Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Exclusive dealer for Switzerland

I-Track, the structure of your layout, ready to assemble

Baseboards, track formations, track beds, helices and CarMotion roads: the plywood system by Hacker Model, assembled without any carpentry. All items are available to order.

Choose a family See all items

  • 843items available to order
  • 4scales: H0, TT, N and Märklin C
  • 6 and 16 cmthe two baseboard heights
I-Track H0 layout kit, 3.1 × 1.1 m, for Märklin C track

What makes I-Track

  • A precision system: Hacker Model Production, in Řevničov in the Czech Republic, designs I-Track as the basic structure of your layout: baseboards, frames and track formations cut to fit together.
  • On several levels: baseboards 6 and 16 cm high, baseboards with a 26 cm hidden station, Rondela helices and ramps to go from one level to the next.
  • For your track: track beds and segments for H0, TT, N and Märklin C track, Rondela helices for Märklin, Roco, Piko, Peco, Tillig, Fleischmann and Minitrix.
  • CarMotion roads: road beds and asphalt plates for the Viessmann CarMotion system in H0, up to the complete module with its roads.
  • Portable modules: modules on aluminium legs, quick to set up, easy to transport and store, and understructures in planed wood, 66 or 76 cm high.
  • To order, with advice: online ordering coming soon. Until then, we advise you, order and deliver, or you collect your order in Rolle.

Catalogue to download

The whole system, layout plans and dimensions, in the manufacturer's documents.

Our favourites

Starter plate for table layout 110x80x10 cm
I-Track HCT9812Q
Starter plate for table layout 110x80x10 cm

Fully assembled starter plate for the I-Track table layout, allowing track to be laid or roads for CarMotion to be built immediately. After operation, the locomotive and wagons are removed and the plate with its tracks stored in the supplied carton, or it can be left on the table using the supplied spacers and the lid, creating 8 cm of clearance above the layout. Several starter plates can be joined together with M8 screws and wing nuts (HCT8460S4) to form a larger modular layout.

Regular price: CHF 143.60

On order

FREMO / Zababov Module TT 40 x 80 cm ZN
I-Track HCT9870ZN80
FREMO / Zababov Module TT 40 x 80 cm ZN

The FREMO / Zababov modules are designed for building modular railway layouts with various standardised profile shapes. Supplied ready-made, they are built from special plywood, making them light, rigid and resistant to twisting. They are prepared for height-adjustable legs (82–92 cm, item no. HCT9890AL8, or 110–120 cm, item no. HCT9890AL11), are available in lengths of 400, 600, 800, 1000 and 1200 mm, and are joined using an M8 screw set with wing nuts (item no. HCT8460S4).

Regular price: CHF 127.20

On order

Base plate with shadow station 100x30 cm, height 26 cm
I-Track HCT9840F
Base plate with shadow station 100x30 cm, height 26 cm

The shadow station is the technical background of the model railway: it is used to store trains without having to remove them from the layout, or to add variety to train runs. This base plate with shadow station offers the same possibilities as our normal base plates on the upper level, while the lower level provides space for the shadow station; there is 20 cm of clearance between the levels so that derailed or stuck trains can still be reached. It fits perfectly on our support structures and can be freely combined with other base plates and Rondela helixes.

Regular price: CHF 90.95

On order

Rondela Märklin C base circle R5, 540° 1-track
I-Track MC24530R5
Rondela Märklin C base circle R5, 540° 1-track

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 Märklin C, TRIX H0 track radius R 643.6 mm, 1-track, base circle, 6 segments = 1.5 circles, build height: 200 mm, segment width: 80 mm, inner gradient: 3.23%, outer gradient: 2.89%, outer diameter: 1369 mm

Regular price: CHF 152.20

On order

Underframe made of planed wood 120x60 cm, height 76 cm
I-Track HCT9853K
Underframe made of planed wood 120x60 cm, height 76 cm

Underframe made of planed wood, onto which the original Hacker base plates are mounted directly. Thanks to the modular system, combining different underframes and base plates allows you to build almost any layout size, shape and level as if from a single piece. Supplied as a kit with screws and an illustrated assembly manual; thanks to computer-aided production, everything fits together seamlessly.

