Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Digital electronics and H0 locomotives

ESU, LokSound sound and the SBB Ae 6/6 in H0

LokSound sound decoders, LokPilot decoders, the ECoS command station, the Mobile Control Pro throttle and SwitchPilot accessory decoders: ESU, based in Neu-Ulm, equips your digital layout from locomotive to turnout, and builds sound-fitted H0 locomotives such as the SBB Ae 6/6.

Choose a family See all items

  • 245items in the shop
  • Since 1999LokSound sound decoders
  • 4 protocolsDCC, Motorola, Selectrix and M4
ESU SBB Ae 6/6 11402 'Uri' locomotive in H0, green livery

What ESU brings to your layout

  • The SBB Ae 6/6 in H0: metal body structure and frame, digitally raised and lowered pantographs, original Ae 6/6 sounds on a LokSound 5 decoder and two speakers. A plug-in pickup and a switch for two-rail or three-rail running.
  • LokSound 5, sound since 1999: up to 10 sound channels at once, at least 10 amplified outputs, DCC, Motorola, Selectrix and M4, and automatic registration with the command station via RailComPlus.
  • LokPilot 5 for driving: the same four protocols plus analogue running, at least 10 function outputs of 250 mA, load control adjustable through up to 10 CVs.
  • From control desk to turnout: ECoS command station with a 7-inch touchscreen, the wireless Mobile Control Pro throttle, also for Z21 and CS3, and SwitchPilot 3 for turnouts, colour-light signals and up to eight servos.

Our favourites to equip your layout

LokSound 5 DCC/MM/SX/M4 21MTC with 11x15mm speaker
ESU 58419
LokSound 5 DCC/MM/SX/M4 21MTC with 11x15mm speaker

LokSound 5 DCC/MM/SX/M4 "blank decoder", 21MTC NEM660, with speaker 11x15mm, gauge: 0, H0 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive. LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure. The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker. Operating modes Like all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021. The M4 protocol supports the automatic registration on mfx® compatible central units. The LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts. Sound The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity. The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. Functions We are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. Motor control Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types. LokSound 5 DCC The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Betrieb unter DCC mit RailComPlus®, M4, Motorola® und Selectrix® 32 Funktionen schaltbar (abhängig von der Zentrale) 32-Bit-Prozessor Digitaler Class-„D“-Verstärker mit bis zu 3 W Leistung (LokSound 5 XL: 13 W) Jeder Kanal in 16-Bit-Auflösung und 31250 kHz Samplerate Geräuschspeicher mit 128 Mbit Kapazität Motorregelung mit 50 kHz Taktfrequenz RC-Servos und Susi-Module ansteuerbar 3 neue, individuell einstellbare Bremsregler Zweistufige Schwerlast-Simulation Updatefähig mit ESU-LokProgrammer LokSound 5 Universal-Sound-Decoder für die Spurweiten H0 und Spur 0 Motorstrom 1,5 A Je nach Schnittstelle bis zu 12 verstärkte Funktionsausgänge für Sonderfunktionen (Total: Bis zu 15 Ausgänge) 10 Soundkanäle gleichzeitig abspielbar Ab Werk mit 11x15-mm-„Zuckerwürfel“-Lautsprecher mit anpassbarem Schallkapsel-Set PowerPack-Speicherkondensator optional anschließbar Abmessungen: 30 mm x 15,5 mm, Höhe abhängig von Schnittstelle 8-pin NEM 652 PluxX22 6-pin NEM 651 21MTC 21MTC MKL Click the image for a bigger view. Instruction manual Art.No. Delivery 58420 LokSound 5 DCC "blank decoder", 8-pin NEM652, gauge: 0, H0 Only available at ESU LLC! 58429 LokSound 5 DCC "blank decoder", 21MTC NEM660, gauge: 0, H0 Only available at ESU LLC! 58410 LokSound 5 DCC/MM/SX/M4 "blank decoder", 8-pin NEM652, with Speaker 11x15mm, gauge: 0, H0 58412 LokSound 5 DCC/MM/SX/M4 "blank decoder", PluX22, with speaker 11x15mm, gauge: 0, H0 58419 LokSound 5 DCC/MM/SX/M4 "blank decoder", 21MTC NEM660, with speaker 11x15mm, gauge: 0, H0 58449 LokSound 5 DCC/MM/SX/M4 "blank decoder", 21MTC "MKL", with speaker 11x15mm, gauge: 0, H0

Regular price: CHF 111.00

In stock: 3 on the shelf, shipped within 1-3 days

LokSound 5 micro DCC/MM/SX/M4
ESU 58813
LokSound 5 micro DCC/MM/SX/M4

LokSound 5 micro DCC/MM/SX/M4 "blank decoder", single wires, with Speaker 11x15mm, gauge: N, TT, H0 The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types. The decoder is supplied with an 11mm x 15mm sugar cube speaker as well as a sound enclosure set. The LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker. Operating modes The LokSound 5 micro is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021. The M4 protocol supports the automatic registration on mfx® compatible central units. The LokSound decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. The LokSound 5 micro decoder is also suitable for analogue DC and AC (!) layouts. Sound The LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity. The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. Functions Despite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. Motor control Motor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 0.75 A) for the intended applications. LokSound 5 micro DCC The LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Betrieb unter DCC mit RailComPlus®, M4, Motorola® und Selectrix® 32 Funktionen schaltbar (abhängig von der Zentrale) 32-Bit-Prozessor Digitaler Class-„D“-Verstärker mit bis zu 3 W Leistung (LokSound 5 XL: 13 W) Jeder Kanal in 16-Bit-Auflösung und 31250 kHz Samplerate Geräuschspeicher mit 128 Mbit Kapazität Motorregelung mit 50 kHz Taktfrequenz RC-Servos und Susi-Module ansteuerbar 3 neue, individuell einstellbare Bremsregler Zweistufige Schwerlast-Simulation Updatefähig mit ESU-LokProgrammer LokSound 5 micro Motorstrom 0,75 A Je nach Schnittstelle bis zu 6 verstärkte Funktionsausgänge für Sonderfunktionen (total: 9 Ausgänge) Next18-Schnittstelle serienmäßig, Adapterkabel für andere Schnittstellen liegen bei Ab Werk mit 11x15-mm-„Zuckerwürfel“-Lautsprecher mit anpassbarem Schallkapsel-Set RC-Servos und Susi-Module ansteuerbar PowerPack-Speicherkondensator optional anschließbar Abmessungen: 21 mm x 10 mm 8-pin NEM 652 PluxX16 6-pin NEM 651 Next18 Click the image for a bigger view. Instruction manual Art.No. Delivery 58820 LokSound 5 micro DCC "blank decoder", 8-pin NEM652, gauge: N, TT, H0 Only available at ESU LLC! 58823 LokSound 5 micro DCC "blank decoder", single wires, gauge: N, TT, H0 Only available at ESU LLC! 58828 LokSound 5 micro DCC "blank decoder", Next18, gauge: N, TT, H0 Only available at ESU LLC! 58810 LokSound 5 micro DCC/MM/SX/M4 "blank decoder", 8-pin NEM652, with Speaker 11x15mm, gauge: N, TT, H0 58813 LokSound 5 micro DCC/MM/SX/M4 "blank decoder", single wires, with Speaker 11x15mm, gauge: N, TT, H0 58816 LokSound 5 micro DCC/MM/SX/M4 "blank decoder", 6-pin NEM651, with Speaker 11x15mm, gauge: N, TT, H0 58818 LokSound 5 micro DCC/MM/SX/M4 "blank decoder", Next18, with Speaker 11x15mm, gauge: N, TT, H0 51993 Wire harness, 18-pin Next18 socket to open wires, 88mm, with heat shrink tube 51994 Adapter board, 18-pin Next-18 socket to NEM651 6-pin, Flex, 88mm, with heat shrink tube 51995 Adapter board, 18-pin Next-18 socket to NEM652 8-pin, Flex, 88mm, with heat shrink tube 51996 Adapter board, 18-pin Next-18 socket to Plux16

Regular price: CHF 122.00

In stock: 4 on the shelf, shipped within 1-3 days

LokPilot 5 DCC/MM/SX/M4 PLUX22 NEM658
ESU 59612
LokPilot 5 DCC/MM/SX/M4 PLUX22 NEM658

LokPilot 5 DCC/MM/SX/M4, PLUX22 NEM658, gauge H0 ,0 The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. LokPilot 5 decoders are offered with all common interfaces. Modes The LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255. Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are offered here. The LokPilot 5 decoder recognizes the Märklin® braking distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. The LokPilot 5 decoder can be used on analog DC and AC railways.The decoder switches between the operating modes fully automatically "on-the-fly". Usually nothing needs to be set. Features We know that you want your locomotives to be as realistic as possible. Therefore, we packed the LokPilot 5 with function outputs. Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings. Motor control The engine control of the LokPilot 5 has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function enables the decoder to be automatically calibrated to the motor. With up to 1.5A motor current, the LokPilot 5 decoder provides enough juice even for older motors. Operational safety On request, a PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections. Protection Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible. Possible under Selectrix® operation. Programming must be carried out in DCC mode. Programming with "pure" Selectrix® devices is not possible. Click the image for a bigger view. Betriebsarten: NMRA/DCC mit 14, 28 und 128 Fahrstufen, DCC RailCom® DCC 2-stellige und 4-stellige Adressen (kurze und lange Adressen) Digital Motorola® (alt und neu), bis zu 255 Adressen im Motorola®-Betrieb Selectrix® Fahrbetrieb M4-Betrieb (Automatische Anmeldung an mfx®-kompatiblen Zentralen) Analog Gleichspannung (abschaltbar). Analog Wechselspannung (abschaltbar) Automatische Erkennung der Betriebsart und DCC-Fahrstufeneinstellung Unterstützung der Lenz® LG100, Märklin®, Roco® Bremsstrecken und ZIMO® HLU Befehle Unterstützung für ABC Bremsmodus und ABC-Pendelzugstrecke Falschfahrbit / Speicherung der Betriebszustände Intelligenter Programmiermodus mit Märklin® 6021® Rangiergang und Anfahr- und Bremsverzögerung per Taste schaltbar Fahrtreglerteil: 2,0 A Dauerbelastbarkeit Anschluss von Gleichstrom- Glockenanker- und Wechselstrommotoren (mit Permanentmagnet) Geräuschlose, motorschonende Ansteuerung mit bis zu 50 kHz Taktfrequenz Motorausgang gegen Überlast geschützt. Lastregelung der 5. Generation (abschaltbar) Funktionsausgänge: 10 verstärkte Funktionsausgänge Version mit 21MTC-Schnittstelle zusätzlich 2 Logiklevelausgänge sowie 2 weitere Logiklevelausgänge statt SUSI Version mit PluX22-Schnittstelle 2 Logiklevelausgänge statt SUSI 250mA Belastbarkeit pro verstärktem Ausgang Summenstrom aller Funktionsausgänge ca. 500mA. Ausgänge kurzschlussfest Belegung der Funktionsausgänge frei wählbar (function mapping) Dimensionen: 21,4mm x 15,5mm x 4,5mm Instruction manual Art.No. Delivery 59610 LokPilot 5 DCC/MM/SX/M4, 8-pin NEM652, gauge H0 ,0 59612 LokPilot 5 DCC/MM/SX/M4, PLUX22 NEM658, gauge H0 ,0 59616 LokPilot 5 DCC/MM/SX/M4, 6-pin NEM651, gauge H0 ,0 59619 LokPilot 5 DCC/MM/SX/M4, 21MTC NEM660, gauge H0 ,0 59649 LokPilot 5 DCC/MM/SX/M4, 21MTC MKL, gauge H0 ,0

Regular price: CHF 39.00

In stock: 3 on the shelf, shipped within 1-3 days

LokPilot 5 DCC/MM/SX/M4 21-pin NEM660
ESU 59619
LokPilot 5 DCC/MM/SX/M4 21-pin NEM660

LokPilot 5 DCC/MM/SX/M4, 21MTC NEM660, gauge H0 ,0 The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. LokPilot 5 decoders are offered with all common interfaces. Modes The LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255. Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are offered here. The LokPilot 5 decoder recognizes the Märklin® braking distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. The LokPilot 5 decoder can be used on analog DC and AC railways.The decoder switches between the operating modes fully automatically "on-the-fly". Usually nothing needs to be set. Features We know that you want your locomotives to be as realistic as possible. Therefore, we packed the LokPilot 5 with function outputs. Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings. Motor control The engine control of the LokPilot 5 has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function enables the decoder to be automatically calibrated to the motor. With up to 1.5A motor current, the LokPilot 5 decoder provides enough juice even for older motors. Operational safety On request, a PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections. Protection Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible. Possible under Selectrix® operation. Programming must be carried out in DCC mode. Programming with "pure" Selectrix® devices is not possible. Click the image for a bigger view. Betriebsarten: NMRA/DCC mit 14, 28 und 128 Fahrstufen, DCC RailCom® DCC 2-stellige und 4-stellige Adressen (kurze und lange Adressen) Digital Motorola® (alt und neu), bis zu 255 Adressen im Motorola®-Betrieb Selectrix® Fahrbetrieb M4-Betrieb (Automatische Anmeldung an mfx®-kompatiblen Zentralen) Analog Gleichspannung (abschaltbar). Analog Wechselspannung (abschaltbar) Automatische Erkennung der Betriebsart und DCC-Fahrstufeneinstellung Unterstützung der Lenz® LG100, Märklin®, Roco® Bremsstrecken und ZIMO® HLU Befehle Unterstützung für ABC Bremsmodus und ABC-Pendelzugstrecke Falschfahrbit / Speicherung der Betriebszustände Intelligenter Programmiermodus mit Märklin® 6021® Rangiergang und Anfahr- und Bremsverzögerung per Taste schaltbar Fahrtreglerteil: 2,0 A Dauerbelastbarkeit Anschluss von Gleichstrom- Glockenanker- und Wechselstrommotoren (mit Permanentmagnet) Geräuschlose, motorschonende Ansteuerung mit bis zu 50 kHz Taktfrequenz Motorausgang gegen Überlast geschützt. Lastregelung der 5. Generation (abschaltbar) Funktionsausgänge: 10 verstärkte Funktionsausgänge Version mit 21MTC-Schnittstelle zusätzlich 2 Logiklevelausgänge sowie 2 weitere Logiklevelausgänge statt SUSI Version mit PluX22-Schnittstelle 2 Logiklevelausgänge statt SUSI 250mA Belastbarkeit pro verstärktem Ausgang Summenstrom aller Funktionsausgänge ca. 500mA. Ausgänge kurzschlussfest Belegung der Funktionsausgänge frei wählbar (function mapping) Dimensionen: 21,4mm x 15,5mm x 4,5mm Instruction manual Art.No. Delivery 59610 LokPilot 5 DCC/MM/SX/M4, 8-pin NEM652, gauge H0 ,0 59612 LokPilot 5 DCC/MM/SX/M4, PLUX22 NEM658, gauge H0 ,0 59616 LokPilot 5 DCC/MM/SX/M4, 6-pin NEM651, gauge H0 ,0 59619 LokPilot 5 DCC/MM/SX/M4, 21MTC NEM660, gauge H0 ,0 59649 LokPilot 5 DCC/MM/SX/M4, 21MTC MKL, gauge H0 ,0

Regular price: CHF 39.90

In stock: 3 on the shelf, shipped within 1-3 days

SwitchPilot 3 Servo 8-channel DCC/MM OLED RC-Feedback
ESU 51832
SwitchPilot 3 Servo 8-channel DCC/MM OLED RC-Feedback

SwitchPilot 3 Servo, 8x servo decoder, DCC/MM, OLED, with RC-Feedback, updatable SwitchPilot 3 servo decoders are optimized for stationary use on your system and can control up to eight RC servo drives. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Servo has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 servo is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled central. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 servo can be supplied directly from the digital system or an external DC or AC voltage source. The SwitchPilot 3 servo has eight outputs for the control of RC servo drives. In doing so, it can control these drives so precisely that, in addition to switching switches, any other slow movement sequences can be controlled. The SwitchPilot 3 servo has a built-in power-on pulse suppression to eliminate or reduce the system-related "twitching" of RC servos when applying the supply voltage. Furthermore, the power supply to the servo can be interrupted to prevent a "hum" of some inexpensive servos. Each of the eight servos can be operated either in "digital mode" or in the "proportional mode" introduced for the first time with the SwitchPilot 3 servo: In digital mode, the servo can start two end positions "A" and "B", depending on the switching position on the control panel. The position of the two end positions as well as the speed at which thethe servo moves in the desired direction, can be individually set on the SwitchPilot 3 servo. The digital mode is perfect for switching switches or signals that should always remain in a fixed position. In proportional mode, the servo can move and stop in any position within the end positions "A" and B. The servo only runs as long as the control panel sends a command. If you release the button, the servo stops. In this way, a servo can be stopped in any desired position. The servo speed can be adjusted individually. The proportional mode is ideal for (water) cranes or engine shed gates or any other application, for which intermediate positions are also required. For each servo, in addition to the end positions and the rotational speeds, it can be determined whether it should rock up when reaching the final position. Furthermore, the generation of the servo pulse can be influenced to adapt to the different RC servos on the market or the power supply of each servo can be switched off individually. In this way, cheap so-called so-called Analog servos as well as modern digital servos (with microcontroller) optimally controlled. Analogue Operation The SwitchPilot 3 servo can be used as a special feature without a digital control panel: On request, up to 16 buttons can be connected for direct switching of the servos. Set The SwitchPilot 3 servo can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. "Programming" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 servo are protected against overload. We want you to enjoy your decoder for as long as possible.

