Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Trix H0 and Minitrix

Trix, SBB and European trains in H0 and N

Crocodile, Landilok, Swiss Express Re 4/4 II and Giruno of the SBB, BLS Ae 6/8, plus trains from Germany and across Europe: Trix models the railway in 1:87 on two-rail DC, and in 1:160 with Minitrix.

Choose a family See all items

  • 692items in the shop
  • 1:87 and 1:160Trix H0 and Minitrix
  • Since 1964Minitrix and NEM two-rail
SBB Be 6/8 II Crocodile locomotive, Trix H0 model in 1:87, on a scenic layout

What Trix brings to your layout

  • The great Swiss locomotives: Be 6/8 II Crocodile, Ae 8/14 Landilok, Swiss Express Re 4/4 II, Giruno and RAe 4/8 Churchill of the SBB, Ae 6/8 and Re 420 of the BLS.
  • Two-rail, direct current: since 1964 Trix has run on two-rail DC to NEM standards. The models run on analogue or DCC layouts and register via mfx in the märklin digital system.
  • Minitrix, N scale: launched in 1964, Minitrix covers 1:160: locomotives, coaches, wagons and a complete track system, also with concrete sleepers.
  • A Nuremberg house: grown out of the firm J. Hafner, founded in 1838, Trix has been part of the Märklin group since 1997.

Our favourites for a Swiss layout

Class Be 6/8 II "Crocodile" Electric Locomotive
Trix 25596 Scale H0
Class Be 6/8 II "Crocodile" Electric Locomotive

Prototype Electric locomotive, series Be 6/8 II "Krokodil" of the Swiss Federal Railways (SBB). Type from the first production series. Basic fir green paint scheme. With 2 cab doors, wide shunting steps on the engine hoods and bow-shaped grab rails, sleeve buffers, without transition plates, with a wrong-line signal and Signum-Integra magnets. Locomotive running number 13254. The locomotive looks as it did between 1960 and 1965. Model The locomotive has a digital decoder and extensive sound functions. It also has 2 regulated high-performance drives with flywheels, 1 motor in each drive bogie. 3 axles and a jackshaft powered in each. Traction tyres. Articulated running gear able to negotiate tight curves. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details. 3-part locomotive body with engine hoods that swing out. Detailed roof equipment with a safety grille below the pantographs. Length over the buffers 22.3 cm. Highlights Highly detailed metal version Prototypically adapted details with only 2 cab doors and wide shunting steps Locomotive with 2 high-performance drives and flywheels With a RailCom-capable DCC/mfx digital decoder and a variety of operating and sound functions

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 519.90 RRP CHF 559.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Class RABe 501 Giruno High-Speed Rail Car Train
Trix 25810 Scale H0
Class RABe 501 Giruno High-Speed Rail Car Train

Prototype EC 250 electric high-speed multiple unit as the RABe 501 "Giruno" of the Swiss Federal Railways (SBB). 1 end car A (Bt1), 2nd class. 1 intermediate car F (B7), 2nd class, with entrances for the handicapped and a pantograph. 1 intermediate car G (WR6), with a restaurant area. 1 intermediate car H (A5), 1st class, with entrances for the handicapped and a pantograph. 1 end car L (At2), 1st class. In use as a multi-system multiple unit between Zurich Airport and Basel as well as across the Alps through the Gotthard Base Tunnel as far as Milan. Approval also planned for Germany and Austria. Train number RABe 501 003, with the "San Gottardo" coat of arms. Current operating condition 2022. Model 5-part base set. The restaurant car G and the two intermediate cars F and H arranged to the left and right of it are permanently coupled to one another by means of the Jacobs bogies. The unit has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a flywheel, centrally mounted in the restaurant car. All 4 axles in both Jacobs bogies to the left and right of the restaurant car powered using cardan shafts. Traction tyres. The cabs in the end cars have interior details. Power supply by way of the leading end car, depending on the direction of travel. Guide mechanism in the Jacobs bogies. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. They can be changed over to a single white tail lamp (Swiss lighting changeover). Additional separately controllable light functions. Interior lighting fitted as standard. The interior lighting is supplied by way of the continuous electrical connection running through the whole train. In addition, the cab lighting and the driver's desk lighting can each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for all of the lighting. The pantographs on the intermediate cars F and H can each be raised and lowered separately as a digital function. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the base set approximately 112 cm. Highlights Completely new tooling True-to-scale reproduction 1:87. LED interior lighting fitted as standard Cab lighting and driver's desk lighting can be controlled digitally Pantographs on the intermediate cars F and H can be raised and lowered by means of a digital function Digital decoder with extensive light and sound functions Train number RABe 501 003, with the "San Gottardo" coat of arms Note The 5-part base set 25810 can be expanded with the 2-part add-on car sets 23281, 23282, and 23283 to make a prototypical 11-part multiple unit.

  • 2-rail, direct current
  • Sound

Selling price: CHF 725.20 RRP CHF 839.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Class Ae 6/8 Electric Locomotive
Trix 25680 Scale H0
Class Ae 6/8 Electric Locomotive

Prototype Electric locomotive Ae 6/8 of the Bern-Lötschberg-Simplon Railway (BLS). Locomotive from the 2nd production series. Basic dark brown paint scheme with black running gear. Version in the original condition with 2 pantographs and braking resistors in the engine room. With transition plates on the ends and a wrong-line signal. Signum-Integra magnet at locomotive end II. 4 engine room windows and a louvred ventilation grille on each side. Locomotive running number 207. The locomotive looks as it did in the late 1940s/early 1950s. Model The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Both outer driving wheelsets in each drive bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. The wrong-line signal can be controlled separately digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Additional cab lighting, driver's desk lighting and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Highly detailed metal version with many separately applied details. The minimum radius for operation is 360 mm. Brake hoses and imitation screw couplings are included. Length over the buffers 23.3 cm. Highlights Completely new tooling Locomotive from the 2nd production series with the locomotive number 207 Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab, driver's desk and engine room lighting can be controlled digitally With a buffer capacitor to bridge short sections without power Buffer height to NEM standards Note A matching goods wagon set can be found under item no. 46575 in the Märklin H0 assortment, with information about the DC wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 483.65 RRP CHF 569.00