Regular price: CHF 150.65

On order

CarMotion Module 03 – complete layout with roads
I-Track HCT9812K-03
CarMotion Module 03 – complete layout with roads

The I-Track CarMotion complete solution consists of the module 110×80×10 cm (HCT9812K-03), a set of road bedding elements and crossings (HCT9812K-03SB), a set of asphalt road plates (HCT9812K-03AT) and transparent protective railings (HCT9814R). It also includes a Viessmann magnetic tape 3×1 mm, 10 metres (V8430), the adhesives ModelFix PRO (HC6440) and Herkules (HC6445), 7 mounting rings for turnouts (HCT8408W) and one mounting ring for the inductive charger (HCT8408L).

Regular price: CHF 298.00

On order

The I-Track families

Baseboards and structure

The track formation

CarMotion roads

All I-Track items

Filter products
SA supports for intermediate floor, height 200 mm, 6 pcs
I-Track HCT9560-6SA
SA supports for intermediate floor, height 200 mm, 6 pcs

SA supports, 200 mm high, for installing an additional track level. Their special design provides the strength needed to carry any I-Track system plate, and the perforated reinforcing ribs allow cables to be routed through. They let you quickly create a track crossover or a hidden station, or stack several I-Track plates to form multiple levels.

Regular price: CHF 23.50

On order

Spacer BF for Roco H0 tracks
I-Track HCT95620BF
Spacer BF for Roco H0 tracks

When laying single or multi-track lines, the correct radius, mutual spacing and coaxiality of the ballasted tracks must all be ensured. The I-Track BF spacer elements make sure the tracks are correctly positioned on flat plates. They are designed for use with curved or straight I-Track templates.

Regular price: CHF 8.60

On order

Track template Roco R2/R3, H0, 6 pcs
I-Track HCT95620D
Track template Roco R2/R3, H0, 6 pcs

When laying single or multi-track lines, the correct radius, mutual spacing and coaxiality of the ballasted tracks must all be ensured. The I-Track B spacer elements make sure the tracks are correctly positioned on flat plates. They are designed for use with curved or straight I-Track templates.

Regular price: CHF 15.25

On order

Track template Roco R3/R4 H0, 6 pieces
I-Track HCT95620E
Track template Roco R3/R4 H0, 6 pieces

When laying single or multi-track lines, the correct radius as well as the mutual spacing and coaxiality of the tracks with ballast bed must be ensured. The I-Track spacer elements B ensure that the tracks are correctly positioned on flat plates. They are designed for use with the curved or straight I-Track templates.

Regular price: CHF 15.80

On order

Track template Roco R1/R2 and R4/R5 H0, 6 pieces
I-Track HCT95620G
Track template Roco R1/R2 and R4/R5 H0, 6 pieces

When laying single or multi-track lines, the correct radius as well as the mutual spacing and coaxiality of the tracks with ballast bed must be ensured. The I-Track spacer elements B ensure that the tracks are correctly positioned on flat plates. They are designed for use with the curved or straight I-Track templates.

Regular price: CHF 16.20

On order

Spacer for parallel tracks, 12 pieces
I-Track HCT95620H
Spacer for parallel tracks, 12 pieces

For laying multi-track lines, the H elements ensure the mutual spacing and concentricity of the tracks: they are placed closer together on curves, while larger spacings suffice on straight sections. After screwing or gluing the rails down (e.g. with Hacker CA glue), the H elements are removed again and reused for laying further tracks. Available for H0, TT and N scales, the set contains 12 H elements.

Regular price: CHF 9.25

On order

Track template Roco R2/R3 and R5/R6 H0, 6 pieces
I-Track HCT95620K
Track template Roco R2/R3 and R5/R6 H0, 6 pieces

When laying single or multi-track lines, the correct radius as well as the mutual spacing and coaxiality of the tracks with ballast bed must be ensured. The I-Track spacer elements B ensure that the tracks are correctly positioned on flat plates. They are designed for use with the curved or straight I-Track templates.