Selling price: CHF 61.65 RRP CHF 64.90

In stock: 1 on the shelf, shipped within 1-3 days

Servo drive with metal gear mechanism, microcontroller, 30 cm cable harness, fixing material
ESU 51805
Servo drive with metal gear mechanism, microcontroller, 30 cm cable harness, fixing material

Servo Motor, precision mini-servo, micro-controlled with metal gearing, incl. mounting kit ESU proudly presents a further, newly-developed servo motor for all ambitious model railway fans. The „Precision Servo Motor - Metal“ is preferred by all model railroaders who look for a powerful servo with metal gearing. Thanks to its metal gearing the servo is able to lift nearly twice the load (1.8 kg) of its plastic gearing brother. Moreover, the „Precision Servo Motor - Metal“ is appropriate for all situations in which splicing and beating claim high mechanical requirements from the servo and where the sound development does not play such an important role. With the same measurements as the Precision Servo Motor, the metal gearing is also equipped with the new, micro-processed control electronics for a precise, sensitive heading to the required position. Therefore the impuls suppression makes sure that there won´t be any tremors on the layout when you switch it on. The 30cm cables makes easy wiring possible. Also, the „Precision Servo Motor - Metal“ comes with innovative and well-proven accessories such as a servo holder and controlling wires. Art.No. 51805 Servo Motor, precision mini-servo, micro-controlled with metal gearing, incl. mounting kit

Regular price: CHF 23.90

In stock: 5 on the shelf, shipped within 1-3 days

LokSound 5 DCC/MM/SX/M421MTC MKL0 H0
ESU 58449
LokSound 5 DCC/MM/SX/M421MTC MKL0 H0

LokSound 5 DCC/MM/SX/M4 "blank decoder", 21MTC "MKL", with speaker 11x15mm, gauge: 0, H0 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive. LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure. The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker. Operating modes Like all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021. The M4 protocol supports the automatic registration on mfx® compatible central units. The LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts. Sound The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity. The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. Functions We are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. Motor control Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types. LokSound 5 DCC The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Betrieb unter DCC mit RailComPlus®, M4, Motorola® und Selectrix® 32 Funktionen schaltbar (abhängig von der Zentrale) 32-Bit-Prozessor Digitaler Class-„D“-Verstärker mit bis zu 3 W Leistung (LokSound 5 XL: 13 W) Jeder Kanal in 16-Bit-Auflösung und 31250 kHz Samplerate Geräuschspeicher mit 128 Mbit Kapazität Motorregelung mit 50 kHz Taktfrequenz RC-Servos und Susi-Module ansteuerbar 3 neue, individuell einstellbare Bremsregler Zweistufige Schwerlast-Simulation Updatefähig mit ESU-LokProgrammer LokSound 5 Universal-Sound-Decoder für die Spurweiten H0 und Spur 0 Motorstrom 1,5 A Je nach Schnittstelle bis zu 12 verstärkte Funktionsausgänge für Sonderfunktionen (Total: Bis zu 15 Ausgänge) 10 Soundkanäle gleichzeitig abspielbar Ab Werk mit 11x15-mm-„Zuckerwürfel“-Lautsprecher mit anpassbarem Schallkapsel-Set PowerPack-Speicherkondensator optional anschließbar Abmessungen: 30 mm x 15,5 mm, Höhe abhängig von Schnittstelle 8-pin NEM 652 PluxX22 6-pin NEM 651 21MTC 21MTC MKL Click the image for a bigger view. Instruction manual Art.No. Delivery 58420 LokSound 5 DCC "blank decoder", 8-pin NEM652, gauge: 0, H0 Only available at ESU LLC! 58429 LokSound 5 DCC "blank decoder", 21MTC NEM660, gauge: 0, H0 Only available at ESU LLC! 58410 LokSound 5 DCC/MM/SX/M4 "blank decoder", 8-pin NEM652, with Speaker 11x15mm, gauge: 0, H0 58412 LokSound 5 DCC/MM/SX/M4 "blank decoder", PluX22, with speaker 11x15mm, gauge: 0, H0 58419 LokSound 5 DCC/MM/SX/M4 "blank decoder", 21MTC NEM660, with speaker 11x15mm, gauge: 0, H0 58449 LokSound 5 DCC/MM/SX/M4 "blank decoder", 21MTC "MKL", with speaker 11x15mm, gauge: 0, H0

Regular price: CHF 111.00

In stock: 2 on the shelf, shipped within 1-3 days

Interior lighting set with decoder, entry and tail lights, 264mm, splitable, PowerPack option 13
ESU 50718
Interior lighting set with decoder, entry and tail lights, 264mm, splitable, PowerPack option 13

Interiour lighting set with decoder, Entry+Red marker light, 264mm, divisible, PowerPack Option, 13 LED, warm white With the digital LED interior lights from ESU, you can retrofit your N, TT or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit the desired location. The digital interior lights are 264mm long, 9mm slim and each fitted with 13 (!) LEDs. In addition to a version with warm white LEDs (50718), there is also a board with yellow LEDs (50719) so that the light color always matches your existing wagons. Features The digital interior lighting consists of a 74 mm long base section, on which a digital decoder and four LEDs are mounted, and eight adjoining sections, each equipped with one LED spaced 24mm apart. The additional sections can be cut off to customize the length to suit the wagon. Furthermore, two additional 4.5mm wide, detachable LED sections are provided on the far left and right sides to illuminate the entry area. The brightness of the LEDs can be set either using a potentiometer or via software CV and remains constant regardless of the track voltage thanks to the built-in constant voltage supply. A built-in buffer capacitor bridges small current interruptions ex works. To completely prevent flickering even with poor power pickup, a special, very compact PowerPack supercapacitor (ESU item no. 50710) can be connected directly upon request. This can power the LEDs for a few seconds. The digital interior lighting comes with a soldered red tail light. Operating modes The decoder, based on the LokPilot 5 Basic and adapted to the intended use, supports  the DCC and Märklin® Motorola® protocols. It can handle 2- and 4-digit addresses and can trigger functions up to F31. Thanks to RailComPlus®, the decoders register fully automatically with a suitable DCC command station. It supports all DCC programming modes, and thanks to RailCom®, the CV values ​​can be read on the main track with suitable command stations. Auxiliary registers are available for command stations that can only program CVs 1-255. Alternatively, the decoder can be read on the programming track without an additional load resistor. The digital interior lighting can also be used on analog AC and DC systems. In both operating modes, the direction of travel is correctly detected and the tail light is switched accordingly. Functions The 13 built-in LEDs can be individually controlled in a total of seven groups: The two entrance LEDs can each be switched separately. The tail light can also be switched separately depending on the direction of travel. Furthermore, there is an amplified output and two outputs for connecting additional LEDs (e.g., for headlights on Pilot cars or toilet lighting), which can be wired individually. Various prototypical lighting effects such as soft dimming, neon tube effects, defective neon tubes, battery lighting, and much more ensure a realistic result. The ESU V5 Function Mapping allows the individual assignment of all LED groups to the desired function keys. Robust You can rely on the experience and quality of a renowned brand manufacturer, even when it comes to digital interior lighting.

Selling price: CHF 31.90 RRP CHF 33.90

In stock: 2 on the shelf, shipped within 1-3 days

All ESU items

Filter products
10% off the recommended price
DB steam locomotive Class 80, running number 031, black, Era III, 1960, DCS/ACS
ESU 31650 Scale H0
DB steam locomotive Class 80, running number 031, black, Era III, 1960, DCS/ACS

80 031 DB, black, DC/AC In the Deutsche Reichsbahn-Gesellschaft's standard locomotive programme for steam locomotives, there was also a three-axle class for heavy shunting duties. For this class, the DRG stipulated a maximum axle load of 17.5 t, which was only moderately exceeded at 18.1 t during acceptance, thanks to several tricks. This made the best possible use of the track facilities at marshalling yards and industrial areas close to major cities. In contrast to the numerous locomotives still dating from the era of the state railways, which were mostly larger, the class 80 was more powerful and at the same time more economical. On account of its imposing boiler, the three-coupled locomotive earned the nickname "Bulli". Despite the undeniable advantages of the modern design, the DRG, owing to the difficult economic situation, limited production to the 39 examples procured in 1928 and 1929. The locomotives bustled about the tracks at a maximum permitted speed of 45 km/h, mostly at passenger stations. By 1966, the reliable locomotives had disappeared from the marshalling yards of both German state railways. The V60 in both variants delivered similar haulage performance but was even more versatile in use owing to its higher maximum speed. At not even 40 years old, however, the class 80 locomotives had not yet been consigned to the scrapheap. Both state railways used the Bullis in repair works or sold them to industrial concerns or coal mines, which gratefully made use of the proven locomotives. A handful of class 80s, for example, toiled away in coal mines in the Ruhr district. There they were even used on works internal passenger trains. The last operational Bullis were 80 036 and 80 039, transferred to the Veluwsche Stoomtrein Maatschappij (VSM) in the Netherlands by the heritage railway Museumseisenbahn Hamm. A special status belongs to 80 009 of the Deutsche Reichsbahn, which was the only state railway locomotive to be sold to a private individual during the GDR era. The engine driver Klaus Hollenbach acquired the locomotive with great difficulty in 1981, transferred it under its own power, and built an engine shed and a short "private siding" on his own property for his 80 009, which was lifted onto the tracks in 1982 using two mobile cranes.

  • 2-rail, direct current
  • 3-rail, alternating current
  • Sound

Selling price: CHF 437.00 RRP CHF 490.00

On order, lead time to be confirmed

10% off the recommended price
DB diesel locomotive 260 610 in ocean blue-beige livery, Era IV, 1980, DCS/ACS
ESU 31741 Scale H0
DB diesel locomotive 260 610 in ocean blue-beige livery, Era IV, 1980, DCS/ACS

Diesel loco, 260 610 DB, blue-cream, Era IV, prototype around 1980, Sound+Smoke, el. Coupler, DC/AC (replaces Art.-No: 31411) Starting in 1956 the DB (Deutsche Bundesbahn) commenced the procurement of the three-axle shunting locomotive class V60 in order to modernize shunting operations. It was decided to employ a drive system with coupling rods and a jack shaft. Its maximum speed of 60 km/h in mainline gear matched the then common speed of long distance freight trains. The coal-fired oven (so called Dofa heater) only served for keeping the engine of a parked V60 at a suitable temperature. As from the 1990-ies the DB replaced these heaters with externally powered electric heaters. The DB actually differentiated the serial locomotives between light weight and heavy types. Externally one could not detect any difference. The heavy type with 54 t is constructed with a stronger frame compared to the lighter version with 48 t. With the advent of the computer suitable numbering system in 1968, the DB assigned the lighter version as class 260 and the heavy type as class 261. In 1987 the engine was reclassified as a minor locomotive (Kleinlokomotive - literally: small locomotive or locomotors). Class 260 became class 360 and the 261s became 361s. Its categorisation as a Kleinlok saved staff costs, because the railway no longer had to employ "engine drivers", but only "Kleinlok operators", i.e.: specially trained shunting personnel. The locomotives equipped with automatic coupler (AK) and radio control were reclassified as class 364 (light weight version) and class 365 (heavy type).  Class 362 and 363 were only designated in 1992 and denominate locomotives equipped with the Caterpillar engine 3412 DI-TA, which was installed  instead of the original Maybach GTO 6 / GTO 6A. The ESU model of the DB class V60 is completely new! Chassis, body, motor, gearbox, centre pick-up including its holding fixture, smoke generator, lighting, digital coupler, speaker as well as all details have been developed from scratch. The headlight inserts have vertical engravings in order to match the appearance of DB standard lanterns. The conversion from AC (as delivered) to DC mode is accomplished by pulling off the centre pick-up and by activating a small sliding switch right in front of the forward axle. The digitally remote controlled electromagnetic coupler (shunting coupler) is inserted into the standard coupler shaft as per NEM 362. The mounting height of the coupler can be adjusted in two steps. If necessary it can be removed and replaced by another (non-digital) coupler without soldering. The newly designed smoke generator supplies a larger amount of exhaust fumes. Of course, the LokSound 5 decoder is completely new. Smooth running characteristics and a number of useful functions and potential settings offer plenty of options for the operation oriented model train enthusiast. There is a function “heavy train” where acceleration and deceleration time are doubled and the motor acoustically works with higher revs. When activating the “locomotive brake”, the locomotive changes to idle and slows down a bit faster than normal – if required, right down to a standstill. This function works independently from the throttle setting. In shunting mode, the locomotive accelerates and slows down faster than in normal mode. Model LokSound decoder for DCC with RailComPlus®, Motorola®, M4 and Selectrix Automatic registration at command stations with RailComPlus® or mfx® functionality Universal electronics with plug-in centre pick-up Newly developed, aerodynamically optimised, load dependent smoke generator synchronised with LokSound Two sugar cube speakers with large sound enclosure under the hood 31 special functions PowerPack storage capacitor for uninterrupted power supply Powerful coreless motor with flywheel Digital remote control for coupler in NEM shaft Prototypical headlights Separately switchable shunting lighting Cab lighting and control panel lighting may be separately switched Switchable under-carriage lighting Engraved fibre-optic light guide Metal chassis and body Perforated fan grills in long hood Robust yet filigree grab irons off metal and plastic Multicoloured cab interior with engineer figure Length over buffers = 121 mm Detail Videos Ihr Browser kann dieses Video nicht wiedergeben. Art.No. Delivery 31423 Diesel loco, Post Lok 5, red, Ep. IV, prototype around 1987, Sound+Smoke, el. Coupler, DC/AC in stock 31741 Diesel loco, 260 610 DB, blue-cream, Era IV, prototype around 1980, Sound+Smoke, el. Coupler, DC/AC (replaces Art.-No: 31411) in stock 31742 Diesel loco, 362 614 DB, traffic red, Era VI, prototype around 2014, Sound+Smoke, el. Coupler, DC/AC in stock 31743 Diesel loco, V60 114 DB/DFS, oldred, Era VI, prototype around 2020, Sound+Smoke, el. Coupler, DC/AC in stock 31744 Diesel loco, 261 652 DB, oldred, Era IV, prototype around 1975, Sound+Smoke, el. Coupler, DC/AC in stock