In stock: 1 on the shelf, shipped within 1-3 days

Class Ae 8/14 Electric Locomotive, Road Number 11852
Trix 25590 Scale H0
Class Ae 8/14 Electric Locomotive, Road Number 11852

Prototype Heavy double electric locomotive Ae 8/14 "Landilok" of the Swiss Federal Railways (SBB). Basic dark green paint scheme. Version with 2 pantographs. Sleeve buffers with square buffer plates. Locomotive running number 11852. The locomotive looks as it did in the early 1970s. Model The locomotive has a digital decoder and extensive light and sound functions. There is a regulated high-performance motor with a flywheel in each locomotive half. 4 axles powered in each locomotive half. The triple headlights change over with the direction of travel and 1 white tail lamp will work in conventional operation and can be controlled digitally. They can be switched over to 1 red tail lamp when the locomotive is running alone. Double "A" light function. Maintenance-free warm white and red LEDs are used for the lighting. The wrong-line signal, cab lighting and engine room lighting can be controlled digitally. Close couplers guided in a slot at the ends of the locomotive, separable close coupler between the locomotive halves. Detailed roof equipment with roof lines, insulators and roof walks as well as scissors-type pantographs. Both pantographs can be raised and lowered digitally. The minimum radius for operation is 360 mm. The cut-outs in the front aprons next to the standard pocket can be closed with the filler pieces included. Brake hoses and imitation screw couplings are included. Length over the buffers 39.1 cm. Highlights Completely new tooling Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally Red permission-to-proceed signal can also be controlled digitally Buffer height to NEM standards

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 759.00 RRP CHF 789.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Class Re 4/4 II Electric Locomotive, 1st Production Run
Trix 25420 Scale H0
Class Re 4/4 II Electric Locomotive, 1st Production Run

Prototype Electric locomotive Re 4/4 II, 1st production series, of the Swiss Federal Railways (SBB). Pebble grey/blood orange basic paint scheme as the locomotive for the Swiss Express. Running number 11141. The locomotive looks as it did starting in 1975. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and, together with one white tail lamp (Swiss lighting changeover), will work in conventional operation and can be controlled digitally. The lighting can be switched over to one red tail lamp when the locomotive is running alone. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. The shunting, warning and wrong-line signals can be controlled digitally. The cab and engine room lighting can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Detailed roof fittings with a newly tooled scissors-type pantograph. Many separately applied details such as handrails and the reproduction of the automatic coupler including the transverse linkage. The buffer height conforms to NEM standards. Brake lines, sockets, filler pieces for the pilot and the complete automatic coupler are included as separate plug-in parts. Length over the buffers 17.8 cm. Highlights Completely new tooling in a highly detailed metal version For the "50 Years of the Swiss Express" anniversary. Newly tooled scissors-type pantograph Many separately applied details such as the reproduction of the automatic coupler Cab and engine room lighting can be controlled digitally Shunting, warning and wrong-line signals can also be controlled Close couplers with a guide mechanism With a digital decoder and a wide variety of light and sound functions DCC, mfx and RailCom capable The buffer height conforms to NEM standards. With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Swiss Express Passenger Car Set
Trix 23690 Scale H0
Swiss Express Passenger Car Set

Prototype Four type EW III standard coaches of the Swiss Federal Railways (SBB/CFF/FFS). One type AD half-luggage coach, 1st class, one type WR restaurant car and two type B high-capacity coaches, 2nd class. Pebble grey/blood orange basic paint scheme of the Swiss Express. Route: Genève-Lausanne-Bern-Zürich HB. Car numbers 1, 13 and 14. Restaurant car without a car number. The coaches look as they did starting in 1975. Model Completely new tooling for the EW III coach family. Multi-coloured interior details. All coaches with LED interior lighting fitted as standard. A buffer capacitor is installed in each coach to bridge over brief interruptions in power. Restaurant car with illuminated table lamps. One high-capacity coach has tail lighting fitted as standard. Equipped with separable, current-conducting close couplers. The interior lighting works in conjunction with the restaurant car; the specified vehicle sequence must be observed for this. There is a digital interface in the restaurant car for fitting a function decoder to control various light functions. Type-specific bogies, roof shapes, side walls and underframes with many applied details. Buffer height according to NEM. Separately applied vents, handrails, control lines and steps on the bogies. Printed destination boards and car numbers. Two plug-in transfer end doors, which were fitted on the prototype for transfer runs, are included with each coach. An imitation of an automatic coupler is also included with the coach with car number 14. All coaches individually packaged in additional outer packaging. The minimum radius for operation is 360 mm. Length over the buffers approx. 113.2 cm. Highlights Completely new tooling for the EW III coach family For the "50 years of the Swiss Express" anniversary. Multi-coloured interior details LED interior lighting fitted as standard with buffer capacitors One coach with built-in tail lighting Restaurant car with illuminated table lamps Restaurant car equipped with a digital interface Separable, current-conducting close couplers Many separately applied details Buffer height according to NEM

Selling price: CHF 339.15 RRP CHF 399.00

In stock: 3 on the shelf, shipped within 1-3 days

11% off the recommended price
Class Re 420 Electric Locomotive
Trix 16884 Scale N
Class Re 420 Electric Locomotive

