Exclusive dealer for Switzerland
I-Track, the structure of your layout, ready to assemble
Baseboards, track formations, track beds, helices and CarMotion roads: the plywood system by Hacker Model, assembled without any carpentry. All items are available to order.
- 843items available to order
- 4scales: H0, TT, N and Märklin C
- 6 and 16 cmthe two baseboard heights

What makes I-Track
- A precision system: Hacker Model Production, in Řevničov in the Czech Republic, designs I-Track as the basic structure of your layout: baseboards, frames and track formations cut to fit together.
- On several levels: baseboards 6 and 16 cm high, baseboards with a 26 cm hidden station, Rondela helices and ramps to go from one level to the next.
- For your track: track beds and segments for H0, TT, N and Märklin C track, Rondela helices for Märklin, Roco, Piko, Peco, Tillig, Fleischmann and Minitrix.
- CarMotion roads: road beds and asphalt plates for the Viessmann CarMotion system in H0, up to the complete module with its roads.
- Portable modules: modules on aluminium legs, quick to set up, easy to transport and store, and understructures in planed wood, 66 or 76 cm high.
- To order, with advice: online ordering coming soon. Until then, we advise you, order and deliver, or you collect your order in Rolle.
Catalogue to download
The whole system, layout plans and dimensions, in the manufacturer's documents.
- I-Track catalogue 2024: 40 pages, in German, English and Czech (PDF, 15.5 Mo)
- New for autumn 2026: 4 pages on CarMotion, in German and English (PDF, 3.5 Mo)
The I-Track families
Baseboards and structure
74 itemsBaseboards 6 cmThe base of the layout, rectangular or triangular, loose or already glued.See the items
55 itemsBaseboards 16 cmTaller, to house points, motors and wiring under the track.See the items
14 itemsBaseboards for turntablesCut for Roco, Fleischmann, Trix and Märklin turntables.See the items
24 itemsBaseboards with hidden stationA hidden station under the scenic level, 26 cm high.See the items
17 itemsSide wallsTransparent or solid walls to close baseboards and hidden station.See the items
65 itemsWooden understructuresPlaned wood, 66 or 76 cm high, to stand the baseboards on.See the items
22 itemsModules and control panelsModules on legs, starter boards for table layouts, control panels.See the itemsThe track formation
74 itemsH0 track formation segmentsStraights, curves, bridges and ramps to raise the H0 track.See the items
40 itemsSegments for Märklin CThe same formation, to the geometry of Märklin C track.See the items
52 itemsTT track formation segmentsStraights, curves and bridges to TT track radii.See the items
46 itemsN track formation segmentsStraights, curves and bridges to N track radii.See the items
56 itemsTrack bedsUnder the track, for H0, TT, N and Märklin C, straight and curved.See the items
76 itemsRamps and embankmentsRamps, embankments and track underlays for gentle gradients.See the items
82 itemsRondela helicesHelices to change level in a small space, from N to H0.See the items
90 itemsTemplates, spacers and postsLaying templates, spacers for parallel tracks and posts.See the itemsCarMotion roads
76 itemsCarMotion road bedsThe road elements that guide the CarMotion vehicles.See the items
34 itemsAsphalt road platesThe finished road surface, with or without a zebra crossing.See the items
44 itemsCarMotion segments and modulesMounting posts, segments, holders for the charger, complete modules.See the itemsAll I-Track items
I-Track segments are the ideal trackbed construction elements, letting you bridge any terrain shape and easily change levels on your layout. The included modular supports let you adjust the gradient or slope to your needs, for example for entries and exits to a hidden/shadow station. Thanks to their special construction with two sub-beams, these laser-cut segments made from high-quality plywood are very rigid, bend-resistant and load-bearing, and are supplied as a kit with an illustrated assembly manual.
On order
RONDELA is the I-Track helix system for N, TT and H0 gauges, letting you overcome height differences of any size in a minimal footprint, for example for entries and exits of a hidden/shadow station or to change terrain levels. Thanks to its special construction from I-Track segments, Rondela is extremely stable, rigid and load-bearing, connects seamlessly and offers, on the upper connecting segment, a smooth gradient transition without a troublesome kink; a protective railing can optionally be fitted. This complete kit is the single-track base circle with a radius of 310 mm and 360°, buildable clockwise or counter-clockwise.
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius R 310 mm, 1-track, add-on circle, 6 segments = 1 circle, build height: 85 mm, segment width: 60 mm, outer gradient: 4.1%, outer diameter: 680 mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius R 310 mm, 1-track, base circle, 9 segments = 1 1/2 circles, build height: 122.5 mm, segment width: 60 mm, outer gradient: 4.1%, outer diameter: 680 mm
On order
I-Track segments are the perfect trackbed building elements, letting you bridge any terrain shape and easily change levels on your layout. Thanks to their special construction with two longitudinal beams, they are very stiff, bend-resistant and load-bearing. This TT curve segment is 2-track with a radius of 310/353mm, 30° and width B.103, supplied as a set of 3 pieces.