  • 2-rail, direct current
  • 3-rail, alternating current
  • Sound

Selling price: CHF 403.00 RRP CHF 452.00

On order, lead time to be confirmed

10% off the recommended price
DB Class 362 diesel locomotive, number 614, in traffic red livery, Era VI, 2014. Model: DCS/ACS
ESU 31742 Scale H0
DB Class 362 diesel locomotive, number 614, in traffic red livery, Era VI, 2014. Model: DCS/ACS

Diesel loco, 362 614 DB, traffic red, Era VI, prototype around 2014, Sound+Smoke, el. Coupler, DC/AC Starting in 1956 the DB (Deutsche Bundesbahn) commenced the procurement of the three-axle shunting locomotive class V60 in order to modernize shunting operations. It was decided to employ a drive system with coupling rods and a jack shaft. Its maximum speed of 60 km/h in mainline gear matched the then common speed of long distance freight trains. The coal-fired oven (so called Dofa heater) only served for keeping the engine of a parked V60 at a suitable temperature. As from the 1990-ies the DB replaced these heaters with externally powered electric heaters. The DB actually differentiated the serial locomotives between light weight and heavy types. Externally one could not detect any difference. The heavy type with 54 t is constructed with a stronger frame compared to the lighter version with 48 t. With the advent of the computer suitable numbering system in 1968, the DB assigned the lighter version as class 260 and the heavy type as class 261. In 1987 the engine was reclassified as a minor locomotive (Kleinlokomotive - literally: small locomotive or locomotors). Class 260 became class 360 and the 261s became 361s. Its categorisation as a Kleinlok saved staff costs, because the railway no longer had to employ "engine drivers", but only "Kleinlok operators", i.e.: specially trained shunting personnel. The locomotives equipped with automatic coupler (AK) and radio control were reclassified as class 364 (light weight version) and class 365 (heavy type).  Class 362 and 363 were only designated in 1992 and denominate locomotives equipped with the Caterpillar engine 3412 DI-TA, which was installed  instead of the original Maybach GTO 6 / GTO 6A. The ESU model of the DB class V60 is completely new! Chassis, body, motor, gearbox, centre pick-up including its holding fixture, smoke generator, lighting, digital coupler, speaker as well as all details have been developed from scratch. The headlight inserts have vertical engravings in order to match the appearance of DB standard lanterns. The conversion from AC (as delivered) to DC mode is accomplished by pulling off the centre pick-up and by activating a small sliding switch right in front of the forward axle. The digitally remote controlled electromagnetic coupler (shunting coupler) is inserted into the standard coupler shaft as per NEM 362. The mounting height of the coupler can be adjusted in two steps. If necessary it can be removed and replaced by another (non-digital) coupler without soldering. The newly designed smoke generator supplies a larger amount of exhaust fumes. Of course, the LokSound 5 decoder is completely new. Smooth running characteristics and a number of useful functions and potential settings offer plenty of options for the operation oriented model train enthusiast. There is a function “heavy train” where acceleration and deceleration time are doubled and the motor acoustically works with higher revs. When activating the “locomotive brake”, the locomotive changes to idle and slows down a bit faster than normal – if required, right down to a standstill. This function works independently from the throttle setting. In shunting mode, the locomotive accelerates and slows down faster than in normal mode. Model LokSound decoder for DCC with RailComPlus®, Motorola®, M4 and Selectrix Automatic registration at command stations with RailComPlus® or mfx® functionality Universal electronics with plug-in centre pick-up Newly developed, aerodynamically optimised, load dependent smoke generator synchronised with LokSound Two sugar cube speakers with large sound enclosure under the hood 31 special functions PowerPack storage capacitor for uninterrupted power supply Powerful coreless motor with flywheel Digital remote control for coupler in NEM shaft Prototypical headlights Separately switchable shunting lighting Cab lighting and control panel lighting may be separately switched Switchable under-carriage lighting Engraved fibre-optic light guide Metal chassis and body Perforated fan grills in long hood Robust yet filigree grab irons off metal and plastic Multicoloured cab interior with engineer figure Length over buffers = 121 mm Detail Videos Ihr Browser kann dieses Video nicht wiedergeben. Art.No. Delivery 31423 Diesel loco, Post Lok 5, red, Ep. IV, prototype around 1987, Sound+Smoke, el. Coupler, DC/AC in stock 31741 Diesel loco, 260 610 DB, blue-cream, Era IV, prototype around 1980, Sound+Smoke, el. Coupler, DC/AC (replaces Art.-No: 31411) in stock 31742 Diesel loco, 362 614 DB, traffic red, Era VI, prototype around 2014, Sound+Smoke, el. Coupler, DC/AC in stock 31743 Diesel loco, V60 114 DB/DFS, oldred, Era VI, prototype around 2020, Sound+Smoke, el. Coupler, DC/AC in stock 31744 Diesel loco, 261 652 DB, oldred, Era IV, prototype around 1975, Sound+Smoke, el. Coupler, DC/AC in stock

  • 2-rail, direct current
  • 3-rail, alternating current
  • Sound

Selling price: CHF 403.00 RRP CHF 452.00

On order, lead time to be confirmed

10% off the recommended price
DB/DFS diesel locomotive V60 114 in old red livery, 2020, Era VI, 2020, DCS/ACS
ESU 31743 Scale H0
DB/DFS diesel locomotive V60 114 in old red livery, 2020, Era VI, 2020, DCS/ACS

Diesel loco, V60 114 DB/DFS, oldred, Era VI, prototype around 2020, Sound+Smoke, el. Coupler, DC/AC Starting in 1956 the DB (Deutsche Bundesbahn) commenced the procurement of the three-axle shunting locomotive class V60 in order to modernize shunting operations. It was decided to employ a drive system with coupling rods and a jack shaft. Its maximum speed of 60 km/h in mainline gear matched the then common speed of long distance freight trains. The coal-fired oven (so called Dofa heater) only served for keeping the engine of a parked V60 at a suitable temperature. As from the 1990-ies the DB replaced these heaters with externally powered electric heaters. The DB actually differentiated the serial locomotives between light weight and heavy types. Externally one could not detect any difference. The heavy type with 54 t is constructed with a stronger frame compared to the lighter version with 48 t. With the advent of the computer suitable numbering system in 1968, the DB assigned the lighter version as class 260 and the heavy type as class 261. In 1987 the engine was reclassified as a minor locomotive (Kleinlokomotive - literally: small locomotive or locomotors). Class 260 became class 360 and the 261s became 361s. Its categorisation as a Kleinlok saved staff costs, because the railway no longer had to employ "engine drivers", but only "Kleinlok operators", i.e.: specially trained shunting personnel. The locomotives equipped with automatic coupler (AK) and radio control were reclassified as class 364 (light weight version) and class 365 (heavy type).  Class 362 and 363 were only designated in 1992 and denominate locomotives equipped with the Caterpillar engine 3412 DI-TA, which was installed  instead of the original Maybach GTO 6 / GTO 6A. The ESU model of the DB class V60 is completely new! Chassis, body, motor, gearbox, centre pick-up including its holding fixture, smoke generator, lighting, digital coupler, speaker as well as all details have been developed from scratch. The headlight inserts have vertical engravings in order to match the appearance of DB standard lanterns. The conversion from AC (as delivered) to DC mode is accomplished by pulling off the centre pick-up and by activating a small sliding switch right in front of the forward axle. The digitally remote controlled electromagnetic coupler (shunting coupler) is inserted into the standard coupler shaft as per NEM 362. The mounting height of the coupler can be adjusted in two steps. If necessary it can be removed and replaced by another (non-digital) coupler without soldering. The newly designed smoke generator supplies a larger amount of exhaust fumes. Of course, the LokSound 5 decoder is completely new. Smooth running characteristics and a number of useful functions and potential settings offer plenty of options for the operation oriented model train enthusiast. There is a function “heavy train” where acceleration and deceleration time are doubled and the motor acoustically works with higher revs. When activating the “locomotive brake”, the locomotive changes to idle and slows down a bit faster than normal – if required, right down to a standstill. This function works independently from the throttle setting. In shunting mode, the locomotive accelerates and slows down faster than in normal mode. Model LokSound decoder for DCC with RailComPlus®, Motorola®, M4 and Selectrix Automatic registration at command stations with RailComPlus® or mfx® functionality Universal electronics with plug-in centre pick-up Newly developed, aerodynamically optimised, load dependent smoke generator synchronised with LokSound Two sugar cube speakers with large sound enclosure under the hood 31 special functions PowerPack storage capacitor for uninterrupted power supply Powerful coreless motor with flywheel Digital remote control for coupler in NEM shaft Prototypical headlights Separately switchable shunting lighting Cab lighting and control panel lighting may be separately switched Switchable under-carriage lighting Engraved fibre-optic light guide Metal chassis and body Perforated fan grills in long hood Robust yet filigree grab irons off metal and plastic Multicoloured cab interior with engineer figure Length over buffers = 121 mm Detail Videos Ihr Browser kann dieses Video nicht wiedergeben. Art.No. Delivery 31423 Diesel loco, Post Lok 5, red, Ep. IV, prototype around 1987, Sound+Smoke, el. Coupler, DC/AC in stock 31741 Diesel loco, 260 610 DB, blue-cream, Era IV, prototype around 1980, Sound+Smoke, el. Coupler, DC/AC (replaces Art.-No: 31411) in stock 31742 Diesel loco, 362 614 DB, traffic red, Era VI, prototype around 2014, Sound+Smoke, el. Coupler, DC/AC in stock 31743 Diesel loco, V60 114 DB/DFS, oldred, Era VI, prototype around 2020, Sound+Smoke, el. Coupler, DC/AC in stock 31744 Diesel loco, 261 652 DB, oldred, Era IV, prototype around 1975, Sound+Smoke, el. Coupler, DC/AC in stock

  • 2-rail, direct current
  • 3-rail, alternating current
  • Sound

Selling price: CHF 403.00 RRP CHF 452.00

On order, lead time to be confirmed

10% off the recommended price
DB Class 261 diesel locomotive, red livery 65, red, Era IV, 1975, DCS/ACS
ESU 31744 Scale H0
DB Class 261 diesel locomotive, red livery 65, red, Era IV, 1975, DCS/ACS

Diesel loco, 261 652 DB, oldred, Era IV, prototype around 1975, Sound+Smoke, el. Coupler, DC/AC Starting in 1956 the DB (Deutsche Bundesbahn) commenced the procurement of the three-axle shunting locomotive class V60 in order to modernize shunting operations. It was decided to employ a drive system with coupling rods and a jack shaft. Its maximum speed of 60 km/h in mainline gear matched the then common speed of long distance freight trains. The coal-fired oven (so called Dofa heater) only served for keeping the engine of a parked V60 at a suitable temperature. As from the 1990-ies the DB replaced these heaters with externally powered electric heaters. The DB actually differentiated the serial locomotives between light weight and heavy types. Externally one could not detect any difference. The heavy type with 54 t is constructed with a stronger frame compared to the lighter version with 48 t. With the advent of the computer suitable numbering system in 1968, the DB assigned the lighter version as class 260 and the heavy type as class 261. In 1987 the engine was reclassified as a minor locomotive (Kleinlokomotive - literally: small locomotive or locomotors). Class 260 became class 360 and the 261s became 361s. Its categorisation as a Kleinlok saved staff costs, because the railway no longer had to employ "engine drivers", but only "Kleinlok operators", i.e.: specially trained shunting personnel. The locomotives equipped with automatic coupler (AK) and radio control were reclassified as class 364 (light weight version) and class 365 (heavy type).  Class 362 and 363 were only designated in 1992 and denominate locomotives equipped with the Caterpillar engine 3412 DI-TA, which was installed  instead of the original Maybach GTO 6 / GTO 6A. The ESU model of the DB class V60 is completely new! Chassis, body, motor, gearbox, centre pick-up including its holding fixture, smoke generator, lighting, digital coupler, speaker as well as all details have been developed from scratch. The headlight inserts have vertical engravings in order to match the appearance of DB standard lanterns. The conversion from AC (as delivered) to DC mode is accomplished by pulling off the centre pick-up and by activating a small sliding switch right in front of the forward axle. The digitally remote controlled electromagnetic coupler (shunting coupler) is inserted into the standard coupler shaft as per NEM 362. The mounting height of the coupler can be adjusted in two steps. If necessary it can be removed and replaced by another (non-digital) coupler without soldering. The newly designed smoke generator supplies a larger amount of exhaust fumes. Of course, the LokSound 5 decoder is completely new. Smooth running characteristics and a number of useful functions and potential settings offer plenty of options for the operation oriented model train enthusiast. There is a function “heavy train” where acceleration and deceleration time are doubled and the motor acoustically works with higher revs. When activating the “locomotive brake”, the locomotive changes to idle and slows down a bit faster than normal – if required, right down to a standstill. This function works independently from the throttle setting. In shunting mode, the locomotive accelerates and slows down faster than in normal mode. Model LokSound decoder for DCC with RailComPlus®, Motorola®, M4 and Selectrix Automatic registration at command stations with RailComPlus® or mfx® functionality Universal electronics with plug-in centre pick-up Newly developed, aerodynamically optimised, load dependent smoke generator synchronised with LokSound Two sugar cube speakers with large sound enclosure under the hood 31 special functions PowerPack storage capacitor for uninterrupted power supply Powerful coreless motor with flywheel Digital remote control for coupler in NEM shaft Prototypical headlights Separately switchable shunting lighting Cab lighting and control panel lighting may be separately switched Switchable under-carriage lighting Engraved fibre-optic light guide Metal chassis and body Perforated fan grills in long hood Robust yet filigree grab irons off metal and plastic Multicoloured cab interior with engineer figure Length over buffers = 121 mm Detail Videos Ihr Browser kann dieses Video nicht wiedergeben. Art.No. Delivery 31423 Diesel loco, Post Lok 5, red, Ep. IV, prototype around 1987, Sound+Smoke, el. Coupler, DC/AC in stock 31741 Diesel loco, 260 610 DB, blue-cream, Era IV, prototype around 1980, Sound+Smoke, el. Coupler, DC/AC (replaces Art.-No: 31411) in stock 31742 Diesel loco, 362 614 DB, traffic red, Era VI, prototype around 2014, Sound+Smoke, el. Coupler, DC/AC in stock 31743 Diesel loco, V60 114 DB/DFS, oldred, Era VI, prototype around 2020, Sound+Smoke, el. Coupler, DC/AC in stock 31744 Diesel loco, 261 652 DB, oldred, Era IV, prototype around 1975, Sound+Smoke, el. Coupler, DC/AC in stock