Regular price: CHF 17.15

On order

Track template Roco R3/R4 and R6/R7 H0, 6 pieces
I-Track HCT95620M
Track template Roco R3/R4 and R6/R7 H0, 6 pieces

When laying single or multi-track lines, the correct radius as well as the mutual spacing and coaxiality of the tracks with ballast bed must be ensured. The I-Track spacer elements B ensure that the tracks are correctly positioned on flat plates. They are designed for use with the curved or straight I-Track templates.

Regular price: CHF 17.50

On order

Track template Roco R4/R5 and R7/R8 tracks, 6 pieces
I-Track HCT95620N
Track template Roco R4/R5 and R7/R8 tracks, 6 pieces

When laying single or multi track lines, the correct radius as well as the mutual spacing and coaxiality of the tracks with ballast must be ensured. The I-Track spacer elements B ensure that the tracks are correctly positioned on flat plates. They are designed for use with the curved or straight I-Track templates.

Regular price: CHF 19.10

On order

Track template Roco R5/R6 and R8/R9 tracks, H0, 6 pieces
I-Track HCT95620P
Track template Roco R5/R6 and R8/R9 tracks, H0, 6 pieces

When laying single or multi track lines, the correct radius as well as the mutual spacing and coaxiality of the tracks with ballast must be ensured. The I-Track spacer elements B ensure that the tracks are correctly positioned on flat plates. They are designed for use with the curved or straight I-Track templates.

Regular price: CHF 16.90

On order

Spacer for Rondela helix
I-Track HCT95620R
Spacer for Rondela helix

The I-Track R spacer for the Rondela helix (12 pieces) ensures the mutual spacing and concentricity of the tracks when laying multi-track lines. The R segments are slid onto the rails, placed closer together on curves and further apart on straight sections, before the rails are screwed down or glued with Hacker glue (CA). Once removed, the spacer can be reused for laying further tracks; available for H0, TT and N scales.

Regular price: CHF 7.05

On order

Straight track template for Roco tracks, 6 pieces
I-Track HCT95620S
Straight track template for Roco tracks, 6 pieces

When laying single or multi track lines, the coaxiality of the tracks with the ballast must be ensured. The I-Track spacer elements B ensure that the tracks are correctly positioned on flat plates. They are designed for use with the curved or straight I-Track templates.

Regular price: CHF 15.05

On order

Track spacer H 34 mm for parallel tracks, 12 pcs, TT
I-Track HCT95720H34
Track spacer H 34 mm for parallel tracks, 12 pcs, TT

The H spacer (34 mm) for parallel tracks ensures the mutual spacing and concentricity of the tracks when laying multi-track lines. The H segments are slid onto the rails, placed closer together on curves and further apart on straight sections, before the rails are screwed down or glued with Hacker glue (CA). Once removed, the element can be reused for laying further tracks; the set for TT scale contains 12 segments.

Regular price: CHF 8.80

On order

Spacer H 38mm for parallel tracks, 12 pcs TT
I-Track HCT95720H38
Spacer H 38mm for parallel tracks, 12 pcs TT

For laying multi-track routes, the H segments ensure the mutual spacing and concentricity of the tracks: placed closer together on curves and further apart on straight sections. The rails are screwed down or glued to the base with Hacker glue (CA), after which the spacers are removed and reused for laying further tracks. The set contains 12 H segments for TT tracks.

Regular price: CHF 9.00

On order

Spacer H 43mm for parallel tracks, 12 pcs TT
I-Track HCT95720H43
Spacer H 43mm for parallel tracks, 12 pcs TT

For laying multi-track routes, the H segments ensure the mutual spacing and concentricity of the tracks: placed closer together on curves and further apart on straight sections. The rails are screwed down or glued to the base with Hacker glue (CA), after which the spacers are removed and reused for laying further tracks. The set contains 12 H segments for TT tracks.

Regular price: CHF 9.45

On order

Spacer R for Rondela helix TT, 12 pcs
I-Track HCT95720R
Spacer R for Rondela helix TT, 12 pcs

When laying the Rondela TT helix, the R segments ensure the mutual spacing and concentricity of the tracks: placed closer together on curves and further apart on straight sections. The rails are screwed down or glued to the base with Hacker glue (CA), after which the spacers are removed and reused for laying further tracks. The set contains 12 R segments.