Prototype Class Re 420 electric locomotive of the BLS, wheel arrangement Bo´Bo´, built starting in 1966 for the SBB. The locomotive looks as it did around 2017. Basic paint scheme in white aluminium, with square lamps and one single-arm pantograph. Use: Fast passenger trains. Model The locomotive has a built-in digital decoder and sound generator for operation with mfx and DCC. Motor with a flywheel, 4 axles powered, traction tyres. Headlights and tail lamps changing over with the direction of travel, with warm white LEDs (the tail signal can be switched over and turned off), cab lighting, can be controlled digitally. Length over the buffers 93 mm. Highlights Sound Cab lighting

  • Digital
  • Sound

Selling price: CHF 299.00 RRP CHF 339.00

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
Swiss Express Express Train Car Set Part 1
Trix 18720 Scale N
Swiss Express Express Train Car Set Part 1

Prototype 4 different express coaches of the types EW III of the Swiss Federal Railways (SBB) in the Swiss Express paint scheme, consisting of 1x 1st class with baggage compartment (AD), 1x express train restaurant car (WR) and 2x 2nd class (B). The coaches look as they did around 1975. Model With a guide mechanism for close couplers. Prepared for the later installation of interior lighting. Total length over the buffers 616 mm. The matching interior lighting: 66616 LED interior lighting.

Selling price: CHF 229.00 RRP CHF 269.00

In stock: 1 on the shelf, shipped within 1-3 days

All Trix items

Filter products
15% off the recommended price New
Class S 3/6 Steam Locomotive, the “Hochhaxige” / “High Stepper”
Trix 25435 Scale H0
Class S 3/6 Steam Locomotive, the “Hochhaxige” / “High Stepper”

Prototype Bavarian Class S 3/6 express steam locomotive with a 2'2 T32.5 coal tender. Royal Bavarian State Railways (K.Bay. Sts. B.). Sub-class d, the "High Stepper" with 2,000 mm / 78-3/4" driving wheels. Running number 3627. The locomotive looks as it did around 1912. Model With a digital decoder and extensive sound functions. Regulated high-performance motor with a flywheel in the boiler. 3 axles powered. Locomotive and tender made largely of metal. Delicate metal running gear with an open bar frame. Unobstructed view through the running gear. Dual headlights that change over with the direction of travel will work in conventional operation and can be controlled digitally. Light for meeting oncoming trains can be controlled separately. Lamps designed in white. Maintenance-free warm white LEDs are used for the lighting. Factory-installed smoke unit works in conventional operation. Detailed rendering of the cab, cab lighting can be controlled digitally. Close coupling mechanism between the locomotive and tender with a "display position". Close coupler with a guide mechanism and an NEM pocket on the tender. Buffer height on the front to NEM standards. Delicate smoke box door steps, hook coupler and air hose for the rear of the tender as well as piston rod protection sleeves included. Length over the buffers 26.7 cm. Highlights Delicate metal running gear with an open bar frame Distinctive large driving wheels (prototype diameter 2,000 mm) Factory-installed smoke unit Detailed cab with cab lighting that can be controlled digitally RailCom-capable DCC/mfx digital decoder with extensive sound and light functions With a buffer capacitor for bridging short sections without power Buffer height on the front to NEM standards

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 534.65 RRP CHF 629.00

Pre-order, release expected in Q1 2027

13% off the recommended price
Type GE ES44AC Diesel Locomotive
Trix 25446 Scale H0
Type GE ES44AC Diesel Locomotive

Prototype Heavy diesel-electric goods locomotive, type General Electric ES44AC, of the Burlington Northern Santa Fe, LLC (BNSF). Orange basic paint scheme. Running number 6259. Current operating condition. Model The locomotive has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Two axles in each bogie powered using cardan shafts. Traction tyres. Headlights that can be controlled independently of the direction of travel, consisting of four lamps at the front and two lamps positioned side by side at the rear of the locomotive. The headlights will work in conventional operation and can be turned off separately in pairs in digital operation. The cab lighting, the running number boards, the long-distance headlight and the flashing function of the headlights can be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. Smoke generator with dynamic smoke output fitted as standard, can be controlled digitally. Many separately applied details. For operation with claw couplers, the NEM pocket can be fixed in place with the clamping pieces included. A pilot with a smaller cut-out for the front, brake hoses and two clamping pieces for the NEM pocket are included. Length over the couplers approximately 27 cm. Highlights Smoke generator with dynamic smoke output fitted as standard Many controllable light and sound functions Cab lighting can be controlled digitally Illuminated running number boards can be controlled digitally Long-distance headlight can be switched on Centrally mounted motor, four axles powered using cardan shafts Operation possible with claw couplers and normal close couplers Digital decoder with extensive operating and sound functions DCC, mfx and RailCom capable

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 431.25 RRP CHF 499.00

On order, shipped within 10-15 days

13% off the recommended price
Type GE ES44AC Diesel Locomotive
Trix 25447 Scale H0
Type GE ES44AC Diesel Locomotive

Prototype Heavy diesel-electric goods locomotive, type General Electric ES44AC, of the Burlington Northern Santa Fe, LLC (BNSF). Orange basic paint scheme. Running number 5736. Current operating condition. Model The locomotive has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Two axles in each bogie powered using cardan shafts. Traction tyres. Headlights that can be controlled independently of the direction of travel, consisting of four lamps at the front and two lamps positioned side by side at the rear of the locomotive. The headlights will work in conventional operation and can be turned off separately in pairs in digital operation. The cab lighting, the running number boards, the long-distance headlight and the flashing function of the headlights can be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. Smoke generator with dynamic smoke output fitted as standard, can be controlled digitally. Many separately applied details. For operation with claw couplers, the NEM pocket can be fixed in place with the clamping pieces included. A pilot with a smaller cut-out for the front, brake hoses and two clamping pieces for the NEM pocket are included. Length over the couplers approximately 27 cm. Highlights Smoke generator with dynamic smoke output fitted as standard Many controllable light and sound functions Cab lighting can be controlled digitally Illuminated running number boards can be controlled digitally Long-distance headlight can be switched on Centrally mounted motor, four axles powered using cardan shafts Operation possible with claw couplers and normal close couplers Digital decoder with extensive operating and sound functions DCC, mfx and RailCom capable

