Trix H0 and Minitrix
Trix, SBB and European trains in H0 and N
Crocodile, Landilok, Swiss Express Re 4/4 II and Giruno of the SBB, BLS Ae 6/8, plus trains from Germany and across Europe: Trix models the railway in 1:87 on two-rail DC, and in 1:160 with Minitrix.
- 692items in the shop
- 1:87 and 1:160Trix H0 and Minitrix
- Since 1964Minitrix and NEM two-rail

What Trix brings to your layout
- The great Swiss locomotives: Be 6/8 II Crocodile, Ae 8/14 Landilok, Swiss Express Re 4/4 II, Giruno and RAe 4/8 Churchill of the SBB, Ae 6/8 and Re 420 of the BLS.
- Two-rail, direct current: since 1964 Trix has run on two-rail DC to NEM standards. The models run on analogue or DCC layouts and register via mfx in the märklin digital system.
- Minitrix, N scale: launched in 1964, Minitrix covers 1:160: locomotives, coaches, wagons and a complete track system, also with concrete sleepers.
- A Nuremberg house: grown out of the firm J. Hafner, founded in 1838, Trix has been part of the Märklin group since 1997.
The Trix families
For your H0 layout (1:87)
157 itemsLocomotives H0Crocodile, Ae 8/14, Re 4/4 II, Giruno, BLS Ae 6/8 and locomotives from Europe.See the items
43 itemsPassenger coaches H0Swiss Express, add-on coaches for the Giruno and trains from Europe.See the items
23 itemsGoods wagons H0Hupac pocket wagons, container wagons, tank wagons and low-sided wagons.See the items
40 itemsC track H0Straight and curved track, points, double slips and buffer stops.See the itemsFor your N layout (1:160), Minitrix
82 itemsMinitrix locomotivesRe 460, Re 4/4 II, SBB Cargo International Vectron, BLS Re 420.See the items
85 itemsMinitrix passenger coachesSBB Swiss Express, BLS EW III coaches and trains from Europe.See the items
50 itemsMinitrix goods wagonsSBB Cargo coop container wagon, tank wagons, self-unloading wagons.See the items
100 itemsMinitrix trackStraight and curved track, points and crossings, also with concrete sleepers.See the itemsAll Trix items
Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix connecting track with interference suppression. Required as the first connecting track for every circuit (= controller). Removable connection terminals. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 3 on the shelf, shipped within 1-3 days
Prototype The Minitrix re-railing device combines robustness, electrically reliable connections and a prototypical appearance. Model For re-railing derailed vehicles while running. Minitrix re-railing device with a length of 104.2 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance with metal rails
In stock: 3 on the shelf, shipped within 1-3 days
Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as you wish. The ideal track system for newcomers and professionals. Model Minitrix transition track for connecting to the Arnold* track system, with a length of 59.0 mm. The click connection. Set up and taken down in no time. Stable and durable. The Minitrix track is the ideal track for quickly setting up a track formation on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a special stainless alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easily expanding your layout there are also various track extension sets with the item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operating reliability Quick to set up and take down Note *ARNOLD is a trademark of Hornby Hobbies Limited 2021, Great Britain.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Four type EW III standard coaches of the Swiss Federal Railways (SBB/CFF/FFS). One type AD half-luggage coach, 1st class, one type WR restaurant car and two type B high-capacity coaches, 2nd class. Pebble grey/blood orange basic paint scheme of the Swiss Express. Route: Genève-Lausanne-Bern-Zürich HB. Car numbers 1, 13 and 14. Restaurant car without a car number. The coaches look as they did starting in 1975. Model Completely new tooling for the EW III coach family. Multi-coloured interior details. All coaches with LED interior lighting fitted as standard. A buffer capacitor is installed in each coach to bridge over brief interruptions in power. Restaurant car with illuminated table lamps. One high-capacity coach has tail lighting fitted as standard. Equipped with separable, current-conducting close couplers. The interior lighting works in conjunction with the restaurant car; the specified vehicle sequence must be observed for this. There is a digital interface in the restaurant car for fitting a function decoder to control various light functions. Type-specific bogies, roof shapes, side walls and underframes with many applied details. Buffer height according to NEM. Separately applied vents, handrails, control lines and steps on the bogies. Printed destination boards and car numbers. Two plug-in transfer end doors, which were fitted on the prototype for transfer runs, are included with each coach. An imitation of an automatic coupler is also included with the coach with car number 14. All coaches individually packaged in additional outer packaging. The minimum radius for operation is 360 mm. Length over the buffers approx. 113.2 cm. Highlights Completely new tooling for the EW III coach family For the "50 years of the Swiss Express" anniversary. Multi-coloured interior details LED interior lighting fitted as standard with buffer capacitors One coach with built-in tail lighting Restaurant car with illuminated table lamps Restaurant car equipped with a digital interface Separable, current-conducting close couplers Many separately applied details Buffer height according to NEM
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Low-floor transport wagon, type Saadkms, of RAlpin AG (Olten), for the transit traffic of the "Rollende Landstraße". Quartz grey basic paint scheme. The wagon looks as it did starting in 2018. Model Wagon body of metal. Intermediate wagon without buffer beams. Chocks for lorry models and a special coupler for low-floor wagons are included. Length 21.4 cm. AC wheelset E363630. Highlights Wagon body of metal Intermediate wagon to extend the train consist
In stock: 3 on the shelf, shipped within 1-3 days
For fastening track to wood. 0.8 x 10 mm. Contents 50 g/pack.