  • 2-rail, direct current
  • 3-rail, alternating current
  • Sound

Selling price: CHF 403.00 RRP CHF 452.00

On order, lead time to be confirmed

10% off the recommended price
DB V 220 diesel locomotive no. 076 in red livery, Era IV, 1977. Model: DCS/ACS
ESU 31750 Scale H0
DB V 220 diesel locomotive no. 076 in red livery, Era IV, 1977. Model: DCS/ACS

220 076, DB, dark red, DC/AC The V200 was THE locomotive face of the German Federal Railway (DB) in the 1950s. No other diesel locomotive shaped the image of the young DB as much as the long locomotive with its characteristic aluminium decorative strips, which tapered at the front ends into a stylised "V". The production locomotives built from 1956 onwards were fitted with 1,100 hp (at 1,500 rpm) 12-cylinder engines from Daimler-Benz (MB 820 Bb), MAN (12 V 18/21) or Maybach (MD 650). A Hagenuk steam heating boiler provided train heating, capable of heating an express train of ten to twelve coaches. A notable feature was the fitting of all V200.0 locomotives with multiple-unit control equipment, which enabled double-heading and push-pull operation. With Krauss-Maffei (V200 001–005, V200 026–086) and MaK (V200 006 to 025), only two manufacturers supplied the 86 locomotives to the DB. The MaK locomotives were clearly distinguishable at the front by a flatter version of the "V" compared with the Krauss-Maffei locomotives. The first allocations of production locomotives went to the motive power depots (Bw) at Frankfurt-Griesheim (15 locomotives), Hamburg-Altona (19), Hamm P (32) and Villingen/Schwarzwald (20). From the factory, V200 056 to 086 received simple DB logos on their sides instead of the prominent "Deutsche Bundesbahn" lettering. From the early 1970s onwards, the aluminium decorative strips were removed and the locomotives were given a decorative line as a dividing element between the red and grey areas. Three V200 locomotives were repainted in the 1970s in the then fashionable colours of ocean blue and ivory. The distinctive "V" on the front ends was omitted. After the DB had already withdrawn the Class 220 from service from 1978 onwards, it offered the locomotives, some of which were barely 20 years old, for sale to foreign railways. A total of 30 locomotives found buyers in Italy, France (Algeria) and Spain. Body and frame made of metal Open grille ventilators in the roof area, flat MaK "V" on the front ends Multicoloured cab with driver figure Prototypical partial view through the engine room Multi-part bogie fairings Separately applied handrails and steps Close coupler in a guided NEM pocket Five-pole ESU motor with two flywheels Drive via cardan/worm gearing to three axles, two traction tyres LokSound decoder for DCC, Motorola®, M4, and Selectrix operation Automatic registration with command stations featuring RailComPlus® or mfx® functionality PowerPack buffer capacitor for uninterrupted power supply Dual speaker with large sound capsule for the ultimate sound experience Universal electronics with plug-in pickup shoe and switch for changing between two-rail and centre-rail operation 2 smoke generators, synchronised with the LokSound; during shunting operations only one smoke generator is active Digitised original sounds of a locomotive with V 200 with Maybach diesel engines MD 650 Sensor-controlled sounds during slow curve negotiation Direction-dependent lighting changeover, train-end headlights can be switched off, shunting, cab, driver's desk and engine room lighting Brake sparks when braking hard Pipette for filling the smoke generator, buffer beam detail parts and a 2nd coupler are included The minimum radius for operation is 360 mm Length over the buffers = 209.7 mm

  • 2-rail, direct current
  • 3-rail, alternating current
  • Sound

Selling price: CHF 420.00 RRP CHF 471.00

On order, lead time to be confirmed

10% off the recommended price
DB diesel locomotive V 220 060 in ocean blue/beige, Era IV, 1980, DCS/ACSAC
ESU 31751 Scale H0
DB diesel locomotive V 220 060 in ocean blue/beige, Era IV, 1980, DCS/ACSAC

220 060, DB, ocean blue/beige, DC/AC The V200 was THE locomotive face of the German Federal Railway (DB) in the 1950s. No other diesel locomotive shaped the image of the young DB as much as the long locomotive with its characteristic aluminium decorative strips, which tapered at the front ends into a stylised "V". The production locomotives built from 1956 onwards were fitted with 1,100 hp (at 1,500 rpm) 12-cylinder engines from Daimler-Benz (MB 820 Bb), MAN (12 V 18/21) or Maybach (MD 650). A Hagenuk steam heating boiler served for train heating, capable of heating an express train of ten to twelve coaches. A particular feature was the fitting of all V200.0 locomotives with multiple-unit control, which enabled double-heading and push-pull operation. With Krauss-Maffei (V200 001–005, V200 026–086) and MaK (V200 006 to 025), only two manufacturers supplied the 86 locomotives to the DB. The MaK locomotives differed noticeably at the front by having a flatter version of the "V" compared to the Krauss-Maffei locomotives. The first allocations of production locomotives went to the motive power depots (Bw) of Frankfurt-Griesheim (15 locomotives), Hamburg-Altona (19), Hamm P (32) and Villingen/Schwarzwald (20). From the factory, V200 056 to 086 received simple DB logos on their sides instead of the prominent "Deutsche Bundesbahn" lettering. From the early 1970s, the aluminium decorative strips were removed and the locomotives were given a decorative line as a separation between the red and grey areas. Three V200 locomotives were repainted in the 1970s in the then fashionable colours of ocean blue and ivory. The distinctive "V" on the front ends was omitted. After the DB had already withdrawn the Class 220 from 1978 onwards, it offered the locomotives, some barely 20 years old, for sale to foreign railways. A total of 30 locomotives found buyers in Italy, France (Algeria) and Spain. Body and frame made of metal Open grille ventilators in the roof area, flat MaK "V" on the front ends Multicoloured cab with driver figure Prototypical partial view through the engine room Multi-part bogie fairings Separately applied handrails and steps Coupler in guided NEM pocket Five-pole ESU motor with two flywheels Drive via cardan/worm gearing to three axles, two traction tyres LokSound decoder for DCC, Motorola®, M4, and Selectrix operation Automatic registration with command stations featuring RailComPlus® or mfx® functionality PowerPack buffer capacitor for uninterrupted power supply Dual speaker with large sound capsule for the ultimate sound experience Universal electronics with plug-in pickup shoe and switch for changing between two-rail and centre-rail operation 2 smoke generators, synchronised with the LokSound; during shunting operations only one smoke generator is active Digitised original sounds of a locomotive with V 200 with Maybach diesel engines MD 650 Sensor-controlled sounds during slow curve negotiation Directional lighting changeover, the leading headlights can be switched off, shunting lighting, cab lighting, control desk lighting, and engine room lighting Brake sparks when braking hard Pipette for filling the smoke generator, buffer beam detail parts and a 2nd coupler are included The minimum radius for operation is 360 mm Length over the buffers = 209.7 mm

  • 2-rail, direct current
  • 3-rail, alternating current
  • Sound

Selling price: CHF 420.00 RRP CHF 471.00

On order, lead time to be confirmed

10% off the recommended price
DB Class 202 diesel locomotive 594 in traffic red livery, Era V, circa 2000, ACS/DCS
ESU 31762 Scale H0
DB Class 202 diesel locomotive 594 in traffic red livery, Era V, circa 2000, ACS/DCS

202 594 DB, traffic red, Era V, DC/AC The most widely built German main-line diesel locomotive class must, of course, have a place in the ESU range as a fully equipped H0 model. The features found on its DB sister are present here too. One particular challenge was to replicate the two traction motor cooling fans, which are controlled independently in the prototype, as separately switchable motors in the model as well. The etched fan covers allow the work of the fan wheels to be observed, supported acoustically by the corresponding sounds. To ensure that the crisp sound of the 12 KVD diesel engine comes across well, we fitted the loudspeaker with a so-called passive radiator and developed a sound chamber that makes the best possible use of the available space. It goes without saying that a sound-synchronised smoke generator, a bell-armature motor with flywheel, digital couplers at both ends, sprung buffers, and numerous lighting functions are all on board. As you have come to expect from ESU, we studied the prototype closely when designing our models and reproduced the details with minimal compromise. On locomotives fitted with a steam heating boiler, you will find the corresponding pipework; the ventilation grilles are made up of multiple parts; and the characteristic reflectors of the lower headlamps give the model a face even when the lighting is switched off. As with all our V100 models, the magnetically secured cab roof can be lifted off, and the personal equipment of the locomotive crew can be supplemented further as desired. A particularly large number of details are revealed by the running gear, especially in the light grey livery to TGL 1808. Deeply engraved bogie side frames, differently equipped depending on the variant, with real springs and open or covered areas beneath the frame according to type, impressively demonstrate the differences within the locomotive family. Except on the traffic red version, the Reichsbahn lettering and running number plate are included as etched parts. For the class 111 locomotives, which have a lower maximum speed in the prototype, we have of course not simply reduced the top speed in a blunt fashion, but have adjusted all CVs relevant to the running dynamics accordingly. NEW TOOLING Metal body and frame Digitally switchable coupler Situation-dependent and sequentially activated motor-driven cooling fans in the long hood Bell-armature motor with flywheel Drive via cardan/worm gearing to all four axles, two traction tyres LokSound 5 decoder for DCC, Motorola®, M4 and Selectrix operation Switchable smoke generator with smoke output synchronised to the LokSound Automatic registration with command stations featuring RailComPlus® or mfx® functionality Universal electronics with plug-in pickup shoe and sliding switch for changing over between two-rail and centre-rail operation PowerPack buffer capacitor for uninterrupted power supply High-quality speaker with a large sound capsule for the ultimate listening experience Digitalised original sounds of a 12 KVD 18/21 diesel engine Squealing sound via curve sensor when travelling slowly through curves Direction-dependent lighting changeover (the lights switch on one after another in a prototypical manner), leading headlights can be switched off, cab and driver's desk lighting Brake sparks during hard braking Separately applied handrails, steps partially open-framed Delicate multi-part grilles on the sides of the long nose Removable roof held in place by magnets (Note: do not lift the model by the roof!) Finely detailed, multi-colour cabs, engine driver figure Sprung buffers Pipette for filling the smoke generator is included The minimum radius for operation is 360 mm. Length over the buffers 110 = 160.2 mm, 111, 202 = 163.7 mm The Deutsche Reichsbahn of the GDR did not include a medium-power line diesel locomotive between the V60 and the V180 when drawing up its diesel locomotive type programme in the 1950s. When the need became acute in the early 1960s, VEB Lokomotivbau "Karl Marx" and the Elektrotechnische Werke "Hans Beimler" developed the V100 with the stipulation that as many assemblies as possible from the V60 and V180 should be used, the 100 standing for an output of approximately 1,000 hp. The three pre-production locomotives delivered in 1965 were initially fitted with only 900 hp twelve-cylinder engines of the type 12 KVD 18/21. The maximum speed was 100 km/h. After extensive testing, series production began as early as the following year. A total of 869 locomotives were built across several series, making the V100 the most-produced line locomotive of the DR. Already in the first years of service it became apparent that the V100 (or Class 110, as it was known from 1969 onwards in accordance with data-processing requirements) could not replace all steam locomotive classes with a similar operating profile. Through advances in engine development and the installation of charge-air cooling, the output and reliability of the 12 KVD type were improved. The final development stage of the 12 KVD engine was set at 1,100 kW, almost 400 kW more than in the first production series. For export, including to China, LEW derived the V100.3 sub-class from the V100, intended for heavy shunting duties and with a maximum speed of only 65 km/h. The locomotive now lettered as 111 002, belonging to Leipziger Dampf KulTour LDK, was delivered to the then Czechoslovakia in 1981. The massive horizontal pilot fitted with a warning livery below the buffer beam reveals that the locomotive does not originate from Deutsche Reichsbahn stock. LDK uses the 111, which always gleams as if brand new, in shunting service, or hires it out for engineering train duties. The version derived from the V100.3 for the DR and industrial railways in the GDR was designated V100.4. Although the locomotives carried ballast weights instead of a steam heating boiler, the orange four-axle machines could also be observed on passenger trains during the summer. As the transmission of the 111 did not fully prove itself in heavy shunting service, only 37 examples were built for the DR, with a further six for GDR industry. Nine locomotives equipped with a single-sided gangway bridge and power take-off flange worked the so-called ditch-clearing units GRE. The fluid reversing gearbox, better suited to the demands of shunting service, was tested from 1978 in two Class 110 locomotives. It did not enter series production until 1991 with Class 108, which, following the unification of the two German state railways, was subsequently designated Class 298. After the last V100 locomotives were withdrawn from Deutsche Bahn AG in the 2010s, a considerable number passed to private railway operators and heritage railways.

  • 2-rail, direct current
  • 3-rail, alternating current
  • Sound

Selling price: CHF 402.00 RRP CHF 450.00

On order, lead time to be confirmed

10% off the recommended price
DR Class 110 diesel locomotive 110 300 in old red livery. The locomotive looks as it did around 1972. Era IV. ACS/DCS.
ESU 31765 Scale H0
DR Class 110 diesel locomotive 110 300 in old red livery. The locomotive looks as it did around 1972. Era IV. ACS/DCS.

Removable roof held in place by magnets (Caution: Do not lift the model by the roof!)

  • 2-rail, direct current
  • 3-rail, alternating current
  • Sound

Selling price: CHF 402.00 RRP CHF 450.00

On order, lead time to be confirmed

10% off the recommended price
DB diesel locomotive ex DR Class 298 051 in traffic red, operating condition around 2002, Era V, ACS/DCS
ESU 31766 Scale H0
DB diesel locomotive ex DR Class 298 051 in traffic red, operating condition around 2002, Era V, ACS/DCS

Removable roof held in place by magnets (Caution: Do not lift the model by the roof!)

  • 2-rail, direct current
  • 3-rail, alternating current
  • Sound

Selling price: CHF 402.00 RRP CHF 450.00

On order, lead time to be confirmed

10% off the recommended price
DR Diesel Locomotive Class 112 268, dark red, prototype condition around 1989, Era IV. ACS/DCS
ESU 31767 Scale H0
DR Diesel Locomotive Class 112 268, dark red, prototype condition around 1989, Era IV. ACS/DCS

Removable roof held in place by magnets (Caution: Do not lift the model by the roof!)

