Exclusive dealer for Switzerland
I-Track, the structure of your layout, ready to assemble
Baseboards, track formations, track beds, helices and CarMotion roads: the plywood system by Hacker Model, assembled without any carpentry. All items are available to order.
- 843items available to order
- 4scales: H0, TT, N and Märklin C
- 6 and 16 cmthe two baseboard heights

What makes I-Track
- A precision system: Hacker Model Production, in Řevničov in the Czech Republic, designs I-Track as the basic structure of your layout: baseboards, frames and track formations cut to fit together.
- On several levels: baseboards 6 and 16 cm high, baseboards with a 26 cm hidden station, Rondela helices and ramps to go from one level to the next.
- For your track: track beds and segments for H0, TT, N and Märklin C track, Rondela helices for Märklin, Roco, Piko, Peco, Tillig, Fleischmann and Minitrix.
- CarMotion roads: road beds and asphalt plates for the Viessmann CarMotion system in H0, up to the complete module with its roads.
- Portable modules: modules on aluminium legs, quick to set up, easy to transport and store, and understructures in planed wood, 66 or 76 cm high.
- To order, with advice: online ordering coming soon. Until then, we advise you, order and deliver, or you collect your order in Rolle.
Catalogue to download
The whole system, layout plans and dimensions, in the manufacturer's documents.
- I-Track catalogue 2024: 40 pages, in German, English and Czech (PDF, 15.5 Mo)
- New for autumn 2026: 4 pages on CarMotion, in German and English (PDF, 3.5 Mo)
The I-Track families
Baseboards and structure
74 itemsBaseboards 6 cmThe base of the layout, rectangular or triangular, loose or already glued.See the items
55 itemsBaseboards 16 cmTaller, to house points, motors and wiring under the track.See the items
14 itemsBaseboards for turntablesCut for Roco, Fleischmann, Trix and Märklin turntables.See the items
24 itemsBaseboards with hidden stationA hidden station under the scenic level, 26 cm high.See the items
17 itemsSide wallsTransparent or solid walls to close baseboards and hidden station.See the items
65 itemsWooden understructuresPlaned wood, 66 or 76 cm high, to stand the baseboards on.See the items
22 itemsModules and control panelsModules on legs, starter boards for table layouts, control panels.See the itemsThe track formation
74 itemsH0 track formation segmentsStraights, curves, bridges and ramps to raise the H0 track.See the items
40 itemsSegments for Märklin CThe same formation, to the geometry of Märklin C track.See the items
52 itemsTT track formation segmentsStraights, curves and bridges to TT track radii.See the items
46 itemsN track formation segmentsStraights, curves and bridges to N track radii.See the items
56 itemsTrack bedsUnder the track, for H0, TT, N and Märklin C, straight and curved.See the items
76 itemsRamps and embankmentsRamps, embankments and track underlays for gentle gradients.See the items
82 itemsRondela helicesHelices to change level in a small space, from N to H0.See the items
90 itemsTemplates, spacers and postsLaying templates, spacers for parallel tracks and posts.See the itemsCarMotion roads
76 itemsCarMotion road bedsThe road elements that guide the CarMotion vehicles.See the items
34 itemsAsphalt road platesThe finished road surface, with or without a zebra crossing.See the items
44 itemsCarMotion segments and modulesMounting posts, segments, holders for the charger, complete modules.See the itemsAll I-Track items
The ramp is made of a high-quality, stable yet flexible material and does not require any additional reinforcement. It ensures smooth, vibration-free train operation and can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or CA glue. Ramps are available with gradients of 2.2%, 3.0% and 4.4%; the FLEXI versions can additionally be individually adapted to the course of the track plan.
On order
The ramp is made of a high-quality, stable yet flexible material and does not require any additional reinforcement. It ensures smooth, vibration-free train operation and can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or CA glue. Ramps are available with gradients of 2.2%, 3.0% and 4.4%; the FLEXI versions can additionally be individually adapted to the course of the track plan.
On order
The ramp is made of a high-quality, stable yet flexible material and does not require any additional reinforcement. It ensures smooth, vibration-free train operation and can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or CA glue. Ramps are available with gradients of 2.2%, 3.0% and 4.4%; the FLEXI versions can additionally be individually adapted to the course of the track plan.
On order
The ramp is made of a high-quality, stable yet flexible material and does not require any additional reinforcement. It ensures smooth, vibration-free train operation and can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or CA glue. Ramps are available with gradients of 2.2%, 3.0% and 4.4%; the FLEXI versions can additionally be individually adapted to the course of the track plan.
On order
The ramp is made of a high-quality, stable yet flexible material and does not require any additional reinforcement. It ensures smooth, vibration-free train operation and can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or CA glue. Ramps are available with gradients of 2.2%, 3.0% and 4.4%; the FLEXI versions can additionally be individually adapted to the course of the track plan.
