wrong-line signals can also be controlled Close couplers with a guide mechanism With a digital decoder and a wide variety of light and sound functions DCC, mfx and RailCom capable The buffer height conforms to NEM standards. With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Swiss Express Passenger Car Set
Trix 23690 Scale H0
Swiss Express Passenger Car Set

Prototype Four type EW III standard coaches of the Swiss Federal Railways (SBB/CFF/FFS). One type AD half-luggage coach, 1st class, one type WR restaurant car and two type B high-capacity coaches, 2nd class. Pebble grey/blood orange basic paint scheme of the Swiss Express. Route: Genève-Lausanne-Bern-Zürich HB. Car numbers 1, 13 and 14. Restaurant car without a car number. The coaches look as they did starting in 1975. Model Completely new tooling for the EW III coach family. Multi-coloured interior details. All coaches with LED interior lighting fitted as standard. A buffer capacitor is installed in each coach to bridge over brief interruptions in power. Restaurant car with illuminated table lamps. One high-capacity coach has tail lighting fitted as standard. Equipped with separable, current-conducting close couplers. The interior lighting works in conjunction with the restaurant car; the specified vehicle sequence must be observed for this. There is a digital interface in the restaurant car for fitting a function decoder to control various light functions. Type-specific bogies, roof shapes, side walls and underframes with many applied details. Buffer height according to NEM. Separately applied vents, handrails, control lines and steps on the bogies. Printed destination boards and car numbers. Two plug-in transfer end doors, which were fitted on the prototype for transfer runs, are included with each coach. An imitation of an automatic coupler is also included with the coach with car number 14. All coaches individually packaged in additional outer packaging. The minimum radius for operation is 360 mm. Length over the buffers approx. 113.2 cm. Highlights Completely new tooling for the EW III coach family For the "50 years of the Swiss Express" anniversary. Multi-coloured interior details LED interior lighting fitted as standard with buffer capacitors One coach with built-in tail lighting Restaurant car with illuminated table lamps Restaurant car equipped with a digital interface Separable, current-conducting close couplers Many separately applied details Buffer height according to NEM

Selling price: CHF 339.15 RRP CHF 399.00

In stock: 3 on the shelf, shipped within 1-3 days

11% off the recommended price
Class Re 420 Electric Locomotive
Trix 16884 Scale N
Class Re 420 Electric Locomotive

Prototype Class Re 420 electric locomotive of the BLS, wheel arrangement Bo´Bo´, built starting in 1966 for the SBB. The locomotive looks as it did around 2017. Basic paint scheme in white aluminium, with square lamps and one single-arm pantograph. Use: Fast passenger trains. Model The locomotive has a built-in digital decoder and sound generator for operation with mfx and DCC. Motor with a flywheel, 4 axles powered, traction tyres. Headlights and tail lamps changing over with the direction of travel, with warm white LEDs (the tail signal can be switched over and turned off), cab lighting, can be controlled digitally. Length over the buffers 93 mm. Highlights Sound Cab lighting

  • Digital
  • Sound

Selling price: CHF 299.00 RRP CHF 339.00

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
Swiss Express Express Train Car Set Part 1
Trix 18720 Scale N
Swiss Express Express Train Car Set Part 1

Prototype 4 different express coaches of the types EW III of the Swiss Federal Railways (SBB) in the Swiss Express paint scheme, consisting of 1x 1st class with baggage compartment (AD), 1x express train restaurant car (WR) and 2x 2nd class (B). The coaches look as they did around 1975. Model With a guide mechanism for close couplers. Prepared for the later installation of interior lighting. Total length over the buffers 616 mm. The matching interior lighting: 66616 LED interior lighting.

Selling price: CHF 229.00 RRP CHF 269.00

In stock: 1 on the shelf, shipped within 1-3 days

All Trix items

Filter products
15% off the recommended price
Add-On Car Set for the ICE 4
Trix 23971 Scale H0
Add-On Car Set for the ICE 4

