Exclusive dealer for Switzerland
I-Track, the structure of your layout, ready to assemble
Baseboards, track formations, track beds, helices and CarMotion roads: the plywood system by Hacker Model, assembled without any carpentry. All items are available to order.
- 843items available to order
- 4scales: H0, TT, N and Märklin C
- 6 and 16 cmthe two baseboard heights

What makes I-Track
- A precision system: Hacker Model Production, in Řevničov in the Czech Republic, designs I-Track as the basic structure of your layout: baseboards, frames and track formations cut to fit together.
- On several levels: baseboards 6 and 16 cm high, baseboards with a 26 cm hidden station, Rondela helices and ramps to go from one level to the next.
- For your track: track beds and segments for H0, TT, N and Märklin C track, Rondela helices for Märklin, Roco, Piko, Peco, Tillig, Fleischmann and Minitrix.
- CarMotion roads: road beds and asphalt plates for the Viessmann CarMotion system in H0, up to the complete module with its roads.
- Portable modules: modules on aluminium legs, quick to set up, easy to transport and store, and understructures in planed wood, 66 or 76 cm high.
- To order, with advice: online ordering coming soon. Until then, we advise you, order and deliver, or you collect your order in Rolle.
Catalogue to download
The whole system, layout plans and dimensions, in the manufacturer's documents.
- I-Track catalogue 2024: 40 pages, in German, English and Czech (PDF, 15.5 Mo)
- New for autumn 2026: 4 pages on CarMotion, in German and English (PDF, 3.5 Mo)
The I-Track families
Baseboards and structure
74 itemsBaseboards 6 cmThe base of the layout, rectangular or triangular, loose or already glued.See the items
55 itemsBaseboards 16 cmTaller, to house points, motors and wiring under the track.See the items
14 itemsBaseboards for turntablesCut for Roco, Fleischmann, Trix and Märklin turntables.See the items
24 itemsBaseboards with hidden stationA hidden station under the scenic level, 26 cm high.See the items
17 itemsSide wallsTransparent or solid walls to close baseboards and hidden station.See the items
65 itemsWooden understructuresPlaned wood, 66 or 76 cm high, to stand the baseboards on.See the items
22 itemsModules and control panelsModules on legs, starter boards for table layouts, control panels.See the itemsThe track formation
74 itemsH0 track formation segmentsStraights, curves, bridges and ramps to raise the H0 track.See the items
40 itemsSegments for Märklin CThe same formation, to the geometry of Märklin C track.See the items
52 itemsTT track formation segmentsStraights, curves and bridges to TT track radii.See the items
46 itemsN track formation segmentsStraights, curves and bridges to N track radii.See the items
56 itemsTrack bedsUnder the track, for H0, TT, N and Märklin C, straight and curved.See the items
76 itemsRamps and embankmentsRamps, embankments and track underlays for gentle gradients.See the items
82 itemsRondela helicesHelices to change level in a small space, from N to H0.See the items
90 itemsTemplates, spacers and postsLaying templates, spacers for parallel tracks and posts.See the itemsCarMotion roads
76 itemsCarMotion road bedsThe road elements that guide the CarMotion vehicles.See the items
34 itemsAsphalt road platesThe finished road surface, with or without a zebra crossing.See the items
44 itemsCarMotion segments and modulesMounting posts, segments, holders for the charger, complete modules.See the itemsAll I-Track items
The ramp is made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. The elements can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramp is made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. The elements can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramp is made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. The elements can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramp is made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. The elements can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, very stable yet flexible material that does not need to be reinforced further. They ensure quiet, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire, then glued with hot-melt adhesive or Hacker CA glue.
On order
The ramps are made of a high-quality, very stable yet flexible material that does not need to be reinforced further. They ensure quiet, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire, then glued with hot-melt adhesive or Hacker CA glue. The FLEXI version can also be easily adapted to the course of your track plan.
On order
The ramps are made of a high-quality, very stable yet flexible material that does not need to be reinforced further. They ensure quiet, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire, then glued with hot-melt adhesive or Hacker CA glue.
On order
The ramps are made of a high-quality, very stable yet flexible material that does not need to be reinforced further. They ensure quiet, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire, then glued with hot-melt adhesive or Hacker CA glue. The FLEXI version can also be easily adapted to the course of your track plan.
On order
The ramps are made of a high-quality, very stable yet flexible material that does not need to be reinforced further. They ensure quiet, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire, then glued with hot-melt adhesive or Hacker CA glue.