On order
Track bed elements with a thickness of 5 mm, double track, radius 310/353 mm. They are made of a high quality, sturdy yet flexible material that ensures smooth, vibration-free train operation. The pack contains 12 identical elements.
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius 310/353, 1- or 2-track, base circle, 6 segments = 1 circle, build height: 85 mm, segment width: 103 mm, inner gradient: 4.1%, outer gradient: 3.6%, outer diameter: 766 mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius 310/353 mm, 1- or 2-track, add-on circle, 6 segments = 1 circle, build height: 85 mm, segment width: 103 mm, inner gradient: 4.1%, outer gradient: 3.6%, outer diameter: 766 mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius 310/353 mm, 1- or 2-track, base circle, 9 segments = 1 1/2 circles, build height: 122.5 mm, segment width: 103 mm, inner gradient: 4.1%, outer gradient: 3.6%, outer diameter: 766 mm
On order
I-Track segments are the ideal trackbed construction elements, allowing any terrain shape to be bridged and layout levels to be changed easily. Thanks to their special construction with two supporting beams, they are very rigid, flexurally stiff and load-bearing. The segments are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions.
On order
I-Track segments are the ideal trackbed construction elements, allowing any terrain shape to be bridged and layout levels to be changed easily. Thanks to their special construction with two supporting beams, they are very rigid, flexurally stiff and load-bearing. The segments are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions.
On order
Track bed elements with a thickness of 5 mm (H0, TT) or 3 mm (N) are available straight and curved in various radii, matching the I-Track segments. They are made from a high-quality, stable yet flexible material that ensures quiet, vibration-free train operation without disturbing noise. The elements can be cut with a sharp knife and glued with hot-melt adhesive or Hacker CA glue; this pack contains 12 identical elements.
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius R 353 mm, 1-track, base circle, 6 segments = 1 circle, build height: 85 mm, segment width: 60 mm, outer gradient: 3.6%, outer diameter: 766 mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius R 353 mm, 1-track, add-on circle, 6 segments = 1 circle, build height: 85 mm, segment width: 60 mm, outer gradient: 3.6%, outer diameter: 766 mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius R 353 mm, 1-track, base circle, 9 segments = 1 1/2 circles, build height: 122.5 mm, segment width: 60 mm, outer gradient: 3.6%, outer diameter: 766 mm
On order
I-Track segments are trackbed construction elements that let you span any terrain shape and change levels on a layout. Thanks to their special construction with two sub-beams, they are very rigid, bending-resistant and load-bearing, and are also well suited to rib/former construction. The segments, laser-cut from high-quality plywood, are supplied as a kit with an illustrated assembly guide.
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius 353/396, 1- or 2-track, base circle, 6 segments = 1 circle, build height: 85 mm, segment width: 103 mm, inner gradient: %, outer gradient: %, outer diameter: mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius 353/396 mm, 1- or 2-track, add-on circle, 6 segments = 1 circle, build height: 85 mm, segment width: 103 mm, inner gradient: %, outer gradient: %, outer diameter: mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius 353/396 mm, 1- or 2-track, base circle, 9 segments = 1 1/2 circles, build height: 122.5 mm, segment width: 103 mm, inner gradient: %, outer gradient: %, outer diameter: mm
On order
I-Track segments are trackbed construction elements that let you span any terrain shape and change levels on a layout. Thanks to their special construction with two sub-beams, they are very rigid, bending-resistant and load-bearing, and are also well suited to rib/former construction. The segments, laser-cut from high-quality plywood, are supplied as a kit with an illustrated assembly guide.
On order
Curved track bed elements (R=396 mm, 50 mm wide, 5 mm thick, 30°) made of high-quality, sturdy yet flexible material. They ensure quiet, vibration-free train operation without disturbing noise and can be trimmed with a sharp knife if needed. The pack contains 12 identical elements.
On order
I-Track segments allow height differences in track building to be bridged and can be individually adjusted for grade or decline thanks to their modular supports. Thanks to their construction with two longitudinal beams, they are rigid, bend-resistant and load-bearing. The segments are supplied as a laser-cut plywood kit with illustrated assembly instructions.
On order
Curved track bed elements (R=353/396 mm, 93 mm wide, 5 mm thick, 30°) made of high-quality, sturdy yet flexible material. They ensure quiet, vibration-free train operation without disturbing noise and can be trimmed with a sharp knife if needed. The pack contains 12 identical elements.
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius R 396 mm, 1-track, base circle, 6 segments = 1 circle, build height: 85 mm, segment width: 60 mm, outer gradient: %, outer diameter: mm
On order