Prototype Add-on cars for the ICE 4 high-speed train, class 412/812, of Deutsche Bahn AG (DB AG). 1 intermediate car MW 1, class 812, 1st class. 1 intermediate car TW 1.2, class 412, 1st class. 1 intermediate car MW 2.2-HP, class 812, 2nd class. Add-on for the 9010 multiple unit as ICE 786, for the route München Hbf - Würzburg Hbf - Fulda - Hamburg-Altona. The cars look as they currently do in 2019. Model 3-part add-on to the base set for the ICE 4 to a scale length of 1:87. Special close couplers with a guide mechanism. LED interior lighting fitted as standard. The interior lighting is supplied through the continuous electrical connection running the length of the train and only works and can be controlled digitally in conjunction with the base set. Both pantographs on one intermediate car can only be raised and lowered separately as a digital function by means of the decoder in conjunction with the base set. Overall length 90.5 cm. Highlights LED interior lighting fitted as standard Different lighting scenarios for the interior lighting can only be controlled digitally in conjunction with the base set Pantographs can only be raised and lowered separately as a digital function in conjunction with the base set Note The 22971 base set can be expanded with the 23971 add-on car set as well as with the single 23972 intermediate car.

Selling price: CHF 313.65 RRP CHF 369.00

On order, shipped within 10-15 days

15% off the recommended price
Add-On Car Set for the ICE 4
Trix 23976 Scale H0
Add-On Car Set for the ICE 4

Prototype Add-on cars for the ICE 4 high-speed train, class 412/812, of Deutsche Bahn AG (DB AG). 1 intermediate car MW 1, class 812, 1st class. 1 intermediate car TW 1.2, class 412, 1st class. 1 intermediate car MW 2.2-HP, class 812, 2nd class. Add-on for the ICE 4 with a green stripe and a plug symbol on the two end cars. The cars look as they currently do in 2019. Model 3-part add-on to the base set for the ICE 4 to a scale length of 1:87. Special close couplers with a guide mechanism. LED interior lighting fitted as standard. The interior lighting is supplied through the continuous electrical connection running the length of the train and only works and can be controlled digitally in conjunction with the base set. Both pantographs on one intermediate car can only be raised and lowered separately as a digital function by means of the decoder in conjunction with the base set. Overall length 90.5 cm. Highlights LED interior lighting fitted as standard Different lighting scenarios for the interior lighting can only be controlled digitally in conjunction with the base set Pantographs can only be raised and lowered separately as a digital function in conjunction with the base set Note The 25976 base set can be expanded with the 23976 add-on car set as well as with the single 23978 intermediate car.

Selling price: CHF 313.65 RRP CHF 369.00

On order, shipped within 10-15 days

15% off the recommended price
Add-On Car for the ICE 4
Trix 23978 Scale H0
Add-On Car for the ICE 4

Prototype Add-on car for the ICE 4 high-speed train, class 412/812, of Deutsche Bahn AG (DB AG) as intermediate car TW 2.2, class 412, 2nd class. Add-on for the ICE 4 with a green stripe and a plug symbol on the two end cars. The car looks as it currently does in 2019. Model Add-on to the base set for the ICE 4 to a scale length of 1:87. Special close couplers with a guide mechanism. LED interior lighting fitted as standard. The interior lighting is supplied through the continuous electrical connection running the length of the train and only works and can be controlled digitally in conjunction with the base set. A set of transfers with 3 additional running numbers for this car type is included. Length over the buffers 30.1 cm. Highlights LED interior lighting fitted as standard Different lighting scenarios for the interior lighting can only be controlled digitally in conjunction with the base set Note The 25976 base set can be expanded with the single 23978 intermediate car as well as with the 23976 add-on car set. By using several single intermediate cars, an ICE 4 with a maximum of 12 parts can be made up.

Selling price: CHF 101.15 RRP CHF 119.00

On order, shipped within 10-15 days

14% off the recommended price
Track Cleaning Car
Trix 24050 Scale H0
Track Cleaning Car

Prototype Open wagon with hinged covers K 15 as a service wagon of the German Federal Railway. Former "Wuppertal" class with a brake cabin. Model Built-in cleaning device: vertically movable metal block with 2 parallel, washable and replaceable polishing felts. Hinged covers that can be opened. NEM coupler pocket and a close coupling mechanism for a close coupler. Length over the buffers 8.2 cm. Highlights Suitable for all H0 track systems Gentle cleaning by means of Jörger system special felts Continuous use possible Note AC wheelset E700150. Matching replacement felts are available in a pack of 10 under order number E106291.