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 431.25 RRP CHF 499.00

On order, shipped within 10-15 days

13% off the recommended price
Siemens Desiro HC Electric Powered Train
Trix 25462 Scale H0
Siemens Desiro HC Electric Powered Train

Prototype Electric multiple unit of the type Siemens Desiro HC as the class 1462/1862 of the Deutsche Bahn AG (DB AG). One end car of the class 1462.0, 2nd class, one intermediate car of the class 1862.0, 2nd class, one intermediate car of the class 1862.5, 2nd class and one end car of the class 1462.5, 1st/2nd class. Vehicle of the Franken-Südthüringen network. Traffic red basic paint scheme. The train looks as it did starting in December 2023. Model The train has a digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted in end car A. All four axles in both bogies powered using cardan shafts. Traction tyres. Power is supplied by the leading end car depending on the direction of travel. Special close couplers with a guide mechanism. The triple headlights change over with the direction of travel and, together with two red tail lamps, will work in conventional operation and can be controlled digitally. Double "A" light function. The prototypical long-distance headlight in two intensities, the cab and driver's desk lighting as well as the lighting for the destination displays on the ends and sides can be controlled digitally. LED interior lighting fitted as standard. A buffer capacitor is installed in each car to bridge brief sections without power. The interior lighting is supplied through the continuous electrical connection running the length of the train. Maintenance-free warm white and red LEDs are used for all of the lighting. Multi-coloured interior details. The pantographs can be raised and lowered digitally. Many separately applied details. The minimum radius for operation is 360 mm. Length of the train approximately 112.6 cm. Highlights Completely new tooling in a highly detailed version LED interior lighting with buffer capacitors fitted as standard Multi-coloured interior details Pantographs can be raised and lowered digitally Lighting for the destination displays can be controlled digitally Long-distance headlight in two intensity levels can be controlled digitally Cab and driver's desk lighting can be controlled digitally Many separately applied details Digital decoder with extensive light and sound functions DCC, mfx and RailCom capable

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 604.15 RRP CHF 699.00

On order, shipped within 10-15 days

15% off the recommended price
Class 101 Electric Locomotive Raw Metal Edition
Trix Scale H0
Class 101 Electric Locomotive Raw Metal Edition

Prototype: Class 101 express locomotive in the metallic look of the raw materials, with only a clear protective coat. In addition, the locomotive is decorated with the raised printed logo of Wacken Open Air (W:O:A®). Highlights Extraordinary look: the metal construction of the locomotive remains visible. W:O:A® logo printed in relief with 3D digital printing. With a power buffer to bridge short sections without current. Central motor, drive on all 4 axles. Cab lighting. Close coupler mechanism. DCC, mfx and RailCom capable. Product description Model: With a digital decoder and extensive sound functions. Controlled high-performance motor. 4 axles powered. Traction tires. Triple headlights and 2 red marker lights that change over with the direction of travel, in operation in conventional mode, can be controlled digitally. Long distance headlights can be controlled separately. Cab lighting can be controlled digitally. Headlights at locomotive end 2 and 1 can each be turned off separately in digital operation. When the headlights are turned off at both ends of the locomotive, the double A light function is active at both ends. Maintenance-free warm white and red light emitting diodes (LED) for the lighting. With a power buffer to bridge short sections without current. Close coupler mechanism. Length over buffers 21,9 cm. This model can be found in an AC version in the Märklin H0 assortment under item number 39475. One-time series.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 377.40 RRP CHF 444.00

On order, shipped within 10-15 days

15% off the recommended price New
Class 101 W:O:A® Electric Locomotive
Trix 25476 Scale H0
Class 101 W:O:A® Electric Locomotive

Prototype Class 101 express locomotive with an advertising design for Wacken Open Air (W:O:A®). The locomotive looks as it did in 2026. Model With a digital decoder and extensive sound functions. Regulated high-performance motor. 4 axles powered. Traction tires. Triple headlights and 2 red marker lights that change over with the direction of travel will work in conventional operation and can be controlled digitally. Long distance headlights can be controlled separately. Cab lighting can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. When the headlights are off at both ends of the locomotive, the double A light function is on at both ends. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor for bridging short sections without power. Coupler with a close coupler guide mechanism. Length over the buffers 21.9 cm. Highlights Attractive advertising design for Wacken Open Air (W:O:A®). With a buffer capacitor for bridging short sections without power. Motor in the center, all 4 axles powered Cab lighting Coupler with a close coupler guide mechanism DCC, mfx and RailCom capable One-time series One-time series.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 377.40 RRP CHF 444.00

On order, shipped within 10-15 days

15% off the recommended price New
Class 477.0 Steam Locomotive “Papagei” (Parrot)
Trix 25477 Scale H0
Class 477.0 Steam Locomotive “Papagei” (Parrot)