  • 2-rail, direct current
  • 3-rail, alternating current
  • Sound

Selling price: CHF 402.00 RRP CHF 450.00

On order, lead time to be confirmed

n-coach no. 451.4 80 22-34 240-8 2nd class GfF E
ESU 36067 Scale H0
n-coach no. 451.4 80 22-34 240-8 2nd class GfF E

n-car, H0, Bnrz 451.4, 80 22-34 240-8, 2. Kl, GfF Ep. VI, blau-weiß, DC Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36478 Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36482 BDnrzf784.1, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau Art.No. 36510 Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36511 Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36512 AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36513 Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36515 Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot Prototype Model Picture Gallery Für den Einsatz im Nahverkehr aber auch zur Verstärkung von Schnellzügen beschaffte die Deutsche Bundesbahn DB zwischen 1959 und 1977 insgesamt mehr als 4800 Wagen in drei Grundrissformen: Reine 2. Klasse, 1. und 2. Klasse sowie Steuerwagen mit Gepäck- und 2.-Klasse-Großräumen. Der Wagenfamilie wurde der Gattungs-Buchstabe „n“ zugewiesen. Ein Prototypwagen besaß bereits diefür den Spitznamen „Silberlinge“ verantwortliche, nicht lackierte Außenhaut mit gebürstetem Pfauenaugenmuster. Der Verzicht auf eine Lackierung reduzierte das Gewicht um etwa zwei Tonnen. Mit einem Gesamtgewicht zwischen 27 und 30 t waren beispielsweise die Zweite-Klasse-Wagen mindestens 5t leichter, als die Vorkriegs-Eilzugwagen der Bauart 1936. Der zunächst eingebaute Achsgenerator-Typ D62 beschränkte die Höchstgeschwindigkeit auf 120 km/h. Die lauftechnisch zulässigen 140 km/h durften mit einer anderen Achsgenerator-Bauart oder von den elektrisch vom Triebfahrzeug versorgten Wagen gefahren werden. Die DB beschaffte 1969 insgesamt 180 Exemplare der Bauart Bnrzb724, die im Katastrophenfall einfach zu Lazarettwagen umgerüstet werden können. Markanter Unterschied zu den zuvor gefertigten Wagen ist der nahezu senkrechte Dachabschluss („Steildach“). Die ersten Steuerwagen besaßen am Führerstandsende eine Übergangsmöglichkeit zum nächsten Wagen, weshalb der Lokführer rechts des Ganges in einem zugigen kleinen Räumchen („Hasenkasten“) saß. Ab 1972 erhielt die DB Steuerwagen mit modernem „Karlsruher Kopf“. Um den Nahverkehr attraktiver zu gestalten, ließ die DB ab 1984 mehrere Garnituren innen modernisieren und außen in Kieselgrau-Orange lackieren und setzte sie mit passender 218 unter dem Produktnamen City-Bahn ein. Der Erfolg des Produkts bewog die DB, ab 1990 weitere Wagen durch neu bezogene Sitze, geänderte Gepäckablagen und einen eue Außenlackierung zu modernisieren. Es entstand eine Vielzahl unterschiedlicher Varianten der als Re-Design-Wagen bezeichneten Typen, die zunächst im damals aktuellen Minttürkis-Lichtgrau lackiert wurden. Ab 1993 erhielt die DB Steuerwagen mit an den Triebwagen VT 628 erinnern der Führerstandseite, dem „Wittenberger Kopf“. 2019, also 60 Jahre nach Indienststellung der ersten Silberlinge, befinden sich noch immer Wagen im täglichen Einsatz. Maßstäbliche H0-Modelle der n-Wagen Silberling Mehrfarbige Inneneinrichtung Separat eingesetzte Sitzbänke Steuerwagen mit separat schaltbarer Stirn-, Führerstand-, Gepäckraum- und Fahrgastraumbeleuchtung. Fernlicht beim Wittenberger Steuerwagen Gefederte Faltenbälge Freistehende Griffstangen Trittstufen an den Wagenenden und an den Einstiegen als durchbrochene Ätzteile Nachbildung der Wellenradscheiben bei silbernen, Nachbildung der glatten Scheibenräder bei verkehrsroten Wagen Mehrteilige Drehgestelle mit Nachbildung der Klotz- oder Scheibenbremsanlage Achslagerbleche und Halbachsen für reibungsfreie Achtpunkt-Stromabnahme Einfache Nachrüstung der Sitzwagen mit einer ESU-Innenbeleuchtung Bügelkupplung in kulissengeführtem Normschacht Optionaler AC-Radsatz unter der Art.-Nr. 41200 erhältlich Befahrbarer Mindestradius = 360 mm Länge über Puffer = 303 mm Click the image for a bigger view. Art.No. Delivery 36067 n-car, H0, Bnrz 451.4, 80 22-34 240-8, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36068 n-car, H0, Bnrz 450.3, 80 22-35 706-7, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36069 n-car, H0, AB nrz 418.4, 80 31-34 359-5, 1./2. Kl, GfF Ep. VI, blau-weiß, DC available 36070 n-car, H0, Bnrdzf 483.1, 80 80-35 163-0, Steuerwagen, GfF Ep. VI, blau-weiß, DC available 36477 n-car, H0, Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36478 n-car, H0, Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36482 n-car, H0, BDnrzf784, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau, DC available 36510 n-car, H0, Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36511 n-car, H0, Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36512 n-car, H0, AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36513 n-car, H0, Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau, DC available 36515 n-car, H0, Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot, DC available

Selling price: CHF 63.90 RRP CHF 68.90

On order, lead time to be confirmed

2nd Class Passenger Coach Bnrz 450.3 80 22-35 706-7 GfF Era
ESU 36068 Scale H0
2nd Class Passenger Coach Bnrz 450.3 80 22-35 706-7 GfF Era

n-car, H0, Bnrz 450.3, 80 22-35 706-7, 2. Kl, GfF Ep. VI, blau-weiß, DC Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36478 Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36482 BDnrzf784.1, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau Art.No. 36510 Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36511 Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36512 AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36513 Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36515 Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot Prototype Model Picture Gallery Für den Einsatz im Nahverkehr aber auch zur Verstärkung von Schnellzügen beschaffte die Deutsche Bundesbahn DB zwischen 1959 und 1977 insgesamt mehr als 4800 Wagen in drei Grundrissformen: Reine 2. Klasse, 1. und 2. Klasse sowie Steuerwagen mit Gepäck- und 2.-Klasse-Großräumen. Der Wagenfamilie wurde der Gattungs-Buchstabe „n“ zugewiesen. Ein Prototypwagen besaß bereits diefür den Spitznamen „Silberlinge“ verantwortliche, nicht lackierte Außenhaut mit gebürstetem Pfauenaugenmuster. Der Verzicht auf eine Lackierung reduzierte das Gewicht um etwa zwei Tonnen. Mit einem Gesamtgewicht zwischen 27 und 30 t waren beispielsweise die Zweite-Klasse-Wagen mindestens 5t leichter, als die Vorkriegs-Eilzugwagen der Bauart 1936. Der zunächst eingebaute Achsgenerator-Typ D62 beschränkte die Höchstgeschwindigkeit auf 120 km/h. Die lauftechnisch zulässigen 140 km/h durften mit einer anderen Achsgenerator-Bauart oder von den elektrisch vom Triebfahrzeug versorgten Wagen gefahren werden. Die DB beschaffte 1969 insgesamt 180 Exemplare der Bauart Bnrzb724, die im Katastrophenfall einfach zu Lazarettwagen umgerüstet werden können. Markanter Unterschied zu den zuvor gefertigten Wagen ist der nahezu senkrechte Dachabschluss („Steildach“). Die ersten Steuerwagen besaßen am Führerstandsende eine Übergangsmöglichkeit zum nächsten Wagen, weshalb der Lokführer rechts des Ganges in einem zugigen kleinen Räumchen („Hasenkasten“) saß. Ab 1972 erhielt die DB Steuerwagen mit modernem „Karlsruher Kopf“. Um den Nahverkehr attraktiver zu gestalten, ließ die DB ab 1984 mehrere Garnituren innen modernisieren und außen in Kieselgrau-Orange lackieren und setzte sie mit passender 218 unter dem Produktnamen City-Bahn ein. Der Erfolg des Produkts bewog die DB, ab 1990 weitere Wagen durch neu bezogene Sitze, geänderte Gepäckablagen und einen eue Außenlackierung zu modernisieren. Es entstand eine Vielzahl unterschiedlicher Varianten der als Re-Design-Wagen bezeichneten Typen, die zunächst im damals aktuellen Minttürkis-Lichtgrau lackiert wurden. Ab 1993 erhielt die DB Steuerwagen mit an den Triebwagen VT 628 erinnern der Führerstandseite, dem „Wittenberger Kopf“. 2019, also 60 Jahre nach Indienststellung der ersten Silberlinge, befinden sich noch immer Wagen im täglichen Einsatz. Maßstäbliche H0-Modelle der n-Wagen Silberling Mehrfarbige Inneneinrichtung Separat eingesetzte Sitzbänke Steuerwagen mit separat schaltbarer Stirn-, Führerstand-, Gepäckraum- und Fahrgastraumbeleuchtung. Fernlicht beim Wittenberger Steuerwagen Gefederte Faltenbälge Freistehende Griffstangen Trittstufen an den Wagenenden und an den Einstiegen als durchbrochene Ätzteile Nachbildung der Wellenradscheiben bei silbernen, Nachbildung der glatten Scheibenräder bei verkehrsroten Wagen Mehrteilige Drehgestelle mit Nachbildung der Klotz- oder Scheibenbremsanlage Achslagerbleche und Halbachsen für reibungsfreie Achtpunkt-Stromabnahme Einfache Nachrüstung der Sitzwagen mit einer ESU-Innenbeleuchtung Bügelkupplung in kulissengeführtem Normschacht Optionaler AC-Radsatz unter der Art.-Nr. 41200 erhältlich Befahrbarer Mindestradius = 360 mm Länge über Puffer = 303 mm Click the image for a bigger view. Art.No. Delivery 36067 n-car, H0, Bnrz 451.4, 80 22-34 240-8, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36068 n-car, H0, Bnrz 450.3, 80 22-35 706-7, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36069 n-car, H0, AB nrz 418.4, 80 31-34 359-5, 1./2. Kl, GfF Ep. VI, blau-weiß, DC available 36070 n-car, H0, Bnrdzf 483.1, 80 80-35 163-0, Steuerwagen, GfF Ep. VI, blau-weiß, DC available 36477 n-car, H0, Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36478 n-car, H0, Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36482 n-car, H0, BDnrzf784, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau, DC available 36510 n-car, H0, Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36511 n-car, H0, Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36512 n-car, H0, AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36513 n-car, H0, Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau, DC available 36515 n-car, H0, Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot, DC available

Selling price: CHF 63.90 RRP CHF 68.90

On order, lead time to be confirmed

n-Wagon AB nrz 418.4 80 31-34 359-5 1./2. Class G
ESU 36069 Scale H0
n-Wagon AB nrz 418.4 80 31-34 359-5 1./2. Class G

n-car, H0, AB nrz 418.4, 80 31-34 359-5, 1./2. Kl, GfF Ep. VI, blau-weiß, DC Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36478 Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36482 BDnrzf784.1, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau Art.No. 36510 Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36511 Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36512 AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36513 Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36515 Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot Prototype Model Picture Gallery Für den Einsatz im Nahverkehr aber auch zur Verstärkung von Schnellzügen beschaffte die Deutsche Bundesbahn DB zwischen 1959 und 1977 insgesamt mehr als 4800 Wagen in drei Grundrissformen: Reine 2. Klasse, 1. und 2. Klasse sowie Steuerwagen mit Gepäck- und 2.-Klasse-Großräumen. Der Wagenfamilie wurde der Gattungs-Buchstabe „n“ zugewiesen. Ein Prototypwagen besaß bereits diefür den Spitznamen „Silberlinge“ verantwortliche, nicht lackierte Außenhaut mit gebürstetem Pfauenaugenmuster. Der Verzicht auf eine Lackierung reduzierte das Gewicht um etwa zwei Tonnen. Mit einem Gesamtgewicht zwischen 27 und 30 t waren beispielsweise die Zweite-Klasse-Wagen mindestens 5t leichter, als die Vorkriegs-Eilzugwagen der Bauart 1936. Der zunächst eingebaute Achsgenerator-Typ D62 beschränkte die Höchstgeschwindigkeit auf 120 km/h. Die lauftechnisch zulässigen 140 km/h durften mit einer anderen Achsgenerator-Bauart oder von den elektrisch vom Triebfahrzeug versorgten Wagen gefahren werden. Die DB beschaffte 1969 insgesamt 180 Exemplare der Bauart Bnrzb724, die im Katastrophenfall einfach zu Lazarettwagen umgerüstet werden können. Markanter Unterschied zu den zuvor gefertigten Wagen ist der nahezu senkrechte Dachabschluss („Steildach“). Die ersten Steuerwagen besaßen am Führerstandsende eine Übergangsmöglichkeit zum nächsten Wagen, weshalb der Lokführer rechts des Ganges in einem zugigen kleinen Räumchen („Hasenkasten“) saß. Ab 1972 erhielt die DB Steuerwagen mit modernem „Karlsruher Kopf“. Um den Nahverkehr attraktiver zu gestalten, ließ die DB ab 1984 mehrere Garnituren innen modernisieren und außen in Kieselgrau-Orange lackieren und setzte sie mit passender 218 unter dem Produktnamen City-Bahn ein. Der Erfolg des Produkts bewog die DB, ab 1990 weitere Wagen durch neu bezogene Sitze, geänderte Gepäckablagen und einen eue Außenlackierung zu modernisieren. Es entstand eine Vielzahl unterschiedlicher Varianten der als Re-Design-Wagen bezeichneten Typen, die zunächst im damals aktuellen Minttürkis-Lichtgrau lackiert wurden. Ab 1993 erhielt die DB Steuerwagen mit an den Triebwagen VT 628 erinnern der Führerstandseite, dem „Wittenberger Kopf“. 2019, also 60 Jahre nach Indienststellung der ersten Silberlinge, befinden sich noch immer Wagen im täglichen Einsatz. Maßstäbliche H0-Modelle der n-Wagen Silberling Mehrfarbige Inneneinrichtung Separat eingesetzte Sitzbänke Steuerwagen mit separat schaltbarer Stirn-, Führerstand-, Gepäckraum- und Fahrgastraumbeleuchtung. Fernlicht beim Wittenberger Steuerwagen Gefederte Faltenbälge Freistehende Griffstangen Trittstufen an den Wagenenden und an den Einstiegen als durchbrochene Ätzteile Nachbildung der Wellenradscheiben bei silbernen, Nachbildung der glatten Scheibenräder bei verkehrsroten Wagen Mehrteilige Drehgestelle mit Nachbildung der Klotz- oder Scheibenbremsanlage Achslagerbleche und Halbachsen für reibungsfreie Achtpunkt-Stromabnahme Einfache Nachrüstung der Sitzwagen mit einer ESU-Innenbeleuchtung Bügelkupplung in kulissengeführtem Normschacht Optionaler AC-Radsatz unter der Art.-Nr. 41200 erhältlich Befahrbarer Mindestradius = 360 mm Länge über Puffer = 303 mm Click the image for a bigger view. Art.No. Delivery 36067 n-car, H0, Bnrz 451.4, 80 22-34 240-8, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36068 n-car, H0, Bnrz 450.3, 80 22-35 706-7, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36069 n-car, H0, AB nrz 418.4, 80 31-34 359-5, 1./2. Kl, GfF Ep. VI, blau-weiß, DC available 36070 n-car, H0, Bnrdzf 483.1, 80 80-35 163-0, Steuerwagen, GfF Ep. VI, blau-weiß, DC available 36477 n-car, H0, Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36478 n-car, H0, Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36482 n-car, H0, BDnrzf784, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau, DC available 36510 n-car, H0, Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36511 n-car, H0, Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36512 n-car, H0, AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36513 n-car, H0, Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau, DC available 36515 n-car, H0, Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot, DC available