Selling price: CHF 39.95 RRP CHF 46.99

On order, shipped within 10-15 days

15% off the recommended price
Branch Line Freight Car Set
Trix 24140 Scale H0
Branch Line Freight Car Set

Prototype Four goods wagons of different types of the German Federal Railway (DB). One type LPwPost branch line baggage van, one type Gmhs 53 covered van, one type Omm 37 open goods wagon and one type Rlmms 56 stake wagon. The wagons look as they did at the end of the 1950s. Model Branch line baggage van with many applied details. Covered van with a barrel roof and panelled side walls. Open goods wagon with wooden side boards and double-leaf side doors. With a load insert representing scrap. Stake wagon with separately applied truss rods. Loaded with logs. Separate plug-in stakes are included. All wagons individually packaged in additional outer packaging. Overall length over the buffers approx. 50.5 cm. AC wheelset E36667900 (baggage van), E700150. Highlights Authentic branch line goods train Two wagons with a load

Selling price: CHF 126.65 RRP CHF 149.00

On order, shipped within 10-15 days

15% off the recommended price
Hinged Roof Car Set
Trix 24169 Scale H0
Hinged Roof Car Set

Prototype Self-unloading hopper wagon set Tds of the Czech company Railco A.S. Set consisting of three pairs of wagons permanently coupled on the prototype. The wagons look as they did in 2019. Model Finely detailed version with many applied details. Separately applied chute extension. Movable swivel roof. The pairs of wagons are connected with a fixed screw coupler. Length over the buffers per wagon approx. 11.2 cm, per pair of wagons approx. 22.5 cm. AC wheelset E700150. Highlights Movable swivel roof covers Wagon type ideal for use in block trains Very finely detailed version

Selling price: CHF 228.65 RRP CHF 269.00

On order, shipped within 10-15 days

15% off the recommended price New
Freight Car Set for Vehicle Transport
Trix 24190 Scale H0
Freight Car Set for Vehicle Transport

Prototype Four type Ks 3300 or Ks 3301 cars with swiveling stakes of the German State Railroad (DR/GDR). Basic red-brown paint scheme. The cars look as they did around 1980. Model All cars with separately applied brake gear, brake controls and swiveling stakes. One stake on each side of the car is printed with the car's running number. Load surface with a wooden plank look. Receptacles on the ends for inserting the included stakes. Buffer height to NEM standards. Ks 3300 with a separately applied underframe beam, in a version without a brakeman's platform and with long end stakes. Rectangular buffer plates. Ks 3301 with separately applied truss rods, in a version with a hand brake platform on the end and short end stakes. Round buffer plates. Buffer height to NEM standards. Each car loaded with two Skoda LIAZ 706 tractors. Chocks and end stakes are included. Models of the tractors from the firm Brekina. Total length over the buffers approx. 65 cm / 25-9/16". DC wheel set E700580. Highlights Folding swiveling stakes One stake on each side of the car printed with the car's running number Many applied details Buffer height to NEM standards. Attractive load

Selling price: CHF 254.15 RRP CHF 299.00

On order, shipped within 10-15 days

14% off the recommended price New
MÁV Freight Car Set
Trix 24191 Scale H0
MÁV Freight Car Set

Prototype Two goods wagons of different types of the Hungarian State Railways (MÁV). A two-axle swivelling stanchion wagon of type Ks and a two-axle high-sided open wagon of type Es. Oxide red basic paint scheme. The vehicles look as they did at the end of the 1970s. Model Swivelling stanchion wagon with separately applied truss rods and long end stakes. With separately applied braking system, brake controls and swivelling stanchions. Loading area with a wooden plank look. Pockets at the ends for fitting the stanchions that are included. Buffer height to NEM. Round buffer heads. High-sided open wagon with truss rods. Both wagons individually packed in additional outer packaging. Total length over the buffers approx. 27.4 cm. AC wheelset E700150. Highlights Folding swivelling stanchions Many applied details Wagons individually packed in additional outer packaging

Selling price: CHF 63.75 RRP CHF 74.99

Pre-order, release expected in Q1 2027

15% off the recommended price
Type Laaes Auto Transport Car
Trix 24332 Scale H0
Type Laaes Auto Transport Car

Prototype Car transporter wagon, type Laaes 541, of the German Federal Railway (DB). Double-deck version. The wagon looks as it did around 1971. Model Fixed close coupler between the wagon halves. The upper deck can be lowered. New running number. Loaded with 8 different models of the VW Type 3 1500 and 1600 from the firm Brekina. Suitable chocks are included. Length over the buffers 25.3 cm. AC wheelset E700150. Highlights New model car load, VW Type 3 1500 and 1600