Prototype Class 477.0 heavy steam tank locomotive nicknamed the "Papagei" (Parrot). Version as the museum locomotive 477.043 of the Czech State Railways (ČD), as it was in operating condition until 2021. Model With an mfx digital decoder and extensive light and sound functions. Regulated high-performance motor with a flywheel in the boiler. One axle powered. Three more axles powered via side rods. Traction tires. Locomotive made largely of metal. Factory-installed smoke generator with speed-dependent, dynamic smoke output, can be controlled digitally. Triple headlights on the front and dual headlights on the rear of the locomotive changing over with the direction of travel will work in conventional operation and can be controlled digitally. Upper headlight can be controlled separately. Illuminated locomotive number plate integrated into the upper headlight and functional. Cab and running gear lighting as well as firebox flickering can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Buffer height to NEM standards. Brake hoses, heating hoses, prototype screw couplers and closed pilots are included as separate parts to be plugged in. Minimum radius for operation R1 = 360 mm. Length over the buffers approx. 19.9 cm / 7-13/16". Highlights Completely new tooling Especially delicate metal construction Many separately applied details Factory-installed smoke generator with speed-dependent, dynamic smoke output Cab and running gear lighting can be controlled digitally Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom capable With a buffer capacitor for bridging short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 509.15 RRP CHF 599.00

Pre-order, release expected in Q2 2027

13% off the recommended price
Class 101 Electric Locomotive
Trix 25479 Scale H0
Class 101 Electric Locomotive

Prototype Express locomotive class 101 of the Deutsche Bahn AG (DB AG). Advertising livery "100 Jahre BR 01". The locomotive looks as it did in 2025. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor. 4 axles powered. Traction tyres. The triple headlights change over with the direction of travel and, together with 2 red tail lamps, will work in conventional operation and can be controlled digitally. The long-distance headlights can be controlled separately. The cab lighting can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. When the headlights are turned off at both ends of the locomotive, the double "A" light function works at both ends. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor to bridge short sections without power. Coupler guided in a slot. Length over the buffers 21.9 cm. Highlights Attractive livery to mark 100 years of the class 01 Also running on the prototype. With a buffer capacitor to bridge short sections without power. Centrally mounted motor, drive on all 4 axles Cab lighting Coupler guided in a slot DCC, mfx and RailCom capable

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 396.70 RRP CHF 459.00

On order, shipped within 10-15 days

13% off the recommended price New
Class 1 Steam Locomotive
Trix 25481 Scale H0
Class 1 Steam Locomotive

Prototype Class 1 express steam locomotive of the Belgian State Railways (SNCB/NMBS). Running number 1.002. The locomotive looks as it does as a museum locomotive. Model mfx digital decoder with light and sound functions. Regulated high-performance motor with a flywheel in the boiler. One axle powered, two axles powered via side rods. Traction tires. Locomotive and tender made largely of metal. Factory-installed smoke generator with speed-dependent, dynamic smoke output. Dual headlights on the front can be controlled digitally. In addition, the cab lighting and the fire flickering in the firebox can be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Adjustable coupling with a guide mechanism between the locomotive and tender. Close coupler with a guide mechanism and an NEM pocket on the tender. The locomotive can negotiate curves without restriction on a 437.5 mm radius (radius 2). Brake hoses, prototype screw coupler and signal holders are included. Length over the buffers approx. 28.4 cm Highlights Prototypical changes to the shape of the boiler With a buffer capacitor for bridging short sections without power Dual headlights Factory-installed smoke generator with speed-dependent, dynamic smoke output Cab lighting can be controlled separately digitally Fire flickering in the firebox can be controlled digitally A multitude of applied details Digital decoder with light and sound functions Buffer height to NEM standards Note In 1926, the Belgian State Railways were renamed the National Railway Company of Belgium (SNCB), a name later rendered in Belgium's official German usage as "Nationale Gesellschaft der Belgischen Eisenbahnen".

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 560.95 RRP CHF 649.00

On order, shipped within 10-15 days

13% off the recommended price
Class F 1200 Steam Locomotive
Trix 25490 Scale H0
Class F 1200 Steam Locomotive

Prototype Steam locomotive with a tender, class F 1200, of the Swedish State Railways (SJ). Current operating condition, as the locomotive is at present based in working order in Gävle. Model The locomotive and tender are largely made of metal. The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. One axle powered, two axles powered by coupling rods. Traction tyres. The dual headlights change over with the direction of travel, will work in conventional operation and can be controlled digitally. The lantern on the smoke box door can be controlled separately in digital operation. In addition, the cab lighting and the fire flickering in the firebox can be controlled separately in digital operation. Maintenance-free warm white and red LEDs are used for the lighting. Smoke unit fitted as standard, will work in conventional operation, can be controlled digitally. Adjustable coupler with a guide mechanism between the locomotive and the tender. The tender has a close coupler with a guide mechanism and an NEM pocket. The minimum radius for operation is 360 mm. Various plug-in parts such as steps, brake hoses, piping and an imitation screw coupling are included. Length over the buffers approximately 24.5 cm. Highlights Prototypical tooling changes for the version as the F 1200 Particularly delicate metal construction Smoke generator fitted as standard Cab lighting can be controlled separately in digital operation Fire flickering in the firebox can be controlled digitally The lantern on the smoke box door can be controlled separately in digital operation

  • 2-rail, direct current
  • Sound

Selling price: CHF 586.90 RRP CHF 679.00

On order, shipped within 10-15 days

15% off the recommended price New
Class Be 4/6 Electric Locomotive
Trix 25513 Scale H0
Class Be 4/6 Electric Locomotive

Prototype Class Be 4/6 electric locomotive of the Swiss Federal Railways (SBB). Rebuilt version until retirement. Basic fir green paint scheme with traffic gray running gear. With sleeve buffers. Cab doors on the sides and ends partially welded shut and without walkover plates. With sanding gear, an authorization to proceed signal and Integra Signum magnets. Cooling coils on the sides with 11 vertical brackets. Locomotive running number 12323. The locomotive looks as it did in the early 1970s. Model With a digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted. Both driving wheels and the jackshaft in each of the two powered frames driven via cardan shafts. Traction tires. Articulated chassis that runs smoothly on curves. Triple headlights and 1 white marker light (Swiss light changeover) that change over with the direction of travel will work in conventional operation and can be controlled digitally. For running light, the lighting can be switched to 1 red marker light. Authorization to proceed signal can be controlled separately digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. Double A light function. Additional cab lighting and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details, such as cooling pipes for the transformer oil. Cab and engine room interior details. With sanding gear on the driving wheel groups. Detailed roof equipment with heating resistors, roof wiring, insulators, lightning arrestor coils and roof walkways. Minimum radius for operation 360 mm. Brake hoses, imitation screw couplings and steps are included. Length over the buffers 18.9 cm. Highlights Prototypical changes in shape, such as cab doors on the ends and sides partially welded shut Changed version with 11 cooling coil brackets Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally Additional red authorization to proceed signal can be controlled digitally With a buffer capacitor for bridging short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 475.15 RRP CHF 559.00