Selling price: CHF 63.90 RRP CHF 68.90

On order, lead time to be confirmed

n coach Bnrdzf 483.1 80 80-35 163-0 driving trailer
ESU 36070 Scale H0
n coach Bnrdzf 483.1 80 80-35 163-0 driving trailer

n-car, H0, Bnrdzf 483.1, 80 80-35 163-0, Steuerwagen, GfF Ep. VI, blau-weiß, DC Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36478 Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36482 BDnrzf784.1, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau Art.No. 36510 Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36511 Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36512 AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36513 Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36515 Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot Prototype Model Picture Gallery Für den Einsatz im Nahverkehr aber auch zur Verstärkung von Schnellzügen beschaffte die Deutsche Bundesbahn DB zwischen 1959 und 1977 insgesamt mehr als 4800 Wagen in drei Grundrissformen: Reine 2. Klasse, 1. und 2. Klasse sowie Steuerwagen mit Gepäck- und 2.-Klasse-Großräumen. Der Wagenfamilie wurde der Gattungs-Buchstabe „n“ zugewiesen. Ein Prototypwagen besaß bereits diefür den Spitznamen „Silberlinge“ verantwortliche, nicht lackierte Außenhaut mit gebürstetem Pfauenaugenmuster. Der Verzicht auf eine Lackierung reduzierte das Gewicht um etwa zwei Tonnen. Mit einem Gesamtgewicht zwischen 27 und 30 t waren beispielsweise die Zweite-Klasse-Wagen mindestens 5t leichter, als die Vorkriegs-Eilzugwagen der Bauart 1936. Der zunächst eingebaute Achsgenerator-Typ D62 beschränkte die Höchstgeschwindigkeit auf 120 km/h. Die lauftechnisch zulässigen 140 km/h durften mit einer anderen Achsgenerator-Bauart oder von den elektrisch vom Triebfahrzeug versorgten Wagen gefahren werden. Die DB beschaffte 1969 insgesamt 180 Exemplare der Bauart Bnrzb724, die im Katastrophenfall einfach zu Lazarettwagen umgerüstet werden können. Markanter Unterschied zu den zuvor gefertigten Wagen ist der nahezu senkrechte Dachabschluss („Steildach“). Die ersten Steuerwagen besaßen am Führerstandsende eine Übergangsmöglichkeit zum nächsten Wagen, weshalb der Lokführer rechts des Ganges in einem zugigen kleinen Räumchen („Hasenkasten“) saß. Ab 1972 erhielt die DB Steuerwagen mit modernem „Karlsruher Kopf“. Um den Nahverkehr attraktiver zu gestalten, ließ die DB ab 1984 mehrere Garnituren innen modernisieren und außen in Kieselgrau-Orange lackieren und setzte sie mit passender 218 unter dem Produktnamen City-Bahn ein. Der Erfolg des Produkts bewog die DB, ab 1990 weitere Wagen durch neu bezogene Sitze, geänderte Gepäckablagen und einen eue Außenlackierung zu modernisieren. Es entstand eine Vielzahl unterschiedlicher Varianten der als Re-Design-Wagen bezeichneten Typen, die zunächst im damals aktuellen Minttürkis-Lichtgrau lackiert wurden. Ab 1993 erhielt die DB Steuerwagen mit an den Triebwagen VT 628 erinnern der Führerstandseite, dem „Wittenberger Kopf“. 2019, also 60 Jahre nach Indienststellung der ersten Silberlinge, befinden sich noch immer Wagen im täglichen Einsatz. Maßstäbliche H0-Modelle der n-Wagen Silberling Mehrfarbige Inneneinrichtung Separat eingesetzte Sitzbänke Steuerwagen mit separat schaltbarer Stirn-, Führerstand-, Gepäckraum- und Fahrgastraumbeleuchtung. Fernlicht beim Wittenberger Steuerwagen Gefederte Faltenbälge Freistehende Griffstangen Trittstufen an den Wagenenden und an den Einstiegen als durchbrochene Ätzteile Nachbildung der Wellenradscheiben bei silbernen, Nachbildung der glatten Scheibenräder bei verkehrsroten Wagen Mehrteilige Drehgestelle mit Nachbildung der Klotz- oder Scheibenbremsanlage Achslagerbleche und Halbachsen für reibungsfreie Achtpunkt-Stromabnahme Einfache Nachrüstung der Sitzwagen mit einer ESU-Innenbeleuchtung Bügelkupplung in kulissengeführtem Normschacht Optionaler AC-Radsatz unter der Art.-Nr. 41200 erhältlich Befahrbarer Mindestradius = 360 mm Länge über Puffer = 303 mm Click the image for a bigger view. Art.No. Delivery 36067 n-car, H0, Bnrz 451.4, 80 22-34 240-8, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36068 n-car, H0, Bnrz 450.3, 80 22-35 706-7, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36069 n-car, H0, AB nrz 418.4, 80 31-34 359-5, 1./2. Kl, GfF Ep. VI, blau-weiß, DC available 36070 n-car, H0, Bnrdzf 483.1, 80 80-35 163-0, Steuerwagen, GfF Ep. VI, blau-weiß, DC available 36477 n-car, H0, Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36478 n-car, H0, Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36482 n-car, H0, BDnrzf784, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau, DC available 36510 n-car, H0, Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36511 n-car, H0, Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36512 n-car, H0, AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36513 n-car, H0, Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau, DC available 36515 n-car, H0, Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot, DC available

Selling price: CHF 116.00 RRP CHF 128.00

On order, lead time to be confirmed

n coach H0 no. 778.1 2nd class DB Era IV DC
ESU 36477 Scale H0
n coach H0 no. 778.1 2nd class DB Era IV DC

n-car, H0, Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau, DC Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36478 Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36482 BDnrzf784.1, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau Art.No. 36510 Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36511 Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36512 AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36513 Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36515 Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot Prototype Model Picture Gallery Für den Einsatz im Nahverkehr aber auch zur Verstärkung von Schnellzügen beschaffte die Deutsche Bundesbahn DB zwischen 1959 und 1977 insgesamt mehr als 4800 Wagen in drei Grundrissformen: Reine 2. Klasse, 1. und 2. Klasse sowie Steuerwagen mit Gepäck- und 2.-Klasse-Großräumen. Der Wagenfamilie wurde der Gattungs-Buchstabe „n“ zugewiesen. Ein Prototypwagen besaß bereits diefür den Spitznamen „Silberlinge“ verantwortliche, nicht lackierte Außenhaut mit gebürstetem Pfauenaugenmuster. Der Verzicht auf eine Lackierung reduzierte das Gewicht um etwa zwei Tonnen. Mit einem Gesamtgewicht zwischen 27 und 30 t waren beispielsweise die Zweite-Klasse-Wagen mindestens 5t leichter, als die Vorkriegs-Eilzugwagen der Bauart 1936. Der zunächst eingebaute Achsgenerator-Typ D62 beschränkte die Höchstgeschwindigkeit auf 120 km/h. Die lauftechnisch zulässigen 140 km/h durften mit einer anderen Achsgenerator-Bauart oder von den elektrisch vom Triebfahrzeug versorgten Wagen gefahren werden. Die DB beschaffte 1969 insgesamt 180 Exemplare der Bauart Bnrzb724, die im Katastrophenfall einfach zu Lazarettwagen umgerüstet werden können. Markanter Unterschied zu den zuvor gefertigten Wagen ist der nahezu senkrechte Dachabschluss („Steildach“). Die ersten Steuerwagen besaßen am Führerstandsende eine Übergangsmöglichkeit zum nächsten Wagen, weshalb der Lokführer rechts des Ganges in einem zugigen kleinen Räumchen („Hasenkasten“) saß. Ab 1972 erhielt die DB Steuerwagen mit modernem „Karlsruher Kopf“. Um den Nahverkehr attraktiver zu gestalten, ließ die DB ab 1984 mehrere Garnituren innen modernisieren und außen in Kieselgrau-Orange lackieren und setzte sie mit passender 218 unter dem Produktnamen City-Bahn ein. Der Erfolg des Produkts bewog die DB, ab 1990 weitere Wagen durch neu bezogene Sitze, geänderte Gepäckablagen und einen eue Außenlackierung zu modernisieren. Es entstand eine Vielzahl unterschiedlicher Varianten der als Re-Design-Wagen bezeichneten Typen, die zunächst im damals aktuellen Minttürkis-Lichtgrau lackiert wurden. Ab 1993 erhielt die DB Steuerwagen mit an den Triebwagen VT 628 erinnern der Führerstandseite, dem „Wittenberger Kopf“. 2019, also 60 Jahre nach Indienststellung der ersten Silberlinge, befinden sich noch immer Wagen im täglichen Einsatz. Maßstäbliche H0-Modelle der n-Wagen Silberling Mehrfarbige Inneneinrichtung Separat eingesetzte Sitzbänke Steuerwagen mit separat schaltbarer Stirn-, Führerstand-, Gepäckraum- und Fahrgastraumbeleuchtung. Fernlicht beim Wittenberger Steuerwagen Gefederte Faltenbälge Freistehende Griffstangen Trittstufen an den Wagenenden und an den Einstiegen als durchbrochene Ätzteile Nachbildung der Wellenradscheiben bei silbernen, Nachbildung der glatten Scheibenräder bei verkehrsroten Wagen Mehrteilige Drehgestelle mit Nachbildung der Klotz- oder Scheibenbremsanlage Achslagerbleche und Halbachsen für reibungsfreie Achtpunkt-Stromabnahme Einfache Nachrüstung der Sitzwagen mit einer ESU-Innenbeleuchtung Bügelkupplung in kulissengeführtem Normschacht Optionaler AC-Radsatz unter der Art.-Nr. 41200 erhältlich Befahrbarer Mindestradius = 360 mm Länge über Puffer = 303 mm Click the image for a bigger view. Art.No. Delivery 36067 n-car, H0, Bnrz 451.4, 80 22-34 240-8, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36068 n-car, H0, Bnrz 450.3, 80 22-35 706-7, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36069 n-car, H0, AB nrz 418.4, 80 31-34 359-5, 1./2. Kl, GfF Ep. VI, blau-weiß, DC available 36070 n-car, H0, Bnrdzf 483.1, 80 80-35 163-0, Steuerwagen, GfF Ep. VI, blau-weiß, DC available 36477 n-car, H0, Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36478 n-car, H0, Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36482 n-car, H0, BDnrzf784, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau, DC available 36510 n-car, H0, Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36511 n-car, H0, Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36512 n-car, H0, AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36513 n-car, H0, Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau, DC available 36515 n-car, H0, Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot, DC available

Selling price: CHF 63.90 RRP CHF 68.90

On order, lead time to be confirmed

n coach H0 No. 778.1 2nd class DB Era IV DC
ESU 36478 Scale H0
n coach H0 No. 778.1 2nd class DB Era IV DC

n-car, H0, Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau, DC Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36478 Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36482 BDnrzf784.1, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau Art.No. 36510 Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36511 Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36512 AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36513 Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36515 Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot Prototype Model Picture Gallery Für den Einsatz im Nahverkehr aber auch zur Verstärkung von Schnellzügen beschaffte die Deutsche Bundesbahn DB zwischen 1959 und 1977 insgesamt mehr als 4800 Wagen in drei Grundrissformen: Reine 2. Klasse, 1. und 2. Klasse sowie Steuerwagen mit Gepäck- und 2.-Klasse-Großräumen. Der Wagenfamilie wurde der Gattungs-Buchstabe „n“ zugewiesen. Ein Prototypwagen besaß bereits diefür den Spitznamen „Silberlinge“ verantwortliche, nicht lackierte Außenhaut mit gebürstetem Pfauenaugenmuster. Der Verzicht auf eine Lackierung reduzierte das Gewicht um etwa zwei Tonnen. Mit einem Gesamtgewicht zwischen 27 und 30 t waren beispielsweise die Zweite-Klasse-Wagen mindestens 5t leichter, als die Vorkriegs-Eilzugwagen der Bauart 1936. Der zunächst eingebaute Achsgenerator-Typ D62 beschränkte die Höchstgeschwindigkeit auf 120 km/h. Die lauftechnisch zulässigen 140 km/h durften mit einer anderen Achsgenerator-Bauart oder von den elektrisch vom Triebfahrzeug versorgten Wagen gefahren werden. Die DB beschaffte 1969 insgesamt 180 Exemplare der Bauart Bnrzb724, die im Katastrophenfall einfach zu Lazarettwagen umgerüstet werden können. Markanter Unterschied zu den zuvor gefertigten Wagen ist der nahezu senkrechte Dachabschluss („Steildach“). Die ersten Steuerwagen besaßen am Führerstandsende eine Übergangsmöglichkeit zum nächsten Wagen, weshalb der Lokführer rechts des Ganges in einem zugigen kleinen Räumchen („Hasenkasten“) saß. Ab 1972 erhielt die DB Steuerwagen mit modernem „Karlsruher Kopf“. Um den Nahverkehr attraktiver zu gestalten, ließ die DB ab 1984 mehrere Garnituren innen modernisieren und außen in Kieselgrau-Orange lackieren und setzte sie mit passender 218 unter dem Produktnamen City-Bahn ein. Der Erfolg des Produkts bewog die DB, ab 1990 weitere Wagen durch neu bezogene Sitze, geänderte Gepäckablagen und einen eue Außenlackierung zu modernisieren. Es entstand eine Vielzahl unterschiedlicher Varianten der als Re-Design-Wagen bezeichneten Typen, die zunächst im damals aktuellen Minttürkis-Lichtgrau lackiert wurden. Ab 1993 erhielt die DB Steuerwagen mit an den Triebwagen VT 628 erinnern der Führerstandseite, dem „Wittenberger Kopf“. 2019, also 60 Jahre nach Indienststellung der ersten Silberlinge, befinden sich noch immer Wagen im täglichen Einsatz. Maßstäbliche H0-Modelle der n-Wagen Silberling Mehrfarbige Inneneinrichtung Separat eingesetzte Sitzbänke Steuerwagen mit separat schaltbarer Stirn-, Führerstand-, Gepäckraum- und Fahrgastraumbeleuchtung. Fernlicht beim Wittenberger Steuerwagen Gefederte Faltenbälge Freistehende Griffstangen Trittstufen an den Wagenenden und an den Einstiegen als durchbrochene Ätzteile Nachbildung der Wellenradscheiben bei silbernen, Nachbildung der glatten Scheibenräder bei verkehrsroten Wagen Mehrteilige Drehgestelle mit Nachbildung der Klotz- oder Scheibenbremsanlage Achslagerbleche und Halbachsen für reibungsfreie Achtpunkt-Stromabnahme Einfache Nachrüstung der Sitzwagen mit einer ESU-Innenbeleuchtung Bügelkupplung in kulissengeführtem Normschacht Optionaler AC-Radsatz unter der Art.-Nr. 41200 erhältlich Befahrbarer Mindestradius = 360 mm Länge über Puffer = 303 mm Click the image for a bigger view. Art.No. Delivery 36067 n-car, H0, Bnrz 451.4, 80 22-34 240-8, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36068 n-car, H0, Bnrz 450.3, 80 22-35 706-7, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36069 n-car, H0, AB nrz 418.4, 80 31-34 359-5, 1./2. Kl, GfF Ep. VI, blau-weiß, DC available 36070 n-car, H0, Bnrdzf 483.1, 80 80-35 163-0, Steuerwagen, GfF Ep. VI, blau-weiß, DC available 36477 n-car, H0, Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36478 n-car, H0, Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36482 n-car, H0, BDnrzf784, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau, DC available 36510 n-car, H0, Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36511 n-car, H0, Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36512 n-car, H0, AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36513 n-car, H0, Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau, DC available 36515 n-car, H0, Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot, DC available