Selling price: CHF 126.65 RRP CHF 149.00

On order, shipped within 10-15 days

15% off the recommended price New
Type Sdggmrss Double Pocket Car
Trix 24476 Scale H0
Type Sdggmrss Double Pocket Car

Prototype 6-axle double pocket wagon with articulation, type Sdggmrss (T3000e), of TX Logistik AG. Modern carrier wagon for combined freight traffic. Deep black basic paint scheme. Version with four hinged side latches. The vehicle looks as it did starting in 2020. Loaded with two curtain-sided semi-trailers of the haulage company Paneuropa. Model Both carrier wagon halves are metal, movably mounted on the central bogie. Hinged side latches fitted at the factory. Can be folded up for the transport of containers or swap bodies. Many separately applied details such as steps, brake lines and grab rails at the wagon ends. Y25 type bogies. Buffer height to NEM. Kingpin holders in high and low versions as well as air tanks for the wagon ends are included as separate plug-in parts. Loaded with two curtain-sided semi-trailers of the haulage company Paneuropa. Length over the buffers 39.3 cm. AC wheelset E376938. Highlights Detailed version largely made of metal Hinged latches fitted and functional Many separately applied details Buffer height to NEM.Loaded with two semi-trailers

Selling price: CHF 135.15 RRP CHF 159.00

Pre-order, release expected in Q1 2027

15% off the recommended price
BNSF Hopper Car Set
Trix 24911 Scale H0
BNSF Hopper Car Set

Prototype Six coal transport wagons, so-called hopper cars, of the Burlington Northern Santa Fe, LLC (BNSF). Version with five unloading devices on the wagon floor. Current operating condition. Model Detailed bogies with special wheelsets. All of the wagons are equipped with a hand wheel applied at the end and with coal load inserts. For operation with claw couplers, the NEM pockets can be fixed in place with the screws included. All of the wagons are packaged individually in an additional outer box. Length over the couplers for each wagon approx. 19 cm. AC wheelset E320551 (NEM), E320389 (RP25). Highlights All of the wagons with a coal load insert Operation possible with claw couplers and with standard close couplers Ideal for block trains All of the wagons packaged individually in an additional outer box

Selling price: CHF 237.15 RRP CHF 279.00

On order, shipped within 10-15 days

15% off the recommended price New
Steam Locomotive 12.11
Trix 25012 Scale H0
Steam Locomotive 12.11

Prototype Express steam locomotive with tender 12.11 of the Austrian Federal Railways (ÖBB). Version with dual headlights, small DRG lanterns, large smoke deflectors, long dome cover, closed front end and rebuilt tender of the Class 9184. Operating condition 1952. Model The locomotive has a digital decoder and comprehensive sound functions. It features a regulated high-performance drive with a flywheel mounted in the boiler. One axle is powered, and three axles are powered via the coupling rods. It has traction tyres. The locomotive and tender are largely made of metal. A smoke generator is fitted as standard, with speed-dependent, dynamic smoke output. The dual headlights change over with the direction of travel, work in conventional operation, and can be controlled digitally. Cab lighting and firebox flickering can be controlled separately digitally. Running gear lighting is digitally controllable. The lighting uses maintenance-free warm white and red LEDs. It is equipped with a buffer capacitor. Close coupling with a guide mechanism is provided between the locomotive and tender. The tender has a close coupling with a guide mechanism and an NEM pocket. The buffer height on both the locomotive and tender conforms to NEM standards. The minimum radius for operation is 360 mm. Piston rod protective sleeves and brake hoses are included. Length over the buffers is approx. 25.4 cm. Highlights Completely new tooling Express steam locomotive 12.11 with the rebuilt Class 9184 tender available in the Trix range for the first time Particularly fine metal construction A wide range of prototypical details on the boiler, frame and cab Largely prototypical implementation of the running gear frame under the cab Fitted as standard with a smoke generator and speed-dependent dynamic smoke output Cab lighting and firebox flickering can be controlled digitally Running gear lighting can be controlled digitally With RailCom-capable DCC/mfx digital decoder Buffer height according to NEM

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 594.15 RRP CHF 699.00

On order, shipped within 10-15 days

15% off the recommended price
S 2/6 Express Steam Locomotive
Trix T25015
S 2/6 Express Steam Locomotive