On order, shipped within 10-15 days

13% off the recommended price
Class 81 Steam Locomotive
Trix 25539 Scale H0
Class 81 Steam Locomotive

Prototype Steam locomotive of the series 81 (former Prussian G 8.1) with a coal tender of the Belgian State Railways (NMBS/SNCB). Basic moss green and black paint scheme. Locomotive running number 81.340. The locomotive looks as it did in the early/mid 1950s. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. 4 axles powered. Traction tyres. The locomotive and tender are largely constructed of metal. The 72270 smoke unit can be installed in the locomotive. The dual headlights change over with the direction of travel and the retrofittable smoke unit will work in conventional operation and can be controlled digitally. Warm white LEDs are used for the lighting. Fixed close coupler with a guide mechanism between the locomotive and tender. Many separately applied details such as lines and sand pipes. Brake lines and imitation screw couplings are included. Length over the buffers 21 cm. Highlights Digital decoder with extensive operating and sound functions Note A matching coach set can be found in the Märklin H0 assortment under item no. 43054. Various Belgian goods wagons from recent years also go with it, with the item numbers 48832, 46029 or 46984. All of the wagons come with information about the DC wheelsets required.

  • 2-rail, direct current
  • Sound

Selling price: CHF 405.40 RRP CHF 469.00

On order, shipped within 10-15 days

13% off the recommended price New
Type GE ES44AC Diesel Locomotive
Trix 25544 Scale H0
Type GE ES44AC Diesel Locomotive

Prototype General Electric ES44AC heavy diesel electric freight locomotive of the Norfolk Southern (NS). Basic gray/green/black paint scheme of the former Southern Railway. Running number 8099. Current condition as a heritage locomotive. Model With a digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted. Two axles in each truck powered via cardan shafts. Traction tires. Headlights that can be controlled independently of the direction of travel, consisting of four lamps each on the front and rear of the locomotive. Headlights work in conventional operation and can be turned off separately in pairs in digital operation. Cab lighting, number boards, long distance headlights and flashing function of the headlights can be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. With a buffer capacitor. Factory-installed smoke generator with dynamic smoke output, can be controlled digitally. Many separately applied details. For operation with knuckle couplers, the NEM pocket can be fixed with the included clamping pieces. A pilot with a smaller opening for the front, brake hoses and two clamping pieces for the NEM pocket are included. Length over the couplers approx. 27 cm / 10-5/8". Highlights Limited special model with an individually numbered certificate of authenticity Locomotive chassis and body made of metal Variant with additional lamps on the rear walkway Factory-installed smoke generator with dynamic smoke output Many light and sound functions that can be controlled Cab lighting can be controlled digitally Illuminated number boards can be controlled digitally Long distance headlights can be turned on Motor in the center, four axles powered via cardan shafts Operation with knuckle couplers and normal close couplers possible DCC, mfx and RailCom capable With a buffer capacitor for bridging short sections without power One-time series This model is being produced in 2026 in a one-time series and is limited to 300 pieces worldwide. An individually numbered certificate of authenticity is included.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 431.35 RRP CHF 499.00

On order, shipped within 10-15 days

13% off the recommended price New
Class 260 Diesel Locomotive
Trix 25601 Scale H0
Class 260 Diesel Locomotive

Prototype Class 260 diesel switch engine of the German Federal Railroad (DB). Basic ocean blue/ivory paint scheme. Diesel hydraulic drive with a jackshaft. Hoods and cab in the series production version. Reinforced radiator grille with a wide frame. Cab roof in the form used on locomotives up to approx. V 60 390. Cab roof with ventilation flaps. With train radio and Indusi on both sides. First version of the muffler. With a Dofa stove without a coal bin. Running number 260 106-0. The locomotive looks as it did around 1980. Model With a digital decoder and extensive sound functions. Regulated high-performance motor. One axle powered, two axles and the jackshaft powered via side rods. Traction tires. Triple headlights and two red marker lights that change over with the direction of travel will work in conventional operation and can be controlled digitally. Cab lighting can be controlled digitally. Running gear lighting can be controlled digitally. Double A light can be turned on. Maintenance-free LEDs are used for the lighting. With a buffer capacitor. Telex couplers on the front and rear can each be controlled separately digitally. Applied metal grab irons and railings. Length over the buffers approx. 12 cm / 4-3/4". Highlights With Telex couplers on the front and rear that can be controlled separately digitally With coupler slack function Cab lighting Running gear lighting With a buffer capacitor for bridging short sections without power Digital decoder and extensive sound functions. Original Maybach engine operating sound with changeover switch Original sounds such as horn, squealing brakes, compressor, etc. Typical sound when running over a turnout (operating sound)

  • 2-rail, direct current
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

On order, shipped within 10-15 days

13% off the recommended price
Class 151 Electric Locomotive
Trix 25651 Scale H0
Class 151 Electric Locomotive