On order
The ramp is made of a high-quality, sturdy yet flexible material that needs no additional reinforcement and ensures quiet, low-vibration train operation. The FLEXI version can be easily adapted to the individual course of your track plan and cut with a knife or hot wire, then glued with hot-melt adhesive or Hacker CA glue. Ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The embankment is made of a high-quality, sturdy yet flexible material that needs no additional reinforcement and ensures quiet, low-vibration train operation. The elements can be cut with a knife or hot wire and glued with hot-melt adhesive or Hacker CA glue; the FLEXI version easily adapts to any track layout. The segments are available in various widths and heights.
On order
The embankment is made of a high-quality, sturdy yet flexible material that needs no additional reinforcement and ensures quiet, low-vibration train operation. The elements can be cut with a knife or hot wire and glued with hot-melt adhesive or Hacker CA glue; the FLEXI version easily adapts to any track layout. The segments are available in various widths and heights.
On order
The embankment is made of a high-quality, sturdy yet flexible material that needs no additional reinforcement and ensures quiet, low-vibration train operation. The elements can be cut with a knife or hot wire and glued with hot-melt adhesive or Hacker CA glue; the FLEXI version easily adapts to any track layout. The segments are available in various widths and heights.
On order
The embankment is made of a high-quality, sturdy yet flexible material that needs no additional reinforcement and ensures quiet, low-vibration train operation. The elements can be cut with a knife or hot wire and glued with hot-melt adhesive or Hacker CA glue; the FLEXI version easily adapts to any track layout. The segments are available in various widths and heights.
On order
The embankment is made of a high-quality, very stable yet flexible material; the individual elements require no further reinforcement and can be installed without tools. They ensure quiet, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot glue or Hacker CA adhesive. The FLEXI version can also be easily adapted to the individual course of your track plan.
On order
The embankment is made of a high-quality, very stable yet flexible material; the individual elements require no further reinforcement and can be installed without tools. They ensure quiet, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot glue or Hacker CA adhesive. The FLEXI version can also be easily adapted to the individual course of your track plan.
On order
The embankment is made of a high-quality, very stable yet flexible material; the individual elements require no further reinforcement and can be installed without tools. They ensure quiet, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot glue or Hacker CA adhesive. The FLEXI version can also be easily adapted to the individual course of your track plan.
On order
The embankment is made of a high-quality, very stable yet flexible material; the individual elements require no further reinforcement and can be installed without tools. They ensure quiet, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot glue or Hacker CA adhesive. The FLEXI version can also be easily adapted to the individual course of your track plan.
On order
The embankment is made of a high-quality, very stable yet flexible material; the individual elements require no further reinforcement and can be installed without tools. They ensure quiet, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot glue or Hacker CA adhesive. The FLEXI version can also be easily adapted to the individual course of your track plan.
On order
The railway embankment is made of a high-quality, very sturdy yet flexible material that can be installed without additional reinforcement. It ensures smooth, vibration-free train operation and can be cut with a sharp knife or hot wire, then easily glued with hot-melt adhesive or Hacker CA glue. The FLEXI version can be effortlessly adapted to the course of your track plan.
On order
The railway embankment is made of a high-quality, very sturdy yet flexible material that can be installed without additional reinforcement. It ensures smooth, vibration-free train operation and can be cut with a sharp knife or hot wire, then easily glued with hot-melt adhesive or Hacker CA glue. The FLEXI version can be effortlessly adapted to the course of your track plan.
On order
The railway embankment is made of a high-quality, very sturdy yet flexible material that can be installed without additional reinforcement. It ensures smooth, vibration-free train operation and can be cut with a sharp knife or hot wire, then easily glued with hot-melt adhesive or Hacker CA glue. The FLEXI version can be effortlessly adapted to the course of your track plan.
On order
The railway embankment is made of a high-quality, very sturdy yet flexible material that can be installed without additional reinforcement. It ensures smooth, vibration-free train operation and can be cut with a sharp knife or hot wire, then easily glued with hot-melt adhesive or Hacker CA glue. The FLEXI version can be effortlessly adapted to the course of your track plan.
On order
The railway embankment is made of a high-quality, very sturdy yet flexible material that can be installed without additional reinforcement. It ensures smooth, vibration-free train operation and can be cut with a sharp knife or hot wire, then easily glued with hot-melt adhesive or Hacker CA glue. The FLEXI version can be effortlessly adapted to the course of your track plan.
On order