Prototype: Bavarian class S 2/6 steam express locomotive in a green basic paint scheme with a black smokebox door and red running gear. Reproduction of the preserved locomotive in the Transportation Museum in Nuremberg. Museum condition as a locomotive of the Royal Bavarian State Railways (K.Bay.Sts.B.) in Era I. Highlights With a "125 Jahre Verkehrsmuseum Nürnberg 1899-2024" display board Detailed version of the locomotive in the museum condition of the Transportation Museum in Nuremberg. Light for meeting trains can be controlled digitally. Cab lighting can be controlled digitally. RailCom-capable DCC/mfx digital decoder with a wide variety of light and sound functions. Product description Model: With a digital decoder and extensive sound functions. Controlled high-performance motor. 2 axles powered. Traction tires. Factory-installed smoke unit. Dual headlights that change over with the direction of travel and smoke unit in operation in conventional mode, can be controlled digitally. Light for meeting trains and cab lighting can also be controlled digitally. Maintenance-free warm white light emitting diodes (LED) for the lighting. Detailed running gear with an open bar frame. Streamlined casing on the smokebox, stack, dome and cylinder group as well as a streamlined cab. Close coupling between the locomotive and tender. Close coupler guided by a mechanism with an NEM pocket on the tender. Minimum radius for operation 360 mm. Piston rod protection sleeves are included separately. Length over buffers 25,1 cm. The class S 2/6 steam express locomotive is being produced in a one-time series for the 125th anniversary of the Transportation Museum in Nuremberg. This model can be found in an AC version in the Märklin H0 assortment under item number 38015.

Selling price: CHF 483.65 RRP CHF 569.00

On order, shipped within 10-15 days

15% off the recommended price
Saxon Pride Class 19.0 Steam Locomotive
Trix 25019 Scale H0
Saxon Pride Class 19.0 Steam Locomotive

Prototype Class 19.0 "Sachsenstolz" express steam locomotive (Saxon class XX HV), with a Saxon 2´2 T31 coal tender. Deutsche Reichsbahn of the DDR (DR/DDR). With large smoke deflectors. Locomotive running number 19 016. The locomotive looks as it did in Era IIIa, at the beginning of the 1950s. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. 4 axles powered. Traction tyres. The locomotive and tender are largely constructed of metal. A smoke unit is fitted as standard, with speed-dependent, dynamic smoke output. The dual headlights change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The cab lighting and the firebox flickering can each be controlled separately digitally. The lighting uses maintenance-free warm white and red LEDs. It has a buffer capacitor. Swivelling cab doors and an imitation of the curtains between the cab and the tender. There is a close coupler with a guide mechanism between the locomotive and the tender. The tender has a close coupler with a guide mechanism and an NEM pocket. The buffer height on the locomotive and tender conforms to NEM. The minimum radius for operation is R2, 437.5 mm. Piston rod protective sleeves and brake hoses are included. Length over the buffers 26.0 cm. Highlights Completely new development Especially fine metal construction A multitude of separately applied details Fitted as standard with a smoke unit and speed-dependent, dynamic smoke output Cab lighting and firebox flickering can be controlled digitally. RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Buffer height on the locomotive and tender conforms to NEM. With a buffer capacitor to bridge short sections without power Note A matching express coach set and a coach to go with them can be found under item nos. 42514 and 42522 in the Märklin H0 assortment, with information about the DC wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 577.15 RRP CHF 679.00

On order, shipped within 10-15 days

15% off the recommended price
Class 18.3 Steam Locomotive
Trix 25029 Scale H0
Class 18.3 Steam Locomotive

Prototype Express steam locomotive 18 314 with oil firing and a 2´2´T34 oil tender of the Deutsche Reichsbahn of the DDR (DR/DDR). Rebuilt version as a test locomotive of the VES-M Halle (Saale). Version with a Reko boiler and partial cladding, based on the steam locomotive 18 314 (former Baden IVh). With Witte smoke deflectors and Indusi on one side. The locomotive looks as it did around 1968. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. 3 axles powered. Traction tyres. The locomotive and tender are largely constructed of metal. A smoke unit is fitted as standard, with speed-dependent, dynamic smoke output. The triple headlights change over with the direction of travel, will work in conventional operation, and can be controlled digitally. In addition, two red lamps at the front of the locomotive can be controlled digitally. The cab lighting and the running gear lighting can be controlled separately digitally. The lighting uses maintenance-free warm white and red LEDs. It has a buffer capacitor. There is a close coupler with a guide mechanism between the locomotive and the tender. The tender has a close coupler with a guide mechanism and an NEM pocket. The minimum radius for operation is 360 mm. For large radii or for a display case, a cladding piece without a wheel cut-out below the cab is included as a replacement. Piston rod protective sleeves and brake hoses are also included. Length over the buffers 27.2 cm. Highlights Especially fine metal construction A multitude of separately applied details Fitted as standard with a smoke unit and speed-dependent, dynamic smoke output Cab lighting and running gear lighting can be controlled digitally. RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 560.15 RRP CHF 659.00