On order
The FLEXI ramp is made of a high-quality, very stable and flexible material. The elements do not need any further reinforcement and ensure smooth, vibration-free train operation. They can be cut with a sharp knife or hot wire, glued with hot-melt adhesive or Hacker CA glue, and easily adapted to the course of your track plan.
On order
The ramp is made of a high-quality, very stable and flexible material. The elements do not need any further reinforcement and ensure smooth, vibration-free train operation. They can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or Hacker CA glue; a FLEXI version also allows easy adaptation to the course of your track plan.
On order
The FLEXI ramp is made of a high-quality, very stable and flexible material. The elements do not need any further reinforcement and ensure smooth, vibration-free train operation. They can be cut with a sharp knife or hot wire, glued with hot-melt adhesive or Hacker CA glue, and easily adapted to the course of your track plan.
On order
The railway embankment is made of a high-quality, very stable and flexible material. The elements do not need any further reinforcement and ensure smooth, vibration-free train operation. They can be cut with a sharp knife or hot wire and glued with hot-melt adhesive or Hacker CA glue; a FLEXI version also allows easy adaptation to the course of your track plan.
On order
The railway embankment is made of a high-quality, very stable and flexible material. The elements do not need any further reinforcement and ensure smooth, vibration-free train operation. They can be cut with a sharp knife or hot wire, glued with hot-melt adhesive or Hacker CA glue, and easily adapted to the course of your track plan.
On order
The embankment is made of a high-quality, very stable yet flexible material that can be installed without additional reinforcement and ensures quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued easily with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very stable yet flexible material that can be installed without additional reinforcement and ensures quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued easily with hot-melt adhesive or Hacker CA glue. The FLEXI version can be easily adapted to the individual course of your track plan.
On order
The embankment is made of a high-quality, very stable yet flexible material that can be installed without additional reinforcement and ensures quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued easily with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very stable yet flexible material that can be installed without additional reinforcement and ensures quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued easily with hot-melt adhesive or Hacker CA glue. The FLEXI version can be easily adapted to the individual course of your track plan.
On order
The embankment is made of a high-quality, very stable yet flexible material that can be installed without additional reinforcement and ensures quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued easily with hot-melt adhesive or Hacker CA glue.
On order
The railway embankment is made of a high-quality, very stable yet flexible material that can be installed without additional reinforcement. It ensures smooth, vibration-free and quiet train operation. The FLEXI version can be easily adapted to the course of the track plan and cut with a knife or hot wire.
On order
The railway embankment is made of a high-quality, very stable yet flexible material that can be installed without additional reinforcement. It ensures smooth, vibration-free and quiet train operation. It can be cut with a knife or hot wire and glued easily with hot-melt glue or Hacker CA adhesive.
On order
The railway embankment is made of a high-quality, very stable yet flexible material that can be installed without additional reinforcement. It ensures smooth, vibration-free and quiet train operation. The FLEXI version can be easily adapted to the course of the track plan and cut with a knife or hot wire.
On order
The extendable control panels are specially designed for the I-Track base plates in sizes 100x80, 100x90, 120x80, 120x90 and 120x100 cm, and are available in three versions: as a tablet holder (up to 12"), for switches and push buttons, or for switches, push buttons and a Roco/Fleischmann turntable controller. They are supplied as a kit with illustrated assembly instructions and fit directly into the grooves of the base plate; a safety mechanism prevents accidental complete extraction.
On order
The extendable holder is specially designed for the I-Track base plates (100x80, 100x90, 120x80, 120x90, 120x100 cm) and is supplied completely disassembled for easy assembly. Once the side parts are glued, it slides directly into the grooves of the base plate and can be pulled out or pushed back as needed; the front panel is designed for switches, push buttons and a Roco/Fleischmann turntable controller. Gluing is done with standard wood glue or Hacker CA adhesive.
On order
Retractable holder designed for I-Track base plates in sizes 100x80, 100x90, 120x80, 120x90 and 120x100 cm, available as a tablet stand (up to 12"), for switches and pushbuttons, or for switches, pushbuttons and turntable controller. Supplied as a kit with illustrated instructions, to be glued with wood glue or Hacker cyanoacrylate glue.
On order
Fixed holder allowing comfortable and stable placement of a tablet or smartphone above the tracks of the I-Track system, available as a tablet stand (up to 12"), for switches and pushbuttons, or for switches, pushbuttons and Roco/Fleischmann turntable controller. Supplied as a kit with illustrated instructions, to be glued with wood glue or Hacker cyanoacrylate glue.
On order
Fixed holder allowing comfortable and stable placement of a tablet or smartphone above the tracks of the I-Track system, fitted for switches, pushbuttons and Roco/Fleischmann turntable controller. Supplied as a kit with illustrated instructions, to be glued with wood glue or Hacker cyanoacrylate glue.
On order
Fixed holder allowing comfortable and stable placement of a tablet or smartphone above the tracks of the I-Track system, fitted for switches and pushbuttons. Supplied as a kit with illustrated instructions, to be glued with wood glue or Hacker cyanoacrylate glue.
On order