Regular price: CHF 7.05

On order

Spacer H 25mm for parallel tracks, 12 pcs
I-Track HCT95920H25
Spacer H 25mm for parallel tracks, 12 pcs

For laying multi-track routes, the H segments ensure the mutual spacing and concentricity of the tracks: placed closer together on curves and further apart on straight sections. The rails are screwed down or glued to the base with Hacker glue (CA), after which the spacers are removed and reused for laying further tracks. The spacings are available for N 33.6 tracks; the set contains 12 H segments.

Regular price: CHF 7.35

On order

Spacer H 28mm for parallel tracks, 12 pcs
I-Track HCT95920H28
Spacer H 28mm for parallel tracks, 12 pcs

For laying multi-track routes, the H segments ensure the mutual spacing and concentricity of the tracks: placed closer together on curves and further apart on straight sections. The rails are screwed down or glued to the base with Hacker glue (CA), after which the spacers are removed and reused for laying further tracks. The spacings are available for N 33.6 tracks; the set contains 12 H segments.

Regular price: CHF 7.35

On order

Spacer H 33.6 mm for parallel tracks, 12 pcs
I-Track HCT95920H33
Spacer H 33.6 mm for parallel tracks, 12 pcs

For laying multi-track lines, the H segments ensure correct spacing and concentricity of the tracks. They are slid onto the rails, placed closer together on curves and further apart on straights, until the tracks are screwed down or fixed with Hacker glue (CA). The set contains 12 pieces for N 33.6 gauge.

Regular price: CHF 7.35

On order

Spacer R for Rondela N helix, 12 pcs
I-Track HCT95920R
Spacer R for Rondela N helix, 12 pcs

For laying multi-track lines, the R segments ensure correct spacing and concentricity of the tracks in the Rondela N helix. They are slid onto the rails, placed closer together on curves and further apart on straights, until the tracks are screwed down or fixed with Hacker glue (CA). The set contains 12 pieces.

Regular price: CHF 7.55

On order

H0 Ramp 1800x60, height 1-66 mm, 3.7%, 1 set
I-Track HCT9600
H0 Ramp 1800x60, height 1-66 mm, 3.7%, 1 set

The ramp is made of a high-quality material that is both stable and flexible, allowing quiet, vibration-free train operation without additional reinforcement. The elements can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or Hacker CA glue. FLEXI versions can also be individually adapted to the track layout; ramps are available with gradients of 2.2%, 3.0%, 3.7% and 4.4%, allowing you to build your entire route quickly without expensive tools or dust.

Regular price: CHF 14.25

On order

Ramp 1800x60 FLEXI, height 1-66 mm, 3.7%, 1 set
I-Track HCT9600F
Ramp 1800x60 FLEXI, height 1-66 mm, 3.7%, 1 set

The ramp is made of a high-quality material that is both stable and flexible, allowing quiet, vibration-free train operation without additional reinforcement. The elements can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or Hacker CA glue. FLEXI versions can also be individually adapted to the track layout; ramps are available with gradients of 2.2%, 3.0%, 3.7% and 4.4%, allowing you to build your entire route quickly without expensive tools or dust.

Regular price: CHF 15.55

On order

H0 Ramp 1800x60, height 1-80 mm, 4.4%, 1 set
I-Track HCT9601
H0 Ramp 1800x60, height 1-80 mm, 4.4%, 1 set

The ramp is made of a high-quality material that is both stable and flexible, allowing quiet, vibration-free train operation without additional reinforcement. The elements can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or Hacker CA glue. FLEXI versions can also be individually adapted to the track layout; ramps are available with gradients of 2.2%, 3.0% and 4.4%, allowing you to build your entire route quickly without expensive tools or dust.

Regular price: CHF 14.65

On order

Ramp FLEXI 1800x60, height 1-80 mm = 4.4%, 1 set
I-Track HCT9601F
Ramp FLEXI 1800x60, height 1-80 mm = 4.4%, 1 set

The ramp is made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. The elements can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0% and 4.4%.

Regular price: CHF 16.05

On order