Prototype Electric locomotive, class 151 of the German Federal Railway (DB). Basic chrome oxide green paint scheme. Running number 151 034-6. The locomotive looks as it did starting in 1974. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Two axles in each bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Cab lighting changing with the direction of travel and engine room lighting can be controlled digitally. In addition, a starting lamp can be controlled digitally depending on the direction of travel. Maintenance-free warm white and red LEDs are used for the lighting. Detailed roof equipment with newly tooled pantographs of the DBS 54 type. The pantographs can be raised and lowered digitally. Many separately applied parts such as imitation wheels, grab rails, sand boxes, UIC sockets and roof lines. Buffer height to NEM standards. Brake lines, screw couplers and various sockets are included as separate plug-in parts. Length over the buffers approximately 22.4 cm. Highlights Completely new tooling in a highly detailed metal version Newly tooled pantographs of the DBS 54 type Pantographs can be raised and lowered digitally Many separately applied details Separately applied imitation wheels Cab and engine room lighting can be controlled digitally Starting lamp can be controlled separately digitally Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom-capable

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 396.70 RRP CHF 459.00

On order, shipped within 10-15 days

13% off the recommended price
Class 151 Electric Locomotive
Trix 25652 Scale H0
Class 151 Electric Locomotive

Prototype Electric locomotive, class 151 of the Deutsche Bahn AG. Basic traffic red paint scheme. Running number 151 035-3. The locomotive looks as it did starting in 2009. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Two axles in each bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Cab lighting changing with the direction of travel and engine room lighting can be controlled digitally. In addition, a starting lamp can be controlled digitally depending on the direction of travel. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Detailed roof equipment with newly tooled single-arm pantographs. The pantographs can be raised and lowered digitally. Many separately applied parts such as imitation wheels, grab rails, sand boxes, UIC sockets and roof lines. Buffer height to NEM standards. Brake lines, screw couplers and various sockets are included as separate plug-in parts. Length over the buffers 22.4 cm. Highlights Variation in the tooling for the correct representation of the Era VI version Newly tooled single-arm pantographs Pantographs can be raised and lowered digitally Many separately applied details Separately applied imitation wheels Cab and engine room lighting can be controlled digitally Starting lamp can be controlled separately digitally Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom-capable With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 405.40 RRP CHF 469.00

On order, shipped within 10-15 days

13% off the recommended price
Class 151 Electric Locomotive
Trix 25655 Scale H0
Class 151 Electric Locomotive

Prototype Electric locomotive, class 151 of the Deutsche Bahn AG. Basic orient red paint scheme. Running number 151 025-4. The locomotive looks as it did starting in 1998. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Two axles in each bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Cab lighting changing with the direction of travel and engine room lighting can be controlled digitally. In addition, a starting lamp can be controlled digitally depending on the direction of travel. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Detailed roof equipment with pantographs of the DBS 54 type. The pantographs can be raised and lowered digitally. Many separately applied parts such as imitation wheels, grab rails, sand boxes, UIC sockets and roof lines. Buffer height to NEM standards. Brake lines, screw couplers and various sockets are included as separate plug-in parts. Length over the buffers 22.4 cm. Highlights Locomotive faded and weathered Detailed pantographs of the DBS 54 type Pantographs can be raised and lowered digitally Many separately applied details Separately applied imitation wheels Cab and engine room lighting can be controlled digitally Starting lamp can be controlled separately digitally Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom-capable With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 405.40 RRP CHF 469.00

On order, shipped within 10-15 days

13% off the recommended price
Class 648.2 Diesel Powered Commuter Rail Car
Trix 25714 Scale H0
Class 648.2 Diesel Powered Commuter Rail Car

Prototype Local service diesel railcar, class 648.2 (LINT 41) of the Deutsche Bahn AG (DB AG). Basic traffic red paint scheme. Version with low-level entrances. Used in the Koblenz service area, with the destination display "RE25 Gießen". Railcar running numbers 648 206-0 and 648 706-9. The railcar looks as it did around 2016. Model The railcar has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel located in the Jacobs bogie. 2 axles powered. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. The headlights at railcar ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Interior lighting fitted as standard. Maintenance-free warm white and red LEDs are used for the headlights and the interior lighting. The destination display is prototypical with yellow LEDs. The headlights, destination display and interior lighting will work in conventional operation and can be controlled digitally. Detailed version of the running gear and the body. Unobstructed view through the windows. Closed diaphragm and guide mechanism on the Jacobs bogie between the vehicle halves. Representation of the centre buffer couplers at the ends. Total length approximately 48.1 cm. Highlights LED interior lighting fitted as standard. With a RailCom-capable DCC/mfx digital decoder Illuminated destination display "RE25 Gießen"

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 414.05 RRP CHF 479.00

On order, shipped within 10-15 days

13% off the recommended price New
Märklin Works Loco in Györ
Trix 25729 Scale H0
Märklin Works Loco in Györ

Prototype Class M28 diesel shunting locomotive as a works locomotive of the Märklin plant in Györ, Hungary. Former shunting locomotive of the Hungarian State Railways (MÁV). Chrome oxide green basic paint scheme. Running number M28.1001. Current visually refurbished condition, Era IV appearance. Model With a 21-pin digital interface. Regulated high-performance drive. Both axles powered, one of them via the coupling rod. Traction tyres. Triple headlights that change over with the direction of travel will work in conventional operation. Lighting with maintenance-free warm white LEDs. Handrails and many other details separately applied. Buffer height to NEM. Length over the buffers approx. 8.5 cm. Highlights Completely new tooling in a highly detailed metal version Many separately applied details Buffer height to NEM

  • 2-rail, direct current

Selling price: CHF 215.20 RRP CHF 249.00

Pre-order, release expected in Q1 2027

13% off the recommended price New
Class EG 524 Electric Locomotive
Trix 25772 Scale H0
Class EG 524 Electric Locomotive