Selling price: CHF 63.90 RRP CHF 68.90

On order, lead time to be confirmed

DB n-Wagen ABnrzb 704 80 31-34 359-5 1./2. Class coach, Era IV
ESU 36480 Scale H0
DB n-Wagen ABnrzb 704 80 31-34 359-5 1./2. Class coach, Era IV

ABnrzb 704, 80 31 - 34 359-5, 1st/2nd class, DB Era IV, DC Between 1959 and 1977, the German Federal Railway (DB) procured a total of more than 4,800 coaches in three floor plan variants for use on local services as well as to strengthen express trains: pure second class, first and second class, and driving trailers with luggage and second-class high-capacity compartments. The coach family was assigned the class letter "n". A prototype coach already featured the unpainted exterior with a brushed peacock-eye pattern that was responsible for the nickname "Silberlinge" (silver coins). Dispensing with a coat of paint reduced the weight by around two tonnes. With a total weight of between 27 and 30 t, the second-class coaches, for example, were at least 5 t lighter than the pre-war express coaches of the 1936 type. The axle generator type D62 initially fitted limited the maximum speed to 120 km/h. The 140 km/h permitted by the running gear could be achieved with a different type of axle generator or by coaches supplied electrically from the locomotive. In 1969, the DB procured a total of 180 examples of the Bnrzb724 type, which can easily be converted into hospital coaches in the event of a disaster. A notable difference from the coaches built previously is the almost vertical roof end ("steep roof"). The first driving trailers had a gangway connection to the next coach at the cab end, which meant that the driver sat to the right of the corridor in a draughty little compartment (the "Hasenkasten", or rabbit hutch). From 1972, the DB received driving trailers with a modern "Karlsruher Kopf" front end. To make local services more attractive, from 1984 the DB had several sets modernised internally and painted externally in pebble grey and orange, and operated them with a matching Class 218 locomotive under the product name City-Bahn. The success of the product led the DB, from 1990, to modernise further coaches with newly upholstered seats, revised luggage racks, and a new exterior livery. A large number of different variants emerged of the types known as Re-Design coaches, which were initially painted in the then-current mint turquoise and light grey. From 1993, the DB received driving trailers with a cab front reminiscent of the VT 628 railcar, the "Wittenberger Kopf". In 2019, sixty years after the first Silberlinge entered service, coaches of this type are still in daily use. True-to-scale H0 models of the n-coach Silberling Multicoloured interior details Separately fitted bench seats Driving trailer with separately switchable head lamp, cab, luggage compartment and Interior lighting. Main beam headlights on the Wittenberger driving trailer Sprung bellows Separately applied handrails Steps at the coach ends and at the doorways as open-etched parts Reproduction of the spoked wheel discs for silver, reproduction of the plain Disc wheels on traffic-red wagons Multi-part bogies with reproduction of the block or disc brake system Axlebox plates and half-axles for friction-free eight-point current collection Simple retrofitting of the passenger coaches with an ESU interior lighting Coupler bow in guided NEM pocket Optional AC wheelset available under item no. 41200 The minimum radius for operation is 360 mm Length over the buffers = 303 mm

Selling price: CHF 63.90 RRP CHF 68.90

On order, lead time to be confirmed

n-coach H0 ABnrzb772.2 Café DB Ep.IV DC
ESU 36481 Scale H0
n-coach H0 ABnrzb772.2 Café DB Ep.IV DC

ABnrzb772.2, 31-34 021-1, Café, DB Era IV, orange, light grey Between 1959 and 1977, the German Federal Railway (DB) procured a total of more than 4,800 coaches in three floor plan variants for use on local services as well as to strengthen express trains: pure second class, first and second class, and driving trailers with luggage and second-class high-capacity compartments. The coach family was assigned the class letter "n". A prototype coach already featured the unpainted exterior with a brushed peacock-eye pattern that was responsible for the nickname "Silberlinge" (silver coins). Dispensing with a coat of paint reduced the weight by around two tonnes. With a total weight of between 27 and 30 t, the second-class coaches, for example, were at least 5 t lighter than the pre-war fast train coaches of the 1936 type. The axle generator type D62 initially fitted limited the maximum speed to 120 km/h. The 140 km/h permitted by the running gear could be achieved with a different type of axle generator or by coaches supplied electrically from the locomotive. In 1969, the DB procured a total of 180 examples of the Bnrzb724 type, which can easily be converted into hospital trains in the event of a disaster. A notable difference from the coaches built previously is the almost vertical roof end ("steep roof"). The first driving trailers had a gangway connection to the next coach at the cab end, which meant that the driver sat to the right of the corridor in a draughty little compartment (the "Hasenkasten", or rabbit hutch). From 1972, the DB received driving trailers with a modern "Karlsruher Kopf" front end. To make local services more attractive, from 1984 the DB had several sets modernised internally and painted externally in pebble grey and orange, and operated them with a matching Class 218 locomotive under the product name City-Bahn. The success of the product led the DB, from 1990, to modernise further coaches with newly upholstered seats, revised luggage racks, and a new exterior livery. A large number of different variants emerged of the types known as Re-Design coaches, which were initially painted in the then-current mint turquoise and light grey. From 1993, the DB received driving trailers with a cab front end reminiscent of the VT 628 railcar, known as the "Wittenberger Kopf". In 2019, sixty years after the first Silberlinge entered service, coaches of this type are still in daily use. True-to-scale H0 models of the n-coach Silberling Multi-coloured interior details Separately fitted bench seats Driving trailer with separately switchable head lamp, cab, luggage compartment and Interior lighting. Main beam headlights on the Wittenberger driving trailer Sprung bellows Separately applied handrails Steps at the coach ends and at the doorways as open-etched parts Reproduction of the spoked wheel discs for silver, reproduction of the plain Disc wheels on traffic-red wagons Multi-part bogies with reproduction of the block or disc brake system Axlebox plates and half-axles for friction-free eight-point current collection Simple retrofitting of the passenger coaches with an ESU interior lighting Coupler bow in guided NEM pocket Optional AC wheelset available under item no. 41200 The minimum radius for operation is 360 mm Length over the buffers = 303 mm

Selling price: CHF 63.90 RRP CHF 68.90

On order, lead time to be confirmed

n-Wagon H0 BDnrzf784.1 Driving trailer DB Era IV DC
ESU 36482 Scale H0
n-Wagon H0 BDnrzf784.1 Driving trailer DB Era IV DC

n-car, H0, BDnrzf784, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau, DC Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36478 Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36482 BDnrzf784.1, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau Art.No. 36510 Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36511 Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36512 AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36513 Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36515 Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot Prototype Model Picture Gallery Für den Einsatz im Nahverkehr aber auch zur Verstärkung von Schnellzügen beschaffte die Deutsche Bundesbahn DB zwischen 1959 und 1977 insgesamt mehr als 4800 Wagen in drei Grundrissformen: Reine 2. Klasse, 1. und 2. Klasse sowie Steuerwagen mit Gepäck- und 2.-Klasse-Großräumen. Der Wagenfamilie wurde der Gattungs-Buchstabe „n“ zugewiesen. Ein Prototypwagen besaß bereits diefür den Spitznamen „Silberlinge“ verantwortliche, nicht lackierte Außenhaut mit gebürstetem Pfauenaugenmuster. Der Verzicht auf eine Lackierung reduzierte das Gewicht um etwa zwei Tonnen. Mit einem Gesamtgewicht zwischen 27 und 30 t waren beispielsweise die Zweite-Klasse-Wagen mindestens 5t leichter, als die Vorkriegs-Eilzugwagen der Bauart 1936. Der zunächst eingebaute Achsgenerator-Typ D62 beschränkte die Höchstgeschwindigkeit auf 120 km/h. Die lauftechnisch zulässigen 140 km/h durften mit einer anderen Achsgenerator-Bauart oder von den elektrisch vom Triebfahrzeug versorgten Wagen gefahren werden. Die DB beschaffte 1969 insgesamt 180 Exemplare der Bauart Bnrzb724, die im Katastrophenfall einfach zu Lazarettwagen umgerüstet werden können. Markanter Unterschied zu den zuvor gefertigten Wagen ist der nahezu senkrechte Dachabschluss („Steildach“). Die ersten Steuerwagen besaßen am Führerstandsende eine Übergangsmöglichkeit zum nächsten Wagen, weshalb der Lokführer rechts des Ganges in einem zugigen kleinen Räumchen („Hasenkasten“) saß. Ab 1972 erhielt die DB Steuerwagen mit modernem „Karlsruher Kopf“. Um den Nahverkehr attraktiver zu gestalten, ließ die DB ab 1984 mehrere Garnituren innen modernisieren und außen in Kieselgrau-Orange lackieren und setzte sie mit passender 218 unter dem Produktnamen City-Bahn ein. Der Erfolg des Produkts bewog die DB, ab 1990 weitere Wagen durch neu bezogene Sitze, geänderte Gepäckablagen und einen eue Außenlackierung zu modernisieren. Es entstand eine Vielzahl unterschiedlicher Varianten der als Re-Design-Wagen bezeichneten Typen, die zunächst im damals aktuellen Minttürkis-Lichtgrau lackiert wurden. Ab 1993 erhielt die DB Steuerwagen mit an den Triebwagen VT 628 erinnern der Führerstandseite, dem „Wittenberger Kopf“. 2019, also 60 Jahre nach Indienststellung der ersten Silberlinge, befinden sich noch immer Wagen im täglichen Einsatz. Maßstäbliche H0-Modelle der n-Wagen Silberling Mehrfarbige Inneneinrichtung Separat eingesetzte Sitzbänke Steuerwagen mit separat schaltbarer Stirn-, Führerstand-, Gepäckraum- und Fahrgastraumbeleuchtung. Fernlicht beim Wittenberger Steuerwagen Gefederte Faltenbälge Freistehende Griffstangen Trittstufen an den Wagenenden und an den Einstiegen als durchbrochene Ätzteile Nachbildung der Wellenradscheiben bei silbernen, Nachbildung der glatten Scheibenräder bei verkehrsroten Wagen Mehrteilige Drehgestelle mit Nachbildung der Klotz- oder Scheibenbremsanlage Achslagerbleche und Halbachsen für reibungsfreie Achtpunkt-Stromabnahme Einfache Nachrüstung der Sitzwagen mit einer ESU-Innenbeleuchtung Bügelkupplung in kulissengeführtem Normschacht Optionaler AC-Radsatz unter der Art.-Nr. 41200 erhältlich Befahrbarer Mindestradius = 360 mm Länge über Puffer = 303 mm Click the image for a bigger view. Art.No. Delivery 36067 n-car, H0, Bnrz 451.4, 80 22-34 240-8, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36068 n-car, H0, Bnrz 450.3, 80 22-35 706-7, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36069 n-car, H0, AB nrz 418.4, 80 31-34 359-5, 1./2. Kl, GfF Ep. VI, blau-weiß, DC available 36070 n-car, H0, Bnrdzf 483.1, 80 80-35 163-0, Steuerwagen, GfF Ep. VI, blau-weiß, DC available 36477 n-car, H0, Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36478 n-car, H0, Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36482 n-car, H0, BDnrzf784, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau, DC available 36510 n-car, H0, Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36511 n-car, H0, Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36512 n-car, H0, AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36513 n-car, H0, Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau, DC available 36515 n-car, H0, Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot, DC available

Selling price: CHF 113.00 RRP CHF 125.00

On order, lead time to be confirmed

n-coach H0 no. 725 106-1 DB Ep.IV DC
ESU 36483 Scale H0
n-coach H0 no. 725 106-1 DB Ep.IV DC

Bnrz 725, 22-34 106-1, 2nd class, DB Era IV, silver Between 1959 and 1977, the German Federal Railway (DB) procured a total of more than 4,800 coaches in three floor-plan configurations for use on local services as well as to strengthen express trains: pure second class, first and second class, and driving trailers with luggage and second-class high-capacity compartments. The coach family was assigned the class letter "n". A prototype coach already featured the unpainted exterior with a brushed peacock-eye pattern that was responsible for the nickname "Silberlinge" (silver coins). Dispensing with a coat of paint reduced the weight by around two tonnes. With a total weight of between 27 and 30 t, the second-class coaches, for example, were at least 5 t lighter than the pre-war fast coaches of the 1936 type. The axle generator type D62 initially fitted limited the maximum speed to 120 km/h. The 140 km/h permitted by the running gear could be achieved with a different type of axle generator or by coaches supplied electrically from the traction unit. In 1969, the DB procured a total of 180 examples of the Bnrzb724 type, which can easily be converted into hospital trains in the event of a disaster. A notable difference from the coaches built previously is the almost vertical roof end ("steep roof"). The first driving trailers had a gangway connection to the next coach at the cab end, which meant that the driver sat to the right of the corridor in a draughty little compartment (the "Hasenkasten", or rabbit hutch). From 1972, the DB received driving trailers with a modern "Karlsruher Kopf" front end. To make local services more attractive, from 1984 the DB had several sets modernised internally and painted externally in pebble grey and orange, and operated them with a matching Class 218 locomotive under the product name City-Bahn. The success of the product led the DB, from 1990, to modernise further coaches with newly upholstered seats, revised luggage racks, and a new exterior livery. A large number of different variants emerged of the types known as Re-Design coaches, which were initially painted in the then-current mint turquoise and light grey. From 1993, the DB received driving trailers with a cab end reminiscent of the VT 628 railcar, known as the "Wittenberger Kopf". In 2019, sixty years after the first Silberlinge entered service, coaches of this type are still in daily use. True-to-scale H0 models of the n-coach Silberling Multicoloured interior details Separately fitted bench seats Driving trailer with separately switchable head lamp, cab, luggage compartment and Interior lighting. Main beam headlights on the Wittenberger driving trailer Sprung bellows Separately applied handrails Steps at the coach ends and at the doorways as open-etched parts Reproduction of the spoked wheel discs for silver, reproduction of the plain Disc wheels on traffic-red wagons Multi-part bogies with reproduction of the block or disc brake system Axlebox plates and half-axles for friction-free eight-point current collection Simple retrofitting of the passenger coaches with an ESU interior lighting Coupler bow in guided NEM pocket Optional AC wheelset available under item no. 41200 The minimum radius for operation is 360 mm Length over the buffers = 303 mm

