Exclusive dealer for Switzerland
I-Track, the structure of your layout, ready to assemble
Baseboards, track formations, track beds, helices and CarMotion roads: the plywood system by Hacker Model, assembled without any carpentry. All items are available to order.
- 843items available to order
- 4scales: H0, TT, N and Märklin C
- 6 and 16 cmthe two baseboard heights

What makes I-Track
- A precision system: Hacker Model Production, in Řevničov in the Czech Republic, designs I-Track as the basic structure of your layout: baseboards, frames and track formations cut to fit together.
- On several levels: baseboards 6 and 16 cm high, baseboards with a 26 cm hidden station, Rondela helices and ramps to go from one level to the next.
- For your track: track beds and segments for H0, TT, N and Märklin C track, Rondela helices for Märklin, Roco, Piko, Peco, Tillig, Fleischmann and Minitrix.
- CarMotion roads: road beds and asphalt plates for the Viessmann CarMotion system in H0, up to the complete module with its roads.
- Portable modules: modules on aluminium legs, quick to set up, easy to transport and store, and understructures in planed wood, 66 or 76 cm high.
- To order, with advice: online ordering coming soon. Until then, we advise you, order and deliver, or you collect your order in Rolle.
Catalogue to download
The whole system, layout plans and dimensions, in the manufacturer's documents.
- I-Track catalogue 2024: 40 pages, in German, English and Czech (PDF, 15.5 Mo)
- New for autumn 2026: 4 pages on CarMotion, in German and English (PDF, 3.5 Mo)
The I-Track families
Baseboards and structure
74 itemsBaseboards 6 cmThe base of the layout, rectangular or triangular, loose or already glued.See the items
55 itemsBaseboards 16 cmTaller, to house points, motors and wiring under the track.See the items
14 itemsBaseboards for turntablesCut for Roco, Fleischmann, Trix and Märklin turntables.See the items
24 itemsBaseboards with hidden stationA hidden station under the scenic level, 26 cm high.See the items
17 itemsSide wallsTransparent or solid walls to close baseboards and hidden station.See the items
65 itemsWooden understructuresPlaned wood, 66 or 76 cm high, to stand the baseboards on.See the items
22 itemsModules and control panelsModules on legs, starter boards for table layouts, control panels.See the itemsThe track formation
74 itemsH0 track formation segmentsStraights, curves, bridges and ramps to raise the H0 track.See the items
40 itemsSegments for Märklin CThe same formation, to the geometry of Märklin C track.See the items
52 itemsTT track formation segmentsStraights, curves and bridges to TT track radii.See the items
46 itemsN track formation segmentsStraights, curves and bridges to N track radii.See the items
56 itemsTrack bedsUnder the track, for H0, TT, N and Märklin C, straight and curved.See the items
76 itemsRamps and embankmentsRamps, embankments and track underlays for gentle gradients.See the items
82 itemsRondela helicesHelices to change level in a small space, from N to H0.See the items
90 itemsTemplates, spacers and postsLaying templates, spacers for parallel tracks and posts.See the itemsCarMotion roads
76 itemsCarMotion road bedsThe road elements that guide the CarMotion vehicles.See the items
34 itemsAsphalt road platesThe finished road surface, with or without a zebra crossing.See the items
44 itemsCarMotion segments and modulesMounting posts, segments, holders for the charger, complete modules.See the itemsAll I-Track items
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius R 396 mm, 1-track, add-on circle, 6 segments = 1 circle, build height: 85 mm, segment width: 60 mm, outer gradient: %, outer diameter: mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. TT track radius R 396 mm, 1-track, base circle, 9 segments = 1 1/2 circles, build height: 122.5 mm, segment width: 60 mm, outer gradient: %, outer diameter: mm
On order
I-Track segments are the ideal trackbed building elements, letting you bridge any terrain shape and easily change levels on your layout. Thanks to their special construction with two longitudinal beams, the segments are very rigid, bend-resistant and load-bearing, and are supplied as a kit in laser-cut plywood with an illustrated assembly guide.
On order
I-Track segments are the ideal trackbed building elements, letting you bridge any terrain shape and easily change levels on your layout. Thanks to their special construction with two longitudinal beams, the segments are very rigid, bend-resistant and load-bearing, and are supplied as a kit in laser-cut plywood with an illustrated assembly guide.
On order
Base supports No. 1 to 12, height 16 to 81.1 mm, set of 12 pairs. They are used for the basic adjustment of the pitch angle and the track level, as well as for building a Rondela spiral climb.
On order
Extension height 71 mm + coupling, set of 12 pieces. The stacking supports are suitable for the next level of the Rondela as well as for the track level.
On order
Extension height 71 mm + coupling, set of 4 pieces. The stacking supports are suitable for the next level of the Rondela as well as for the track level.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order
Railing bracket, 12 pieces.
On order
SE supports for easy assembly of the upper transition segments of the Rondela helix, providing a smooth transition from the gradient to the level section. This version is designed for the 360° Rondela (1 base circle) and can be raised by additional levels using the SR extension supports. Use standard wood glue or Hacker cyanoacrylate glue for gluing.
On order
SE supports for easy assembly of the upper transition segments of the Rondela helix, providing a smooth transition from the gradient to the level section. This version is designed for the 540° Rondela (1.5 base circles) and can be raised by additional levels using the SR extension supports. Use standard wood glue or Hacker cyanoacrylate glue for gluing.
On order
The ramp is made of a high-quality, sturdy yet flexible material that ensures smooth, vibration-free train operation without disturbing noise. It can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue. Available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramp is made of a high-quality, flexible material that ensures smooth, vibration-free train operation. The FLEXI version can easily be adapted to the course of the track plan, cut with a sharp knife and glued with hot-melt adhesive. Available with gradients of 2.2%, 3.0% and 4.4%.
On order