Exclusive dealer for Switzerland
I-Track, the structure of your layout, ready to assemble
Baseboards, track formations, track beds, helices and CarMotion roads: the plywood system by Hacker Model, assembled without any carpentry. All items are available to order.
- 843items available to order
- 4scales: H0, TT, N and Märklin C
- 6 and 16 cmthe two baseboard heights

What makes I-Track
- A precision system: Hacker Model Production, in Řevničov in the Czech Republic, designs I-Track as the basic structure of your layout: baseboards, frames and track formations cut to fit together.
- On several levels: baseboards 6 and 16 cm high, baseboards with a 26 cm hidden station, Rondela helices and ramps to go from one level to the next.
- For your track: track beds and segments for H0, TT, N and Märklin C track, Rondela helices for Märklin, Roco, Piko, Peco, Tillig, Fleischmann and Minitrix.
- CarMotion roads: road beds and asphalt plates for the Viessmann CarMotion system in H0, up to the complete module with its roads.
- Portable modules: modules on aluminium legs, quick to set up, easy to transport and store, and understructures in planed wood, 66 or 76 cm high.
- To order, with advice: online ordering coming soon. Until then, we advise you, order and deliver, or you collect your order in Rolle.
Catalogue to download
The whole system, layout plans and dimensions, in the manufacturer's documents.
- I-Track catalogue 2024: 40 pages, in German, English and Czech (PDF, 15.5 Mo)
- New for autumn 2026: 4 pages on CarMotion, in German and English (PDF, 3.5 Mo)
The I-Track families
Baseboards and structure
74 itemsBaseboards 6 cmThe base of the layout, rectangular or triangular, loose or already glued.See the items
55 itemsBaseboards 16 cmTaller, to house points, motors and wiring under the track.See the items
14 itemsBaseboards for turntablesCut for Roco, Fleischmann, Trix and Märklin turntables.See the items
24 itemsBaseboards with hidden stationA hidden station under the scenic level, 26 cm high.See the items
17 itemsSide wallsTransparent or solid walls to close baseboards and hidden station.See the items
65 itemsWooden understructuresPlaned wood, 66 or 76 cm high, to stand the baseboards on.See the items
22 itemsModules and control panelsModules on legs, starter boards for table layouts, control panels.See the itemsThe track formation
74 itemsH0 track formation segmentsStraights, curves, bridges and ramps to raise the H0 track.See the items
40 itemsSegments for Märklin CThe same formation, to the geometry of Märklin C track.See the items
52 itemsTT track formation segmentsStraights, curves and bridges to TT track radii.See the items
46 itemsN track formation segmentsStraights, curves and bridges to N track radii.See the items
56 itemsTrack bedsUnder the track, for H0, TT, N and Märklin C, straight and curved.See the items
76 itemsRamps and embankmentsRamps, embankments and track underlays for gentle gradients.See the items
82 itemsRondela helicesHelices to change level in a small space, from N to H0.See the items
90 itemsTemplates, spacers and postsLaying templates, spacers for parallel tracks and posts.See the itemsCarMotion roads
76 itemsCarMotion road bedsThe road elements that guide the CarMotion vehicles.See the items
34 itemsAsphalt road platesThe finished road surface, with or without a zebra crossing.See the items
44 itemsCarMotion segments and modulesMounting posts, segments, holders for the charger, complete modules.See the itemsAll I-Track items
The shadow station is used to store trains without having to remove them from the layout. The upper level offers the same options as a standard base plate, while the lower level provides space for the shadow station, with 20 cm clearance between the two levels. The base plate is supplied as a kit with illustrated assembly instructions and is glued using standard wood glue.
On order
Already assembled and glued I-Track base plate with shadow station, height 26 cm. Thanks to its special construction, the plate is particularly rigid and lightweight; openings in the braces and the bottom panel allow easy cable routing and convenient access to all areas. The plate is ready to install and is fixed directly to the I-Track base frame made of planed wooden slats.
On order
The shadow station is used to store trains without having to remove them from the layout. The upper level offers the same options as a standard base plate, while the lower level provides space for the shadow station, with 20 cm clearance between the two levels. The base plate is supplied as a kit with illustrated assembly instructions and is glued using standard wood glue.
On order
I-Track base plate with shadow station – already assembled and glued, ready for immediate use. The plate is especially rigid and lightweight; openings in the braces and in the bottom plate allow easy cable routing and convenient access to all areas of the layout. It is fixed directly onto the I-Track base frame made of planed wooden battens.
On order
The shadow station is the technical background of the model railway; it is used to store trains without having to remove them from the layout. There is 20 cm of space between the upper level and the shadow station, enough to reach any derailed or stuck trains. The base plate is supplied as a kit with illustrated assembly instructions and is glued using standard wood glue.
On order
I-Track base plate with shadow station – already assembled and glued, ready for immediate use. The plate is especially rigid and lightweight; openings in the braces and in the bottom plate allow easy cable routing and convenient access to all areas of the layout. It is fixed directly onto the I-Track base frame made of planed wooden battens.
On order
The shadow station is the technical background of the model railway; it is used to store trains without having to remove them from the layout. There is 20 cm of space between the upper level and the shadow station, enough to reach any derailed or stuck trains. The base plate is supplied as a kit with illustrated assembly instructions and is glued using standard wood glue.