On order, shipped within 10-15 days

Flash offer 25% off the recommended price New
Class Ae 4/4 Electric Locomotive
Trix 25044 Scale H0
Class Ae 4/4 Electric Locomotive

Prototype Ae 4/4 electric locomotive of the Bern-Lötschberg-Simplon Railway (BLS). Basic paint scheme in nut brown. Running number 251. Current operating condition as a working museum locomotive of BLS Historic. Model The locomotive has a digital decoder and comprehensive sound functions. It features a centrally mounted, regulated high-performance drive with a flywheel. All four axles are powered using cardan shafts. It has traction tyres. The triple headlights and a white tail lamp (Swiss lighting changeover) change over with the direction of travel, will work in conventional operation and can be controlled digitally. In solo running, the lighting can be switched to a red tail lamp. The headlights at locomotive end 2 and end 1 can each be switched off separately via digital control. Warning signals, wrong-line signals, and long-distance headlights are digitally controllable. Cab and engine room lighting are digitally controllable. The lighting uses maintenance-free warm white and red LEDs. It is equipped with a buffer capacitor. The roof superstructures are detailed and feature a newly designed pantograph. The pantograph can be raised and lowered digitally. There are many separately applied details. The buffer height conforms to NEM standards. Brake lines, screw couplings, and closed rail guards are supplied as separate plug-in parts. Length over the buffers is 17.9 cm. Highlights Completely new tooling in a highly detailed metal version Newly designed scissors-type pantograph, can be raised and lowered digitally Many separately applied details Cab and engine room lighting can be controlled digitally Additionally switchable warning and wrong-line signals, plus long-distance headlight Close couplings with a guide mechanism Supplied with a digital decoder and a wide range of light and sound functions Capable of DCC, mfx and RailCom Buffer height according to NEM. Supplied with a buffer capacitor to bridge short sections without power.

  • Digital
  • Sound

Selling price: CHF 333.00 RRP CHF 449.00

Pre-order, release expected in Q1 2027

13% off the recommended price New
Class 80 Steam Locomotive
Trix 25080 Scale H0
Class 80 Steam Locomotive

Prototype Class 80 tank locomotive of the German Federal Railroad. Version with three boiler domes, bell and turbo generator on the left, smoke box door without a central locking mechanism and with the number plate in the center. Basic deep black paint scheme. Running number 80 016. The locomotive looks as it did around 1953. Model With a digital decoder and extensive sound functions. Regulated high-performance motor with a flywheel in the boiler. Three axles powered. Traction tires. Locomotive made largely of metal. Factory-installed smoke generator. Dual headlights that change over with the direction of travel and the smoke generator contact will work in conventional operation and can be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. With a buffer capacitor. Telex couplers on the front and rear can each be controlled separately digitally. Numerous applied grab irons and lines. Buffer height to NEM standards. Brake lines are included as separate parts to be plugged in. Length over the buffers 11.1 cm / 4-3/8". Highlights Delicate version made largely of metal Unobstructed view between the frame and the boiler Many separately applied details For the first time with a smoke generator, factory-installed Unobstructed view through the cab With Telex couplers on the front and rear that can be controlled separately digitally Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom capable With a buffer capacitor for bridging short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

Pre-order, release expected in November 2026

15% off the recommended price
Class 1189 Electric Locomotive
Trix 25090 Scale H0
Class 1189 Electric Locomotive

Prototype Class 1189 "Österreichisches Krokodil" electric locomotive of the Austrian Federal Railways (ÖBB). Basic blood orange paint scheme. Running number 1189.02. The locomotive looks as it did in the middle to the end of the 1970s. Model The locomotive has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a centrally mounted flywheel. 2 driving wheels in each of the two drive bogies are powered using cardan shafts. Traction tyres. Articulated running gear able to negotiate tight curves. The triple headlights and one red tail lamp change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The lighting can be switched over to one white tail lamp. The headlights at locomotive ends 2 and 1 can each be turned off separately digitally. Double "A" light function. The cab lighting and the engine room lighting can each be controlled separately digitally. The lighting uses maintenance-free warm white and red LEDs. Highly detailed metal version with many separately applied details. Brake hoses and imitation screw couplings are included as separate plug-in parts. Length over the buffers approximately 23.4 cm. Highlights Tooling changes for the prototypical reproduction of the 1189.02 Highly detailed metal version Many separately applied details Cab and engine room lighting can be controlled digitally Digital decoder with extensive operating and sound functions DCC, mfx, and RailCom capable