Prototype EG 524 HALLE electric locomotive (later Class E 71.1) of the German State Railroad Company (DRB). Basic brown-green paint scheme. Running number EG 524. The locomotive looks as it did starting in 1921. Model With a digital decoder and extensive sound functions. Regulated high-performance motor with a flywheel, centrally mounted. Both axles in each powered truck driven via cardan shafts. Traction tires. Dual headlights and two red marker lights that change over with the direction of travel will work in conventional operation and can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. In addition, the third headlight as a light for meeting oncoming trains and the cab lighting can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Many separately applied parts such as grab irons and brake hoses. Both powered trucks connected to each other by a side rod. Buffer height to NEM standards. A booklet provides information on the history of the locomotive. Length over the buffers 13.3 cm. Locomotive 1 of 6 in the collector series "History of Electric Locomotives from Era I-VI". Highlights Extensive changes in shape for a correct rendering as an Era I variant Completely new tooling for the pantographs Especially delicate metal version Many separately applied details Cab lighting can be controlled digitally Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom capable With a buffer capacitor for bridging short sections without power With an included booklet on the history of the locomotive

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 431.35 RRP CHF 499.00

Pre-order, release expected in December 2026

13% off the recommended price
Class 186 Electric Locomotive
Trix 25800 Scale H0
Class 186 Electric Locomotive

Prototype Electric locomotive, class 186 of the Deutsche Bahn AG. Basic traffic red paint scheme. Running number 186 339-8. The locomotive looks as it did starting in 2019. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All four axles powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. High beams can be controlled. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. The cab and driver's desk lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Many separately applied parts such as grab rails, sand boxes, UIC sockets and roof lines. Detailed roof equipment with four newly tooled pantographs with different contact strips for use in Germany, France and Belgium. Buffer height to NEM standards. Brake lines, screw couplers, sockets and closed pilots are included as separate plug-in parts. Length over the buffers 21.7 cm. Highlights Completely new tooling in a highly detailed metal version Many separately applied details High beams, cab and driver's desk lighting can be controlled digitally Newly tooled pantographs with different contact strips Shunting and special markers for Belgium and France that can be controlled Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom-capable With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 388.10 RRP CHF 449.00

On order, shipped within 10-15 days

15% off the recommended price
Class 186 Electric Locomotive
Trix 25801 Scale H0
Class 186 Electric Locomotive

Prototype Electric locomotive, class 186 of Akiem SAS, leased to SBB Cargo International. Basic light grey paint scheme with two differently designed side surfaces. Running number 186 904-9 "Ceneri". The locomotive looks as it did starting in 2022. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All four axles powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. High beams can be controlled. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. The cab and driver's desk lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Many separately applied parts such as grab rails, sand boxes, UIC sockets and roof lines. Detailed roof equipment with four newly tooled pantographs with different contact strips for use in Germany, Switzerland and Italy. Buffer height to NEM standards. Brake lines, screw couplers, sockets and closed pilots are included as separate plug-in parts. Length over the buffers 21.7 cm. Highlights Completely new tooling in a highly detailed metal version Many separately applied details High beams, cab and driver's desk lighting can be controlled digitally Newly tooled pantographs with different contact strips Many shunting and special markers for Italy and Switzerland that can be controlled Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom-capable With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 381.65 RRP CHF 449.00

On order, shipped within 10-15 days

13% off the recommended price
Class 186 Electric Locomotive
Trix 25803 Scale H0
Class 186 Electric Locomotive

Prototype Class 186 electric locomotive owned by Railpool GmbH, leased to HSL. Running number 186 181-4. The locomotive looks as it did starting in 2018 with an attractive "HSL - Wir verbinden Europa" advertising design. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The long-distance headlights can be controlled. The headlights at Locomotive Ends 2 and 1 can each be turned off separately, digitally. Double "A" light function. The cab lighting and the control desk lighting can each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for the lighting. It has a buffer capacitor. Many separately applied parts such as handrails, sandboxes, UIC sockets, and roof cables. Detailed roof equipment with four newly tooled pantographs with different contact strips for use in Germany, Belgium, the Netherlands, and Austria. Buffer height per NEM. Brake lines, screw couplers, sockets, and closed pilots are included as separate plug-in parts. Length over the buffers 21.7 cm. Highlights Completely new tooling in a highly detailed metal version Many separately applied details Long-distance headlights, cab lighting, and control desk lighting can be controlled digitally Newly tooled pantographs with different contact strips Controllable shunting and special markers for Belgium and the Netherlands Buffer height per NEM. Digital decoder with extensive operating and sound functions DCC, mfx, and RailCom capable With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 388.10 RRP CHF 449.00

On order, shipped within 10-15 days

13% off the recommended price
Class 186 Electric Locomotive
Trix 25804 Scale H0
Class 186 Electric Locomotive

Prototype Class 186 electric locomotive of the Euro Cargo Rail (ECR). Light grey basic paint scheme. Running number 186 310-9. The locomotive looks as it did starting in 2018. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The long-distance headlights can be controlled. The headlights at Locomotive Ends 2 and 1 can each be turned off separately, digitally. Double "A" light function. The cab lighting and the control desk lighting can each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for the lighting. It has a buffer capacitor. Many separately applied parts such as handrails, sandboxes, UIC sockets, and roof cables. Detailed roof equipment with four newly tooled pantographs with different contact strips for use in Germany, France, and Belgium. Buffer height per NEM. Brake lines, screw couplers, sockets, and closed pilots are included as separate plug-in parts. Length over the buffers 21.7 cm. Highlights Completely new tooling in a highly detailed metal version Many separately applied details Long-distance headlights, cab lighting, and control desk lighting can be controlled digitally Newly tooled pantographs with different contact strips Controllable shunting and special markers for Belgium and France Buffer height per NEM. Digital decoder with extensive operating and sound functions DCC, mfx, and RailCom capable With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 388.10 RRP CHF 449.00

On order, shipped within 10-15 days