On order
I-Track base plate with shadow station – already assembled and glued, ready for immediate use. The plate is especially rigid and lightweight; openings in the braces and in the bottom plate allow easy cable routing and convenient access to all areas of the layout. It is fixed directly onto the I-Track base frame made of planed wooden battens.
On order
The shadow station serves as the technical backdrop of the model railway, used to store trains or to add variety to train runs. The upper level of the base plate offers the same possibilities as our standard base plates, while the lower level provides space for the shadow station, with 20 cm of clearance between the two levels. The base plate is supplied as a kit with illustrated assembly instructions, to be glued with standard wood glue.
On order
I-Track base plate with shadow station – already assembled and glued. The plates are 26 cm high and, thanks to their special construction, particularly rigid yet lightweight; openings in the braces and in the bottom plate allow easy cable routing and convenient access. The base plate can be installed immediately and is fixed directly to the I-Track base frame made of planed wooden battens.
On order
The shadow station serves as the technical backdrop of the model railway, used to store trains or to add variety to train runs. The upper level of the base plate offers the same possibilities as our standard base plates, while the lower level provides space for the shadow station, with 20 cm of clearance between the two levels. The base plate is supplied as a kit with illustrated assembly instructions, to be glued with standard wood glue.
On order
I-Track base plate with shadow station – already assembled and glued. The plates are 26 cm high and, thanks to their special construction, particularly rigid yet lightweight; openings in the braces and in the bottom plate allow easy cable routing and convenient access. The base plate can be installed immediately and is fixed directly to the I-Track base frame made of planed wooden battens.
On order
The shadow station serves as the technical backdrop of the model railway, used to store trains or to add variety to train runs. The upper level of the base plate offers the same possibilities as our standard base plates, while the lower level provides space for the shadow station, with 20 cm of clearance between the two levels. The base plate is supplied as a kit with illustrated assembly instructions, to be glued with standard wood glue.
On order
I-Track baseplate with shadow station – assembled and glued. The shadow station panels are 26 cm high and available in lengths of 100, 110 and 120 cm as well as various widths. The baseplate is already fully assembled and glued, ready for immediate installation.
On order
The shadow station is the technical backstage of the model railway: it allows trains to be stored without removing them from the layout, or used to vary train operations. The upper level offers the same possibilities as the standard I-Track baseplates, while the lower level accommodates the shadow station, with 20 cm of clearance between the two levels. The baseplate is supplied as a kit with illustrated assembly instructions and is glued with standard wood glue.
On order
I-Track baseplate with shadow station – assembled and glued. The shadow station panels are 26 cm high and available in lengths of 100, 110 and 120 cm as well as various widths. The baseplate is already fully assembled and glued and is fixed directly onto the I-Track base frame made of planed wooden battens, supplied in the matching size.
On order
The side walls for the I-Track baseplates with shadow station allow it to be enclosed in an attractive way: they protect the interior from dust and unwanted access, provide screening and give the layout a high-quality appearance. The white side walls are made of 3 mm thick wood panel, the transparent ones of 1.5 mm thick plastic; both are fitted with mechanical fasteners and attach easily to the sides of the baseplates. The dimensions of the side walls match those of the baseplates.
On order
The side walls for the I-Track baseplates with shadow station allow it to be enclosed in an attractive way: they protect the interior from dust and unwanted access, provide screening and give the layout a high-quality appearance. The white side walls are made of 3 mm thick wood panel, the transparent ones of 1.5 mm thick plastic; both are fitted with mechanical fasteners and attach easily to the sides of the baseplates. The dimensions of the side walls match those of the baseplates.
On order
These side panels for baseboards with a shadow station give the substructure a high-quality finish and protect the interior from dust and unwanted access. The white panels, made of 3 mm thick wood board, are fitted with mechanical catches that are easy to attach to the sides of the baseboard; their dimensions match those of the baseboard.
On order
These side panels for baseboards with a shadow station give the substructure a high-quality finish and protect the interior from dust and unwanted access. The transparent panels, made of 1.5 mm thick plastic, provide a better view into the shadow station and are fitted with mechanical catches that are easy to attach to the sides of the baseboard; their dimensions match those of the baseboard.
On order
These side panels for baseboards with a shadow station give the substructure a high-quality finish and protect the interior from dust and unwanted access. The white panels, made of 3 mm thick wood board, are fitted with mechanical catches that are easy to attach to the sides of the baseboard; their dimensions match those of the baseboard.
On order
These side panels for baseboards with a shadow station give the substructure a high-quality finish and protect the interior from dust and unwanted access. The transparent panels, made of 1.5 mm thick plastic, provide a better view into the shadow station and are fitted with mechanical catches that are easy to attach to the sides of the baseboard; their dimensions match those of the baseboard.
On order
These side panels for baseboards with a shadow station give the substructure a high-quality finish and protect the interior from dust and unwanted access. The white panels, made of 3 mm thick wood board, are fitted with mechanical catches that are easy to attach to the sides of the baseboard; their dimensions match those of the baseboard.
On order
Side walls for base plates with hidden storage yard, protecting the interior from dust and unwanted access, providing privacy and giving your layout a high quality look. The white side walls are made of 3 mm thick wood panel with mechanical fasteners, the transparent versions of 1.5 mm thick plastic for a better view into the hidden storage yard. The dimensions match those of the respective base plate.
On order