In stock: 3 on the shelf, shipped within 1-3 days
Precision steel screws with a turned 1.2 mm wood screw thread (7 mm long). 150 pieces/pack.
Content: 150 pc. (CHF 0.09 / 1 pc.)
In stock: 3 on the shelf, shipped within 1-3 days
Chiefly for joining the 14501 flexible tracks to one another and to other tracks. 10 pieces/pack.
In stock: 3 on the shelf, shipped within 1-3 days
Cable for connecting a Trix Systems Mobile Station to the Sx bus of the previous Selectrix system.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Concrete tie track is now standard throughout Europe – and that should also apply to model railroads. N gauge is now getting concrete tie track with an NEM-compliant Code 60 rail profile. The track system can be expanded as desired. The ideal track system for beginners and pros. Model Minitrix crossing with a length of 104.2 mm / 4-1/8". The length corresponds to a 14904 Minitrix straight track. Highlights Minitrix solid profile rails with a rail profile to NEM Code 60 Solid profile rails made of a rust-free special alloy Material and track profile provide reliable contact for current transmission to the wheels
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model Minitrix uncoupler track with a length of 76.3 mm. Locomotives and wagons can be uncoupled by remote control with it. The electromagnetic drive is operated with the Märklin 72710 or 72720 control panel. Highlights Minitrix solid-profile rails with a rail profile to NEM Code 60 Solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model The 15° crossing is designed so that the two intersecting tracks are completely electrically isolated from each other. This crossing can therefore be used as desired, including on loop lines and on intersecting lines with separate circuits. Highlights Minitrix solid-profile rails with a rail profile to NEM Code 60 Solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and experts. Model Minitrix left-hand point 15° with a polarised common crossing. Straight track 112.6 mm. The click connection with the "Click". Set up and taken down in next to no time. Stable and durable. Curve radius = R 4 -15° + 1 x 14903. Stop-point function optional. An electric drive can be retrofitted. The common crossing on these points is made of metal and is constantly supplied with power via a built-in switch, i.e. a permanent power feed whose polarity is automatically reversed with the respective setting of the point. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is the careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For easily expanding the layout there are also various track extension sets with item no. 14311 and 14312. This makes it easy to build up parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operational reliability Quick setting up and taking down Note The common crossing on these points is made of metal and is constantly supplied with power via a built-in switch, i.e. a permanent power feed whose polarity is automatically reversed with the respective setting of the point.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix curved point R3/R4, right-hand, with polarised common crossing. The R3/R4 curved point was developed on the same principles as the R1/R2 curved point, except that it is matched to radii R3 and R4 and that a curve angle of 30° can be allowed for. The track alignment is therefore considerably slimmer. Even so, the space required is still not too great for smaller layouts. Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling Note Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix point 15°. For particularly slim point formations. Straight track 112.6 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curve radius = R4 -15° + 1 x 14903. Stop-point function optional. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired and, with special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Minitrix curved point, right-hand, R1/R2. The R1/R2 curved point is specially matched to the curved tracks of these two radii, i.e. the inner curve of the point corresponds to radius 1, the outer one to radius 2. In both cases, however, it is a curve of special shaping, in order to allow these points to be used as versatilely as possible. Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Minitrix system: combining the Minitrix track systems with one another is possible at any time thanks to transition tracks. Perfect connection: the mechanical and electrical connection between two tracks is not visible from the outside. The line thereby looks as though made from a single length, just as on the prototype. Special fishplates are not needed. Invisible strength: thanks to this stable click connection on the underside of the track, the geometry of the line can be maintained precisely without having to screw the track down. It can thus be assembled at any time and quickly dismantled again. Anywhere! Versatile space: the ballast base (underside of the track) offers plenty of room for the installation of electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance with ballast, sleepers and metal rails Quick assembly and dismantling thanks to the stable click connection, even on carpet Note Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The 15° crossing is designed so that the two crossing tracks are completely isolated from each other electrically. This crossing can therefore be used as desired, including on loop lines and on crossing lines with separate circuits. Model Minitrix straight track with a length of 129.8 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curved track = R 4 -15° + 2 x 14903. Removable drive with mechanism for the point lantern and end shut-off. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Minitrix crossing combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix straight track with a length of 104.2 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curved track = R 1 - 30°. Removable drive with mechanism for the point lantern and end shut-off. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The 15° crossing is designed so that the two crossing tracks are completely isolated from each other electrically. This crossing can therefore be used as desired, including on loop lines and on crossing lines with separate circuits. Model Minitrix crossing with a length of 129.8 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 2 on the shelf, shipped within 1-3 days
Curved points R3/R4. The R3/R4 curved point was developed on the same principles as the R1/R2 curved point, except that it is matched to radii R3 and R4 and a curve angle of 30° can be taken into account. The track layout is therefore considerably slimmer. Nevertheless, the space required is still not too great, even for smaller layouts. Curved points for radii 3 and 4. The point curve corresponds to 30°. Stop-point function optional. An electric drive can be retrofitted.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Grand Comfort coaches. 2 1st class high-capacity coaches of the French State Railways (SNCF). Use: TEE trains in France. Model With a close coupler with a guide mechanism. LED interior lighting can be retrofitted. Total length over the buffers 318 mm. Note The right interior lighting for these coaches: 66616 LED interior lighting.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Grand Comfort coaches. 1 1st class high-capacity coach with a luggage compartment and 1 restaurant car of the French State Railways (SNCF). Use: TEE trains in France. Model With a close coupler with a guide mechanism. LED interior lighting can be retrofitted. Total length over the buffers 318 mm. Note The right interior lighting for these coaches: 66616 LED interior lighting.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Electric locomotive 103 222-6 of RailAdventure GmbH, Munich, as it looked around 2018. Basic paint scheme in agate grey / traffic grey. Wheel arrangement Co'Co', built starting in 1970. Model The body is made of metal-filled plastic for improved pulling power. It has a built-in digital decoder and sound generator for operation with mfx and DCC. Motor with a flywheel, 4 axles powered, traction tyres. The pantographs can be raised and lowered digitally. Headlights and tail lamps change over with the direction of travel, with warm white LEDs, cab lighting, engine room lighting, can be controlled digitally. Close coupler with a guide mechanism. Separately applied handrails. The headlights changing over with the direction of travel will work in conventional operation. Length over the buffers 126 mm. Highlights Technology variant Body made of metal-filled plastic Pantographs can be raised and lowered digitally Digital sound with many functions Lighting with warm white LEDs
- Digital
- Sound
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Class CC 6500 of the French State Railways (SNCF). Wheel arrangement Co'Co', built starting in 1970. Use: This class of locomotive hauled high-quality passenger trains, including the TEE "Aquitaine" from Paris-Austerlitz to Bordeaux-Saint-Jean. Model Built-in digital decoder and sound generator for operation with mfx and DCC. Motor with a flywheel, 4 axles powered, traction tyres. Headlights change over with the direction of travel, with warm white LEDs, can be controlled digitally. With an engraved train name plate on the ends of the locomotive. Train name "Aquitaine". Length over the buffers 125 mm. Highlights Sound
- Digital
- Sound
In stock: 2 on the shelf, shipped within 1-3 days