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 492.15 RRP CHF 579.00

On order, shipped within 10-15 days

15% off the recommended price New
Class 1189 Electric Locomotive
Trix 25092 Scale H0
Class 1189 Electric Locomotive

Prototype Class 1189 "Austrian Crocodile" electric locomotive of the Austrian Federal Railways (ÖBB). Version with a basic fir green paint scheme. Running number 1189.08. The locomotive looks as it did in the mid to late 1970s. Model With a digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted. 2 driving wheels in each of the two powered frames driven via cardan shafts. Traction tires. Articulated chassis that runs smoothly on curves. Triple headlights and one red marker light that change over with the direction of travel will work in conventional operation and can be controlled digitally. The lighting can be switched to one white marker light. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. When the headlights are off at both ends of the locomotive, the switching light function is on at both ends (1 white light at each end). Cab and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details, such as cooling pipes for the transformer oil. Cab and engine room interior details. Detailed roof equipment. Minimum radius for operation 360 mm. Brake hoses and imitation screw couplings are included. Length over the buffers approx. 23.4 cm. Highlights New locomotive running number 1189.08 RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 500.65 RRP CHF 589.00

On order, shipped within 10-15 days

13% off the recommended price
Class 211 Diesel Locomotive
Trix 25101 Scale H0
Class 211 Diesel Locomotive

Prototype Class 211 diesel locomotive of the German Federal Railway (DB). The locomotive looks as it did around 1981. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All 4 axles are powered using cardan shafts. Traction tyres. The triple headlights and 2 red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at both ends of the locomotive can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, the double "A" light function is active at both ends. The cab lighting can be controlled digitally. The lighting uses maintenance-free warm white and red LEDs. Detailed buffer beam. Brake hoses that can be plugged in are included. Length over the buffers approximately 13.9 cm. Highlights Cab lighting can be controlled digitally Metal body Centre motor, all four axles powered using cardan shafts RailCom-capable DCC/mfx digital decoder with extensive sound functions

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 293.05 RRP CHF 339.00

On order, shipped within 10-15 days

13% off the recommended price
Class 1100 Electric Locomotive
Trix 25110 Scale H0
Class 1100 Electric Locomotive

Prototype Class 1100 electric locomotive of the Dutch Railways (NS). Locomotive from the 1st production run, without front reinforcement. Dark blue locomotive body with black running gear. With raised decorative trim strips. Bogies with rounded cut-outs. Locomotive running number 1108. The locomotive looks as it did in the middle of the 1970s. Model The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All four axles are powered using cardan shafts. Traction tyres. The triple headlights, in the form of an inverted L signal (2 x yellow below, 1 x white above), and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, there is shunting lighting of 1 x yellow below at each end of the locomotive. The cab lighting and the engine room lighting can each be controlled separately digitally. The lighting uses maintenance-free yellow, warm white, and red LEDs. It has a buffer capacitor. Detailed roof equipment with newly tooled Faively G5 scissors pantographs. Close couplers in standard pockets on the bogies. The buffer height conforms to NEM. Brake lines and screw couplers are included as separate plug-in parts. Length over the buffers 14.9 cm. Highlights Completely new tooling A one-time series for the anniversary "75 Jahre Elektrolokomotive Serie 1100". Locomotive from the 1st production run, without front reinforcement (locomotive numbers 1101 to 1150) Finely detailed metal version with many separately applied details Cab lighting and engine room lighting can be controlled digitally Close couplers in standard pockets RailCom-capable DCC/mfx digital decoder with extensive light and sound functions With a buffer capacitor to bridge short sections without power Buffer height conforms to NEM Note A matching set of spherical tank wagons can be found in the Märklin H0 assortment under item no. 46632, with information about the DC wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

On order, shipped within 10-15 days

13% off the recommended price New
Class 1100 Electric Locomotive
Trix 25111 Scale H0
Class 1100 Electric Locomotive