Selling price: CHF 63.90 RRP CHF 68.90

On order, lead time to be confirmed

n-Wagon H0 No. 451.4 112-9 DB Era VI DC
ESU 36510 Scale H0
n-Wagon H0 No. 451.4 112-9 DB Era VI DC

n-car, H0, Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36478 Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36482 BDnrzf784.1, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau Art.No. 36510 Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36511 Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36512 AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36513 Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36515 Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot Prototype Model Picture Gallery Für den Einsatz im Nahverkehr aber auch zur Verstärkung von Schnellzügen beschaffte die Deutsche Bundesbahn DB zwischen 1959 und 1977 insgesamt mehr als 4800 Wagen in drei Grundrissformen: Reine 2. Klasse, 1. und 2. Klasse sowie Steuerwagen mit Gepäck- und 2.-Klasse-Großräumen. Der Wagenfamilie wurde der Gattungs-Buchstabe „n“ zugewiesen. Ein Prototypwagen besaß bereits diefür den Spitznamen „Silberlinge“ verantwortliche, nicht lackierte Außenhaut mit gebürstetem Pfauenaugenmuster. Der Verzicht auf eine Lackierung reduzierte das Gewicht um etwa zwei Tonnen. Mit einem Gesamtgewicht zwischen 27 und 30 t waren beispielsweise die Zweite-Klasse-Wagen mindestens 5t leichter, als die Vorkriegs-Eilzugwagen der Bauart 1936. Der zunächst eingebaute Achsgenerator-Typ D62 beschränkte die Höchstgeschwindigkeit auf 120 km/h. Die lauftechnisch zulässigen 140 km/h durften mit einer anderen Achsgenerator-Bauart oder von den elektrisch vom Triebfahrzeug versorgten Wagen gefahren werden. Die DB beschaffte 1969 insgesamt 180 Exemplare der Bauart Bnrzb724, die im Katastrophenfall einfach zu Lazarettwagen umgerüstet werden können. Markanter Unterschied zu den zuvor gefertigten Wagen ist der nahezu senkrechte Dachabschluss („Steildach“). Die ersten Steuerwagen besaßen am Führerstandsende eine Übergangsmöglichkeit zum nächsten Wagen, weshalb der Lokführer rechts des Ganges in einem zugigen kleinen Räumchen („Hasenkasten“) saß. Ab 1972 erhielt die DB Steuerwagen mit modernem „Karlsruher Kopf“. Um den Nahverkehr attraktiver zu gestalten, ließ die DB ab 1984 mehrere Garnituren innen modernisieren und außen in Kieselgrau-Orange lackieren und setzte sie mit passender 218 unter dem Produktnamen City-Bahn ein. Der Erfolg des Produkts bewog die DB, ab 1990 weitere Wagen durch neu bezogene Sitze, geänderte Gepäckablagen und einen eue Außenlackierung zu modernisieren. Es entstand eine Vielzahl unterschiedlicher Varianten der als Re-Design-Wagen bezeichneten Typen, die zunächst im damals aktuellen Minttürkis-Lichtgrau lackiert wurden. Ab 1993 erhielt die DB Steuerwagen mit an den Triebwagen VT 628 erinnern der Führerstandseite, dem „Wittenberger Kopf“. 2019, also 60 Jahre nach Indienststellung der ersten Silberlinge, befinden sich noch immer Wagen im täglichen Einsatz. Maßstäbliche H0-Modelle der n-Wagen Silberling Mehrfarbige Inneneinrichtung Separat eingesetzte Sitzbänke Steuerwagen mit separat schaltbarer Stirn-, Führerstand-, Gepäckraum- und Fahrgastraumbeleuchtung. Fernlicht beim Wittenberger Steuerwagen Gefederte Faltenbälge Freistehende Griffstangen Trittstufen an den Wagenenden und an den Einstiegen als durchbrochene Ätzteile Nachbildung der Wellenradscheiben bei silbernen, Nachbildung der glatten Scheibenräder bei verkehrsroten Wagen Mehrteilige Drehgestelle mit Nachbildung der Klotz- oder Scheibenbremsanlage Achslagerbleche und Halbachsen für reibungsfreie Achtpunkt-Stromabnahme Einfache Nachrüstung der Sitzwagen mit einer ESU-Innenbeleuchtung Bügelkupplung in kulissengeführtem Normschacht Optionaler AC-Radsatz unter der Art.-Nr. 41200 erhältlich Befahrbarer Mindestradius = 360 mm Länge über Puffer = 303 mm Click the image for a bigger view. Art.No. Delivery 36067 n-car, H0, Bnrz 451.4, 80 22-34 240-8, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36068 n-car, H0, Bnrz 450.3, 80 22-35 706-7, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36069 n-car, H0, AB nrz 418.4, 80 31-34 359-5, 1./2. Kl, GfF Ep. VI, blau-weiß, DC available 36070 n-car, H0, Bnrdzf 483.1, 80 80-35 163-0, Steuerwagen, GfF Ep. VI, blau-weiß, DC available 36477 n-car, H0, Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36478 n-car, H0, Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36482 n-car, H0, BDnrzf784, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau, DC available 36510 n-car, H0, Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36511 n-car, H0, Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36512 n-car, H0, AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36513 n-car, H0, Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau, DC available 36515 n-car, H0, Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot, DC available

Selling price: CHF 63.90 RRP CHF 68.90

On order, lead time to be confirmed

n coach H0 no. 450.3 927-9 DB Ep. VI DC
ESU 36511 Scale H0
n coach H0 no. 450.3 927-9 DB Ep. VI DC

n-car, H0, Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36478 Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36482 BDnrzf784.1, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau Art.No. 36510 Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36511 Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36512 AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36513 Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36515 Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot Prototype Model Picture Gallery Für den Einsatz im Nahverkehr aber auch zur Verstärkung von Schnellzügen beschaffte die Deutsche Bundesbahn DB zwischen 1959 und 1977 insgesamt mehr als 4800 Wagen in drei Grundrissformen: Reine 2. Klasse, 1. und 2. Klasse sowie Steuerwagen mit Gepäck- und 2.-Klasse-Großräumen. Der Wagenfamilie wurde der Gattungs-Buchstabe „n“ zugewiesen. Ein Prototypwagen besaß bereits diefür den Spitznamen „Silberlinge“ verantwortliche, nicht lackierte Außenhaut mit gebürstetem Pfauenaugenmuster. Der Verzicht auf eine Lackierung reduzierte das Gewicht um etwa zwei Tonnen. Mit einem Gesamtgewicht zwischen 27 und 30 t waren beispielsweise die Zweite-Klasse-Wagen mindestens 5t leichter, als die Vorkriegs-Eilzugwagen der Bauart 1936. Der zunächst eingebaute Achsgenerator-Typ D62 beschränkte die Höchstgeschwindigkeit auf 120 km/h. Die lauftechnisch zulässigen 140 km/h durften mit einer anderen Achsgenerator-Bauart oder von den elektrisch vom Triebfahrzeug versorgten Wagen gefahren werden. Die DB beschaffte 1969 insgesamt 180 Exemplare der Bauart Bnrzb724, die im Katastrophenfall einfach zu Lazarettwagen umgerüstet werden können. Markanter Unterschied zu den zuvor gefertigten Wagen ist der nahezu senkrechte Dachabschluss („Steildach“). Die ersten Steuerwagen besaßen am Führerstandsende eine Übergangsmöglichkeit zum nächsten Wagen, weshalb der Lokführer rechts des Ganges in einem zugigen kleinen Räumchen („Hasenkasten“) saß. Ab 1972 erhielt die DB Steuerwagen mit modernem „Karlsruher Kopf“. Um den Nahverkehr attraktiver zu gestalten, ließ die DB ab 1984 mehrere Garnituren innen modernisieren und außen in Kieselgrau-Orange lackieren und setzte sie mit passender 218 unter dem Produktnamen City-Bahn ein. Der Erfolg des Produkts bewog die DB, ab 1990 weitere Wagen durch neu bezogene Sitze, geänderte Gepäckablagen und einen eue Außenlackierung zu modernisieren. Es entstand eine Vielzahl unterschiedlicher Varianten der als Re-Design-Wagen bezeichneten Typen, die zunächst im damals aktuellen Minttürkis-Lichtgrau lackiert wurden. Ab 1993 erhielt die DB Steuerwagen mit an den Triebwagen VT 628 erinnern der Führerstandseite, dem „Wittenberger Kopf“. 2019, also 60 Jahre nach Indienststellung der ersten Silberlinge, befinden sich noch immer Wagen im täglichen Einsatz. Maßstäbliche H0-Modelle der n-Wagen Silberling Mehrfarbige Inneneinrichtung Separat eingesetzte Sitzbänke Steuerwagen mit separat schaltbarer Stirn-, Führerstand-, Gepäckraum- und Fahrgastraumbeleuchtung. Fernlicht beim Wittenberger Steuerwagen Gefederte Faltenbälge Freistehende Griffstangen Trittstufen an den Wagenenden und an den Einstiegen als durchbrochene Ätzteile Nachbildung der Wellenradscheiben bei silbernen, Nachbildung der glatten Scheibenräder bei verkehrsroten Wagen Mehrteilige Drehgestelle mit Nachbildung der Klotz- oder Scheibenbremsanlage Achslagerbleche und Halbachsen für reibungsfreie Achtpunkt-Stromabnahme Einfache Nachrüstung der Sitzwagen mit einer ESU-Innenbeleuchtung Bügelkupplung in kulissengeführtem Normschacht Optionaler AC-Radsatz unter der Art.-Nr. 41200 erhältlich Befahrbarer Mindestradius = 360 mm Länge über Puffer = 303 mm Click the image for a bigger view. Art.No. Delivery 36067 n-car, H0, Bnrz 451.4, 80 22-34 240-8, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36068 n-car, H0, Bnrz 450.3, 80 22-35 706-7, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36069 n-car, H0, AB nrz 418.4, 80 31-34 359-5, 1./2. Kl, GfF Ep. VI, blau-weiß, DC available 36070 n-car, H0, Bnrdzf 483.1, 80 80-35 163-0, Steuerwagen, GfF Ep. VI, blau-weiß, DC available 36477 n-car, H0, Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36478 n-car, H0, Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36482 n-car, H0, BDnrzf784, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau, DC available 36510 n-car, H0, Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36511 n-car, H0, Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36512 n-car, H0, AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36513 n-car, H0, Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau, DC available 36515 n-car, H0, Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot, DC available

Selling price: CHF 63.90 RRP CHF 68.90

On order, lead time to be confirmed

n-Wagon H0 ABnrz 418.4 074-0 DB Ep.VI DC
ESU 36512 Scale H0
n-Wagon H0 ABnrz 418.4 074-0 DB Ep.VI DC

n-car, H0, AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36478 Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau Art.No. 36482 BDnrzf784.1, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau Art.No. 36510 Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36511 Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36512 AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36513 Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau Art.No. 36515 Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot Prototype Model Picture Gallery Für den Einsatz im Nahverkehr aber auch zur Verstärkung von Schnellzügen beschaffte die Deutsche Bundesbahn DB zwischen 1959 und 1977 insgesamt mehr als 4800 Wagen in drei Grundrissformen: Reine 2. Klasse, 1. und 2. Klasse sowie Steuerwagen mit Gepäck- und 2.-Klasse-Großräumen. Der Wagenfamilie wurde der Gattungs-Buchstabe „n“ zugewiesen. Ein Prototypwagen besaß bereits diefür den Spitznamen „Silberlinge“ verantwortliche, nicht lackierte Außenhaut mit gebürstetem Pfauenaugenmuster. Der Verzicht auf eine Lackierung reduzierte das Gewicht um etwa zwei Tonnen. Mit einem Gesamtgewicht zwischen 27 und 30 t waren beispielsweise die Zweite-Klasse-Wagen mindestens 5t leichter, als die Vorkriegs-Eilzugwagen der Bauart 1936. Der zunächst eingebaute Achsgenerator-Typ D62 beschränkte die Höchstgeschwindigkeit auf 120 km/h. Die lauftechnisch zulässigen 140 km/h durften mit einer anderen Achsgenerator-Bauart oder von den elektrisch vom Triebfahrzeug versorgten Wagen gefahren werden. Die DB beschaffte 1969 insgesamt 180 Exemplare der Bauart Bnrzb724, die im Katastrophenfall einfach zu Lazarettwagen umgerüstet werden können. Markanter Unterschied zu den zuvor gefertigten Wagen ist der nahezu senkrechte Dachabschluss („Steildach“). Die ersten Steuerwagen besaßen am Führerstandsende eine Übergangsmöglichkeit zum nächsten Wagen, weshalb der Lokführer rechts des Ganges in einem zugigen kleinen Räumchen („Hasenkasten“) saß. Ab 1972 erhielt die DB Steuerwagen mit modernem „Karlsruher Kopf“. Um den Nahverkehr attraktiver zu gestalten, ließ die DB ab 1984 mehrere Garnituren innen modernisieren und außen in Kieselgrau-Orange lackieren und setzte sie mit passender 218 unter dem Produktnamen City-Bahn ein. Der Erfolg des Produkts bewog die DB, ab 1990 weitere Wagen durch neu bezogene Sitze, geänderte Gepäckablagen und einen eue Außenlackierung zu modernisieren. Es entstand eine Vielzahl unterschiedlicher Varianten der als Re-Design-Wagen bezeichneten Typen, die zunächst im damals aktuellen Minttürkis-Lichtgrau lackiert wurden. Ab 1993 erhielt die DB Steuerwagen mit an den Triebwagen VT 628 erinnern der Führerstandseite, dem „Wittenberger Kopf“. 2019, also 60 Jahre nach Indienststellung der ersten Silberlinge, befinden sich noch immer Wagen im täglichen Einsatz. Maßstäbliche H0-Modelle der n-Wagen Silberling Mehrfarbige Inneneinrichtung Separat eingesetzte Sitzbänke Steuerwagen mit separat schaltbarer Stirn-, Führerstand-, Gepäckraum- und Fahrgastraumbeleuchtung. Fernlicht beim Wittenberger Steuerwagen Gefederte Faltenbälge Freistehende Griffstangen Trittstufen an den Wagenenden und an den Einstiegen als durchbrochene Ätzteile Nachbildung der Wellenradscheiben bei silbernen, Nachbildung der glatten Scheibenräder bei verkehrsroten Wagen Mehrteilige Drehgestelle mit Nachbildung der Klotz- oder Scheibenbremsanlage Achslagerbleche und Halbachsen für reibungsfreie Achtpunkt-Stromabnahme Einfache Nachrüstung der Sitzwagen mit einer ESU-Innenbeleuchtung Bügelkupplung in kulissengeführtem Normschacht Optionaler AC-Radsatz unter der Art.-Nr. 41200 erhältlich Befahrbarer Mindestradius = 360 mm Länge über Puffer = 303 mm Click the image for a bigger view. Art.No. Delivery 36067 n-car, H0, Bnrz 451.4, 80 22-34 240-8, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36068 n-car, H0, Bnrz 450.3, 80 22-35 706-7, 2. Kl, GfF Ep. VI, blau-weiß, DC available 36069 n-car, H0, AB nrz 418.4, 80 31-34 359-5, 1./2. Kl, GfF Ep. VI, blau-weiß, DC available 36070 n-car, H0, Bnrdzf 483.1, 80 80-35 163-0, Steuerwagen, GfF Ep. VI, blau-weiß, DC available 36477 n-car, H0, Bnrzb778.1, 22-34 021-2, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36478 n-car, H0, Bnrzb778.1, 22-34 004-8, 2. Kl., DB Ep. IV, orange, lichtgrau, DC available 36482 n-car, H0, BDnrzf784, 82-34 265-2, Steuerwagen, DB Ep. IV, orange, lichtgrau, DC available 36510 n-car, H0, Bnrz 451.4, 22-34-112-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36511 n-car, H0, Bnrz 450.3, 22-35 927-9, 2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36512 n-car, H0, AB nrz 418.4, 31-34 074-0, 1./2. Kl, DB Ep. VI, lichtgrau/gelb/grau, DC available 36513 n-car, H0, Bnrdzf 483.1, 80-35 188-7, Steuerwagen, DB Ep. VI, lichtgrau/gelb/grau, DC available 36515 n-car, H0, Bnrz 450.3, 22-35 932-9, 2. Kl, DB Ep. V/VI, verkehrsrot, DC available

Selling price: CHF 63.90 RRP CHF 68.90

On order, lead time to be confirmed