Exclusive dealer for Switzerland
I-Track, the structure of your layout, ready to assemble
Baseboards, track formations, track beds, helices and CarMotion roads: the plywood system by Hacker Model, assembled without any carpentry. All items are available to order.
- 843items available to order
- 4scales: H0, TT, N and Märklin C
- 6 and 16 cmthe two baseboard heights

What makes I-Track
- A precision system: Hacker Model Production, in Řevničov in the Czech Republic, designs I-Track as the basic structure of your layout: baseboards, frames and track formations cut to fit together.
- On several levels: baseboards 6 and 16 cm high, baseboards with a 26 cm hidden station, Rondela helices and ramps to go from one level to the next.
- For your track: track beds and segments for H0, TT, N and Märklin C track, Rondela helices for Märklin, Roco, Piko, Peco, Tillig, Fleischmann and Minitrix.
- CarMotion roads: road beds and asphalt plates for the Viessmann CarMotion system in H0, up to the complete module with its roads.
- Portable modules: modules on aluminium legs, quick to set up, easy to transport and store, and understructures in planed wood, 66 or 76 cm high.
- To order, with advice: online ordering coming soon. Until then, we advise you, order and deliver, or you collect your order in Rolle.
Catalogue to download
The whole system, layout plans and dimensions, in the manufacturer's documents.
- I-Track catalogue 2024: 40 pages, in German, English and Czech (PDF, 15.5 Mo)
- New for autumn 2026: 4 pages on CarMotion, in German and English (PDF, 3.5 Mo)
The I-Track families
Baseboards and structure
74 itemsBaseboards 6 cmThe base of the layout, rectangular or triangular, loose or already glued.See the items
55 itemsBaseboards 16 cmTaller, to house points, motors and wiring under the track.See the items
14 itemsBaseboards for turntablesCut for Roco, Fleischmann, Trix and Märklin turntables.See the items
24 itemsBaseboards with hidden stationA hidden station under the scenic level, 26 cm high.See the items
17 itemsSide wallsTransparent or solid walls to close baseboards and hidden station.See the items
65 itemsWooden understructuresPlaned wood, 66 or 76 cm high, to stand the baseboards on.See the items
22 itemsModules and control panelsModules on legs, starter boards for table layouts, control panels.See the itemsThe track formation
74 itemsH0 track formation segmentsStraights, curves, bridges and ramps to raise the H0 track.See the items
40 itemsSegments for Märklin CThe same formation, to the geometry of Märklin C track.See the items
52 itemsTT track formation segmentsStraights, curves and bridges to TT track radii.See the items
46 itemsN track formation segmentsStraights, curves and bridges to N track radii.See the items
56 itemsTrack bedsUnder the track, for H0, TT, N and Märklin C, straight and curved.See the items
76 itemsRamps and embankmentsRamps, embankments and track underlays for gentle gradients.See the items
82 itemsRondela helicesHelices to change level in a small space, from N to H0.See the items
90 itemsTemplates, spacers and postsLaying templates, spacers for parallel tracks and posts.See the itemsCarMotion roads
76 itemsCarMotion road bedsThe road elements that guide the CarMotion vehicles.See the items
34 itemsAsphalt road platesThe finished road surface, with or without a zebra crossing.See the items
44 itemsCarMotion segments and modulesMounting posts, segments, holders for the charger, complete modules.See the itemsAll I-Track items
Base plate 100x50x6 cm with special construction for installing the N turntable Fleischmann 9152.
On order
RTI base plate – pre-glued, with special construction for installing the N turntable Fleischmann 9152.
On order
Thanks to its special construction, the 6 cm baseplate is very stable while remaining lightweight. The ribs have cutouts for easy cable installation, and the lower frame has large openings for easy access to all areas of the layout. It is supplied as a kit with illustrated assembly instructions and is glued using standard wood glue.
On order
The I-Track baseplate – glued together – forms the stable and durable base for the model railway. It is very light and stable, its construction guaranteeing strength, rigidity and dimensional stability. The lower part of the baseplate has large openings, so everything is perfectly accessible.
On order
Thanks to its special construction, the 6 cm baseplate is very stable while remaining lightweight. The ribs have cutouts for easy cable installation, and the lower frame has large openings for easy access to all areas of the layout. It is supplied as a kit with illustrated assembly instructions and is glued using standard wood glue.
On order
The I-Track baseplate – glued together – forms the stable and durable base for the model railway. It is very light and stable, its construction guaranteeing strength, rigidity and dimensional stability. The lower part of the baseplate has large openings, so everything is perfectly accessible.
On order
Thanks to its special construction, the 6 cm baseplate is very stable while remaining lightweight. The ribs have cutouts for easy cable installation, and the lower frame has large openings for easy access to all areas of the layout. It is supplied as a kit with illustrated assembly instructions and is glued using standard wood glue.