Prototype Class 1100 electric locomotive of the Dutch Railways (NS). Current condition as a museum locomotive in the Railway Museum Utrecht. Locomotive from the 1st construction series, without front reinforcement. Colour-approximated condition of the 1950s at entry into service with a turquoise body and agate grey running gear. With raised decorative strips. Bogies with square cut-outs. Locomotive running number 1125. Current museum condition. Model With a digital decoder and extensive light and sound functions. Regulated high-performance drive with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. Dual headlights and two red tail lamps at the top change over with the direction of travel, will work in conventional operation, can be controlled digitally. Special L-signal function (2 x yellow at the bottom, 1 x white at the top) can additionally be controlled digitally. Headlights at locomotive end 2 and 1 can each be switched off separately in digital operation. When the headlights are switched off at both locomotive ends, shunting lighting 1 x yellow at the bottom on each locomotive end. Cab lighting and engine room lighting can each be controlled separately digitally. Lighting with maintenance-free yellow, warm white and red LEDs. With a buffer capacitor. Finely detailed roof superstructures with newly tooled Faively G5 scissors-type pantographs. Close couplings in the standard pocket on the bogie. Buffer height according to NEM. Brake lines and screw couplings are included as separately plug-in parts. Length over the buffers 14.9 cm. Highlights New tooling with prototypical detail changes Version of the museum locomotive with locomotive number 1125 of the Railway Museum in Utrecht Locomotive from the 1st construction series, without front reinforcement (locomotive numbers 1101 to 1150) Delicate metal version with many separately applied details Cab lighting and engine room lighting can be controlled digitally Close couplings in the standard pocket RailCom-capable DCC/mfx digital decoder with extensive light and sound functions With a buffer capacitor for bridging short sections without power Buffer height according to NEM

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

On order, shipped within 10-15 days

13% off the recommended price
Class E10.3 Electric Locomotive
Trix 25128 Scale H0
Class E10.3 Electric Locomotive

Prototype Class E10.3 electric locomotive of the German Federal Railway (DB). Locomotive body with an aerodynamic front, the so-called "Bügelfalte", with a continuous ventilation grille band, a wraparound rain gutter, and handrails on the ends. With buffer cladding and a skirt. Steel blue locomotive body with a stone grey frame. Locomotive running number E10 384. The locomotive looks as it did around 1967. Model The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All four axles are powered using cardan shafts. Traction tyres. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be turned off separately digitally. Double "A" light function. The cab lighting can be controlled digitally. The lighting uses maintenance-free warm white and red LEDs. It has a buffer capacitor. Detailed roof equipment with type DBS 54 pantographs. The pantographs can be raised and lowered digitally. The buffer height conforms to NEM. Close couplers with a guide mechanism. Brake lines, heating lines, and screw couplers are included as separate plug-in parts. Length over the buffers 18.9 cm. Highlights With detailed type DBS 54 pantographs, without visible mounting Pantographs can be raised and lowered digitally Cab lighting can be controlled digitally Close couplers with a guide mechanism RailCom-capable DCC/mfx digital decoder with extensive light and sound functions With a buffer capacitor to bridge short sections without power Buffer height conforms to NEM

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 388.10 RRP CHF 449.00

On order, shipped within 10-15 days

13% off the recommended price
Class 1800 Electric Locomotive
Trix 25161 Scale H0
Class 1800 Electric Locomotive

Prototype Class 1800 electric locomotive of Strukton Rail B.V. Basic yellow paint scheme with a striking side design by Strukton Rail. Running number 1824 "Nicole". The locomotive looks as it did starting at the end of 2021, with additional decals for "100 Jahre Strukton". Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All four axles are powered using cardan shafts. Traction tyres. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be turned off separately digitally. Additional light functions such as various shunting lights and danger signals can be controlled separately. The cab lighting can be controlled digitally. The lighting uses maintenance-free yellow and red LEDs. The pantographs can be raised and lowered digitally. Separately applied windscreen wipers, ventilation grilles, handrails, and roof lines. The buffer height conforms to NEM. Brake lines are included as separate plug-in parts. Length over the buffers approximately 20.3 cm. Highlights Finely detailed metal version with many separately applied details Pantographs can be raised and lowered digitally Cab lighting can be controlled digitally Many switchable shunting and special signals Buffer height conforms to NEM. Digital decoder with extensive operating and sound functions DCC, mfx, and RailCom capable One-time series This model is available in H0 gauge exclusively from Trix and Märklin.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 370.85 RRP CHF 429.00

On order, shipped within 10-15 days