On order
The glued I-Track base plates form the stable and durable foundation for your model railway. Thanks to the various dimensions of the available elements, any model railway layout can be built according to your personal space requirements. The glued base plates are very light and stable; their construction guarantees strength, rigidity and dimensional stability, and the underside has large openings for perfect access everywhere.
On order
The T6 triangular base plate is designed to fill the corner between the I-Track plates. It can be installed on all I-Track system plates. The plate has a special construction that guarantees rigidity and very low weight. The reinforcement ribs have holes on top that can be used for cable routing. The holes in the bottom plate ensure access to all areas.
On order
The glued I-Track base plates form the stable and durable foundation for your model railway. Thanks to the various dimensions of the available elements, any model railway layout can be built according to your personal space requirements. The glued base plates are very light and stable; their construction guarantees strength, rigidity and dimensional stability, and the underside has large openings for perfect access everywhere.
On order
The T6 triangular base plate is designed to fill the corner between the I-Track plates. It can be installed on all I-Track system plates. The plate has a special construction that guarantees rigidity and very low weight. The reinforcement ribs have holes on top that can be used for cable routing. The holes in the bottom plate ensure access to all areas.
On order
The glued I-Track base plates form the stable and durable foundation for your model railway. Thanks to the various dimensions of the available elements, any model railway layout can be built according to your personal space requirements. The glued base plates are very light and stable; their construction guarantees strength, rigidity and dimensional stability, and the underside has large openings for perfect access everywhere.
On order
The T6 triangle fills the corner between the I-Track base plates and can be installed on any I-Track system plate. Its special construction guarantees rigidity with very low weight. Holes in the reinforcing ribs and in the bottom plate allow cable routing and access to all points.
On order
The I-Track base plates – glued – form the stable and durable foundation for your model railway and, thanks to the various available dimensions, can be combined to suit your personal space requirements. The glued base plates are very light and stable; their construction guarantees strength, rigidity and dimensional stability. The lower part of the base plate has large openings so that everything is perfectly accessible.
On order
The T6 triangle fills the corner between the I-Track base plates and can be installed on any I-Track system plate. Its special construction guarantees rigidity with very low weight. Holes in the reinforcing ribs and in the bottom plate allow cable routing and access to all points.
On order
The I-Track base plates – glued – form the stable and durable foundation for your model railway and, thanks to the various available dimensions, can be combined to suit your personal space requirements. The glued base plates are very light and stable; their construction guarantees strength, rigidity and dimensional stability. The lower part of the base plate has large openings so that everything is perfectly accessible.
On order
The shadow station is the technical background of the model railway: it is used to store trains without having to remove them from the layout, or to add variety to train runs. This base plate with shadow station offers the same possibilities as our normal base plates on the upper level, while the lower level provides space for the shadow station; there is 20 cm of clearance between the levels so that derailed or stuck trains can still be reached. It fits perfectly on our support structures and can be freely combined with other base plates and Rondela helixes.
On order
I-Track base plate with shadow station – assembled and glued. The shadow station plates have a height of 26 cm and are available in lengths of 100, 110 and 120 cm as well as in various widths. This allows a model railway layout to be built in almost any size.
On order
The shadow station is the technical background of the model railway. It is used to park trains without having to remove them from the layout, or it can be used, for example, to vary train journeys more interestingly. Our base plates with shadow station let you realize this technical refinement with ease.
On order
I-Track base plate with shadow station – assembled and glued. The shadow station plates have a height of 26 cm and are available in lengths of 100, 110 and 120 cm as well as in various widths. This allows a model railway layout to be built in almost any size.
On order
The shadow station is the technical background of the model railway. It is used to park trains without having to remove them from the layout, or it can be used, for example, to vary train journeys more interestingly. Our base plates with shadow station let you realize this technical refinement with ease.
On order
I-Track base plate with shadow station – assembled and glued. The shadow station plates have a height of 26 cm and are available in lengths of 100, 110 and 120 cm as well as in various widths. This allows a model railway layout to be built in almost any size.
On order
The shadow station is used to store trains without having to remove them from the layout. The upper level offers the same options as a standard base plate, while the lower level provides space for the shadow station, with 20 cm clearance between the two levels. The base plate is supplied as a kit with illustrated assembly instructions and is glued using standard wood glue.
On order
Already assembled and glued I-Track base plate with shadow station, height 26 cm. Thanks to its special construction, the plate is particularly rigid and lightweight; openings in the braces and the bottom panel allow easy cable routing and convenient access to all areas. The plate is ready to install and is fixed directly to the I-Track base frame made of planed wooden slats.
On order